Cannot contact the DNS server?

Similar Questions

• Error - cannot locate the DNS server of comments when try to use the Windows XP Edition computer remotely family assistance.

  Original title: cannot locate the comments of my windows xp home dns server.

  We have all two windows xp home, only difference, I can say is in the exception of firewall computers comments tab, there is no box remote assistance to check or uncheck.
  whenever we try I get it's message. Could not locate dns comments.
  something terribly simple became simply terrible.
  Thank you

  THANKS A LOT FOR YOUR CONTINUOUS SUPPORT. USING WINDOWS MESSENGER AND ACTIVATE THE REMOTE ASSISTANCE, AFTER FLUSHING DNS CACHE, WE HAD NO CONNECTION PROBLEM. ALTHOUGH STAY CONNECTED WAS A PROBLEM. NOW IDENTIFIED AS THE NETWORK ADAPTER ITSELF IS DEFECTIVE. I WAS ABLE TO SOLVE MOST OF THE QUESTIONS ON MY FATHER'S COMPUTER, IMPOSSIBLE WITHOUT YOUR TUTALIDGE. SO I HUMBLY GIVE THANKS TO PEOPLE LIKE YOU WHO UNSELFISSLY GIVE THEIR TIME. I AM OF COURSE SPENT ON CREDIT TO MY FATHER AND OTHERS SO THAT THEY TOO WILL SHARE THIS EXPERIENCE WITH OTHERS. AT THE PRESENT TIME, HE HAPPILY TALKS TO FRIENDS IN THE OLD COUNTRY IN THIS ONE. HIS 'SOCIAL' NETWORK ONCE MORE ALIVE WITH OLD FRIENDS. Thank you very much.
  RON

• Cannot contact the primary DNS 64.13.4.5

  Operating System: Windows Vista Version: Internet Explorer 8

  

  Just today I started having intermittent problems with my internet connection while playing an online video game.  Then he stopped just working altogether.  He cannot communicate with the DNS server.

  I called my ISP and determined that it was my machine.  I plugged in my laptop (windows xp) and it works fine.

  Here is the ipconfig/all command to the broken machine

  C:\>ipconfig/all

  Windows IP configuration

  Name of the host...: *-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Marvell Yukon 88E8056 PCI-E Gigabit Ether
  Net controller
  Physical address.... : 00-19-21-54-54-A9
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  IPv4 address...: 64.13.4.226 (Preferred)
  ... Subnet mask: 255.255.254.0.
  Lease obtained...: Friday, October 29, 2010 21:00:20
  End of the lease...: Saturday, October 30, 2010 21:00:20
  ... Default gateway. : 64.13.4.1.
  DHCP server...: 64.13.4.6.
  DNS servers...: 64.13.4.5.
  64.13.115.12
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {59491320 FDB5-405-AD8F-A5AA7722D
  0 C 3}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:400d:4e2:400d:4e2 (Preferred)
  ... Default gateway. :
  DNS servers...: 64.13.4.5.
  64.13.115.12
  NetBIOS over TCP/IP...: disabled

  C:\ >

  ... And here is the ipconfig/all command for my laptop that works fine.

  C:\>ipconfig/all

  Windows IP configuration

  Host Name . . . . . . . . . . . . : ****
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8139/810 x Family Fast Eth
  ernet NIC
  Physical address.... : 00-16-36-07-D6-C9
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 75.93.168.202
  ... Subnet mask: 255.255.240.0.
  ... Default gateway. : 75.93.160.1.
  DHCP server...: 64.13.4.6.
  DNS servers...: 64.13.4.5.
  64.13.115.12
  Lease obtained...: Tuesday, September 28, 2010 02:09:10
  PM
  End of the lease...: Wednesday, 29 September 2010 09: 2.1
  0 H

  Ethernet wireless network connection card:

  State of the media...: Media disconnected
  ... Description: Broadcom 802. 11b / g WLAN
  Physical address.... : 00-14-A5-60-BD-35

  C:\ >

  I tried a technical support at the ISP, they concluded that the problem is with my computer...

  I tried

  system restore

  NETWORK card driver update

  disable TCP Window Scaling

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  netsh winsock reset catalog

  netsh int ipv4 reset reset.log

  netsh int ipv6 reset reset.log

  I can't ping any Web site, including DNS or gateway, or live.com, using the IP address or other.

  I can ping 127.0.0.1

  I also tried to adjust my computers IP to non-working parameters exactly as it is on my laptop, nothing works

  nothing seems to work:(serait-ce une sorte de défaillance matérielle?) Device Manager indicates that the NETWORK adapter does not work correctly

  I bought a new NETWORK card, and it works with the new NIC. weird

• Unable to connect to the internet, the dns server is not responding

  Hello

  It is the second system I've seen in the last two weeks with this question, I reloaded the OS on the first.  The system is Windows Vista Ultimate x 64.

  That is the problem.  Open Internet Explorer 9 on a Windows 7 PC, you get the message:

  Internet Explorer cannot display this webpage

  Click on diagnose connection problems, you get the following:

  The DNS server is not responding

  Look at a detailed information your told to contact your network administrator (this is me - no other XP or Windows 7 PC on the network has a connection problem).

  Below that is the message:

  Your computer is trying to use a DNS server that is incorrect or does not exist.

  Note that this is a laptop that has started on another network with the same problem.  I took it to my office to solve problems.  My DNS server is a WIndows SBS 2003 server.

  Below that is a log file of etl you cannot open (Notepad considers undesirable, much of the use that is).

  The steps I did to try to resolve the problem.

  Virus system scan

  There is no hosts file, I've recreated which.

  The static value IP and DNS.

  I can ping the DNS server by its IP address, but not by name.

  I put the DNS address to 208.67.222.222

  Restored network drivers

  Reininstalled all network drivers

  Disable Microsoft Virtual WiFi adapter

  Any suggestions would be helpful.

  the

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to reset the DNS cache by using the following steps and check it, if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER: ipconfig/flushdns

  c. you will see the following confirmation:

  Windows IP configuration

  With success, emptied the Cache of DNS resolution.

  Method 2:

  Try the following steps to release and renew the IP address and check if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER:
  - enough ipconfig at the command prompt and of the press ENTER
  - ipconfig / renew in the command prompt and press ENTER

  c. check if the problem is resolved.

  Hope the information is useful.

• I can't access the DNS server

  I install AD and by default it also install DNS and I turn off DHCP on the router of LDC and configure the server.

  I have two NIC configured with IP address:

  8.8.8.8 and 10.x.x.x IP links

  1 NIC 10.x.x.x

  subnet mask 255.255.255.0

  DNS: 8.8.8.8

  2 Nic 8.8.8.8

  Subnet mask 255.255.255.0

  DNS 8.8.8.8

  I can not access the PC Client dns server, but can access the internet directly from the dhcp server, I can ping the dns 8.8.8.8 IP address but cannot access the domain. I want the client to connect to the dns server so that it can be easy to manage and add security measures. Can any expert server help me with that.

  Hello

  Thanks for posting in the Microsoft Community.

  This problem is better suited in the Microsoft TechNet forum, we have a dedicated team with advanced tools and permissions to help you with such questions.

  Post your request in the TechNet forum from the link below:

  TechNet forums

• NB200-h-13 - no response from the DNS server and gateway

  Hello

  I have netbook NB200-h-13 with XP SP3. Its impossible to connect to wireless internet and the error messages are
  HE DIDN'T THERE WAS NO RESPONSE FROM THE DNS SERVER
  HE DIDN'T THERE WAS NO RESPONSE FROM THE DEFAULT GATEWAY

  The connection with the ethernet cable is ok with the adpter reltek that also adpter atheros ar9285 WiFi is activation, working properly and the modem router signal is strong.

  Hi abk55,

  What program you receive this error message?
  Have you tried another browser, for example Firefox or Opera?

  I guess it has something to do with your wireless network card or WLAN parameters if the LAN cable is working properly. So you should try to update the WLAN driver on the Toshiba site.
  Also, try to disable the filtering of MAC addresses and use another encryption.

• What it means that the DNS server instead sends a node adapter directly status request to the IP address?

  What it means that the DNS server instead sends a node adapter directly status request to the IP address involved in the reverse DNS query. When the DNS server gets the NetBIOS name of the node status response, it adds the DNS domain name specified in the WINS - R record the NetBIOS name provided in the node status response and passes the result to the client applicant. ?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• I have a yellow exclamation mark on my wireless and signal when I diagnose the problem that Windows says 'the DNS server does not. Can anyone help?

  I have our computer server set to a static ip address, because our printers work on the network. Every time I try to connect to the internet Windows tells me "the DNS server is not responding. Can someone help me?

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

• How can I keep a connectivity when the DNS server is not available?

  We have remote locations with several computers that are joined to our domain via a gateway to gateway VPN. When VPN breaks down, they lose the connection to our CD/DNS server. Their ip addresses remain the same, since they are managed by their local router but they failed to connect to other devices to their location even though the devices have static IP addresses. If I understand the use of the LMhosts file must allow me to allow them to keep local communications between computers. I think the entry in LMHOSTS should be like this for each local machine they need to access.

  10.0.0.1 SampleEntry #PRE
  Is there a better way to solve this problem, however?

  Hi Jim,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with connectivity indomain computers when the DNS server is not available.

  As the computer is connected to the domain network, the question you posted would be better suited in the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Errro: Cannot save the Terminal Server when he tried to use the program Sony Vegas

  Original title: cannot save the Terminal Server.

  I'm having a problem using my program "Sony Vegas". It worked OK. But now gives me an error. "Cannot save the Terminal Server. I don't know if this a problem of Windows, or Sony Vegas. Please tell us how to solve this problem. Thank you.

  Hi barnstable,.

  Try these steps and check the result.
  Step 1: Check if the Terminal Services service is disabled
  a. Click Start, click Run.
  b. type services.msc, and then click ok.
  c. in the list of services, double-click Terminal Server Services.
  d. change the startup type to automatic and start the service.
  e. click ok to apply the changes.
  f. check if the problem persists.

  Step 2: If the problem persists, uninstall and reinstall the program Sony Vegas
  see How to change or remove a program in Windows XP .
  b. Once you have deleted the program, restart the computer.
  c. reinstall the program.

  For additional support, get in touch with Sony support team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The DNS server is not responding.

  Just bought this WRT160N a few days ago, I implemented and no problems now, randomly, I can't the internet to work, every once in awhile, he will work for a few minutes, then it will return new.  When I troubleshoot Windows, I have "the DNS server is not responding" * detected * this computer is located on a wired connection to my router, and is currently the only computer connected to my router.  The connection works fine when I run the cable directly from my modem to the computer (which im doing now) any help would be greatly appreciated!

  To upgrade the firmware of your router, you don't need to be connected to Internet... Just connect the Modem to the computer and download the firmware on your router... Once you have downloaded the firmware on your router... Connect the Modem to the router on the Internet Port and connect the computer to the router Linksys on Port n ° 1... Follow the instructions I mentioned in my previous post, how to upgrade the firmware on your router... Once the firmware is upgraded successfully... Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• The DNS server does not respond?

  Often my internet connection fails completely. It connects to any kind of Web site when it arrives. I use the option to "solve problems", and discovered that the DNS server is not responding. So he says. It happens all the time and I can't fix it myself. Can I get some advice? Maybe even a complete solution?

  Hi Jim,.

  Did you of recent changes to the computer?

  I suggest that you try the procedure described in the article below.

  Method 1:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Please refer to suggestions of Vinod gwenaëlle replied on 10 March 2012

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/the-DNS-server-ISN

  Additional information:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-CA/Windows/cant-connect-Internet#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you

• The DNS server does not - wired - wireless is OK

  Hi all

  This problem has left speechless several other computer scientists, I thought I'd try this forum before making a complete reinstallation.  Here's a challenge to test your intelligence.

  Here's the situation:

  Dell laptop (11 months - still under warranty) with Wi - Fi and ability.  Originally supplied with Vista, but I installed Win7 in November.  I tried to do the clean installation method, but do not know if I managed to 'clean' approach because I thought that my data may be wiped.  He was not, he is still on the machine.  But W7 seems to work very well, I added Slowey some software.  I think I was able to communicate with a wired connection before on the machine, but now I can't be sure.  The machine communicates wireless without problem.  IE8 opens fine.  If I connect the wire and cut the antenna or boot to the wire with antenna, the machine starts and works well, but does not connect using IE8.  I get a message "the DNS server is not responding.

  The machine can ping and ping just fine on the wire.  A chat session with Dell yesterday (Citrix I think) succeeded in transferring to wire wireless when I turned off the antenna.  In addition, the MS patch notification came through this morning, but I can't download the patches on the wire.

  Here is what has been tried so far:

  1. Changed cables and ports in the router to check the status of these question: these are OK.
  2. PC directly connected to the router: same problem.
  3. Verified services running (Control Panel-Admin tools-Online Services online):
     System event COM + (for WZC issues)
     Computer browser
     DHCP client
     DNS client
     Network connections
     Network location awareness
     Remote procedure call (RPC)
     Server
     TCP/IP Netbios support
     Automatic configuration wireless (only XP wireless configurations)
     Autoconfiguration WLAN (wireless Vista only configurations) service
     Workstation
  4. Verified IPv4 is defined in order to obtain the IP address automatically.
  5. Reset IE8.  No change.
  6. Turned off the Windows Firewall.
  7. Tried to access internet using Chrome.  No go.
  8. Wired NETWORK card uninstalled and reinstalled driver.  Downloaded last at Dell, they pushed also later.  No luck.
  9. Tried the Google Open DNS.  No difference.
  10. ipconfig/flushdns
  11. TCP/IP stack repair (run as Administrator: start, all Programs\Accessories and right click on command prompt, select "run as administrator" to open a command prompt.)
      -Entries reset WINSOCK to default installation: netsh winsock reset catalog
      -Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log
      -Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log
      
  12. While in Safe Mode, disconnected wire: uninstalled the driver for the CARD.  Started full W7: installed the latest driver.
  13. In Safe Mode, the stack TCP/IP repair as described above.

  All to nothing does not.  IE does not connect to the internet.  Chrome is not connecting to the internet.

  You people have any ideas what the devil is wrong with this machine?  Can you offer any suggestions to try to get access wired for the functioning of the internet?

  Thanks in advance!

  Hello Stringout,

  I said to reset the router because the router is the DNS server and assigns the IP address to all devices on the network. Now, since you get the error "DNS server is not responding. It may possible that this router is not able to assign the correct ip address to all computers.

  You can also try to update the router with the latest firmware. Still, Microsoft!

• When I "play to" my TV, it stops at "contacting the media server.

  I have a laptop XPS L520X with Intel Core i7 2630QM, 6 GB of RAM and Windows 7 Professional.

  First of all, I was able to play songs or videos on my Sony Bravia KDL32 EX720, using the "play to".  (although not now)

  I can still play them if I access it from my TV.
  If I try to play a video using 'Play To', I get the message "contacting the media server" and nothing happens. (I can play the video even if I do it through my TV).
  I think my TV is a DMR (Digital Media Renderer) because as mentioned I could "play to" earlier.
  I tried:
  1. How do I remove my computer from the list of TV and then add it again.
  2. how remove my Windows Media streaming player TV list and then add it again.

  Hello Arpit Chauhan,

  ·         Have you tried to play the files other than .mp2, .mp3 and .mp4 file types?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow these steps and check if the voila.

  a. closed Windows Media Player 12.

  b. go to Services [->Control Panel->system and security->Administrative ToolsServices]

  c. find the service named "Windows Media Player Network Sharing Service"

  d. stop the Service manually.

  e. Locate the "UpnP device host"service. Stop the service and the Start again.

  f. run "Windows Media Player Network Sharing Service" now.

  g. close windows all associated and the Panel. Open Windows Media Player... right click on a playlist and see if the Play option lists the TV.

  Try to play now and check if it works.

  Method 2: If you try to install the game then I suggest you to install in clean boot state and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Method 3: I suggest you to temporarily disable the antivirus software (and any other security software) and the firewall on the computer and see if that fixes the problem.

   

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know the results.

• Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist?

  Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist? help someone?

  If it is hosted by GoDaddy, it's maybe out of service. There is a DDoS (denial of Service) attack to GoDaddy for the moment.

  You could try again later and see if it returns.