Cannot copy files from a corrupted on a new user acct

Similar Questions

• Cannot copy files from HD to CD by using wizard.

  Original title: not accessible - incorrect function.

  Cannot copy files from HD to CD by using wizard. Have been able to do for a long time. Without warning is no longer possible.

  Hello

  The format of the files you want to copy basically described what kind of files they are. Word documents, of .mpg, jpeg, etc.
  However, it seems that the problem is with the drive itself, not individual files.

  You happen to have any installed Roxio program? Specifically, Roxio Easy CD Creator?
  If so, you should remove this program, restart the computer and try again.
  I hope this helps!

• Cannot copy files from C drive to external hard drive

  Original title: backup on external hard drive

  Can someone tell me how you back up C: drive of your computer on a hard drive external?  Unable to find mention of this anywhere.  Tried a right 'copy' but that doesn't seem to work.  Thank you.

  Hello

  1. what exactly is the error message you get?

  2. in which the reader is the installed operating system?

  Operating system files can be copied to another drive. If it is installed in the c drive, and if you try to copy as well, then try to copy only your personal files such as photos, emails.

  Respond with more information so that we can better help you.

  I suggest you to use the engine to find a software for creating image of your favorite search system.

  Warning: Using third-party software can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also use the Windows Easy Transfer to transfer files.

  It automatically copy your files, photos, music, e-mail, settings, and more to your new Windows Vista PC based. This software allows you to transfer data with cables of simple transfer or through a network, external drive, or a CD/DVD.

  See the following site:

  Windows Easy Transfer for Windows XP

  http://www.microsoft.com/en-us/download/details.aspx?id=7349.

• The VM cannot copy files from a network share on the host

  I get the error "unable to copy xyz123: cannot read from the source file or disk.» When you try to copy a file to a shared folder.

  • The shared folder is located on the machine called VM-SERVER, which runs in Workstation 6.0.4. The folder is shared with everyone having full control. Security settings say that DOMAIN\Domain users also have complete control.

  • Any user who connects to any guest VM on VM-SERVER, which is the host of all the VMS in the Organization, can not access the file for copying, although registration to the directory is there (although slow to come). If the same user connects to any other computer on the network, any computer of VM-no-prompt, then he can access the files on the share on VM-SERVER with no problems.

  • VM' are the guest all configured with Bridged networking like they serve other users on the network. I disable the VMWare adapters. I insert the DisableDos key with a value of 1 as indicated by the FAQ, I restart the VM host operating system and the virtual computer guests.

  • VM-SERVER running Windows Server 2003 R2 x 64. It has 2 1 TB SATA drives, and the action in question is physically located on the D: drive.

  • The VM guest OS are XP Sp3, Vista Sp1, Windows Server 2003 R2 x 32 Business.

  • None of these comments VM are able to access the contents of the files on the share on VM-SERVER.

  • All computer virtual guests are able to access shares located on another server, the primary domain controller of the network that is running Windows Server 2003 R2 x 32.

  Accordingly, I'm worried because the concept of the virtual computer for critical business was my decision and up to the exception of this scenario (and a recently resolved USB printing problem) it went well. Unfortunately even a mess can stop production.

  Note that I have read the FAQ and tried the suggestions that seemed to apply.  I also looked in the forums and haven't seen a specific question/answer.  If there is an answer out there and you read this point please make me, orperhaps you have another suggestion?  I am open to all theories and possible solutions.

  jorilla wrote:

  The card is a RealTek RTL8139/810 x Family Fast Ethernet NIC driver 5.699.717.2008 Version

  Maybe see if a new NIC driver help? I see that 5.707 (2008/11/24) seems to be available:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=6&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  ====

  Is there anything in the event logs of the host?  I know that before I did this DisableDOS registry change on my server I've seen a lot of errors in the event log.

• Cannot copy files from my laptop on external drives

  I am trying to copy my laptop on USB / HDD (any file, any size), but unable to do the same. Error: Impossible to proceed, please check if the disc is write protected. But when the same flash drive or a hard drive is used in the other laptop / PC to cope, his works very well. How to solve the problem with my laptop? Please suggest...

  Made laptop: Toshiba, WinXP... bit32

  I'm running out of ideas, but I found a site with other suggestions.  Try the following:

  <>http://www.Centon.com/support/resources/product-forum/2-FAQ/21-USB-drives-being-reported-as-write-protected >

  HTH,

  JW

• Cannot copy files from Windows XP during installation.

  While Windows reset through the repair track (not the console repair) using the original disk of XP, 44 files could not be copied. I turned off the antivirus Avast. Then again 29 files (including the migregdb.ex_) could not be copied. Once the process is completed the win XP works, I can connect to the internet and exploit all the programs, BUT research, help and Support, and then Windows Update stopped working. No idea how to overcome the problem of file copy will be appreciated.
  Alex

  Hello

  Disconnect all external devices to your computer and see if it works.

  You can also use a different Windows XP installation disk and check if the problem exists.

• Cannot copy files from the old hard drive to new

  Original title: crash and recovery of hard drive problem

  My hard drive crashed it wouldn't boot saying config.sys is damaged or corrupted, I tried to fix it but the sector is damaged. I was using XP, I had a password on my settings. I installed a new hard drive and reinstalled windows XP, but even if I can 'see' the old hard drive (always installed) I can't access my documents, how can I get to them? I know the password but since its an account on another drive it won't give me the chance to log on to the account.

  Assuming that you use the Encrypting File System (EFS) then this article should solve your problem:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• Cannot copy files from a USB USB Kingston on WD external hard drive

  When I try to copy large groups of a Kingston DT101 (32 GB Tumbdrive) files on an external hard drive WD (WD3200MLSP: 32 GB) the computer does nothing and there is no "Copy" dialog box I've uninstalled and reinstalled the drivers but it does not work. However, when I copy only the sections of the USB hard disk, then copy works. I use the Ctrl + C to copy the files and the light on the USB flashes on then off. Then, when I navigate to the folder on the hard drive and I press Ctrl + V to paste the files, the light on the USB key turns on and remains lit. However, the lights on the hard drive WD do nothing.

  It depends on the size of the file.

  It files are 4GBs or more and the player is formatterd to FAT32, it will not transfer due to limitations of size of FAT32 file transfer...

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot copy files from USB key!

  I have a picture of game size 4.17 GB. When I was trying to transfer it to my USB drive (16 GB), it displays message that the drive is full, so that only 8 KB was filled. I tried to copy another image of the game, but the same thing happened. Other files and songs, movies can be easily transferred but not game footage. Help, please!

  Pendrives are usually formatted in FAT32. FAT32 is limited to files under 4 GB. This is probably your problem.

• Bridges, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? No Tech phone today?

  To all

  In Bridge, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? (No phone Tech Saturday?)

  Thanks for the quick responses today from anyone in the community,

  -Mark, Portland Oregon

  Please provide details: you are not trying to change the file type by changing just the extension, are you?  That won't work of course,

  Either you try to run some type of script?

  To change a file type, you have TO open the file in Photoshop and do save as.  That can be automated.

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How can I copy files from project Waveburner to another internal drive?

  How can I copy files from project Waveburner to another internal drive without losing the connection to the files audio orig.?

  Thank you for your time,

  Since no one answered my call, I sat and researched and studied WaveBurner behavior and I can myself answer my question and solve. Since there were a lot of people asking similar questions on WaveBurner files I will post what I learned.

  Whenever you drop your audio files in the list window to make your WaveBurner CD copy not copy your audio files, but relies on the original audio file, where they are located. So whenever you move the files orig. and you open WaveBurner, it can't find those and displays an error window to suggest it will search for the missing file or if you know where he is now lets you find manually. WaveBurner usually place the .wb3 project file that contains everything including your home folder.

  For this reason, I reserve now an audio file WaveBurner also folder in my home folder. In order to save themselves from WaveBurner cannot find the audio file, all audio files that I do, I put in my folder of audio files WaveBurner first, then copy them in WaveBurner from there.

  When I need to use a bigger hard drive I copy .wb3-WaveBurner projects based, but also my

  Sound folder WaveBurner for the home folder on the new hard drive.

  WaveBurner is now all audio files without problem.

  I hope that this will be a unique problem to someone else. Happy WaveBurning.

  W.W.

• Errro message "cannot copy file: path is too deep.

  Inequality on the what, why, how do to the error message "cannot copy file: path is too deep." I would like to know the causes and possible prevention and or all of the information available on this issue. The problem occurs when copying large files and sometimes small files on external hard drive to the top.

  Even though the file itself may become a 9-character file name extension, it could be buried inside several files.  Thus, when you step on your external USB drive and it appears as, say, M: drive, the number of characters in the complete path to the file starting with "M:\. "and including all of the directories in the path to the file as well as the number of characters in the name of the file itself must not exceed 255 or Windows refuses to handle.

  Robocopy is a command line program.  You must type in the command from a command prompt window (start-> Run-> "cmd").  It works by accessing the file using a set of routines to copy the different library that does not have the limit of 255 characters.  A documentation file must accompany Robocopy explaining how to use it.

  Another method that might work for you is to take the folder that your .wmv file is in (or maybe both files above) and to temporarily move to the root directory of your external hard drive.  This shorten the path to the file and allow a normal copy of work.

  HTH,
  JW

• I m a new user of macbook. I can´t copy files from my mac to an external drive

  I can´t copy files from my mac to an external hard drive.

  I followed the instructions in the help, but I can't change the license to write / read of read-only, the locking doesn´t appear on my screen of inf.

  really I m very disappointed with this machine because I can´t find the apple online support.

  I tried searching you tobe to the google search, and I can't do it!

  any body can help me please?

  Select the drive in the Finder and select the get info in the file menu.

  If it is the Windows NT file system format, install software such as Paragon NTFS on the computer or reformat the hard disk.

  If it's in a different format, choose Utilities in the Finder Go menu, open disk utility and use the repair disk function or first aid in this regard.

  (143023)