Cannot cover the Photosmart 3310

Similar Questions

• Cannot print from MacBook Air on the Photosmart 3310 network

  My MacBook Air can connect and print via the USB port on my HP Photosmart 3310 printer, but it can not connect via the URL on the wired home network. The printer is connected to our home network and works perfectly with several other PCs, wired and wireless. Using the option of printing and scanning in system preferences, I chose the icon IP and entered the URL of the printer: http://192.168.1.10 (tried with and without the http://). Under the protococol, chose Internet Printing Protocol - IPP (also tried the other options). Use the default name (address echo). Location in the basement and selected "HP Photosmart3300 series" as being the solution of printer software.

  After the implementation of break, I get the message, "failed to make the printer on your network. " Unable to connect to ' 192.168.1.10"due to an error. You want to create the printer? "When I say yes, he creates a printer icon, but says that the printer is offline. I did, but I would like to see the information tab showing the serial number, address, etc. If communication with the printer exists, but no handshake for printing.  Any help would be greatly appreciated.

  Please contact me at [email protected].  Thank you.

  Wizdad

  Just solved the problem by downloading and installing the update of the HP v.2.14 for OS X printer drivers for http://support.apple.com/kb/dl907.
  Protocol should be "HP Jetdirect - taken." Thank you all for this forum. I should have read before posting.
  Wizdad

• convertible spectrum: cannot delete the photosmart 5520

  Have used "delete device ' for HP5520 printer. At each reboot, I get the following message:

  Cseries\bin\HPstatusBL.dll rogramfiles\HP\HP Photosmart 5520

  The specific module could not be found

  How can I stop the message appearing.

  Hello
  From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
  Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.
  
  Kind regards
  Shlomi

• Cannot run the Photosmart C7180 HP printing software

  Hi, I'm new here.

  I had been using the printer, and following a system failure and corruption of a couple of files, I had to download the operating system on the HP site.  When I tried to run the software, said that a more recent version is already installed on my system.  I deleted all HP components using the Add/Remove function on my control panel.

  The software still wouldn't go, indicating the same problem with a newer version,

  I have looke in the Program Files folder and found that the HP programs were not deleted and proceeded to delete them manually.  After the reboot, I still ran the files downloaded from HP and again received the same message on a newer version already on my system.

  I guess that somewhere there is a tag that should be deleted.  I am not a computer wizz so if anyone can suggest, where should I look?

  My system is a Win XP and is up to date, running on an Intel-based system.

  Thank you.

  Gordon

  Well, good news.  I had the new program in place.  My problem was being too specific, trying to load one program for my C7180.  The solution was first to use the option to HP to check my system and to recommend and automatically download the appropriate program.

  He ended that there was a more recent software, which covered series printers Photosmart 7100 together.

  Thank you for your time David.

  Gordon

• My HP Photosmart 3310 does support ePrint?

  My HP Photosmart 3310 and the HP TouchSmart IQ546t PC support ePrint?

  Hello

  The HP ePrint feature is supported only on the new HP printers, manufactured in 2012 or later... not on older models like the Photosmart 3310

  You can follow the link below, only the support of models listed the ePrint service:

  http://support.HP.com/us-en/document/c02814760

  Kind regards

  Shlomi

• PhotoSmart 3310 instal can't find network printer

  I have a HP Photosmart 3310 that works fine on my XP computer.  When I try to install it on the Windows 7 computer, it installs the drivers, and I can add a new network printer using the IP address.  However the HP All In One install program (AIO_CDB_FSW_Full_Win_WW_130_141) will NOT find the network printer (even with the static IP address).  The HP printer and scanner utilities can find and work (HPPDU & HPSDU).  the HP diangostic untility network works and finds the printer (HPHNDU).

  The problem is that with on Setup search the Photosmart 3310 it won't allow the solution Center HP open and use the scanner.  Can I make a shortcut on the desktop to program scanner?   Where and what is?

  I also tried to plug it into a USB cable and has not received much love from the Setup program.

  The issue of 'Imcomplete Install' returns after a day or two.  Again, this is a brand new computer with a clean installation of windows and Norton, HP, and Government issued smart card software.  Nothing weird.  The other computers in the House are fine.

  I found an alternative solution that works:

  I found a solution to the issue of scanner!  I installed the software VueScan from http://www.hamrick.com/ , the software is designed for high end photo editing, so it's a no-brainer for her to scan documents.  The free version works fine. If I wanted to the cost of the professional version of the $90 is nothing compared to the time I've wasted on getting the HP software to work.

  To resolve the problem of the printer, I installed the driver through windows and bypassed the HP software.  The only thing that miss me is now the ability to fax, but which can be performed directly from the HP Photosmart camera.

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• HP photosmart c4580 program cannot find the installation 7zs7e9a file

  HP photosmart c4580 after installation at the start of problem cannot find the 7zs7e9a Setup file.

  cancellation of the attempt to install the software will run without problem.

  tried to extract files without 7zs7e9a file in the temp directory

  all solutions?

  I solved this problem. It was the error of Microsoft Installer program tried to run the corrupted original due to an MSI installation. the quickest way to fix the problem was to uninstall and reinstall the hp software.

  PS

  OS vista Home premium 64-bit

  Thank you for your quick response

  concerning

  clhxo

• -settings of the scanner Photosmart 3310

  Where the HP Photosmart 3310 stores the settings of the scanner? I am running Windows 7 and may need to reinstall my OS, but I spent a lot of time tweaking the settings that I use for scanning and hate not to be able to save them somehow so I can reinstall them without having to play the 'hit and miss' again.

  In fact, I tried to help another poster with the same problem.  They found the path itself and was kind enough to post it for everyone.  The path for you will be a little different, but it should be close.  Herethe post.

• Cannot run the installation of the software for Photosmart C4580 with 8.1 (64)

  I deleted all the software my computer HP running Windows 8.1 (64-bit) and tried to reinstall the drivers and clean software for both my Photosmart C4580 and for my Scanjet G4010, but when the installation starts after downloading, I get an error for each device dialog box "the system cannot find the file (or reader) specified. The dialog box header is "Users/Philip/AppData/Local/Temp/7zS7D57/installation/hpzpnp"... »

  I can't get past this error message no matter how, I try to download and install. The printer still prints from another laptop in the network it is connected via the network, while the scanner is connected by USB.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  8. After completing the two printers installattions rename the old file name extension to Dat and restart your PC.

  Kind regards
  Shlomi

• Photosmart C6380 - cannot delete the document removed from the print queue.

  Photosmart C6380 - cannot delete the document removed from the print queue.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler , made service right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file. Error 105

  I am trying to install a HP printer.  When I run the setup.exe and click the install, I get the message:

  Setup initialization error

  The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file.

  Error 105

  When I do a search for the error message I get no results.  So I ask the community if there is a fix or work around this issue.

  Hello

  What version of windows you are using?

  The program is not compatible with your version

  List of limitations in 64-bit Windows
  http://support.Microsoft.com/default.aspx/KB/282423#appliesTo

  To run the troubleshooting program compatibility Troubleshooter

  1. Open the troubleshooting program compatibility Troubleshooter by clicking the start , and then clicking Control Panel. In the search box, type troubleshooting tool, then clickTroubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. Follow the instructions contained in the resolution of the problems.

• Photosmart C5180 Installation ERROR - Windows 7 64-bit - system cannot find the file hpzprI40.exe

  Photosmart C5180 all-in-One

  During the installation:

  C:\Users\Test\AppData\Local\Temp\7zS1DB2\Setup\...\hpzdrI40.exe - m...

  The system cannot find the specified file.

  I clicked OK, then came next to the top:

  Error Situation code: 06768865

  The following lines were extracted from installation error logs.

  + Launching 0000000000001246128\s\Now = X:\hpzprI40.exe m

  preloadiceenginetoguidfolder-* "X:\autorun.inf" - nosplash - checkPath

  XXX-1-f "X:\hpoins18.dat" "-number validate dat"-No. validate "

  Found source file: X:\hpzsetup.exe

  VerifyFilesNoDecompression() failed with the system cannot find the specified file.

  Exit code = 2

  H E L P!  I don't know what to do now.  I tried to install the downloaded file, AIO_CDS_Net_full_Win_WW_130_140 on HP site.  My operating system is Windows 7 Ultimate 64-bit.   I need to get this working today and need complete instructions on what and how to do this fix.

  mrsjeffyg, I recommend that you completely uninstall the printer from the computer. Make sure that all copies of the printer and the associated files are removed from programs and features, the Manager of devices, and the devices and printers. If you are connected with a USB cable, make sure that the cable is removed from the printer for the duration of the present.

  Click START and type "%temp%" and press ENTER. This will open the temporary folder, and I want that you delete all the files that you can here. Some will not be able to be deleted, so ignore these files.

  Restart your computer.

  Follow this link here and reinstall it from the Full_Feature Driver and software.

  http://goo.GL/0zXiT

  I would like to know how it goes!

• Cannot find the scanner on HP Photosmart C4280

  I recently bought a MacAir with OS Lion v. 10.7.1. It prints to the Photosmart connected by USB, but cannot find the scanner. The error message is "sorry, scanner could not be initialized." (Scanner not found) ». I tried the Apple software update, which says that all of my software is up-to-date.

  Any help would be appreciated. Thank you.

  Hi SchlomiL,

  Again, thank you for your quick response, this time leading to a successful conclusion. I deleted all the software HP original, downloaded the new update and now am once more able to perform a scan.

  Your help is very appreciated.

• HP photosmart 5224. Cannot change the size of the image

  Send photos of the iPhone to the printer using photo Carpenter about no matter which presentation I use weather 1 picture or layout photo 4. The pictures come out both sides of the print only in the middle of page 1/3 of white sheet. I have printer connected to my pc and changed settings of a4 paper, but print it always even. Also can change you only the settings of paper using a pc, if Yes see not the interest of a wireless printer if I have to connect to my pc to change the settings... My pc is not wireless, this printer is my wife to use with his iPhone...

  The HP ePrint app will allow you to change the size of the paper.  Although I am familiar with the Carpenter Photo App, you can save the photo in the Filmstrip, and then install the HP ePrint app to select the photo you want and the size of paper you want.

  I'm a little confused on the printer you have.  Did you mean the Photosmart 5525?  Please specify what printer you have if my suggestion above does not help, but I hope he does.

  -Printing from an Apple Mobile device-