Cannot create file winzip iso dvd

When I create a dvd from a winzip file or iso photoshop I get the following. Windows media player cannot play the dvd because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.  Two days ago I was able to create a dvd from the iso file with no problems today, I get the notice above.  I tried to convert several iso files.  They all end up with the same opinion.  Help, please. Thank you

When I create a dvd from a winzip file or iso photoshop I get the following. Windows media player cannot play the dvd because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.  Two days ago I was able to create a dvd from the iso file with no problems today, I get the notice above.  I tried to convert several iso files.  They all end up with the same opinion.  Help, please. Thank you

========================================
First of all a question... When you create the PhotoShop files...
would it not be possible to save in a different format?

A simple solution may be to download and install the
Freeware VLC Media Player.

It should play your DVD and not only that... If you right
Click an ISO file and choose... Open with / VLC
Media Player... it should play as well.

(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)

VLC Media Player (32-bit Version)
http://www.filehippo.com/download_vlc_32/
(works on XP, Vista, 7, 8)
(the name of the file to download is: vlc - 2.0.6 - win32.exe)

(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)

VLC Media Player (64-bit Version)
http://www.filehippo.com/download_vlc_64/
(works on XP, Vista, 7, 8)
(the name of the file to download is: vlc - 2.0.6 - win64.exe)

Tags: Windows

Similar Questions

  • Can someone help me create a Bootable ISO DVD from a windows bootable USB ISO file?

    OT: Burning ISO file.

    Can someone help me create a Bootable ISO DVD from a windows bootable USB ISO file?

    I tried to burn the ISO of the DVD file in my system through Image burning software. All copied and verified by himself and said ok.

    But, when I tried to open/run the file, it displays that autorun.dll is not a valid windows image file.  Whereas the same iso file is the opening of the bootable USB key.

    Therefore, I want to copy the file to the USB.iso on DVD.

    It would be simpler just take your. ISO file and use it to burn a DVD using ImgBurn. Don't forget to check the "Hash" value of your. ISO (before creating the DVD) from time to time people do they receive a corrupted download .iso.

    J W Stuart: http://www.pagestart.com

  • "After effects WARNING: cannot create file library/preferences/Adobe/After Effects/13.2/dummy. ???

    The error message I recibed. Please help me

    After effects WARNING: cannot create file library/preferences/Adobe/After Effects/13.2/dummy

    fix the permissions problem that prevents starting applications Adobe | After the effects of interest area

  • ORA-19504: cannot create file when using rman

    Hello
    on 10g bR2 on windows machine my rman backup failed on a drive mapped with following error message:
    ORA-19504: cannot create file when using rman

    What do you suggest me?

    I heard that RMAN cannot write to the mapped file system. Is this true? Some people proposed:

    OracleService must be run by OS user with permissions

    But what oracle service? Target or RMAN catalog database database?

    Thank you.

    You must change your environment, on metalink:

    How to configure RMAN to write about readers shared on Windows NT/2000
    DOC - ID: Note: 145843.1

    Werner

  • Executable file cannot create files

    I created a VI that creates files in its operation. It downloads files via FTP and also creates a config file, if it does not already exist.

    When I ran the VI without building in an application everything has worked well. Now that I have built in an application, he cannot create any files at all for some reason any.

    The strange thing is that it doesn't throw any errors. Part of my application FTP receives a list of files in a directory through then a loop using the 'get' vi file it draws in the FTP in the Toolbox of the internet. The for loop to zip right through the list of files without having to download them, but acts like he did download them. Its supposed to wait until it downloads or expires. As I said though, nothing in the VI can create all files. I'm trying to create a configuration file, but it is not created.

    I am even dealing with the case where when I use the 'VI path.vi current"from a stand-alone application, it will send a path like c:/directory/myprogram.exe/currentvi.vi. I analyze it to the directory of the real executable without a hitch.

    I am running XP, not vista, so it's not like I need to run it as an administrator or something. I'm puzzled. I hope that I have adequately described the behavior of this problem for you guys.

    Hi Rex,

    before installing all the drivers (unnecessary):

    Have you checked all the wires of the error? Especially in the creation of your program file section? All messages of that?

    Can you show your code (a light at least version)? You can replicate the problem with an example vi?

  • "Cannot create file, no access to", trying to move the pictures to a media card.

    I want to send pictures on a memory card for a digital photo frame, but when I click on the image I get a warning saying that the computer could not move or copy the file. Cannot create the directory. How to make photos accessible?

    If you receive an error indicating that:

    "Impossible to copy the XXXX: failed to create the directory or file.

    There is a possibility that you copied too many files to
    the root directory of the memory card... This can be overcome
    by placing the image files in folders on the card.

    (FWIW... you may need to remove a photo from the map to)
    make room for the record)

  • Administrator cannot create files or run defrag.

    I am running Windows 7 and I am logged on as administrator.  I'm trying to run some DOS commands at the command prompt,

    but I am running into a problem.  For example when I run the defragmentation of the C: prompt.  I get this message.

    "The disk defrgamenter cannot start because you have insufficient privileges to perform this operation."

    Also, if I try to create a file in the C: or C:\Users directory, I get the message "access denied."

    I'm able to schedule defragmentation using the Disk Defragmenter tool in Windows 7.  Any help would be greatly appreciated.

    To run some commands, you must open the elevated command prompt:

    1 log in under an administrator account.
    2. click on the start planet.
    3. type the three letters cmd in the search box.
    4. press on Ctrl + Shift + Enter
    5. click on "run as Administrator".
    UAC will not allow you to create files in the root directory of the system drive, unless you do under the elevated privileges (not recommended).
    BACK when there is more than 10 years with Windows ME (good riddance!) fashion. The black screen is now called the Console or command prompt. Orders including defrag.exe are commands to the console.
  • FRM-10044-cannot create file ERROR:

    Hello

    When I save .fmb trust this message comes frm-10044 cannot create the file.

    -I use forms 6i & database 10g.


    -I changed also attribute of the file to read only, but all in vain.



    Thanks in advance to all.

    & Best regards.

    You should have it does exactly the opposite. The file must NOT be readonly.

  • Cannot create file bar

    Hi people,

    I created the file bar in obiee 12 c (installed in windows 7)

    I'm following the oracle (http://docs.oracle.com/middleware/1221/biee/BIESG/migrate.htm#BIESG1798) documentation and I am unable to create the folder bar and get the error (SERIOUS: failed to get the Singleton data using API oracle.bi.base.lcm directory.)

    API. Management.getSingletonDataDirectory.java.nio.file.InvalidPathException)

    .

    The following command to create file bar.

    Oracle:

    exportServiceInstance ('/ u01/Oracle/Middleware/Oracle_Home/user_projects/domains/bi ', 'ssi', ' / u01/workDir ', ' / u01/exportDir ' applicationName = None, applicationDesc is None, applicationVersion = None, includeCatalogRuntimeInfo = false, includeCredentials = None)

    Changed my coordinates

    In my local created 2 directories ('D:\workdir', 'D:\exportdir')

    exportServiceInstance (would be: \obiee12c\Middleware\Oracle_Home\user_projects\domains\bi', 'ssi', 'D:\workdir', 'D:\exportdir', applicationName is None, applicationDesc = None, applicationVersion is None, includeCatalogRuntimeInfo = false, includeCredentials = None)

    bar file creation error.JPG

    Could you please help on the above question.

    Thanks in advance,

    Vandenberghe

    Hi Mathieu,

    The settings you had (according to the guidelines of the screenshot) appears to be incorrect.

    Try below:

    exportServiceInstance ('/ D:/obiee12c/Middleware/Oracle_Home/user_projects/domains/bi ', 'ssi',' / D:/workDir ',' / D:/exportDir ' applicationName = None, applicationDesc is None, applicationVersion = None, includeCatalogRuntimeInfo = false, includeCredentials = None)

    Thank you

    Wahid

  • error cannot create an extract from dvd when trying to get a glimpse of film in dvd creation

    * - Original title - dvd creation

    When I try to get a glimpse of my film in creation of dvd, I get a message "crΘer one cannot extract dvd.

    Hello

    1. were you able to preview before using create DVD with no problems?

    2. What is the exact error message you get?

    3. this happens to all types of files?

    4 does occur for the sample videos?

    a. you can access the sample videos by clicking on start, click computer, and then click the videos section under libraries.

    b. try again with another DVD and see if you can get a preview of the content.

    I suggest you to refer to this article and check if that helps.

    Problems with creating a DVD-video using Windows DVD Maker: http://windows.microsoft.com/en-US/windows7/Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker

    I hope this helps.

  • Message error saying i ' cannot create files. Please check if you have the permission to write to the installation folder. »

    I try to get the free upgrade to windows 10 because im always active on the old windows 7, but when I hit accept I get an error saying that i ' failed to create the files. Please check if you have permission to write to the folder of installation.' does anyone know how I can fix this problem? I don't want to run on this old windows system I want a bad upgrade.

    Original title: upgrade Windows 10

    Sure that you have administrator you privileges on the computer that you are trying to level?

    Click Start, type: accounts

    Press enter, and then check your privilege account to ensure it's administrator.

    You can also try the upgrade manually:

  • SetupCopyOEMInf cannot create file/copy the .inf to System32\DriverStore\FileRepository files?

    When you try to install any device (e.g. USB key) that I don't have a driver supplied, I get the following error message:

    "Windows found driver software for your device, but has encountered an error trying to install it."

    Here is an example from windows/inf/setupapi.dev.log:

    > [Device setup (DiShowUpdateDevice) - USBSTOR\DISK & VEN_KINGSTON & PROD_DT_100_G2 & REV_PMAP\001CC0EC2F47BAB0E5F001F6 & 0]
    > Section start 02:44:23.630 04/02/2011
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    DVI: {DIF_UPDATEDRIVER_UI} 02:44:23.630
    DVI: no installer class for "Kingston DT 100 G2 USB Device"
    DVI: no CoInstallers found
    DVI: Default Installer: enter 02:44:23.645
    DVI: Default Installer: exit
    DVI: {DIF_UPDATEDRIVER_UI - exit (0xe000020e)} 02:44:23.645
    NDV: {Assistant software update driver for USBSTOR\DISK & VEN_KINGSTON & PROD_DT_100_G2 & REV_PMAP\001CC0EC2F47BAB0E5F001F6 & 0}
    INF: opened PNF: 'C:\Windows\INF\disk.inf' ([strings] )
    INF: {SetupCopyOEMInf: C:\Windows\INF\disk.inf} 02:45:05.313
    INF: location of the pilot store: C:\Windows\System32\DriverStore\FileRepository\disk.inf_f14e87fb\disk.inf
    Released INF: Inf path: C:\Windows\INF\disk.inf
    INF: opened PNF: 'C:\Windows\INF\disk.inf' ([strings] )
    INF: support OEM source location: C:\Windows\INF\
    INF: {SetupCopyOEMInf exit (0x00000000)} 02:45:05.406
    DVI: looking for the hardware ID:
    DVI: usbstor\diskkingstondt_100_g2___pmap
    DVI: usbstor\diskkingstondt_100_g2___
    DVI: usbstor\diskkingston
    DVI: usbstor\kingstondt_100_g2___p
    DVI: kingstondt_100_g2___p
    DVI: usbstor\gendisk
    DVI: gendisk
    DVI: search compatible identification:
    DVI: usbstor\disk
    DVI: usbstor\raw
    !    INF: unable to load INF: ' C:\Windows\System32\DriverStore\FileRepository\disk.inf_f14e87fb\disk.inf'(00000003)
    !    INF: error 3: the system cannot find the path specified.
    !!!  INF: failed to load INF "C:\Windows\System32\DriverStore\FileRepository\disk.inf_f14e87fb\disk.inf."
    !!!  INF: error 3: the system cannot find the path specified.
    !!!  NDV: import of driver Package failed for the new device... installing NULL driver.
    !!!  NDV: error 0xe0000203: there is no driver selected for the item or a set of device information.
    DVI: {Plug and Play Service: installation of the device for USBSTOR\DISK & VEN_KINGSTON & PROD_DT_100_G2 & REV_PMAP\001CC0EC2F47BAB0E5F001F6 & 0}
    UMP: creating the installation process: DrvInst.exe 02:45:05.453
    !    NDV: installing NULL driver!
    DVI: selected driver complete Set.
    Pol: installation of the device is subject to the policy
    DVI: {DIF_ALLOW_INSTALL} 02:45:05.500
    DVI: no installer class for "Kingston DT 100 G2 USB Device"
    DVI: no CoInstallers found
    DVI: Default Installer: enter 02:45:05.500
    DVI: Default Installer: exit
    DVI: {DIF_ALLOW_INSTALL - exit (0xe000020e)} 02:45:05.500
    DVI: {DIF_INSTALLDEVICE} 02:45:05.500
    DVI: no installer class for "Kingston DT 100 G2 USB Device"
    DVI: Default Installer: enter 02:45:05.500
    !    DVI: installing NULL driver!
    DVI: writing common driver property settings.
    DVI: {restarting devices} 02:45:05.531

    DVI: restart: USBSTOR\DISK & VEN_KINGSTON & PROD_DT_100_G2 & REV_PMAP\001CC0EC2F47BAB0E5F001F6 & 0
    DVI: full restart.
    DVI: {restarting devices exit} 02:45:05.609
    DVI: Default Installer: exit
    DVI: {DIF_INSTALLDEVICE - exit (0x00000000)} 02:45:05.609
    UMP: installation of the server process is completed with the code 0 x 00000000 02:45:05.625
    UMP: {Plug and Play Service: Device install exit (00000000)}
    NDV: {update driver software Wizard exit (e0000203)}
    <  section="" end="" 2011/02/04="">
    <  [exit="" status:="">

    -End journal-

    IF I create the folder and copy the .inf appropriate folder manually, through installation and device is correctly installed. This, however, is too demanding offer. I would like to know how to solve this problem (and maybe what caused it).

    Here's what I do in fact (using this key USB for example - any other device that I have not yet installed as for example my old digital camera newly purchased USB hub root fails in the same way and the content of setupapi.dev.log is very similar to above):

    1. [Plug device]
    2. New hardware detected
    3. Locate and install driver software (recommended)
    4. .. Search on Windows Update...
    5. "Windows found driver software for your device, but encountered an error [blaa]...". »
    6. [Vista leaves the unit with the null driver]

    To get the device works, check the log and create some Installer is looking for, repeat the steps above and the device is installed.

    I think there could be something wrong with my DriverStore; Maybe access permissions (I put plenty of administrator, system and TrustedInstaller). Is it possible to reinstall completely/System32 DriverStore?

    Thanks in advance,
    Esko

    Edit: my Vista is up-to-date with Windows Update--> nothing to update.  It is Vista 64 bit Home Premium edition

    Hi EP,.

    You can retry installing with the anti-virus disabled temporarily to see if it prevents the folder being created.

    If this does not help, you can perform a clean boot to see if a startup program is causing a conflict:

    http://support.Microsoft.com/kb/310353

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot burn files to CD/DVD more? (Windows 7)

    This problem is everywhere on the internet but I have yet to see a solution that is tailored for someone else to do a system restore that is not an option. I burned the files on my internal drive by dragging and dropping them in the folder to the blank disc, then click on burn. A few months ago I went through the process as usual (insert a blank disc, he asks what I want to do and I choose to burn cd, it opens the folder to the blank disc) but when I went to drag and drop the files in the folder to the blank disc, nothing happened. I dragged and when I released in fall, they do not appear in the burn list.

    (1) I tried to use Windows Media Player instead, and I couldn't also do drag or drop files in the burn list here.
    (2) I tried selecting the files, then click on burn instead of drag, and they still do not appear in the burn list.
    (3) I got our admin check user for burning strategies and burning has been activated. We disabled and then enabled again just in case and still no difference.
    (4) I have not download or install something new on the computer or bring other changes to this computer before what is happening and neither did my admin, there may be something that we did it. The only changes that the computer would be crossed before that happens are automatic updates of windows.
    (5) it is not the disks. It does not work with the same discs I have always used so I tried six different other, different brands, and the behavior is the same only they are all burned fine on other computers. It also does not matter if I am on CD or DVD.
    (6) it is not the drive. When my admin logged into his account on my computer, he was able to drag and drop and burn as usual it seems there is something to do with my profile specifically.
    Any suggestions?

    Hello

    Thanks for posting your question in the Microsoft Community forums.

    The computer is connected to the domain network?

    If the computer is connected to the domain network, the question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

    Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.
  • Cannot create files on a disc which I am the owner of and have all permissions to write in. (Error 0 x 80070522)

    I have two hard drives in my computer.  When I try to create or copy files to the root of my drive D:\, I get an error message (see image below).  I have possession of the car, as well as all the permissions.  In addition, there is no set of permissions of 'decline' (see image below).  How to solve this problem?

    Error message and permissions:
    http://img51.imageshack.us/img51/3484/permissions.PNG

    Hi tehshibz,

    Please use the Microsoft Windows 7 forum.

    Belongs to your computer from a domain?

    This is by design and is a function of (UAC) user account control and the
    ACL on the root of the drive. The ACL allows that the administrators and system
    for writing files to the root of the drive. UAC means that even if you are a
    Member of the group from the administrator, you are not running as an administrator, unless
    raise you.

    If you really want, you can launch a process allows you to write the
    files with as an administrator, then you can write. If you try to
    Drag / move a file, you get a prompt for elevation. It is recommended that
    solution is do not store data however.

    If you really want to store files in the root of the d: and you do not want
    raise every time, you can resolve the situation by adding an access control

    list entered for your account to the root of the drive, as follows:

    1. click on the window button: all programs: Accessories
    2. right click on command prompt
    3. Select run as administrator and accept the prompt
    (4. run this command: icacls d:\/Grant fooSadOI) (CI) (M)

    That grant foo user alter permissions on d:\. All objects (IO) and
    containers (CI) will inherit these permissions. You replace foo
    with the name of your user account.

    Once do you any application you run as user foo will be able to store
    data at the root of the C: drive. You will also have losened default
    security settings, with all the caveats that implies.

    Your user profile may be damaged and therefore you can remedy.

    Follow the steps in the link for the Fix damaged user profile : http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile

    For more information, see: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/08ef075c-3cea-4397-9d7a-622eed7faa35
    http://social.technet.Microsoft.com/forums/en/itprovistaannouncements/thread/b5e69635-038b-4A80-8786-70e1b1d8be0a

    hope this helps
    Aziz Nadeem - Microsoft Support

  • Cannot export files on a DVD/CD with Lightroom 6.6

    I have a problem that I can not export any of my photos from Adobe Lightroom 6.6 for my CDE/DVD Burner.  LR goes through the motions of asking me what burner and what speed to burn and then prepares to burn that try to run the disc and then immediately to 20 percent complete but there is no activity of my writer what so ever.  I know the burner works cause I also have a separate burner program that I use regularly for other tasks.  I tried to export the files in a separate Directory on my HDD and LR has no questions and runs the task perfectly.  I also uninstalled my software writer thought there was a conflict restarted my machine and LR has always the same question, exporting to the DVD/CD burner.  Current running Windows 7 64-bit, 16 GB of ram.  Any help would be appreciated.

    I deleted the driver CD/DVD rebooted the computer Win 7 installed automatically the pilot again tried to export the files I tried to do for several days and it works perfectly.  I'm assuming that there was a file corruption problem that has been fixed with reinstalling the driver.

Maybe you are looking for