Cannot create the routing protocol ospf

Similar Questions

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

  Hello.

  I have Toshiba Satellite C55 - A (PSCGAE).

  Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

  Version 1.2.41.0 of his Studio of DTS (32/64 bit).

  When I try to open this application I have error: cannot create the instance APO.

  What should I do?

  You need to update the audio driver (I guess that your device uses IDT HD audio card)
  But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

  DTS Studio seems to be already aware...

  So I advise you to go to the Device Manager and uninstall its drivers Associates
  After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

• Satellite T110-11U - cannot find the router WLAN

  Hello

  I have a Toshiba Satellite T110-11U. Have had since February and loved it-fortunately it wireless used throughout the House. Then one day on a month, unless I was in the same room that the wireless router, Wireless does not work. I have 2 other laptops (and iPhone) which still connect wirelessly throughout the House and the garden without problem.
  As you can imagine, it was very strange. When I take in the garden, my other laptops are all networks wireless in the region, but my Toshiba can't find any.

  Suspecting it was a driver problem, I made sure that the wireless drivers are up-to-date. With no joy, I got the system as it was at the time of purchase (do a complete restoration by interupting, starting and leaving the hard drive to be deleted and reinstalled etc.). Still the same problem. I even changed the rooms in which the router is, and the same problem - the Toshiba cannot find the router unless the router is located a few meters from the laptop.

  Until I lose the will to live, can anyone suggest the cause of my problems, or is it time I admitted defeat and brought back to the Comet under warranty (where likely test next to a wireless router and tell me everything is fine!).

  Thank you very much

  Steve.

  Hey Buddy,

  Did you check if the wireless network card is recognized correctly in the Device Manager? There may be a yellow exclamation or unknown device. Try also updating the driver WLAN from Toshiba Web site:
  http://APS2.toshiba-tro.de/WLAN/

  See all other WLAN routers?
  The wireless network card can be activated using a combination of keys FN + F8 and in the BIOS. In the BIOS, you should also load default settings and test again.

• says device cannot create the folder

  have been on a cruise and tried to use their computer to download some photos but wouldn't work - now my camera says * cannot create the folder *-my computer can't see also photos even though my computer says there is only 3 GB of space left on a 16 GB of my camera card is an EOS 60 d - my card a San disk Ultra 30 Mb 10 16 GB

  It seems that the SD card is damaged. But it might be possible to recover the files. There are a lot of tips online on how to do it. You could start here... http://www.PCAdvisor.co.UK/how-to/storage/3481659/how-get-files-off-corrupt-SD-card/

  Good luck, I know how much vacation photos can mean.

• Cannot create the folder on the storage device

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  =====================================
  The dialog box you received usually indicates that there
  are too many files copied to the root directory of the
  flash drive.

  The solution is to remove one or more pictures and
  create new empty folders in their place... then move
  all the photos in the files... problem solved.

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Error message: cannot create the folder C:\Documents and Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt Settings\

  I recently had a problem with the virus 'Restore Windows'. I was able to get rid of it with Malwarebytes antivirus scanner, but when I turn on my computer I get this error message.
  Cannot create the folder C:\Documents and Settings\ of Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt
  
  
  I'm no expert, but I feel that my C drive disappeared, or at least has been hidden. My documents, pictures and music files are all empty. My programs (start > all programs) have been removed and deleted the shortcuts on the desktop. When I go to my computer, my personal and shared document files are not accessible. Under the description it says that they are hidden. My local disk (c) is also empty, but there is still very little space which suggests that programs and files have not been deleted.
  Is it possible to recover my files?
  Thank you

  Hello

  MoHlog.txt file is related to the software of modem on the computer, you can uninstall and reinsta it check if it works.

  Also scan your computer for any infection by virus still present on the computer using any scanner online.

  You can also try the system restore to the point before that the computer has been infected by the virus and check if it helps.

  Good luck!

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot create the C:\WINDOWS\system32\drivers\drive.sys file

  Cannot create the file 'C:\WINDOWS\system32\drivers\drive.sys '. The process cannot access the file because it is being used by another process.

  I get this error message all the time on my desk. No matter what I do, internet research, watch videos, listen to music, work offline, it does not apply to just be online. I really want to know how to solve this problem, I searched everywhere I could, and I can't find again no anwer. Please reply and if you want more information, then I'll be happy to provide.
  Thanks for your time.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Cannot create the Image of the system or system, unknown error repair disc: 0x80004005.

  Original title: cannot create the Image of the system or system repair disc

  I just bought a new Windows 7 computer. I tried to create a system repair disc, but still receive the error msg - error (0x80004005) unspecified. I tried - and lost - several DVDs in the process. Also, not able to create a System Image disc. The computer says that I have to format the drive and when I click OK, it goes through the movement, then gives me an error msg that the Format has failed. (In addition, it does me not the possibility not to format the drive.)  Very frustrating...

  Hi iamkira,

  This problem can be caused by a conflict with other programs installed on your computer, usually antivirus software. Follow the steps described in this document to create the drive in a clean boot state.

  Let us know if that helps.

• Error in retrieving the metadata of HFM. Cannot create the file

  In our HFM 11.1.2.3.503, we get an error when we try to extract metadata from any application of HFM. The States of error message failed to create the file.

  We are on hfm.501 but I tried with connecting to 503 to see if it solved the problem, but there was no solution in sight.

  Error code:

  {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}

  Summary of Message System

  Cannot create the file.

  Details of the Message System

  Error reference number: {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}; User name: BI-DEMOS5$
  NUM: 0 x 80040230; Type: 1; DTime: 16/12/2015-21:27:04; SVR: BI-DEMOS5; File:; Line: 0; Worm:;

  There is no indication where he tries to put all the files so that I could try to find out if there is a setting somewhere pointing to a folder that does not exist or similar.

  Try the revision of the following document:

  • Hyperion Financial Management (HFM) error "unexpected error: 80040230 has occurred" trying to to Scan, load or extract meta-data (Doc ID 1282089.1)

• DBCA cannot create the database in 12 c in Windows

  Hello

  After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question

  It throws an error message of "Recovery Manager could not restore the data files"

  I looked at the log files, here is some information:

  Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4

  Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data

  Not sure if this helps, but I am attaching several log files to help debug the problem.

  I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.

  Any help is appreciated.

  Thank you

  Pranav

  Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Im very new to Oracle DRM and Im trying to get the configuration of the application on the Windows Server that is running SQL Server 2008.  When I try to connect to the Web Client I get this error.

  DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Can you please help

  The problem is solved, reinstalled DRM and recreated the repository. the password has a symbol that causes the problem, @.