Cannot delete backup of drive C through Classics (or all) methods.
During a recent backup on an external hard drive, Windows backup made 2 backups at the same time, apparently - one for my outside and the other (for reasons unknown) on my C drive. It took almost all of my C drive and now save (manage the backups/space) will not change in the C drive, because there is not enough available space. And I can't delete the backup of the file Explorer, either. Any suggestions?
Windows 7 pro 64-bit.
16 GB of ram
Core i7 processor
2 hard drives of 1 TB
Hi AG. I'm just getting back to this.
Before proceeding, I would like to assure you of something. The big issue I talk on my C drive, which appeared when I saved on an external one that is named "System Volume Information".
I supported once again today and there is a file on my external drive called the same thing, AND the file with this name on my C drive now has the current date. Thus, a duplicate must have been done again, or the folder has been updated, or something.
So, I really don't think that delete this folder in my C drive will make a good long term, except for release temporarily a lot of valuable space. But I learned to understand why windows backup does.
(After) I'm saying this out, can you tell me what you do for backups? I'm guessing that you have found a much better method.
Once again, thank you for your help!
Delete "System Volume Information" and similar such as "recovery" should * not * be removed, removal will result in corrupted file system!
If you have multiple user accounts you must empty the Recycle Bin for each user through normal means, and not by the appropriation of any kind. (it is the newspaper account and empty basket and run Disk Cleanup, as explained below)
do the same for each partition and hard disk (plug in external HARD disk while disabling the Recycle Bin)
The best method to backup your personal data is to use at least 1 external HARD drive or USB key.
Online storage is also good but only for non-confidential data.
Do not encrypt your external storage, sooner or later you're going to block your stuff and there is no way to go in this case.
Backup system is good for the system recovery (backup of the system files * only * ) and they do not take too much space.
You can reduce or configure this space in:
Configuration\systeme control and Security\System
Advanced system settings
The system protection tab
Configure button
And
System Restore button
Once you set up above do a cleaning disc for each user account.
Control of configuration\systeme and Security\Administrative tools > disk cleanup
I lost a lot of data during the backup on laptops (portable computers die or get stolen sooner or later)
I lost data while trying to encrypt the stuff (you lose your decryption key sooner or later)
I lost data using a single external storage (hard drives die to the wire or getting hit by corrosion)
I lost data while performing backups on CD/DVD (CD/DVD backup s * uks)
Keep confidential things on HDD/USB EXTERNAL, stuff on the external storage cannot be 'hacked' as another pluged in storage devices.
don't use programs of any kind to transfer data to external storage, use the copy and paste * manually *.
So currently, I use 1 drive external HARD, key 2 USB and 1 card SD + online storage.
No more problem.
Hope that helps :)
Tags: Windows
Similar Questions
-
Hello
iCloud storage said I'm using 3.71 GB as "Backup" (yellow bar), but I did not all backups (see the screenshot). I have disabled all backups, delete photos, basically everything but it is always showing 3.71 GB is used and I have no way of knowing what is 'saved' or how to remove anything.
How can I remove this "backup data" and recover the storage space?
Thank you, Mark
Have you tried allowing the back upward so that the delete option appears.
-
Cannot delete the printer driver
Hello
I tried all the options in this thread... .no joy.
I am running Windows 7 and I want remove driver for my printer.
System say it is to use and cannot be deleted.
I am the only user on this computer.
Help, please.
Hello
Thanks for posting your question in the Microsoft Community.
You seem to have a problem with the removal of your computer printer driver. Check out these links, many users have confirmed that they were able to solve the problem by returning the suggestions mentioned in the following links:
I want to remove/erase/print driver to Windows 7 and can't find any documentation.
Cannot remove a printer
Hope that this helps, please let us know if you need further assistance.
-
1.9 GB to 5 GB of my iCloud space is taken up with "backups". I followed the procedures of various threads to try to delete all backups successfully. I'll give you two examples that follow, and would be grateful if someone can give me a lead. I disabled everything that I can think of that could be written to iCloud backups.
On iMac in Preferences > iCloud, the bar at the bottom of the screen says I have 5 GB of storage iCloud and almost all the storage I use is yellow color coded and said "Backup." When I click on the button "Manage" it shws on the left I have "backups 1.9 GB" and "Mail 5.1 MB. Aside from that there is nothing else under Storage manage. When I click on the "Backup" item on the left, on the right panel shows NOTHING. There is no backup to select and delete. Remove the button is grayed out.
On the iPhone > settings > iCloud > storage, it is said:
5.0 GB total storage
3 1 GB available
and when I click on the option "Manage storage" (iPhone > settings > iCloud > storage > Storage manage), it mentions that a single element which is Mail 5.1 MB. There is nothing else that are listed.
Backup is disabled on my iPhone and iPad (settings > iCloud > Backup). On the desktop, I see not the backup to delete, as explained above.
I disabled player icloud, photo stream, etc.
Any ideas how I can clear this off backup my iCloud account?
Contact Apple iCloud support.
-
Cannot delete files on Hdr-As100v through TDC
Hi, just got my new cam action. plugged into my mac, opened the House of playmemory, but could not remove all the files on the camera. I tried right-clicking on the file, the Remove option and the option rename is gray, don't click.
can someone please?
With PlayMemories Mobile or PlayMemories host files on the Sony Cam can be deleted. All drives (partitions) are mounted read-only when Sony Cam is connected to your PC.
However, you can remove the SD of the cam and mount/connect card with an SD adapter directly and delete individual files, and also update the AGPS data in even - as this can also be changed only when it is mounted without the cam.
Sony recommends formatting the SD card after you import your videos and photos with PlayMemories House to clean any excess files such as metadata or exif of previous videos and photos allowing you to maximize the storage capacity of the SD card. [1]
Formatting your SD card on your PC allows the format to exFAT - where to format the SD card on your Sony Cam perform only in format FAT32.
After each format SD card, transfer of information AGPS on the SD card. What Sony Cam connected to the PC directly on the SD card is read-only. Follow the steps below:
- Remove the cam Sony SD card
- Connect the SD card directly to your PC
- Launch PlayMemories Home on Windows or Mac OS X
- Select Tools > tools for Support of GPS
- Select the drive letter that corresponds to your Sony Action Cam and press the update now.
-
Rescue and recovery cannot delete backups
Hello
I have problem delete old backups with Rescue and Recovery - always when I try to delete them, it seems to work, but it is not, it never ends... I tried to remove one of all backups, only the last or only the oldest or all of them together, but without effect. I have 6 backups about 45 GB together. And by the way that r & R does not well at all - also when I click on optimize backup storage space, it does not work...
Eventually, it is normal that when deleting old backups, computer seems cold and it takes a long time, but I don't know if it never ends.
I have the latest version of Windows XP Pro SP3, R & R 4.21.0016 R61.
Is there a solution?
Thank you very much!
V.K.
Uninstall rescue and recovery of add/remove programs. It will remove the backups in this way.
-
Title says it all. I get errors saying C: / then file is inaccessible. I don't have the necessary administrator permissions, if I click on anything with the security shield, it does nothing. Help, please.
[Transferred from Internet Explorer]
Title says it all. I get errors saying C: / then file is inaccessible. I don't have the necessary administrator permissions, if I click on anything with the security shield, it does nothing. Help, please.
[Transferred from Internet Explorer]
Version of Windows is different, but the problem is the same... Follow the troubleshooting steps in the links below and update the thread if you can fix it
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/unintentionally-removed-ReadWrite-permission-on-c/ffcc1dde-e68d-40db-A00C-6e82d1133e93
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/c-is-not-accessible-access-is-denied/b8a0fa0f-DC68-4455-928c-97a225215071
-
First of all, I have a genuine copy of vista, I bought my new laptop Lewis john and it is validated as authentic by microsoft validation site.
I installed vista service pack 2 beta kb94865 version.286, I am aware that I have to uninstall it and install the latest version of service pack 2, but I tried all the methods that are described in http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/23b20653-ddd7-47b1-8fd7-be9563c247b0 and on the microsoft article that it is, uninstall fails to any method I try, the reason is that I have nothing in my c:\temp folder I have no restore points, it is massively frustrating obviously, I contacted the technical support from microsoft (with a "guarantee", they would get back in 24 hours and no response.
What should I do?
Thank you
How to uninstall Windows Vista service packs...
http://support.Microsoft.com/kb/948537Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010, Support MS is fairly flooded by those who have not yet installed SP1 (support which ends April 13, 2010). Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).
Your fastest resolution can be a clean install of Vista.
-
cannot delete emails in outlook express
Original title: outlook express
cannot delete emails from the Inbox
1. move all the messages you want to keep out folders, sent items and deleted items, and in other local OE folders you have created for archiving (backup) of such messages.
1B. move 99% of your messages in your Inbox folder to other folders the of OE, too.
2. Note the location of the store of your identity (http://www.insideoe.com/files/store.htm#storemain).
2B. turn on "Show hidden folders and files" via start | Control Panel | Folder options | View (seehttp://www.bleepingcomputer.com/tutorials/tutorial62.html).
3. close OE.
4. in Windows Explorer, navigate to your storage folder, find & removeOutbox.dbx, Sent Items.dbxand Deleted Items.dbxfile.
To avoid such problems in the future, comply with the following restrictions:
N ' not use Inbox or sent items to archive messages. Move them to local folders created for this purpose.
-Empty the deleted items folder daily.
-Frequently perform a manual compact of all OE while records that "work offline". More onhttp://www.insideoe.com/files/maintain.htm
-Do not cancel automatic compacting, where it would happen and do not try to close OE via Manager tasks or stop your Automatic compaction machine can take place.
-Disable e-mail scanning in your antivirus application. It can cause corruption (i.e., loss of messages) and offers no additional protection:
Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot delete the folder where the backup is saved.
I have recently reinstalled Windows.
I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.
now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.
I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".
Can you help me? This file is large and takes place on my hard drive.
Hello
1. what happens when you try to delete the folder?
2. do you get any error code or error message?
I suggest to try to delete the file in safe mode and check if it helps
Start in Safe Mode:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeAlso try the steps in the following Microsoft article and check if this may help.
Why can't I delete a file or folder? :
http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
Hope the information is useful.
-
Cannot delete the Time Machine backups
I have a MacBook Air and a 128 GB USB key that holds my library of photos, so I always make backups. My system - and I have recently made account how flawed it was - was to create backups on a 500 GB HARD drive, but to transfer them to a 2 TB HARD drive when it is full. So, I finally discovered that when I transfer backups in small quantities to the 2 TB, it takes more space because instead of aliases of files used to represent more recent backups, care of file just copied over and over again. For this reason, I put my 2 TB as a feature of time machine and imported all the old backups in the folder backups.db, that my Mac 'cleaned' and registered 135 GB. But 135 GB is not enough, I went and delete backups that I don't have anymore. When I looked in the trash to empty, I've seen 2 things: backups I have trashed and others who are pale sort out. I can't open the files, even if I right click and select "open in a new tab. When I try to "immediately remove" these paled-out files, I always get a message that they are "on duty." It is about 300 GB, so I must get rid of him. But it does not stop there, because when I try to "delete immediately" backups I had trashed myself, I get an error message! It is a total of about 600 GB, what I absolutely need to get rid of! If anyone has some tips, it will be greatly appeciated.
You have probably sprayed your Time Machine backup database. The best thing to do is erase the disc with Airport utility. Then start again with a new backup.
Good day.
-
Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right
Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r
s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity. -
Ghost files - cannot delete Trash: error 50
Hello
I have trouble to delete some files from Ghost that appeared in my garbage can:
By emptying the Recycle Bin, 50 pops up an error: "the operation cannot be completed because an unexpected error occurred (error code - 50)."
I looked at lots of different topics already, nothing works. I place them in a folder and because of the different actions on the file (because the files always come with an error (cannot rename (focus error), too long to be moved, etc. file name)):
I have so far:
- Tried to delete the files with
- iTrash
- DaisyDisk
- Repaired "Macintosh HD" with my account disk utility.
- Fixed "Macintosh HD" using disk utility from the recovery partition (Cmd - R to start)
- Check the file permissions in the file properties
- Because disk utility is not the "Fix permissions" button (in El Capitan), I fixed the permissions with DiskWarrior.
- Tried to move the file to a disk and then format the drive, but OS X Copy the folder instead of moving.
- By using all the methods of the command prompt, I found on other messages of the forum (I don't want to navigate through my history to list them).
Yet the 50 error is still popping! Currently the thought of another workaround solution...
I know that the following would allow to settle, but I'd rather not have to do:
- Reinstall from backup Time Machine prior
- Create a new account and delete my old account.
Someone at - it a technique to solve this problem?
Thank you
James
OK, I found a nice workaround with iCloud drive and an iOS device.
Here's what I did:
- Move the folder containing Ghost files to my iCloud Drive in the Finder and wait 30 seconds to display in the player to iCloud on my iOS device application 9.
- Remove my iCloud drive to iCloud preferences window in Mac system preferences
- Delete the iCloud drive folder using the iOS app
- Reconnect to iCloud Drive on my Mac.
Good riddance!
- Tried to delete the files with
-
Cannot delete files from 0 KB Word 2003 "cannot read the source file or disk.
Original title: how remove the files from Word 2003 0 Kb which can not be read - file cleaner empty and an empty folder solvent do not work - "cannot read the source file or disc!
I have a number of Word 2003 files that I'm unable to delete, since the message "Source file can not be read"appears when I try to delete.
I have tried vacuum cleaner and Remover empty folder, also delete - file but cannot delete what cannot be recognized. Can anyone help please? Must be an easy way to do what I forgot, because I can't send files that contain some of these bulk files in my backup hard drive, the process stops when it reaches the 0 kb file!Hello
1. where are the files located?
2. are you able to open this file?This can happen if the file is used by some programs / demand or is corrupt.
Follow these steps:
Method 1: Check if you are able to delete the files in safe mode.
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=trueMethod 2: Ownership of files and check if you are able to delete.
http://support.Microsoft.com/kb/308421 -
Failed to backup my drive (C :) for DVD + r
Whenever I try to backup my drive HP (c) on DVD + R (16 x 4.7 GB) I get the following window; "Back to the top has not completed [by reason] a device i/o error. (0x8007045D).
My system features:
(64-bit) of Windows Vista Home Premium, HP
What I tried:
I tried to go to the protection of the system/system settings and unchecking the HP drive (C :), click on APPLY and then again controlled drive (C :).) NO LUCK
Please let me know if you need any additional information. thanx
Hello
The CD/DVD drive does work otherwise? You can read and burn discs? CD and
DVD?=============================================================
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Maybe you are looking for
-
Can not read the CD on Windows Media Player
Can not read the CD on W Media Player, recorded on the normal cd/dvd TV player
-
is Security tab..tht thngs that may access are changed for refusal... so please now tell me how to access all the operations of tht... bz if I open c or d drive... it shows access is denied... and it shows in his propertis... u must b an administrati
-
I'm not finding where I can print info on Officejet pro 8600 legal-size paper. I tried settings. Anyone? Can I put paper of legal size in the printer? Thank you.
-
HotSync always stops to go AFTER dbfixit a repair on Palm TX 6.2.2 Windows 7
I tried to sync with bluetooth and finally managed to do it sometimes, but now he hung up once AGAIN on the Agenda when I try to sync it. I bought bdfixit and he has set the agenda, but now it seems to be damaged again and will not sync! What is the
-
Common interface of JS does not work for me when I check the generated swf file
Hi allGet up to speed on the use of Javascript and 8 Captivate. I work with what adobe own examples discussed here: JS Common interface .I downloaded the project, published under the title of HTML5 and SWF and posted on our server.HTML 5 versionOpen