Cannot delete the corrupted/unreadable file in mode without failure or BACK

Similar Questions

• Cannot find the corrupt configuration file to be recovered.

  I had a similar problem to many people, with my computer telling me that the windows\system32\config\system file is corrupted missing. But after trying the steps on the support page, I got no further than the first step that the files that I need to copy could not be found. I tried to jump to their compensation, but, yet again, as they cannot be found, they cannot be repaired! Don't know what else to try as no command doesn't seem to work with anything whatever in the config folder. Then, try the system restore, but don't even know if it's likely to work?

  Any help would be greatly appreciated!

  The problem is usually a corrupted file system and not a damaged or missing file.  The message means that XP tries to start, but just can't find or get the file.  A chkdsk /r usually clears it right up, but when the mistake of Googling, KB307545 is the first results, so unfortunately, it's where people start sometimes.  KB307545 is a corrupted registry or a file system afflicted.  If the file system is corrupted, you will get frustrated quickly with KB307545.

  KB307545 doesn't really work if you follow the directions exactly and you do not have a problem of file system, but I've never, never, never used to solve the problem you describe because it is usually never really necessary.  Recording file corruption does not usually go to the origin of the error.

  If you want to use KB307545, which is something you would do to get your whole system running long enough to make a 'real' system restore, but only after running a chkdsk/r from the Recovery Console.  There is no such thing as a "restoration of the manual system.  There is a "get my system functional enough to do a regular system restore".  KB307545 and a regular system restore are not interchangeable.  It could also be that your system restore is just totally whacked on too much by train.

  What happens when you try to start your system in Mode safe?  What is the last thing you see on the screen?

  What does ' not loading everything '?

  If you use the Recovery Console to implement the KB307545 and have already tried, name changes will not work until you remove the files target of your previous efforts.

  If you want to rename fileA to fileB, you must first remove the current file (if it exists).  Change of name is not identical to the copy so if the target file already exists, you cannot rename just another file on top of it.  You will get an error message.  You will need to delete the old file first, and then rename.  That is why your worked the first time but not the second time - the file you are trying to rename already exists.  You cannot rename on top of an existing file.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Error code 0 x 80070052 cannot delete the folder or files

  Error code 0 x 80070052 has give me a lot of problems. Now I'm unable to delete files and folders.  I am running window 7.

  Hey Kay59,
  To start here is a patch to fix the folder settings and rights:
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/
  Then, I pulled a thread I think that will contain some great resource. You must take the time to read through and try the steps indicated by the Mark.Look through this thread and try some of these steps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/error-0x80070052-the-directory-or-file-cannot-be/89b2981b-B707-4C1E-9227-89ad139efe9e
  If you have any questions, return to this topic and explain what were your results. Be sure to include all the details that you can when you describe your results.
  Thanks for posting of Microsoft Answers! Good luck with the troubleshooting.

• Cannot delete the program data files

  I need to remove some log files for a program that I was running.  The files are in the program data, but when I try to delete the logs I get the following message:

  File access denied

  You need permission to perform this action

  Your must be authorized by administrators to make changes to this file

  (Name of the folder( )

  (Date of creation)

  Question is, how do I get permission.  It's my personal computer at home and I really need to delete these log files.  Thank you.

  See if that helps.
   
  How to take possession of an item in Vista. Works also under Windows 7
  http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

   

• Cannot access Windows XP stuck in reboot Mode without failure and encrypted HD loop.

  I am currently stuck in Safe Mode reboot loop. This happened after I opted to enter Safe Mode via MSconfig (box checked/SafeBoot in BOOT. INI tab). I am unable to secure through all normal boot, command, etc.

  I have already installed Recovery Console but I try to use it, I get the error "UNMPOUNTABLE_BOOT_VOLUME" on blue screen.

  I don't have a Windows XP CD, so last night I started with Knoppix successfully but can not access the Boot.ini file. I think it's because the encryption (Encryption Plus Hard Disk of GuardianEdge) provided with the laptop software. Before this has is spent, during the boot process, I get the login screen of encryption before Windows XP starts. Without this step, I can't access all the files.

  My question is this: is it possible to achieve connection encryption while that started using Knoppix?

  I'm completely locked out of my laptop. I appreciate any help you can offer.

  Thank you

  N

  You should look at this thread: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/384b006b-f2a5-4495-94da-981a8ad0b003

  QQ learn manage!

• In Windows 7, cannot delete the file "cannot complete this action because a file or a folder it contains is open in another program" How do I know which file or folder?

  It comes to windoows 7 that I am trying to remove a user and windows says it can't because a file or folder is open in another program but what island or folder?

  * original title - cannot remove the file the action cannot be completed because a file or folder it is open in another program. What file or folder? How will I know which file or folder? *

  Hello

  Try the steps mentioned below and see if it helps:

  Step 1:

  You can view all programs currently running on your computer in the Task Manager.

  Check if there is any process related to the file running is running. If you find any, do a right-click on the process and end it.

  Access the link for more information about the error you get below:

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-delete-a-file-or-folder

  Step 2:

  You can also try to remove the file getting mode without failure.

  Access the link below to learn more about Safe Mode:

  Start your computer in Mode safe:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

• Cannot remove the Canon CR2 file (xp)

  I'm not "allowed" to delete files Canon Camera Raw (CR2) on my computer, even though I am the only user and I am officially the 'administrator', always, somehow I have not sufficient permissions!

  I have windows xp, files are downloaded through the utility supplied with my 5 d Canon.  They are saved in a folder on an external hard drive, which is now complete.  These files are HUGE, and I have many, many concerts to empty.

  The official error from the Explorer, tells me that I can't delete because the file is 'used by another person or program ".  Not true.  I'm the only one here.

  I restart, open the Explorer ONLY and still cannot delete.

  I also tried to remove thanks to Adobe Bridge, this error message says that I don't have "sufficient" to remove.

  I checked the properties of folders, they are not locked or read-only.

  (Not only can I not delete it, but I can't move or change the name of the file.)
  Any suggestions are greatly appreciated!
  Leslie

  Might be interesting to try to delete the files of Mode without failure.

  Or... the following freeware may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Unlocker
  http://www.filehippo.com/download_unlocker/

• Cannot delete the folder/files off computer/Explorer

  Hello

  having a problem with a program. (ITunes). Tried to fix without success, so I removed the program (actually had to remove a lot of different things as suggested by ITunes) after removing everything (in order) from my control panel. (Add/Remove Programs) I was told to go in Solution Explorer and manually delete all the folders/files always on comp...

  Here's the problem; Some of the folders I have to delete tell me I don't have permission to do so! I am the administrator, but still it tells me I can't do this! I tried to change the security settings, but cannot be done. I don't have ownership of these records.

  Everything I need to delete are c; Prgram Files. I manually entered any program that I could not access some years and changes to the security setting, but I noticed that all the program files security settings could NOT be changed.

  HOW to remove these files? I'm sure that if I leave when I re - install ITunes I'm having problems... Please help as Ive tried everything I can think of!

  Hello

  having a problem with a program. (ITunes). Tried to fix without success, so I removed the program (actually had to remove a lot of different things as suggested by ITunes) after removing everything (in order) from my control panel. (Add/Remove Programs) I was told to go in Solution Explorer and manually delete all the folders/files always on comp...

  Here's the problem; Some of the folders I have to delete tell me I don't have permission to do so! I am the administrator, but still it tells me I can't do this! I tried to change the security settings, but cannot be done. I don't have ownership of these records.

  Everything I need to delete are c; Prgram Files. I manually entered any program that I could not access some years and changes to the security setting, but I noticed that all the program files security settings could NOT be changed.

  HOW to remove these files? I'm sure that if I leave when I re - install ITunes I'm having problems... Please help as Ive tried everything I can think of!

  ===============================================
  Sometimes, you can rename a file, then delete it.

  Sometimes, you can move a file and then delete it. at the office, for example.

  Sometimes, you can remove a file after you restart your computer.

  Sometimes, a file otherwise undeletable may be deleted in Mode without failure.

  And... the following freeware can usually remove anything:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Unlocker
  http://www.filehippo.com/download_unlocker/

  Good luck...

• Cannot delete the file. 'trial' "impossible to find this element". It is neither located in C:\Users\master\desktop.

  I have a folder called test on my desk that I created to try the xcopy commands.  Anyone who has nothing to do with it.  I think that when I created the folder I could add a space somewhere in the file name.  He is currently empty that I deleted a word of her documents.

  However I can't remove it.   It says cannot delete the file. "Cannot find this item. It is neither located in C:\Users\master\desktop.  Have already tried to delete the file in safe mode but not no luck.  Also if I navigate to the path C:\Users\master\desktop folder is not there and I hid the displayed files.  If I right click a properties to create the size is 0bytes and created a modification dates are suppressed.  How can I delete the file?

  
  

  '\\?\%userprofile%\desktop\trial*' of RD/s
  '\\?\%Public%\desktop\trial*' of RD/s
   
  Note the * appended to the name.
  --
  ..
  --
  "J.Summers" wrote in message news: a8ec7720-22a6-465f-bbbe-a27df3ace7a2...
  > Ok, I tried both commands and came to the same thing.
  >
  > Other ideas please?
  >
   

• cannot delete the folder I am one user have access to all the files and folders can remove any but one could take ownership of disk backup file

  Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right

  Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity.

• Cannot delete the file. Says "not not found could not find this item check the location of this object and try again."

  Cannot delete the file.  Says "not not found could not find this item check the location of this object and try again."

  I got this file from my friend got sent - is a word document, I had on their computer.  So I tried to use Disk Cleanup to delete temporary files, temporary internet files and files program downloaded.  Does not work.

  When I check the properties, there is no security tab so I can't transfer ownership in this way.

  I don't want to experiment using the way of the transfer of ownership command prompt as the name of the file is several sentences long.  I can't rename it either, of course.

  Windows 7, a week and I already have a stupid problem which has already lost an hour of my time.

  What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away.  Once registered.  I click with the right button on the new file and rename the exact name as the file problem.  Don't forget to change the file extension (ex: .doc)

  ex file problem: word.doc

  new file: word.doc

  as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.

• Extractdion failed, cannot delete the output file

  I have Windows Pro 8, 64-bit, 8G of RAM.

  When you try to install the drivers of HP, I get the following error.  Extraction failed, cannot delete the output file.  I get the same error using the download I used to use with Win 7 and a new download from the HP Web site.  I have also tried to run the program as an adminitratior and get the same error message.

  I managed to do the work.  I found on my C drive the location of the files when extracted and run the installation program from there.

• CANNOT OPEN OUTPUT FILE, CANNOT DELETE THE OUTPUT FILE

  Try to patch effect for Deskjet 722C for Windows 7.  Not able to replace the existing .dll files.  Error messages: could not open the output file, cannot delete the output file.

  Thank you for your response.  I found these solutions but still had problems.

  However, I was able to bypass Windows with a DOS command that did the trick.

  C:\Windows\System32>copy C:\temp\hpvdb720.dll C:\windows\system32\spool\drivers\x64\3

• Search engines not available, except in mode "Run as Administrator". delete the parent.lock file profiles did not help

  After the upgrade to 21 FF, search engines no longer appear in the bar at the top right of the screen, so no searches are possible. I can navigate to my favorites and apparently also to the links contained in the e-mails.

  If I right click on the FF icon and choose the "Run as Administrator" option, the search engines are there again. I tried to delete the parent.lock in the profiles folder, that this solution was solved a problem I've had recently with the previous version of FF (not being not able to open FF and getting the error message on another version of it running, which had to be closed in the first place - but there was no other version running.) In this case, too, before I discovered the solution, I could open FF using the option "Run as Administrator"). However deleting the parent.lock file does not resolve this issue.

  I would be grateful for your help, especially if a person not very computer like me can understand put in simple terms!

  You have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder?

  Try to remove the file search.json and a possible search.sqlite in the Firefox profile folder to reset the default search engines.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file

  Firefox will rebuild the file search.json from the default search engines in the browser\\searchplugins file in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

• Cannot delete the downloaded file.

  I made a simple upload form and try to use the cffile to download, rename, and delete the original file. Thus, the process goes like this.

  Step 1: The user will browse their computer to capture the image they would like to download (ex: picture1.jpg). then click on the button transfer.

  Step 2: Use a cffile which would be to download the file. (picture1.jpg)

  Step 3: Other cffile to rename the original to the user ID picture that I have in the database. (renamed in 1 ".jpg")

  Step 4: Then another cffile to delete the original picture file, so there is only 1 picture, which is that of the renowned cffile. (on server, deleted picture1.jpg 1.jpg)

  hope that makes sense. Here's the code I used to try to get there.

  I always get an error on the part of remove code.

  = Download form =.

  < cfform enctype = "multipart/form-data" method = "post" >

  < h1 > photo download form < / h1 >

  < cfinput type = "file" name = "fileUpload" required = "Yes" message = ""-must add file! "/ >"

  < cfinput type = "hidden" name = "UserID" value = "#URL. User #">"

  < cfinput type = "submit" name = "file_submit" value = "Upload File" / > < br / >

  < / cfform >

  < isDefined ("fileUpload") cfif >

  < cffile action = "upload".

  fileField = "fileUpload".

  destination = "C:\ColdFusion9\wwwroot\website\pimages".

  accept = "image/jpg, image/jpeg, image/pjpeg.

  nameconflict = "makeunique" >

  < font size = "+ 1" > the file has been downloaded. < / make >

  < cffile action = "Rename".

  source = '#FORM. "FileUpload".

  destination = "C:\ColdFusion9\wwwroot\website\pimages\ #FORM. "UserID # .jpg" >

  < cffile action = 'delete '.

  file = 'C:\ColdFusion9\wwwroot\website\pimages\ #FORM. FileUpload #">"

  = Download form =.

  K0rrupt wrote:

  So now my question is this. Is it possible that I can remove 'everything' in the C:\ColdFusion9\wwwroot\website\temp_images\ if I had to make another file of cfm for this function?

  Make sure that some files are in C:\ColdFusion9\wwwroot\website\temp_image. Then complete the following test beforehand.

  This lets you see how ColdFusion stores the directory as a query object. The code that you need follow.

  is the deletion of files in the directory