Cannot delete the data and source ERPI loading system rules 11.1.1.3
Hello
I am trying to remove the source system screen ERPI in the workspace (what of more, we use in our application UAT), but it throws to up and say error message "could not delete the Source System. There are Applications associated with this Source system targets. Please remove all associated target Applications. »
I tried to delete the data load rules, but are all not valid and deletion icon (trash) is disabled.
Can someone help me how to clean these invalid instances?
Version: 11.1.1.3
Thank you
Jehanne
Figured out, remove the application of "Target Application Registartion" and your rules of metadata and loading data are deleted.
Tags: Business Intelligence
Similar Questions
-
Cannot delete the history and Top Sites
Hello
I use Firefox Mobile 26.0.1 on a Fairphone with Android 4.2.2.
I am fully aware of how I have to delete the history (and Top Sites):
Settings-> privacy-> clear-> private data (select all) clear dataAfter doing this, I have not even alert "PrivΘes deleted" pop up, but it has no effect. All sites of history and high are still there.
I just UN - and reinstalled the app of the in-game store, so there should be no modules are no longer. Previously, I had installed "CleanQuit" app.
(https://addons.mozilla.org/de/android/addon/cleanquit/)
It erases the history to the closure of Firefox which has worked well.
But I can't delete the history in the way described above...Best regards
DieterHi again,
I just watched another question, I've had with entries Add on endangered in the menu. I found this is the bug 832990.
After you turn off the checkbox 'do not keep activities' in the developer settings, I'm now able to clear history as it should!
-
cannot change the date and time in the system restore
How can I change the date and time in the system restore? When I try to create a new restore point, I can't change the date and time, the system automatically date and time in.
System Restore will always set the date and time of any restore point created at the effective date and time of the machine.
If you want to restore your computer to a date and an hour earlier, you must select restore from a restore point that was created at the earlier time. This article explains how.
With the help of the Windows Vista system restore
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/My apologies if I misunderstood your question. Why should change you the date and time when a restore point was created? The only possibility of achieving a fictitious date and time will result in a change as actual date and time Windows or in the Bios, either option with unforeseen consequences.
-
Hi all
My client would like to dynamic images up to 200 photos to my forms. It works very well. However, when I add images up to 35 images. I could not add images to shape more. Then I save data on the form. All the images and the data entered on the form are missing. I don't know why.
If I add only 10 images - I can record data and images on the form. 15456 KB is the size of the pdf. I was unable to add more photos or data on the form.
There may be a problem the size of the pdf? How big can make a limited dynamic pdf?
Can save us the information and images as much as we want?
I spent two weeks to work and trying to figure out this problem. However, it is not successful.
Help, please
Cindy
You must ensure that your users do not import large images.
Therefore, you can use a script on the change event of an image field that checks the size of the data and warns the user if the file is too large.
function formatNumber(number) { var num = number + '', x = num.split('.'), x1 = x[0], x2 = x.length > 1 ? '.' + x[1] : '', rgx = /(\d+)(\d{3})/; while (rgx.test(x1)) { x1 = x1.replace(rgx, '$1' + ',' + '$2'); } return x1 + x2 + "KB"; } var sizeLimit = 200, //allow upto 200KB images thisSize = Math.round((this.value.oneOfChild.value.length * 3 / 4) / 1024); if (sizeLimit > 0) { if (thisSize > sizeLimit) { xfa.host.messageBox("Note: With " + formatNumber(thisSize) + " the size of the imported image is greater that the recommended maximum of " + formatNumber(sizeLimit) + ".\nLarge images can cause a insufficent performance.\n\nIf possible, use images with the following recommended specs:\nFormat:\t\tPNG or JPG\nColor depth:\t8 Bit (higher is not supported)\nColor space:\tRGB (CMYK is not supported)\nFile Size:\t\t" + formatNumber(sizeLimit), "Recommended image size exceeded", 3, 0); } }
-
Satellite P100 - cannot delete the data from CD - RW disks
I have a laptop Toshiba Satellite P100.
According to the user manual it says:
You cannot delete partially all the data written to a CD - RWI thought the idea of using a CD - RW so you could delete everything that you wanted to and use this part of the disc again and again.
Can someone explain?
I didn t find this info in the user manual and if you burned a few data on the CD - RW disks, then it should be possible to format this CD - RW by using a tool like Nero Burning ROM third 3rd for example.
I've done several times using Nero and still managed
-
Original title: access is denied cannot remove the device
my Canon MX340 printer worked fine until the scanner stopped working advises by canon for uninstall programs / drivers and icon / as asked today did nothing working and used to install programs / drivers and can not remove the icon from the Control Panel, access is denied. Clues
THX
Hi Tony,.
Please help me with the following information pricing to this question:
1 is your computer and the printer connected to a network or domain?
2 are logged in as an administrator on the computer?
3. What are the programs that you are not able to install on your computer and provide also us whne exact error that you are trying to install programs?
I suggest you refer to the suggestion provided by Waseemulla Shariff said on March 17, 2012 in the following link:
Once you remove the printer successfully, you try to install the printer drivers from your printer manufacturer's website and check the functionality. Consult the following link:
If you are not able to install any program on your computer, I suggest refer you suggestions provided by Sandeep Dsouza said on June 13, 2012 in the following link:
Please answer us on the State of the question to help you further.
-
Windows live messenger, message get the application could not start due to its configeration side by side is incorrect. see the application log. This means nothing to me. I have uninstalled and reinstalled several times?
The issue is part of Windows Live Solution Center.
Thanks for posting to the category of Messenger: http://windowslivehelp.com/forums.aspx?productid=2 for the benefit of other people looking for answers, please mark as answer suggestion if it solves your problem. -
Hello
I have filenames with weird values inside (created by Application software).
Here is an example:
GIBtmpphoto0_11:27:16.145.pngWhen I try to delete it, I have the following error:
The specified file is not valid or too long. Specify a different file name.And it takes a lot of space in my hard drive.
How is it possible to remove it?
Thank you.
Best regards
MarcOriginal title: delete files with weird names
Hello
My corrupt files are found on a disk of material on my computer.
I have re-formatted the full disk to remove these files.Best regards
Marc -
A POPUP OF WARNING SHOWING A SHIELD (SIMILAR TO THE WINOWS SECURITY CENTER SHIELD ICON) INDICATING THE NEED FOR SYSTEMWIDE PERFORMANCE ANALYZES POTENTIAL NEW THREAT. BELIEVING THAT IT WOULD BE PART OF MY WINDOWS PROGRAMMING I SCAN, NOW A LARGE SHIELD OF BLUE LANCE BEGINS TO BURST UPWARD SEVERAL TIMES WANTING ME TO REGISTER TO THIS REMOVAL PROGRAM FOR 1 TIME LIFE COSTS $ 79.99, I DECLINED HIS OFFER, NOW THAT BLUE SHIELD NPOPUP IN RELENTLESS TO STOP EVERY 5 MINUTES OR SO TO THE POINT OF EXASPERATION ON MY PART HOW CAN I KILL TGHIS DAEMON PROGRAM? »
http://www.TechJaws.com/how-to-remove-security-tool-virus/
The foregoing may be what you have. I searched on Google for "usurpation of virus removal" and you can read other sites as you wish.
He says to Dnload and run Malwarebytes free App (http://www.malwarebytes.org/)
OR follow the instructions in this thread above.
Hope this helps, and I'm sure you learned your lesson about enforcement of the strange applications that appear suddenly.
-
Cannot delete the folder where the backup is saved.
I have recently reinstalled Windows.
I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.
now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.
I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".
Can you help me? This file is large and takes place on my hard drive.
Hello
1. what happens when you try to delete the folder?
2. do you get any error code or error message?
I suggest to try to delete the file in safe mode and check if it helps
Start in Safe Mode:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeAlso try the steps in the following Microsoft article and check if this may help.
Why can't I delete a file or folder? :
http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
Hope the information is useful.
-
Cannot delete the VM files from the browser to store data
Hello
We have ESX 3.5 Update2
I have deleted a VM disk by using Infrastructure Client 2.5, but cannot delete browser data store.
What is wrong and how to fix this?
Restart the agents on the ESX host management and try again
service mgmt-vmware restart
-
ERROR: Cannot open the data source for the user
Hello, I followed the instructions in the URL below
http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
and I get the ERROR: cannot open the data source for the user
I run the sql for the role but nothing
any ideas please.
Sun solaris operating system
database version 9.2.0.7Previous question that you were:
Where did you get the GoldenGate for Oracle 9i software? -
Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right
Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r
s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity. -
IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?
Hi JRCLNSIN100,
Welcome to Microsoft Answers Forums.
We would like to get some more information from you to help solve your problem. You better, please answer the following questions.
· What is the disk you use to reinstall?
· Is this a recovery or reinstalling the disc you are using?
· When exactly do you get this error message?
· What is the edition of Windows Vista, you try to install?
· How old is the drive that you are using?
· How are you starting the installation process?
After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.
First check if you have scratches or dust on the disc and clean the surface and try again.
To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.
To perform a flat installation of Windows Vista, follow these steps.
Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:
http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx
- Insert the Windows Vista installation disc.
- Start Windows Explorer.
- In Windows Explorer, click to select the drive for the Windows Vista installation disc.
- On the Edit menu, click select all.
- On the Edit menu, click copy.
- Click to select the hard disk you want to contain the flat installation files.
- On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
- Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
- Double-click Setup.exe, and then follow the instructions that appear.
See the link below for more information on flat installation.
How to perform a flat installation of Windows Vista
http://support.Microsoft.com/kb/928902
This problem can also occur if the firmware of the DVD drive is defective or obsolete.
If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.
For more information please visit the link below.
Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".
http://support.Microsoft.com/kb/930984
Hope this information is useful.
Let me know if it worked.
All the best!
Thanks and greetings
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot delete the file. Says "not not found could not find this item check the location of this object and try again."
I got this file from my friend got sent - is a word document, I had on their computer. So I tried to use Disk Cleanup to delete temporary files, temporary internet files and files program downloaded. Does not work.
When I check the properties, there is no security tab so I can't transfer ownership in this way.
I don't want to experiment using the way of the transfer of ownership command prompt as the name of the file is several sentences long. I can't rename it either, of course.
Windows 7, a week and I already have a stupid problem which has already lost an hour of my time.
What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away. Once registered. I click with the right button on the new file and rename the exact name as the file problem. Don't forget to change the file extension (ex: .doc)
ex file problem: word.doc
new file: word.doc
as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.
Maybe you are looking for
-
Sometimes I get a blue screen depends on the ati configuration for two screens.Should which driver I install to solve this prb. ?
-
How to make a bar of his badge to work with Windows xp
How to make a bar of his badge to work with Windows xp pc
-
I bought a new computer that does not come with paint, where can I download it from?
-
BB 10 Service integration, sample invocation
I created somes apps and games for BB10 using AIR and want to have qualified for B4B apps. The most important requirement for B4B "BlackBerry 10 Service intégration", has everyone, example code for the integration of BB10 services? I guess that same
-
Hello I am developing a basic application by using the web development kit and I'm running a problem with some divs. I have a div that displays a button, and when you click the button, the div is hidden. The button calls a javascript function that af