Cannot delete the file because the file is in use

Similar Questions

• FFis already running but not responding do not mistake... Cannot delete the parent.lock "in use" what to do now?

  I keep getting FF or error that responded to the questionnaire. When I close it I get "your FF profile cannot be loaded.

  I read about the removal of the parent.lock. When I try to delete told me "can not delete the file because it is being used.

  So what do I do now to get FF going

  You can delete the file immediately after the computer starts?

  Help if you start Windows Explorer as an administrator?

  You can create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• cannot delete the folder I am one user have access to all the files and folders can remove any but one could take ownership of disk backup file

  Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right

  Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity.

• I get a msg saying windows media player cannot delete a file from the device. What should I do?

  I put an album on my sansa fuse. The synchronization process has not finished now correctly the album does not work on my mp3 player. I tried to remove it so that I can re sync and im getting this msg saying "windows media player cannot delete a file from the device." I also tried to delete the album directly from the mp3 player and it does not always remove. What should I do?

  Hi danat4489,

  You can follow the steps described in the article below and then check if it makes a difference

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• Cannot delete the file. 'trial' "impossible to find this element". It is neither located in C:\Users\master\desktop.

  I have a folder called test on my desk that I created to try the xcopy commands.  Anyone who has nothing to do with it.  I think that when I created the folder I could add a space somewhere in the file name.  He is currently empty that I deleted a word of her documents.

  However I can't remove it.   It says cannot delete the file. "Cannot find this item. It is neither located in C:\Users\master\desktop.  Have already tried to delete the file in safe mode but not no luck.  Also if I navigate to the path C:\Users\master\desktop folder is not there and I hid the displayed files.  If I right click a properties to create the size is 0bytes and created a modification dates are suppressed.  How can I delete the file?

  
  

  '\\?\%userprofile%\desktop\trial*' of RD/s
  '\\?\%Public%\desktop\trial*' of RD/s
   
  Note the * appended to the name.
  --
  ..
  --
  "J.Summers" wrote in message news: a8ec7720-22a6-465f-bbbe-a27df3ace7a2...
  > Ok, I tried both commands and came to the same thing.
  >
  > Other ideas please?
  >
   

• Cannot delete the file. Says "not not found could not find this item check the location of this object and try again."

  Cannot delete the file.  Says "not not found could not find this item check the location of this object and try again."

  I got this file from my friend got sent - is a word document, I had on their computer.  So I tried to use Disk Cleanup to delete temporary files, temporary internet files and files program downloaded.  Does not work.

  When I check the properties, there is no security tab so I can't transfer ownership in this way.

  I don't want to experiment using the way of the transfer of ownership command prompt as the name of the file is several sentences long.  I can't rename it either, of course.

  Windows 7, a week and I already have a stupid problem which has already lost an hour of my time.

  What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away.  Once registered.  I click with the right button on the new file and rename the exact name as the file problem.  Don't forget to change the file extension (ex: .doc)

  ex file problem: word.doc

  new file: word.doc

  as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.

• Cannot delete a file in windows 7. Indicates the specified file name is not valid or too long.

  Hello everyone, I'm pretty stuck here. I can't delete a file in windows 7 or any other do with it besides. Says "the specified file name is not valid or too long. It has a funny name [~ t] and no extension. The file type, say "file". The properties are all screwed looking with a mistake on the Security tab, a size of 0 k, is a Windows (c) \Windows\en-US.The other files in this folder appear normal. The computer seems to work very well without any obvious problems. The only problem is my anti-virus reports with a kind of syntax for the file error and indicates it cannot parse this file. I do not. I can't do a thing with it either. Cannot open, rename, move, delete, change passwords, properties, permissions, nothing. It may be necessary for a good part with 0kb. According to me, I want to just delete the thing. Please, anyone? Thanks in advance.

  Hey bud, I figured out how fix it earlier. I am so happy. I came to remember a command called chkdsk which worked very well for various issues, that I had since the construction of my old 2000 Professional machine. I think that one was my first NTFS system. I always liked how well he error correction. Seemed a lot better than the old scandisk. Low and behold, I tried and star ANISE, it is went through it, found this file almost from the beginning of the analysis and a few lines later, he said has been removed. Says something about the file being orphaned some time ago. It was a very bad child, that I tell you. I ran it in safe mode command prompt. I guess he would have done the same thing in the normal windows well, but I happened to be in safemode, when it came to me. I used the switch /f with her. Since the C:\ command prompt or any drive letter your operating system is selected, type CHKDSK/F if I remember although the f was to have it automatically CORRECT errors. I hope this info helps others with their file or disk problems. It seems that many people say they get mistakes and cannot delete various files here in these forums. Thanks Sandeep for answering me and try to help. It does not matter whether or not it was the fix, it takes time to post and your helping people learn to be it. The only thing that remains unanswered for me is actually the thing of the answer. I mean I can't say someone at - it really answered my question and do not count me? Maybe I should mark so that people will bother to read it and get the fix. HMMMM... I come back here some time later and see whats up.  SeeYou, EWOO

• Extractdion failed, cannot delete the output file

  I have Windows Pro 8, 64-bit, 8G of RAM.

  When you try to install the drivers of HP, I get the following error.  Extraction failed, cannot delete the output file.  I get the same error using the download I used to use with Win 7 and a new download from the HP Web site.  I have also tried to run the program as an adminitratior and get the same error message.

  I managed to do the work.  I found on my C drive the location of the files when extracted and run the installation program from there.

• CANNOT OPEN OUTPUT FILE, CANNOT DELETE THE OUTPUT FILE

  Try to patch effect for Deskjet 722C for Windows 7.  Not able to replace the existing .dll files.  Error messages: could not open the output file, cannot delete the output file.

  Thank you for your response.  I found these solutions but still had problems.

  However, I was able to bypass Windows with a DOS command that did the trick.

  C:\Windows\System32>copy C:\temp\hpvdb720.dll C:\windows\system32\spool\drivers\x64\3

• Cannot delete the file opened by system error

  Hello.

  I'm in serious trouble. Recently, I created a 10 GB virtual hard drive for one of my virtual machines, but it was not recognized by the virtual machine.

  So, I decided to delete it, but showed an error saying that the file is open in the system. I checked all my programs and none were using it.

  I'm running out of space on my drive. So, any help would be appreciated.

  Thank you.

  OK, I managed to delete the hard drive virtual using the secure with command prompt Mode.

• Impossible to remove an unknown account, get the error 'cannot delete the unknown account because this object inherits permissions from its parent.

  I have several programs that when I go to security there is an unknown account and when I try to delete unknown account I get this message that you cannot delete the Unknown(S-1...) account because this object inherits from its parent perssions. To delete the Unknown(S-1...) account, you must prevent this object from inheriting permissions. Turn off the option for the inheritance of permissions and then try to delete the Unknown(S-1...) account again. I tried the edit and advance features in respect of security without success. Why have I not control over security permissions?

  Found a solution to this problem.

  Go to the folder parent of the folder that contains the files with this unknown account number:
  1. right click on the PARENT folder, and then click Properties.
  2. on the Security tab, go to the advanced options (bottom window)
  3. in the new window, click the button change the permissions in the bottom.
  4. Select the Group (NOT AUTHENTICATED, just of users USERS) users
  5. check "replace all permissions of child object with permissions inheritable of this object.
  6. click on the OK button or apply and done, fixed number.

  Hope this helps anyone else having this problem, for me it happened after reinstallation of win 7 on the same machine and keep my images on another partition, so it was spared by the new facility, so the old user account was always on the file permissions.

• Cannot find the left column that used to be on the documents and photo files.

  Cannot find the left column that used to be on the documents and photo files. On this missing column I know was there before, had options fax, copy and other things we could do with these files. I want to get that back. Thank you.

  With my Documents folder open, go to Toolsand then click on Options files . On the general tab, tasks section, choose Show tasks in folders.

  I would like to know if it works. Thank you.

• Cannot delete the folder where the backup is saved.

  I have recently reinstalled Windows.

  I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.

  now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.

  I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".

  Can you help me? This file is large and takes place on my hard drive.

  Hello

  1. what happens when you try to delete the folder?

  2. do you get any error code or error message?

  I suggest to try to delete the file in safe mode and check if it helps

  Start in Safe Mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Also try the steps in the following Microsoft article and check if this may help.

  Why can't I delete a file or folder? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  Hope the information is useful.

• Cannot delete a file 'empty '.

  I recently downloaded a file and thought I had deleted. However, I managed to create a 0 byte file that appears on my desktop, appears in the file dir / x of order invites and still cannot be moved, renamed, or deleted. Windows reports, "failed to find this article. It is no longer in... ».

  My problem is similar to the "cannot delete illustrates file listed in the file Explorer Vista - does not exist?" thread. I tried several of the steps used in this situation, as the use of a third party file removal tool (KillBox) and also get into the command prompt and try Rd (filename) to remove. I also tried to use e/s (filename), but he kept reporting that "the directory name is incorrect.

  This file is also not protected, and I am logged on as administrator. Any thoughts?

  Hello MrMichael,

  Thank you for using Microsoft Vista answers Forum!

  Try to start your PC in safe mode by following the steps below and see if you can delete that folder/file from there.

  How to start in safe MODE

  1. Restart your computer if it is running.
  2. Press the F8 key after your computer powers initially.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. Up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and press enter.
  6. You should see loading drivers and then Please wait.
  7. You should then be on the Welcome screen.

  Connect to your computer using an account with administrator privileges.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Cannot delete the application role - error OBIEE main

  I tried to fix my personal account of OBIEE today and tried to remove me an applicaation role in enterprise manager and received the following error

  Cannot delete the main application role; main < user name > is not a member of the application role < role >

  Has anyone seen this error?

  My user id also seems to be capitalized - ex userid: Userid rather than what I expect it to be in all the tiny userid

  Hi Christian

  You are right that I am on 11.1.1.7.140225

  I was able to fix this very weird error in fact goes here/home/itadm/u01/obiee/user_projects/domains/bifoundation_domain/config/fmwconfig

  Open the file system-jazn - data .xml

  And by removing the additional entry manually

  So I deleted the following

  weblogic.security.principal.WLSUserImpl rodneyc

  Then when I went back to EM the user had gone as planned. I'm guessing that something screwed up in this file, but all right

  Thank you for the help

• Cannot delete the tablespace

  Oracle 10.24
  64 bit SPARC Solaris 10.5
  
  I am trying to drop a tablespace to resize my original tablespace, I created, but get the following error:
  

  SQL > drop tablespace backup_ts including content and files of data cascade constraints;
  Drop tablespace backup_ts including the content cascade constraints and data files
  *
  ERROR on line 1:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-02429: cannot delete the index used for the application of the unique/primary key

  I also delete all tables in the tablespace (backup_ts) and always error.

  Yes... These are clues... (which must be deleted or rebuilt to a different tablespace)