Cannot delete the music due to the error of the Admin
Hi all, I recently met a mistake with my administrator account. Whenever I try to delete a file or a folder in 'My music', I get a message saying "you need to provide the staff privileges to perform this action." I am the only admin on my laptop, but it told me I must ask permission to administrator with the administrator. He also mentioned the name of my admin profile (S117/mozman). I tried to take possession of the file, to see that I have already. Change permissions does not work and the possibility to apply the change to all folders and containers in the folder is grayed out permanently. I'm out of space fast hard drive and so far have not allowed to delete anything music, photos, videos or any other media besides file. Any assistance or solutions would be greatly popular. Thank you =)
Well, I tried this and I've had some success. I stopped getting the message "you need administrator permission", and instead he traded in the ' cannot delete files: access is denied "or something like that. In all cases, I did all my permissions and other things, it turns out that some malicious software must have gotten past my windows firewall and established a camp in my music folder. A scan quick rootkit well fixed. Thank you very much for your contribution :)
Tags: Windows
Similar Questions
-
Cannot delete the application role - error OBIEE main
I tried to fix my personal account of OBIEE today and tried to remove me an applicaation role in enterprise manager and received the following error
Cannot delete the main application role; main < user name > is not a member of the application role < role >
Has anyone seen this error?
My user id also seems to be capitalized - ex userid: Userid rather than what I expect it to be in all the tiny userid
Hi Christian
You are right that I am on 11.1.1.7.140225
I was able to fix this very weird error in fact goes here/home/itadm/u01/obiee/user_projects/domains/bifoundation_domain/config/fmwconfig
Open the file system-jazn - data .xml
And by removing the additional entry manually
So I deleted the following
weblogic.security.principal.WLSUserImpl rodneyc Then when I went back to EM the user had gone as planned. I'm guessing that something screwed up in this file, but all right
Thank you for the help
-
I have several programs that when I go to security there is an unknown account and when I try to delete unknown account I get this message that you cannot delete the Unknown(S-1...) account because this object inherits from its parent perssions. To delete the Unknown(S-1...) account, you must prevent this object from inheriting permissions. Turn off the option for the inheritance of permissions and then try to delete the Unknown(S-1...) account again. I tried the edit and advance features in respect of security without success. Why have I not control over security permissions?
Found a solution to this problem.
Go to the folder parent of the folder that contains the files with this unknown account number:
1. right click on the PARENT folder, and then click Properties.
2. on the Security tab, go to the advanced options (bottom window)
3. in the new window, click the button change the permissions in the bottom.
4. Select the Group (NOT AUTHENTICATED, just of users USERS) users
5. check "replace all permissions of child object with permissions inheritable of this object.
6. click on the OK button or apply and done, fixed number.Hope this helps anyone else having this problem, for me it happened after reinstallation of win 7 on the same machine and keep my images on another partition, so it was spared by the new facility, so the old user account was always on the file permissions.
-
You cannot delete the pattern used to the absence of an employee
We are on 11.5.10, there is one issued due to the Absence. Suggest, we created type absence as "Time off" and attached reason which is mentioned below. After a while, we decided to remove the specific reason so that this employee cannot select this reason while submitting to authorization through self-service. Although we have disabled that always shows the reason for the "ABSENCE_REASON" research but employee self-service creates leave.
"However, when I try to remove holiday because of the type of absence as mentioned above, then system will trigger the message" error MESSAGE: "you cannot delete the pattern used to the absence of an employee.
Reason
1 accident
Appointment 2.doctor
3. others
How can we remove the 2nd reason (doctor appointment) to the list even if it has already been used in absence transactions.
Thank you.Have you tried to value in the research of reason for the absence of end date?
Also clear the Cache before testing...
-
Cannot delete the folder where the backup is saved.
I have recently reinstalled Windows.
I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.
now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.
I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".
Can you help me? This file is large and takes place on my hard drive.
Hello
1. what happens when you try to delete the folder?
2. do you get any error code or error message?
I suggest to try to delete the file in safe mode and check if it helps
Start in Safe Mode:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeAlso try the steps in the following Microsoft article and check if this may help.
Why can't I delete a file or folder? :
http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
Hope the information is useful.
-
Cannot delete the registry key
I use Vista as an administrator. I would like to delete the following: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USBSTOR\Disk & Ven_RIM & Prod_BlackBerry_SD & Rev_0003. I right-click and click on delete. I wonder I want to permantently delete the key and subkeys, click Yes. I get a message saying ' cannot delete the disk & Ven_RIM & Prod_BlackBerry_SD & Rev_0003: error while deleting key.»
I'm with the right button and go to permissions. I try to change the permissions for everyone and the OWNER RIGHTS to full control. I get the message saying "cannot save changes to permissions on disk & Ven_RIM & Prod_BlackBerry_SD & Rev_0003. Access is denied. »
Should what step I take then to perform this deletion? Thank you!!!
Establish you as the owner of the key first, then give you all the permits "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
partition 'Windows cannot delete the active system partition on this disk.
I created a partition of HARD drive in order to install a system in multiboot using XP and Vista, but I did mess up the BONES of the two. Now I want to do a clean install of Vista ONLY, but I don't know how to get rid of the partition! * Example: Computer management > disk management > right-click on the volume (M) > Delete Volume * but I get an error: "Windows cannot delete the active system partition on this disk" can someone help me to get my Vista to original?
P.S. I have the "Microsoft Windows Vista Home Premium32 - bit Operating System Disk" provided with my computer when I bought it new. Thank you! -Jeff
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
Delete the existing Partitions during the process.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
See you soon.
Mick Murphy - Microsoft partner
-
Access is denied, cannot delete the hp LaserJet 1320 PCL 5 device
HP LaserJet 1320 PCL 5 can not delete from my PC (Windows 7). Get the message "access is denied, cannot delete the hp LaserJet 1320 PCL 5 device".
Any help will be greatly appreciated.Hello
Method 1:
Run the fixit available in the link below and check if that makes a difference
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2: Perform a clean boot and check.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.If the problem persists, I will be asked to contact the hardware manufacturer for assistance:
Hope the above information is helpful.
-
Extractdion failed, cannot delete the output file
I have Windows Pro 8, 64-bit, 8G of RAM.
When you try to install the drivers of HP, I get the following error. Extraction failed, cannot delete the output file. I get the same error using the download I used to use with Win 7 and a new download from the HP Web site. I have also tried to run the program as an adminitratior and get the same error message.
I managed to do the work. I found on my C drive the location of the files when extracted and run the installation program from there.
-
CANNOT OPEN OUTPUT FILE, CANNOT DELETE THE OUTPUT FILE
Try to patch effect for Deskjet 722C for Windows 7. Not able to replace the existing .dll files. Error messages: could not open the output file, cannot delete the output file.
Thank you for your response. I found these solutions but still had problems.
However, I was able to bypass Windows with a DOS command that did the trick.
C:\Windows\System32>copy C:\temp\hpvdb720.dll C:\windows\system32\spool\drivers\x64\3
-
Oracle 10.24
64 bit SPARC Solaris 10.5
I am trying to drop a tablespace to resize my original tablespace, I created, but get the following error:
SQL > drop tablespace backup_ts including content and files of data cascade constraints;
I also delete all tables in the tablespace (backup_ts) and always error.
Drop tablespace backup_ts including the content cascade constraints and data files
*
ERROR on line 1:
ORA-00604: an error has occurred at the SQL level 1 recursive
ORA-02429: cannot delete the index used for the application of the unique/primary keyYes... These are clues... (which must be deleted or rebuilt to a different tablespace)
-
Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right
Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r
s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity. -
I have a folder called test on my desk that I created to try the xcopy commands. Anyone who has nothing to do with it. I think that when I created the folder I could add a space somewhere in the file name. He is currently empty that I deleted a word of her documents.
However I can't remove it. It says cannot delete the file. "Cannot find this item. It is neither located in C:\Users\master\desktop. Have already tried to delete the file in safe mode but not no luck. Also if I navigate to the path C:\Users\master\desktop folder is not there and I hid the displayed files. If I right click a properties to create the size is 0bytes and created a modification dates are suppressed. How can I delete the file?
'\\?\%userprofile%\desktop\trial*' of RD/s'\\?\%Public%\desktop\trial*' of RD/sNote the * appended to the name.--..--"J.Summers" wrote in message news: a8ec7720-22a6-465f-bbbe-a27df3ace7a2...> Ok, I tried both commands and came to the same thing.>> Other ideas please?> -
Photosmart C6380 - cannot delete the document removed from the print queue.
Photosmart C6380 - cannot delete the document removed from the print queue.
Hello
From the desktop, hold down the Windows key and press R. In the run window, type services.msc and press to enter. Scroll down to the print spooler , made service right click and select Properties, then click the Stop button. Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
Restart the computer and you should find that the documents have been deleted.
Kind regards
DP - K
-
Cannot delete the file. Says "not not found could not find this item check the location of this object and try again."
I got this file from my friend got sent - is a word document, I had on their computer. So I tried to use Disk Cleanup to delete temporary files, temporary internet files and files program downloaded. Does not work.
When I check the properties, there is no security tab so I can't transfer ownership in this way.
I don't want to experiment using the way of the transfer of ownership command prompt as the name of the file is several sentences long. I can't rename it either, of course.
Windows 7, a week and I already have a stupid problem which has already lost an hour of my time.
What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away. Once registered. I click with the right button on the new file and rename the exact name as the file problem. Don't forget to change the file extension (ex: .doc)
ex file problem: word.doc
new file: word.doc
as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.
-
Original title: locked.
have laptop computer grandsons at home, hes forgotten his password and I cannot remember the admin password I put on, how can I open it
XP - if you forgot your password:
http://support.Microsoft.com/kb/321305
Microsoft's strategy concerning lost or forgotten passwords:
http://support.Microsoft.com/kb/189126
Maintaining secure passwords - Microsoft strategy on getting around passwords:
Maybe you are looking for
-
My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it? It also won't let me select "Exceptions" or "Change master password" Thank you
-
HP 840 G3: 840 G 3 Intel Driver Bluetooth - silent installation - MDT - does not
In the hope of assistance Intel Driver of Bluetooth does not work well when you deploy the driver as an application through the MDT task sequence. I'm running in question when using MDT Lite Touch 2013. Even if I was able to import this driver as an
-
G10: Question about firmware UJ - 831 S.
I updated my firmware for the UJ - 831 S DVD RAM of my G10 to 1.02. He still does not write platinum DVD + R 8 speed (A2Z MID'DAXON) at the right speed. It is still burning speed 2.5.When is a new firmware with the latest ID. til (A2Z DAXON for examp
-
Satellite A-L50-1CU - no separate for the headset and speaker volume sliders
Why there is no possibility to control the volume of the headphones separately? I risk my ears (seriously) every time I use headphones, due to the low efficiency of the speakers... Any suggestion?
-
Error in Unit Test Framework: "the path of the VI test is not valid."
I get this error on files lvtest for a few screws, it appears so when I click on the button "import values of VI. The unit test framework correctly on some screws, but some work raise the error. I tried to move and rename the files and of coarse ch