Cannot deploy the sample applications of the MAF

I try to install some of the sample applications on the MAF ( jdev_install/jdeveloper/jdev/extensions/oracle.maf/Samples Directory) on my Android (version 4.4.2) phone without success.

I use jDev build JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S

If I have a deployment on an Android package using default deployment profiles, I get the following error:

"Impossible to deploy the profile because the project 'ViewController.jpr' is not a MAF ApplicationController or ViewController project. (oracle.adfmf.framework.dt.deploy.features.deployers.FeatureArchiveDeployer).

I searched this error in this forum and found this:

MAF: Build Error "adfmf - not found feature.xml.

Then I updated the patch of the MAF, and I still get the same error.

I then fiddled around a bit dependencies of properties/deployment/Android1/Application Profile

Now I can deploy on my phone, but the application hangs on the splash screen.  Can anyone advise on what things should be checked in the profile dependencies?

Profile Dependencies.JPG

OK, I finally understood what is the question.

After installing the patch of the MAF, jDev so ask to restart your computer, but for some reason any on my computer this can last from a few minutes to a few days!  The first time that I installed the patch, after a reboot, through the Assistant jDev update request I clicked on OK and jDev stop and waited so he could restart. 5 minutes later, it started so I thought I'd launch myself, so I did.  But what I didn't know that in my list of system processes, jDev was still working (perhaps even install the patch).  Here's a screenshot of my system process (that I took during my third attempt, since I suspect something):

Thus, while this process jDev was hanging out, I started jDev myself and ended up having two jDev processes running.  One that I started manually didn't have the MAF Patch applied, but I thought he did it because I just went through the Update Wizard.

And so all the trouble, I have tried to deploy the sample applications of the MAF.

I didn't knew that this much later because a few days later, a splash jDev screen suddenly arisen WHILE I was USING jDev, I knew was because the first time, install the patch jDev prompted to restart the computer.

Only on the third time reinstall jDev and the patch of the MAF has waited more jDev to restart, and when he finally did restart on its own (3 minutes later) that I checked my installation of the fix for the MAF and found that it was installing successfully.

I then tried to deploy the sample applications of the MAF again and this time it worked.

So, in summary, because he took if jDev long reboot after installation of the patch of the CRG, I advanced and started jDev myself, but this instance of jDev, I started upward has not installed the fix of the MAF, and so the trouble I had to deploy the samples of the MAF.

I hope that something can be improved here so that other users the same tracks as I do not work in the same problems in the future.  It can be as simple as a message before reboot in saying the user to wait jDev restart on its own, otherwise their patch will not install.

Thanks for your time.

Tags: Oracle Mobile

Similar Questions

  • Unable to deploy the MAF application on the emulator or device in the last downloaded SDK

    Hello

    Jdev: 12.1.3

    I was working at the request of the MAF with old android SDK, which has been downloaded a few months back.

    I downloaded the latest SDK the android site form. But now the app is not deployed.

    It throws the below error:

    After a throwugh search blogs I have deployed the apk file directly on the device, but then the initial screen of Red Oracle load forever and I do not get the intended page.

    Please help me.

    [11: 08:52] Server Android Debug bridge closure...

    [11: 08:52] undeployment.

    [11: 08:52] - incomplete deployment.

    [11: 08:52] deployment failed due to one or more errors returned by "C:\Hari\Softwares\Android\android-sdk\platform-tools\adb".  What follows is a summary of the returned error:

    Failure [DELETE_FAILED_INTERNAL_ERROR]

    MAF 2.0.1.2.0 is not compatible Android 5 Lollipop (API 21).  You can leave installed in the SDK, but all 21 API also download API 19 and use instead.

    Lollipop support is coming in the next version of MAF due.

    CM.

  • Cannot deploy the Essbase Cubes, only planning Applications

    I can't deploy Essbase of EPMA cubes. Here is the error message I get:

    Error.

    Could not deploy Essbase cube.

    Caused by: unable to connect to the olap service. Unable to connect to the Essbase server. Error: Essbase Error (1051293): connection fails due to invalid login credentials

    However, when I deploy a planning application it works.

    You use shared services for security. If so, assign the Essbase Applications in security of shared services.

  • Create a VM with LCM 1.0.2 build 4415: cannot deploy the model: cannot complete customization.

    Hello

    I'm french.

    I am currently evaluating LM for its integration in our infrastructure. I set up a model to deploy a VM Windows 2003 R2 Standard x 64.

    The query process works correctly. But the creation of the virtual computer fails. The operation fails at 90%.

    I have the same error every time: "impossible to deploy model: cannot complete the customization.

    I don't understand. The product is not compatible with win 2003 64 x?

    Can you help me?

    My configuration:

    1 ESX Server: 4,0 171294

    1 Vcenter: 4.0 162856

    LCM 1.0.2 build 4415

    Thank you

    Hi boiteavinc,

    LCM 1.0.2 supports this operating system for customization. Most likely, the problem is in VCenter himself.

    Can take you a look at the VC newspapers to see what the problem with the customization?

    In addition, you can try the same cloning/customization directly from VCenter to see if he succeeds?

    If you receive the same error, LCM cannot do much in this situation.

    Kind regards

    Todor

  • Cannot deploy the mapping which is validated fine-problem when debugging

    Hi all


    I have a complex with almost thirty tables involved mapping.
    I created a mapping with the step by step process of t1 Join t2, t2 join t3... t29 join t30
    Mapping looks very good and has been validated successfully.
    When I try to deploy the same he throws me the warnings below...



    How to solve this problem?
    How to locate the exact problem in pls code region generated during deployment.

    Thank you very much!
    SRID

    Here is the warning of deployment



    COPY_OF_MAP_PS_2OJAN
    Create
    Warning
    ORA-06550: line 11, column 3:
    PL/SQL: ORA-00923: KEYWORD not found where expected
    COPY_OF_MAP_PS_2OJAN
    Create
    Warning
    ORA-06550: line 11, column 3:
    PL/SQL: SQL statement ignored
    COPY_OF_MAP_PS_2OJAN
    Create
    Warning
    ORA-06550: line 2247, column 3
    PL/SQL: ORA-00923: KEYWORD not found where expected
    COPY_OF_MAP_PS_2OJAN
    Create
    Warning
    ORA-06550: line 2247, column 3:
    PL/SQL: SQL statement ignored
    COPY_OF_MAP_PS_2OJAN
    Create
    Warning
    ORA-06550: line 4738, column 7:
    PL/SQL: ORA-00923: KEYWORD not found where expected
    COPY_OF_MAP_PS_2OJAN
    Create
    Warning
    ORA-06550: line 4738, column 7:
    PL/SQL: SQL statement ignored


    Summary of the offer
    Update: 2009-01-21 07:38:57.0 job final status: completed WARNING processed job count: 1 number of job errors: 0 Job Alert Count: 6




    My mapping has only 18808 lines when I looked the .pls script generated during deployment (surprisingly... the Debug displays message error is on line 22776)

    When trying to debug the mapping below is the debug message
    Analysis of card to debug...
    Retrieving the connection of Control Center information...
    Connecting to the Control Center schematic...
    The character set of the Control Center schema checking...
    Configuration of the sources and targets...
    Card validation...
    Correlated Commit is DISABLED.
    Generate debug package...
    Deployment of debug temp tables...
    Deploying debug package...
    ***********************************************
    Messages of debug code deployment:
    LINE 22776, COLUMN 46:
    PLS-00103: encountered the symbol "B_BN_BNI_66_BN_ORIGI$ 2" when expecting one of the following values:

    . (* % & = - +; <>/ at mod is still not rem)
    < an exponent (*) > <>or! = or ~ = > = < = <>and or LIKE2_
    LIKE4_ LIKEC_ between | Member of multiset SUBMULTISET_
    The symbol "." was replaced by "B_BN_BNI_66_BN_ORIGI$ 2" to continue. "

    End of messages of debug code deployment
    ***********************************************
    Mapping debugger error:
    oracle.wh.service.sdk.mapping.debugger.WBMappingDebuggerException: DBG1012: Debug deployment errors, can't run debug code.

    Hello

    There is only one version of the software. Whether or not you must license depends on the features you use.

    Generates code in the mapping Editor by using the button "generate".
    In the build results window, select style generation = operating mode and middle = 'Set [PL/SQL] founded.
    Now you must select a group entry or exit of some operator in your mapping.

    The build results window then displays a SQL statement that represents the data that would go in the group you selected.
    Run the SQL directly in your target schema (using sql * plus, sql developer, etc.).
    If the SQL code cannot be run, the problem is in this particular part of the mapping.
    You can try to locate further.

    Good luck
    Carsten.

  • Cannot deploy the listener. Nor to stand alone, or with glass fish

    Hi guys,.

    I use the latest versions of:
    Apex 4.1
    Oracle 11g xe
    apex_listener.1.1.3.243.11.40
    GlassFish - 3.1.1
    Windows 7-64

    I tried to deploy APEX yesterday.
    To fish from glass: I followed exactly the steps mentioned in the documentation. but I get this error:
    State HTTP 503 - requested url http://192.168.1.33:8080 / apex / is currently unavailable.
    type of status report
    URL messageRequested http://192.168.1.33:8080 / apex / is currently unavailable.
    DescriptionThe requested service (requested url http://192.168.1.33:8080/apex/ is currently not available.) is not currently available.
    GlassFish Server Open Source Edition 3.1.1
    yesterday I managed to deploy with stand-alone mode and created a service for her, but the service does not start

    I got this error
    windows failed to start the service apex10 on the Local computer.
    The service has returned an error. This could be an internal Windows error or an error internal servcie
    . So, I was forced to keep the open CMD. Someone reboot the server. I tried to redeploy again, but I get "internal error." And here you can find put it:
    C:\Users\FAM_SERVER>cd C:\Program Files (x86)\Java\jre6\bin\

C:\Program Files (x86)\Java\jre6\bin>java -Dapex.port=2586 -Dapex.home=D:\apex_l
istener -Dapex.images=C:\apex\images -jar D:\apex_listener\apex.war
INFO: Starting: D:\apex_listener\apex.war
 See: 'java -jar apex.war --help' for full range of configuration options
INFO: Extracting to: D:\apex_listener
INFO: Using classpath: file:/D:/apex_listener/apex/____embedded/start.jar:file:/
D:/apex_listener/apex/WEB-INF/lib/apex.jar:file:/D:/apex_listener/apex/WEB-INF/l
ib/commons-fileupload-1.2.1.jar:file:/D:/apex_listener/apex/WEB-INF/lib/je-4.0.1
03.jar:file:/D:/apex_listener/apex/WEB-INF/lib/ojdbc6.jar:file:/D:/apex_listener
/apex/WEB-INF/lib/ojmisc.jar:file:/D:/apex_listener/apex/WEB-INF/lib/poi-3.6-200
91214.jar:file:/D:/apex_listener/apex/WEB-INF/lib/ucp.jar:file:/D:/apex_listener
/apex/WEB-INF/lib/xdb-11.2.0.jar:file:/D:/apex_listener/apex/WEB-INF/lib/xmlpars
erv2-11.2.0.jar:
INFO: Starting Embedded Web Container in: D:\apex_listener
Enter a username for the APEX Listener Administrator [adminlistener]: admin
Enter a password for admin:
Confirm password for admin:
Enter a username for the APEX Listener Manager [managerlistener]: manager
Enter a password for manager:
Confirm password for manager:
Nov 17, 2011 9:22:16 AM ____bootstrap.Deployer deploy
INFO: Will deploy application path=D:\apex_listener\apex\WEB-INF\web.xml
Nov 17, 2011 9:22:17 AM ____bootstrap.Deployer deploy
INFO: deployed application path=D:\apex_listener\apex\WEB-INF\web.xml
Nov 17, 2011 9:22:17 AM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Thu Nov 17 09:22:17 GST 2011
INFO: Please complete configuration at: http://localhost:2586/apex/listenerConfi
gure
Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
java.lang.IllegalStateException: Not yet initialised
        at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:
249)
        at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
        at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
        at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(Admin
Manager.java:868)
        at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java
:841)
        at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
        at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
        at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
.java:195)
        at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
ChainImpl.java:139)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
java:376)
        at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
a:72)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
va:324)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
Chain.java:180)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
91)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
ter.java:170)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
tocolChain.java:135)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:102)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:88)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
:76)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
ask.java:53)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
java:57)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
ool.java:330)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
.java:309)
        at java.lang.Thread.run(Unknown Source)
Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
oracle.dbtools.rt.service.ServiceLocatorException: There are no services defined

        at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.ja
va:91)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
74)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
85)
        at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.j
ava:138)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:
85)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
.java:195)
        at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
ChainImpl.java:139)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
java:376)
        at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
a:72)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
va:324)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
Chain.java:180)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
91)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
ter.java:170)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
tocolChain.java:135)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:102)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:88)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
:76)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
ask.java:53)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
java:57)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
ool.java:330)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
.java:309)
        at java.lang.Thread.run(Unknown Source)
Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
oracle.dbtools.rt.service.ServiceLocatorException: There are no services defined

        at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.ja
va:91)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
74)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
85)
        at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.j
ava:138)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:
85)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
.java:195)
        at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
ChainImpl.java:139)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
java:376)
        at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
a:72)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
va:324)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
Chain.java:180)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
91)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
ter.java:170)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
tocolChain.java:135)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:102)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:88)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
:76)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
ask.java:53)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
java:57)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
ool.java:330)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
.java:309)
        at java.lang.Thread.run(Unknown Source)
Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
oracle.dbtools.rt.service.ServiceLocatorException: There are no services defined

        at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.ja
va:91)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
74)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
85)
        at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.j
ava:138)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:
85)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
.java:195)
        at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
ChainImpl.java:139)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
java:376)
        at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
a:72)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
va:324)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
Chain.java:180)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
91)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
ter.java:170)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
tocolChain.java:135)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:102)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:88)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
:76)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
ask.java:53)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
java:57)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
ool.java:330)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
.java:309)
        at java.lang.Thread.run(Unknown Source)
    Published by: Fateh November 16, 2011 21:42

    Published by: Fateh November 16, 2011 21:46

    Hi Fateh,

    If I do not Dapex.home in the 'startup script", so that this file exists?

    It will be in the directory temp of your users. The actual location of that APEX listener uses belongs to the output of the console at startup.
    But I recommend always using the apex.home parameter, then you can be sure where the APEX listener looking for him and that it is not deleted by some 'clean-up '.

    Yet, when I create a service for the 'start-up' file, I get the same error:

    What account name is the service that is supposed to work? If you do not apex.home , the temp directory will usually be different if you do not use your username. Therefore, you will need a Setup for the account that runs the service.

    So, I need to keep the open CMD...

    No, you could (and should) pipe the console output to a log file. See the full command line in the example I posted here: {message identifier: = 9606494}
    I think that this is the post you mentioned above...

    APEX earpiece not working only not with ORACLE XE (as I know, waiting for patch)
    so far I have faced a problem with Interactive reports do not work correctly with Glassfish

    There are two points to this inaccurate publication:
    1 there is a work around for this problem.
    2. the problem was resolved short after he acknowledged.

    There are many users using listener of the APEX with XE here in the forum. I have two bodies, including one with the new 11.2 XE and APEX 4.1, as in your scenario and it works very well.

    In general, I think that 4 apex is more stable than the Apex 4.1. Apex 4.1 I am disconnected for reason now... A few times, I click on the header of column in IR and takes time to load the values...

    Well, as far as I know, have evolved in the IRs, is not completely improbable that some of these changes could cause new problems. But I guess that you can find answers for this in the forum {forum: id = 137}.

    Do you have any suspicion regarding the glass fish? I deployed Apex listener by following the instructions in the documentation. Then click launch. Then it should start to use port 8080, but it did not work...!

    Hmmm... You see the page default GlassFish ("GlassFish Server - server running") when you callhttp://: 8080? Port number, it is not the APEX listeners case when you do not use offline...
    If you get a result of http://: 8080/apex you could look in the application log in you GlassFish for more information (like in the console in stand-alone mode).
    My first guess would be that you do not have confgured the APEX listener you still deployed. It should be noted that the GlassFish does not use the users temp temp directory, but has its own. So to call listenerConfigure after the first deployment or set up a config.dir with an existing apex - config.xml. I would recommend the latter strategy. You should read the article of the Guide of the Installation on the configuration file and how to set its location in the file web.xml or search the forum for this request (common)...

    -Udo

  • Cannot deploy the bar file BB10 Simulator.

    As the title,

    I have try all the possible method to deploy my bar of file Simulator BB10 running on VMware player without a bit of luck.

    The IP address that I use is the one indicated in the developer section of the simulated device:
    169.254.0.1

    no luck, I can't even ping the device to the windows console.

    Any idea?

    If you are connected to a VPN, it can cause connection problems to the Simulator.

    Could you try reboot the Simulator in bridged mode?  You can change this under the network option in the settings of your virtual machine.  If you do not have to go through NAT, which could cause you problems, this will put the Simulator on your physical network card.

    Also are you able to telnet/ftp to the Simulator?  You can identify yourself as devuser/devuser.

  • 6.1 installation: cannot deploy the VM of Blueprint: no resources

    All,

    I am deployment VCAC 6.1 and just create a blue print and the grant of right.  I have fabric installation groups and reservations in tenant default, then the company's group plan to another tenant facility.  When I try to deploy my plan, it shows failed and newspapers said this:

    Error the applicant unit. Inner exception: an Exception was thrown by the target of a call. Base exception: Machine VCACT1: allocate failed for VM group team to deploy a booking operation. No reservations are available to allocate the resources required.


    Any ideas?

    OK I thought about it. I was reserved not enough storage on my resvervation

  • Cannot deploy the mapping of model code of CDC in OWB 11 GR 2!

    Hi, I have just created a mapping model code of CDC and tried to deployed to the control center. But there is an error like below:

    VLD-0006: SEC-10017: you have no privilege of COMPILATION (generate and validate) on the subject: ICT_SQL_TO_SQL_APPEND

    How to grant privileges? and who (which user)?

    Thank you.

    It looks like only the owner of the workspace initially has privileges on the shared models compilation. If you log on as the owner of the workspace, select the model in the tree, the menu click on view then security, you can either give the privilege to compile ALL or specific users.

    See you soon
    David

  • Error during the deployment of ADF application on weblogic Server integrated in JDEV - [SPI: J2EE deployment 260010]

    Hello Experts,

    I received the following message when I tried to deploy a sample application on the weblogic Server integrated into my JDEV ADF.  Can someone help me with this error message?

    < 27 March 2015 21:30:09 CEST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

    IntegratedWebLogicServer start time: 33630 ms.

    IntegratedWebLogicServer has begun.

    [Running the application on Server Instance IntegratedWebLogicServer SavedSearches...]

    [15:30:11]-deployment began.  ----

    [15:30:11] the target platform's (Weblogic 10.3).

    [15:30:18] # incomplete deployment.  ####

    [15:30:18] [SPI: J2EE deployment 260010] unable to connect to ' t3s: / / localhost:7102' as a user, "weblogic. Error returned: null

    [15:30:18] [SPI: J2EE deployment 260010] unable to connect to ' t3s: / / localhost:7102' as a user, "weblogic. Error returned: null

    [15:30:18] [SPI: J2EE deployment 260010] unable to connect to ' t3s: / / localhost:7102' as a user, "weblogic. Error returned: null

    [15:30:18] t3s: / / localhost:7102: Destination unreachable; nested exception is:

    java.net.ConnectException: Connection refused: connect. No router available at destination

    [15:30:18] Destination unreachable; nested exception is:

    java.net.ConnectException: Connection refused: connect. No router available at destination

    # Cannot run application SavedSearches due to the deployment on IntegratedWebLogicServer error.

    [SavedSearches application stopped and cancelled Server Instance IntegratedWebLogicServer]

    Thank you

    David Selvaraj

    Can user, you please tell us your exact Jdev version?

    The error message tells you that the server has been started, but is not available under the localhost:7102 of access

    The port doesn't look good for me. The built-in Server normally uses port 7101. You can check which port you configured for the server?

    You can check this on the "application server" tab and select the built-in server, right-click, and select Properties. In the dialog box, you see the configuration.

    Timo

  • Cannot create the vDC Org network

    I am trying to create a network isolated for an organization, and I see the following on the creation error message:

    "Cannot deploy the network organization VDC (e90bc014-47f4-43dd-80dc-299228383388).
    com.vmware.ssdc.util.LMException: portgroup dvs DV. VCDVSInternal-5b323cfb-abbb-4185-95f0-744417f418fc is not found in the inventory after creation.

    Can someone advise on the problem?

    Thank you
    Alex

    This probably means that the vcenter proxy does not work. In the system, manage & monitor, go to the page of cells and see if the vcenter proxy is running on any cell

  • vCloud Director cannot deploy VAPP sysprep to error

    I had errors with WinServer 2003 deployment in our test environment, I didn't know that I had missed the sysprep package. Now, I have installed the package of sysprep by KB Article: 1026313 I downloaded the files on the Microsoft site and they etc. extracted then moved in the vCloud linux host. Now I get a new error:

    Internal server error
    -Cannot start VAPP "vApp_administrator_9."
    -Unable to start virtual machines in the pool of resources '0047960730-InternDevvDC '.
    -NFC HTTP error. Cannot deploy the package from /opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab to 0728198015-WinServer03R2/windows_deployment_package_sysprep.cab./opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab [Cloud_DS3] (Permission denied)

    I had not seen a response on the forums for that so far, if there are please point me in that direction. We are just testing, but I would like to see what the top and work. The extract of the error in the vcloud debug log file is:

    2011-03-24 09:23:48, 431 | ERROR | akimbitask-0 | DRSClusterDeploymentBucket | -DRS deployment failed in the Async section |
    com.vmware.ssdc.util.LMException: NFC HTTP error. Cannot deploy the package to /opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab to 0728198015-WinServer03R2/windows_deployment_package_sysprep.cab [Cloud_DS3].
    at com.vmware.vcloud.val.customization.internal.impl.DeploymentPackage.DeployPackage(DeploymentPackage.java:160)
    at com.vmware.vcloud.val.internal.impl.VC20VirtualServer.pushDeploymentPackage(VC20VirtualServer.java:2679)
    at com.vmware.ssdc.backend.ClusterDeploymentBucket.CustomizeVMs(ClusterDeploymentBucket.java:135)
    at com.vmware.ssdc.backend.DRSClusterDeploymentBucket._AsyncDeploy(DRSClusterDeploymentBucket.java:265)
    to com.vmware.ssdc.backend.DRSClusterDeploymentBucket$ 2.invoke(DRSClusterDeploymentBucket.java:161)
    at com.vmware.ssdc.backend.CAkimbiTask._invokeChildUnsafe(CAkimbiTask.java:119)
    to com.vmware.ssdc.backend.CAkimbiTask.access$ 400 (CAkimbiTask.java:39)
    to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread.innerRun (CAkimbiTask.java:242)
    to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread.access$ 200 (CAkimbiTask.java:168)
    to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread$ 1.run(CAkimbiTask.java:183)
    to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread$ 1.run(CAkimbiTask.java:175)
    at com.vmware.vcloud.common.threadpool.ThreadContextExecutor.execute(ThreadContextExecutor.java:36)
    to com.vmware.ssdc.backend.CAkimbiTask$ InvokeChildThread.run (CAkimbiTask.java:194)
    Due to: java.io.FileNotFoundException: /opt/vmware/cloud-director/guestcustomization/windows_deployment_package_sysprep.cab (Permission denied)
    at java.io.FileInputStream.open (Native Method)
    at java.io.FileInputStream. < init > (FileInputStream.java:106)
    at org.apache.commons.httpclient.methods.FileRequestEntity.writeRequest(FileRequestEntity.java:73)
    at org.apache.commons.httpclient.methods.EntityEnclosingMethod.writeRequestBody(EntityEnclosingMethod.java:499)
    at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2114)
    at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1096)
    at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
    at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
    at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
    at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
    at com.vmware.vcloud.val.nfc.client.impl.HttpNfcClientSession.executeMethod(HttpNfcClientSession.java:200)
    at com.vmware.vcloud.val.nfc.client.impl.HttpNfcClientSession.putFile(HttpNfcClientSession.java:181)
    at com.vmware.vcloud.val.nfc.client.impl.NfcClientFacadeImpl.putFile(NfcClientFacadeImpl.java:61)
    at com.vmware.vcloud.val.customization.internal.impl.DeploymentPackage.DeployPackage(DeploymentPackage.java:158)
    ... 12 more

    Thanks in advance for any help.

    vCD creates a non-root user, vcloud, which is what most of the services is running as. There is a small component that runs as root in order to use the privileged TCP ports (80, 443), but everything else is actually happening in the non-preferred process.

    So you can have a problem with permissions on the sysprep cab file or the directory it is located in (especially if you have changed your umask default RHEL).

    As root:

    CD $VCLOUD_HOME

    chown-r vcloud:vcloud guestcustomization

    chmod 550 guestcustomization

    chmod 550 guestcustomization / *.

    If you need to rebuild the sysprep files in the future, you can a mode of 770 instead, but the vcloud user doesn't have write access to anything in this directory.

    Without restarting the cell is necessary. Just try to customize an another TIME.

  • Cannot install the sample applications manually

    Hello

    I'm having a time difficult installation SDK push sample applications on a remote computer. I try a manual install of Tomcat. The machine runs on Linux Red Hat.

    The error I get is:

    [org.springframework.web.context.ContextLoader.initWebApplicationContext()] - Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registerListeners' defined in class path resource [sample-push-initiator-context.xml]: Invocation of init method failed; nested exception is org.springframework.transaction.CannotCreateTransactionException: Could not open JDBC Connection for transaction; nested exception is org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure

The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)

    It looks like a problem with the JDBC connector, but I do not know how to solve. Among the things that I've done are:

    • Generate the database manually.
    • Fill the PushSDK.properties with the database and JDBC information. Copy this file in each directory WEB-INF/classes of applications examples of
    • Copy the mysql connector jar file in the directory WEB-INF/lib of each application
    • Edit the file app.properties with the information from my BB (app id, base url PGG etc.). Copied in the directory WEB-INF/classes of applications. I did the same thing with suspension - context.xml and app - context.xml
    • Edit conf/server.xml of Tomcat to set the http and https ports and the UTF-8 encoding for the request URL query component. In fact, I have only port 8080 available in the machine and I have configured HTTPS to work.
    • A self-signed certificate and shows its location in the conf/server.xml file. Indicates its location in conf/server.xml
    • Edit bin/catalina.sh to set the JAVA_OPTS UTF-8 encoding

    The initial Tomcat page seem to be working in https://machine_ip:8080.

    But there are errors with the BB apps:

    • https://machine_ip:8080 / sample-push-initiator returns 404
    • https://machine_ip:8080 / pushsdk returns 404
    • https://machine_ip:8080 / debug-Portal opens the Debug Portal, but displays the following message:
    Internal Server Error: 

Sorry, we are unable to properly process your request at this time. Please contact a system administrator to investigate the problem by examining the logs.

    Does anyone have an idea of what's going on? I would be very help appretiate

    Best regards

    Maria

    Hi all!

    Finally, I could solve this problem. MySQL was not allowing the JDBC connection. I have

    delete the line:

    skip-networking

    in MySQL configuration file (/ etc/my.cnf) and now the sample applications seem to work ok.

    I still cannot subscribe to the good customer, but that's another story...

    Kind regards

    Maria

  • Build and deploy the sample application Rssnews

    Hi all

    I'm trying to build and deploy the sample application for my Dev Alpha a. Rssnews.

    I use the 4 SDK beta

    He seems to build ok, but when it tries to install it on the Dev Alpha I get the following error

    Deployment Failed: Info: Sending request: Install and Launch
Info: Action: Install and Launch
Info: Debug native: on
Info: File size: 238114
Info: Installing com.example.bb10samples.data.rssnews.testDev_ata_rssnewsc73a2b56...
Info: Processing 238114 bytes
actual_dname::
actual_id::
actual_version::
result::failure 821 Application-Requires-System: unrecognized system name 'BlackBerry 10'

    I also have an appliance version mismatch error but I belive it can be ignored.

    Thank you very much

    Solved this problem by updating the software Dev Alpha at 10.0.9.1103.

  • 11.1.2.3 EPM environment - cannot create the sample HFM application.

    Hi Experts,

    I have a particular question of HFM on newly built EMP 11.1.2.3 environment - cannot create the sample HFM application.

    HFM: 11.1.2.3.100

    OS: Windows Server 2008 R2 Enterprise Server 64-bit

    I get "Unspecified error", when you create a sample Application using the workspace.

    HFM. ODL.log:

    [2014 02-09 T 21:35:15 - 06:00] [EPMFM] [ERROR: 16] [HFM-80004005] [HFM] [ecid: 004wVzsXFaL8tlVvy0bAD00002OX0000vX] [Org: oracle] [host: auhodtest] [pid: 3472] [tid: 3516] [username:] [file: CHFMCASSecurity.cpp] [line: 546] [version: 11.1.2.3.100.4261] [appName: HsxServer.exe] [devString: the system cannot find the specified path.]
    ] [paramString:] unspecified error

    [2014 02-09 T 21: 35:16 - 06:00] [EPMFM] [ERROR: 16] [HFM-80004005] [HFM] [ecid: 004wVzsXFaL8tlVvy0bAD00002OX0000vX] [Org: oracle] [host: auhodtest] [pid: 3472] [tid: 3516] [username:] [file: CHsxServerImpl.cpp] [line: 4890] [version: 11.1.2.3.100.4261] [appName: HsxServer.exe] [devString: STAT] [paramString: admin@Native Directory;] Unspecified error

    Viewer application event log:

    Log name: Application
    Source: Hyperion Financial Management
    Date: 09/02/2014-15:35:16
    Event ID: 11
    Task category: no
    Level: error
    Keywords: Classic
    User: AD1\! fdminstall_abc
    Computer: auhodtest.oracle.com
    Description:
    Error 11;! fdminstall_abc; 09/02/2014-15:35:16; CHFMCASSecurity.cpp; Line 546; <? XML version = "1.0"? >
    < C'estr > < Ref > {92DCCDF8-B8C1-4F61-B858-BDADFAE401B0} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2147467259 < / Num > < Type > 1 < / Type > < DTime > 09/02/2014-15:35:15 < / DTime > < Svr > auhodtest < / Svr > < file > CHFMCASSecurity.cpp < / file > < line > 546 < / line > < worm > 11.1.2.3.100.4261 < / worm > < ExErr > the system cannot find the path specified.
    < / ExErr > < / CSEC > < / C'estr >

    Could someone please suggest me some tips on this problem of creating application - HFM?

    Thank you

    KK

    Sharing the fix in response to the post here:

    The 'Unknown error' error was due to the fact that underlying configuration of HFM with Foundation was broken and so HFM complained of another error, "the system cannot find the path specified".

    Then as an effort to solve the problem, in a scenario where I had to uninstall, reinstall and re-config component HFM which solved the problem.

    Thank you

    KK

Maybe you are looking for

  • Satellite Pro L300-128 - startup problem

    Hi all I recently bought a Satellite Pro L300-128 GB specification, that has a Celeron M550 running Windows XP and a construction date of the end of June 2008. I have a problem with the switching on of the machine if it has been turned off for a long

  • Unknow device ACPI\TOS620A after installing Win 7 on the Qosmio series F

    Hi all My brother just do clean install of Windows 7 64-bit. He has installed all the drivers of toshiba page, but there is an unknown device (ACPI\TOS620A) Can someone help me? Thank you

  • Default mode of hardware camera button

    Hello Is there a way you can set the hardware camera button to open the camera application in a specific way? I want to start the 4 k instead of the automatic or manual mode, but I can't seem to find the relevant settings. If his is not possible, how

  • How did edit a simple video that I took with my Xperia Z3z from Verizon?

    Hello I did it and I can't for the life of understand me HOW I did. I edited 2 videos - that I belonged the median slow-mo. A I trimmed of superfluous parts of the video. I have these videos on my phone as MP4s, so I know I'm not nuts. I remember jug

  • VLAN in point to point T1

    OK, here is what I am wanting to try: PC6248 > Cisco 2800 router Cisco 2800 router > PC6224 I have 4 VLANS which would go through this link: 8 100 102 and 103. And that's how I think I will need to configure the VLAN: 6248: switchport mode trunk swit