cannot detect the software on my i Pod not pick

Similar Questions

• Cannot download the software due to a network problem

  Hi all I'm on MacBook Pro (retina, 15 inches, end of 2013).
  I try to install Windows 10 with the version downloaded from the Microsoft Web site.
  I finished uploaded and am trying to use Boot Camp to install Windows 10.
  However, I faced a question and it is that he "cannot download the software due to a network problem".
  I'm stuck here for an hour and I can't find a solution.
  I did all right until now by the following online tutorial but it prevents me to continue.
  Any help will be appreciated.
  Thank you.

  It is a very common problem. To fix this, first try to start your Mac in safe mode by following these steps-> safe mode try if your Mac does not commissioning - Apple Support

  Then, restart your Mac as usual and try to download the Windows support software again.

• iPhone 5 c cannot detect the network.

  Since the last 9.2.1 update my iPhone 5 c cannot detect the network.  Constantly 'finding '.  It took to the local repair shop and he told me the imei is missing and only Apple can help.  Any ideas, thank you.

  A missing IMEI is a fatal error which cannot be set. This is usually the result of the attempt to jailbreak or hack the phone unlock illegally, but not exclusively.

  Where, exactly, do you have the phone? It was jailbroken? Never 'unlocked' by one person other than the carrier, so it was initially locked?

• MAX cannot detect the TPC-2106 t

  don't know if this is the right place to post this but I had to ask the question

  I t TPC-2106 touch panel and want MAX detec there, but it will not for any reason any

  I have the touch panel module and the touch screen is correctly connected to the network that my computer as well

  MAX can detect my compactrio, but it cannot detect the touch screen...

  Someone has an idea?

  Thank you

  Browse the following documents and after if you have other questions.

  LabVIEW Touch Panel Module Getting Started Guide for LabVIEW

  Getting started with National Instruments Touch Panel computers using LabVIEW

• win xp prof, I forgot the password, cannot run the software, web access, etc., help

  I forgot my password "Sign up" (after the 'user name' field Director) and cannot open the software; so I can't use any utility to reset or change the password to start windows xp professional. Can anyone help?

  I forgot my password "Sign up" (after the 'user name' field Director) and cannot open the software; so I can't use any utility to reset or change the password to start windows xp professional. Can anyone help?

  Not here.  Google can.  You forgot the administrator password?

• Cannot find the software for my ms wireless laser mouse 8000

  Cannot find the software for my ms wireless laser mouse 8000

  I don't know why you posted this in the forum Office XP, so I moved it to Windows XP 'Hardware and drivers' forum.

  You can find the drivers for the Wireless Laser Mouse 8000 here: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-8000

• computer cannot detect the scanner or camera

  When I plug in my digital camera Canon for my xp, then turn it on, I hear a small beep, then nothing. When I go into the Panel, printers and other equipment, scanners and cameras, I see 2 points. 1 is, WIA Canon MX310 SER. The 2nd one is Canon PowerShot SD1300IS. I then click on the Canon PowerShot SD1300IS and then get pictures, but nothing happens. The cameras screen display turns off, but that's all. It seems to be connected to the computer, but not to download pictures.

  When I keep trying I sometimes get an error message, the computer cannot detect the scanner or camera.

  How can I solve this problem and download my photos?

  Thank you Tim

  Hey volunteer J;

  Thanks for the help, but it did not help.

  I found the answer on page 2 of microsoft answers, xp, images and videos.

  6 questions down, how to re install microsoft scanner and Camera Wizard.

  It turns out that some tech volunteer known as J (is it you?} came across the solution to my problem on this site:http://www.veiled-chameleon.com/weblog/archives/000231.html )

  I have used PC Cleaner on this xp, and I think he may have disabled some of the registry keys. For me, I had to start my pitcher of DCOM Server, RPC, Remote procedure Call Locator process and put them on automatic. Once I rebooted, everything works great.

  I'm so happy that tech Volunteer J, done everything search last December. I bet it helped a ton out of veterans with our cameras. How did he find veiled Chameleon? Wow he must be smart enough.

  Thank you for volunteering j. (is it you?)

  Thank you Tim

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

  I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

  Please see the links below.

  • Invalid serial number error
  • Error "serial number is not valid for this product". Creative Suite

  Hope this will help you.

  Kind regards

  Hervé Khare

• installation stops with a "cannot detect the last level cache.

  ESXi 5.0 installation process stops with a message "cannot detect the last level cache.

  VMware ESXi 5.0.0 [Releasebuild-469512 x86_64]
  Cannot detect the last level cache
  CR0 = 80010039 cr2 = 0 x 0 = 0x3e7000 cr4 = 0 x 2038 cr3
  PCPU0:2048 / bootstrap
  PCPU 0: S
  Beginning of the code: uptime VMK 0 x 418013200000: 0:00:00:00.890
  6 lines of < no symbol > errors
  Basic FS = 0 x 0 gs = 0 x 418040000000 kg = 0 x 0
  No space on disk for the dump data.
  Debugger waiting...

  switching LSI based SAS controller to port sata3 onboard has not changed a thing

  Oh, here the specifications:
  Processor Intel i5 2500
  16 GB OF RAM
  ASUS P8H67-M Board

  any ideas?

  Hi all

  I had the same problem after turning on in BIOS "Max CPUID Value Limit" to activate option.

  Disabling above option help me to install vmware esxi 5.0

  Anatoliy

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The software you are installing has not passed windows logo testing to verify that it is compatible with windows xp

  When installing Football Manager 2011, when its almost finished, he said:

  "The software you are installing is not windows logo testing to verify that it is compatible with windows XP. Please contact your system administrator.
  I guess its because I have a really old laptop, but if someone could confirm this or help it would be greatly appreciated!
  Thanks in advance

  Hello

  Not his because that the game developer has not presented the program of Microsoft
  Logo program that charges a fee to certify programs. It may very well be if he is a large
  producer of games. Also check with the developer of this game for more information.

  I hope this helps.

• HP Photosmart B110a - "the software for this device is not installed" when scanning on OSX 10.9

  I hope someone can help with this! I am tring to use my scanner without success with the ' software for this device is not installed.

  Measures taken so far

  On a new copy of the Mavericks with installed updates (10.9.2) I added my wireless printer successfully and I can print my documents successfully. My Mac has recognized that this printer includes a scanner and the scanner appears in the preview, capture of the Image etc.

  Problem

   

  
  During an attempt of a scan in any of Mac programs a message that says "the software for this printer is currently unavailable. Contact the manufacturer of the printer to the latest software. "is displayed. There seems to be no software or drivers on the HP site for my scanning equipment. I simply said that it is all built into OSX. I checked the printer on Apple's site and it is listed as supported for printing and scanning. I hope someone can help!

  Finally, I snapped this.

  When you add the printer it seems that OSX AirPrint as the default printer driver.

  To solve this problem, I completely deleted the printer, the printer readded but changed AirPrint for my specific printer driver and all my scanning functions are now available.

  Thanks for all your support!

• I subscribe to creative cloud for more than a year. I heard that after this year, I still want to be able to use the software. However, I would not be able to update until I subscribed again? What is its operation or? Thank you very much

  I subscribe to creative cloud for more than a year. I heard that after this year, I still want to be able to use the software. However, I would not be able to update until I subscribed again? What is its operation or? Thanks a lot now have a load of files I can not settle before I send them to the clients until I have shut down my business. Can anyone throw any light on the matter please?

  If you do not renew your subscription, you will have 30 days to use the programs as tests... and then they stop working

  A subscription is like rent a car... stop paying, and you stop driving

• Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  My os is windows 7.  elements of 12 worked fine for several months and then save for web stopped working