Cannot display QML in Design Mode

Cannot display QML button is not active in Design view

Advertisement

Hey,.

I think the problem is your driver VGA is not installed or perhaps your PC not support preview live view QML

I had this problem once before and after I installed my VGA driver correctly seen him live QML his works very well

Tags: BlackBerry Developers

Similar Questions

  • Dreamweaver problem: cannot go back into Design mode

    Dreamweaver cannot go back in Design mode.

    Condition... Type or paste a line of text. Then press SHIFT + ENTER. If you are in split view, you can see that Dreamweaver has inserted the Unix < br > Break. Then type or paste a character or a word in Design mode and enter a space. Now, try to go back and delete the character that you have just typed or pasted. You cannot delete the last character of the last word after the break, or uniqueness, which was followed by a space. This condition exists in Dreamweaver CC since the launch of Dreamweaver CM³, about a year ago.

    Comments... If you are in split mode, or if you change the Code view, you can see that last space has been removed, and curiously, the cursor is located left of the < br > Break. On the right side of the break, is the content of the text that you want to revert back to remove. However, in design mode, the cursor is to the right of the text to be deleted! Press the BACKSPACE in design mode and the cursor does not move in Code view. View code change and you have to manually move the cursor to the right of the text to remove, and then press BACKSPACE twice: first press empty due to lack of buffer that blocked the action correct backspace (I think, but ideas here so please share with Jack in charge); second button to start the delete text action.

    Support to date: just off the phone with care: "Yes, we know this problem for over a year and there are thousands of people like you who have this problem. This issue has been brought to our engineers. "You just wait dethrone"

    Considerations... Because the back is a parameter of Unix Foundation, and because the functions of Fireworks with millions of active system per second setting hooks, it is logical to assume that Dreamweaver has millions of potential destructive potetially system launch every second that the application is open. At launch, Windows 8.0 and Dreamweaver have been hell has extended to the point of boiling. All the time that the independent team Acrobat (not Adobe) got their product set beginning July, 2013 there is a hope for Dreamweaver. As you can see, this hope is baseless. Adobe has failed to get basic Unix keyboard functionality for its Dreamweaver product. Business must be booming for dozens of requests for the creation of web previously backroom. Google that. Windows 8.1 provides a much greater security for the system during the installation of the moribund Dreamweaver product. I'm in favor notepad.exe personally for the most part, the efforts of code. Yet the great potential of OS perspective triggered by Dreamweaver is impressive. Thousands of users are no doubt what we see for the last year of hope is not the deathrows of a great creation officer, full potential.

    Purpose of this post:... Hope that Adobe keeps this display Discussion (request for ideas) is active until the problem is resolved. It is comforting to know that the issue is raised. Hotline again suggested just now, I post this in the Forums.

    Query... There may be a preferences that can solve the problem of back? Maybe someone has an idea personal (s)?

    OK, the update is now available.

    What's new in Dreamweaver 13.2: http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-13-2.ht ml

    It is the version that I tried to reproduce the problem and could not.

  • Why my fonts displayed incorrectly in design mode?

    For on the last 12 hours, without Pro source is displayed correctly in Design view-, it is perform all my formatting and layout.  The same problem occurs on multiple sites.  In the preview (preview of Muse and browser), the site exports always correctly and the font rendered properly.  What is going on?

    Hello

    Could you please check similar topics

    Fonts don't display correctly in Muse designmode

    Source without Pro does not display "Design".

  • Cannot be modified in Design mode (try to change the site created in a previous version of DW)

    I use PS CS5.

    When you try to change a Web site made in a previous version of DW I can't select in the edit box or model via the design mode (on any PC computer, I met this problem for a few years now on different computers). Therefore, I have to change via Code.

    When I try to place my cursor within the editable region appears a circle with a line through it diagnal. Sometimes I can get my cursor in there, but I can't control its placement with my mouse. I have to use the keyboard to move the cursor to where I want to. Otherwise, I can only make changes via the Code.

    It is very annoying and slows down terribly my workflow.

    ID can be used only 1 time per page.  You have 2 instances of

    Only is allowed.

    The Name and ID values must not contain spaces.  Unique token to say a single word.

    You can ignore rolling MM_ code errors.  This code will not validate html because it is not HTML.  This is JavaScript.  The solution is to put it inside an external .js file or encapsulate the code inside CDATA tags.

    You have also some CSS errors:

    carolinaweddingvideographer.com%2f http://Jigsaw.w3.org/css-validator/Validator?Profile=CSS21&Warning=0&URI=http%3A%2F%2Fwww.

    In your main.css, remove overflow: auto , the heightand the position: relative.  Height is always determined by the content.  Overflow: auto is the default.  And positioning is not necessary in this provision.

    #mainContent {}

    Width: 750px;

    float: left;

    margin-left: 10px;

    background-color: #E0ECF5;

    }

    #sidebar {}

    padding: 0px;

    Width: 155px;

    border-left: 5px double #355 CA 7;

    border-top: 5px double #355 CA 7;

    float: right;

    top of the margin: 5px;

    }

    Nancy O.

  • Problem with display in the design mode User Interface

    Hello! I use the model #2 from the Adobe Developer Connection found here: http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

    When I add more than 10 navigation buttons they begin to appear to the right of the first 10 in design mode.

    There is a screenshot showing the problem here: http://www.sallyaverill.com/dw_grab.html you will see in code view, it is simply a list that it explodes into design mode, pushing the content to the right and pushing an accordion Spry Panel.

    She looks like and acts very well in mode live view and in a browser, locally and remotely, but I'd like to see it in design mode. What is the cause? Please let me know if there are more necessary information. CS4, WindowsXP

    Many thanks - Sal

    Text dims to the overview is because you called a: hover, but not li: hover.

    Instead of

    .leftnavigation a: visited {
    color: # 66;
    }
    .leftnavigation a: hover {
    color: #ffffff;
    background-image: url(images/nav_down.jpg);
    }

    follow these steps:

    . LeftNavigation li: visited {info style here}

    and

    . LeftNavigation Li: hover {info style here}

    Make sure that keep them in that order! You want your Pseudo-classes to come in this order:

    Li: link link

    Visited li: visited

    Hover li: hover

    Active li: active

    Again, it won't be your entire list change (menu point) color, so you could also add funds... at the present time, you apply a style text only (text styles of color; background-color styles menu item)

    Beth

  • Why not display images in design mode?

    "Why don't images are not displayed in Design view.

    Where's the support?

    dreamweaver-cc2015-image-issue.jpg

    I'm sorry, but the wrong answer: https://forums.adobe.com/thread/1541251

    Hello

    Also, check if the "external display file" is checked under the Billboard. as the CBC is an external link.

    Concerning

    Vivek

  • Table display / extensible in design mode

    Hello

    I just upgraded to CS6 and one thing through me and I wonther so it can be fixed.

    I use a table that has a game with and when I open in CS 5 it works as I expect him and fills it with images up to the with the strength to change line and continues like that.

    The CS6 itself relied just on the table on the side and I totally lose the design view of the page.

    This just baffels me why she is different. Is there a setting or a button hidden for this?

    On this picture you can se the difference between the two

    : Edit note is that it works in the browser at once which is no problem.

    http://www.hungryhippo.se/help.jpg

    Remove the attribute of size of table in line 51.

    Since there is absolutely no way, this table can be 299 pixels maximum, DW might have a problem with that.

    Actually, one thing I've noticed with DW is any time you try to control parts of table with css AND attributes of table standard, things go south. Since you're using css and you already have a style sheet, try to use css only to control things like height, width and so forth.

  • editable acts cannot be modified in design mode

    Anyone have any ideas on what I should check for debug this problem. Its really annoying to have to update my pages in code view. All of my pages validate to XHTML 1.0 transitional and my CSS valid but I can't change the "content" of the page through fashion design section.

    s elon google search, this is a bug in dreamweaver.

    Here's a solution that will do the job of design view, but your css files may remain the same:

    Create a new file with this code css:
    * {overflow: visible! important ;}}

    create a link of time style sheet design to the new css file. (Text--> Styles CSS--> design time)

    Your design view should allow editable regions be used as usual.

  • Program cannot display web page on start up - replacements all & freeze safe mode

    Hi, on my pc startup (Vista) after the initial office, he's going on a blank white page with information i. Message is "the program cannot display Web page". If I try to start the task manager that flashes briefly upward, then the white screen resumes. If I try again, I get a black screen. While the screen is in place I can't do anything else or run programs at startup upward until this screen.

    If I boot in safe mode, the top of desktop and icons here, but I can't do anything else - even closed. I have to press the power button until the PC is emerging.

    I don't know how to do BACK guests or find how to work around this problem. I tried several searches but all the answers are in line to remove this or that or a scanner. I don't have access to all programs do. Even the answers on this site so far await you to be able to run other programs of some sort. I'll have to write this on PC of the wife. Any help / suggestions gratefully received.

    Thank you, Nick

    You can use Windows Defender in offline mode, use a PC secure and download and use:

    http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

    And then use removable media or a CD/DVD and create the startup and startup disk in your infected PC and then run a full system scan. You have no need to start your system in this way.

  • My page display mode live view, but not in design mode.

    In DW CC 2014 and 2015 CC DW, my page display mode live view, but not in design mode. When I switch to Design view, I see only the grid and nothing else. ????

    DW, especially the latest version, requires a clean code and valid for many functions to work correctly. Chances are, there are a few code errors in your HTML view Design of the data warehouse can not handle, but browsers and the Live View can.

    Run the validator at http://validator.w3.org/nu for a list of errors and correct all found your page.

    If you have a clean and valid code, but the problem persists, post a link to your current page, or all of the code and css here in the forum (don't use e-mail, it will not come through) so we can take a look at what's going on.

  • Design mode display problem

    Hello

    Working with happiness in fashion Design with 10 HR and a moment to another, the design view has changed. The display of the fonts changed to a truncated style and return to the line disappeared.

    I tried restarting and then put it back and no chance to get rid of the issue.

    The output is very well and as planned, so I assume that is not the CSS. That I have not edited since eons anyway really should not therefore it anyway.

    This is the case on all my projects help - each with a different CSS - so it may not be the css unless HR did a comprehensive kind of strange changes behind the scenes without my knowledge.

    Any thoughts on how to get the design mode to view normally would be much appreciated,

    Thank you

    Tannis

    Check the zoom setting. It used to be on the toolbar near the police and style information. It may be more than 100% (used to be a problem with older versions and I did not have a more recent version to check if it's been fixed).

  • Cannot edit or view the document in design mode

    Hi, I have a html doc, I pasted in dreamweaver. It makes fine in browsers and in the 'live' view in dreamweaver, but everything I see in design mode is highlighted yellow < table > tag. I can't view or edit the document. Is there a problem with the html code of the leaves of style or code? I deleted this code and it has not yet displayed in design mode:

    < style type = "text/css" media = "screen" >

    body p {margin: 0; padding: 0; margin-bottom: 0; - webkit-text-size-adjust: no; - ms-text-size-adjust: none ;} img {line-height: 100%, outline: none; text-decoration: none; - ms-interpolation-mode: bicubic ;} an img {border: none ;} #backgroundTable {margin: 0; padding: 0; width: 100%! important ;}, a: link {color: #EB732E; text-decoration: underline;}.}}}} ExternalClass {display: block! important; width: 100%;}. ExternalClass. ExternalClass p. ExternalClass merged. ExternalClass font. ExternalClass td. ExternalClass div {line-height: 100% ;} table td {border-collapse: collapse ;} sup {position: relative; top: 4px; line-height: 7px! important; police-size: 11px! important ;} a [href ^ = "as"], a [href ^ = "sms"] {text-decoration: none; color: #cfcfcf; / * set the color of the text * / pointer-events: none; cursor: default ;} .mobile_link one [href ^ 'such' =], .mobile_link a [href ^ = "sms"] {text-decoration: by default; color: #cfcfcf! important; / * set the color of the links * / pointer-events}}}}} : auto; cursor: default ;} .no - detect a {text-decoration: none; color: #cfcfcf; / * set the color of the text * / pointer-events: auto; cursor: default ;}.} Hide {display: no! important ;} span {color: inherit; border-bottom: none ;} span: hover {background-color: transparent;}.}} ExternalClass img [class ^ = Emoji] {width: 12px! important; height: 12px! important; display: inline! important;}. ExternalClass sup img [class ^ = Emoji] {width: 10px! important; height: 10px! important; vertical-align: super; display: inline! important ;}}

    < / style >

    Any help much appreciated.

    Thank you

    SSL

    Tools for validation of code below & difficulty errors reported.

    Code Validation tools

    ------------------------------------

    CSS - http://jigsaw.w3.org/css-validator/

    HTML - http://validator.w3.org/

    In addition, ensure that your paths to files (CSS, Scripts and images) are all correct and pointing to your site folder.

    Nancy O.

  • PHP icon displays only not in design mode

    I just ordered Studio 8 and currently working on the demo version of Dreamweaver 8. I had been using FrontPage for many years and I finally reached its limits. Start from scratch and one of my old FrontPage web pages do not import not, I create new pages. I'm coding in PHP and noticed this cool php icon that shows in my opinion design hence is all my php code. This FrontPage could ever do. I have a table which made several calls "include". I am able to add 2 lines of code that generates two php icons in my mode of creation. When I try to add a 3rd line of php code, it deletes all the icons of nice php in design mode. For the rest of the document, if I add more code, then the icons will not appear. PHP is in code view, but shows Design view is no longer the icon of php. Anyone have any ideas on how to make them appear permanently? This is one of the many features of Dreamweaver that pushed me to buy it.

    The option of not checked worked. As soon as I turned off the "display content includes" all my php icons appeared in my mode of creation. Thanks for all your help.

  • Preview mode displays a different page than the design mode

    When I edit my page in design mode in Muse CC, the page is 700px about to long. When I saw this page within the Muse, he adds about 300px to the bottom of the page. There is no box of text or other content that is causing the shift? Why my Web pages appear different in the preview in my design panel Panel?

    Sound as if you want to disable "sticky footer" in the page properties dialog box. This setting makes the page at least as large as the browser window.

  • Design mode - cannot select text, only the Divs

    This is a page I have did not build, and I hope that I can describe it correctly. Here are the published page-

    www.WheelTime.com

    I'm in CS4 and there are two things happening when you try to change in design view. The first is that I can't select text content. Clicking to select such content, for example a line of text or a Word, selects and highlights the container div any and all content to the breast in a big piece. Why is DW not let me choose the actual content? It's the first time I met enver this problem.

    It is the same for all ontainers div on the page. But a related problem may have to do with this content area. In design mode, there is a fixed height, so not only can I not select content, but I do not see everything. It of OK in the browser, develops as it should. I have looked at all the properties of any place and don't see any height attribute anywhere, particularly those that define this content area.

    A you ask - this content area is warpped in a 'main content' div, with a class applied. But this div has no corresponding entry or properties in the style sheet. I can see where a div can be used has no specific properies of its own, but it's OK, not at all mentioned in the style sheet? And this can affect what happens in Design view editing?

    So, I guess that the question is what governs this inability to change in Design view?  Thank you in advance!

    Have you tried to double click on the content?

    I do not know what causes this exactly, but I downloaded your page and it ran into my DWCS4. Until I double click on the content of the div, it does the same thing. Allowed me to select without problem from there.

    It may have something to do with the content that is wrapped in the tags within each

    .

    On your other question, your

    is affected by the class .container in your style.css instead of an id #main file - container.

    EDIT: The HTML id Type

    used to identify the elements for many purposes, not just css. There is no problem with giving an element an id simply for organization purposes, although usually they are used as targets for javascripts, css, or php script ends.

Maybe you are looking for

  • How to restore missing album art

    For some reason, I lost most of my albums work.  Some are still there.  I can restore the work leaving iTunes scan for media, but then I lose by organization Playlist.  I can't live without the missing illustrations, but it would be nice to have this

  • How to open pdd files?

    On windows 7, have a number of pictures of file which are files DP that I can't open.  Have I not a windows program to open? Thank you

  • Cisco ezvpn ASAs cannot ping each other inside interfaces

    I have a set ezvpn in place with a 5506 (position B) client-side and a 5520 (location A) server-side. I have successfully connected vpn, and traffic flows. My problem is that I can't SSH in the location b. investigate this more than I can not ping is

  • Need help to create the logo graphic text saved as a PDF. (Beginner)

    I use Photoshop CC 2015.I want to create a logo using the part of a chart in a PDF (no copyright issues).The chart in PDF document looks like Word of the text with a rectangular colored background. I think the word was created with the help of a poli

  • Getting the following message when you try to install Illustrator 2015: Exit Code 184

    Exit code: 184-------------------------------------- Summary ---------------------------------------fatal error 2, 2 error (s), 1 warning (s)FATAL: Error (Code = 184) the "MoveDirectoryCommand" command for the package: "AdobeIllustrator19-Core", vers