Cannot download the update of security for Windows Vista KB3168965
I seem to have a problem downloading update security for Windows Vista KB3168965. Windows Update crashes when it tries to download, and when I try to download it manually from the Microsoft Web site, nothing happens. Anyone know what goes wrong?
To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-update-just-spins-and-spins-seemingly/0b7fc1fb-6425-4429-8987-eb81323331ec
Tags: Windows
Similar Questions
-
Cannot complete the update of security for Windows Vista (KB2961072)
I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072. I also ran system update readiness tool. No luck. Anyone have any ideas on how to solve this problem?
I had a very very long list of updates from several years ago, now I see only about 60. OS says I have SP2 yet, but it does not look like it. What happened to the hundreds of updates? I have updates of the .net Framework and part of last week.
-
Cannot install the update of security for Windows XP (KB982665)
Original title: security update/install failures
Siena is a re-post using the appropriate format: when I check for Microsoft updates I hit the express tab and most of the time I get the message 'install (s)' didn't like in whne I tried to download and install the 'a security update for Windows XP (KB982665)." It is the rule, not the exception. What should I do, please? Thank you!
Hi ubancosr,
Try to download and install the update manually and check.
Update security for Windows XP (KB982665)
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot install the update of security for Windows XP (KB2686509)
original title: why my XP pro does not accept the following security update? Update security for Windows XP (KB2686509)
Hello
I'm not really very good which is why I chose to use automatic updates. I recently got 'updates are ready for your computer' and when I start to download it stops pretty quickly and said:
The following updates have not been installed.
Update security for Windows XP (KB2686509)
Is there a wat to fix this problem without needing to know the registrys etc.
Thank you
Mick
See my post on the third page of this topic which contains detailed instructions for anyone with this problem. Go to the bottom of this page and click Next until you get to page three.
Thanks for the update Mick. You should be able to double-click the file to open it in the command prompt. I did not write the script, so I can't tell you why you were unable to launch it by double clicking. Right click and choose to run it in command line will still work.
@ Icom756pro I do not work for Microsoft, then you would be best suited to forward your complaint directly to them. I understand your frustration, however. I can only recommend that you try the script that I've linked to page 1 of this topic. If this does not resolve the problem then simply hide the update. You should not be prompted to install later.
-
Error code 8007371B when installing the update of security for Windows Vista (KB978886)
Update for Windows Vista (KB978886) security fails to install on my computer and I get this error code: 8007371B.
I use an Acer with Windows Vista Home Edition SP 2.
Can someone help me?
Thanks in advance
Title of contempt, but other things that you can try are:
http://support.Microsoft.com/kb/947366#resolution3
http://support.Microsoft.com/kb/947366#resolution4
Have you tried the standalone version of the software update and run the tool. Now it's time to check if something is the cause of the problem for example security applications or other programs.
TaurArian [MVP] 2005-2011 - Update Services
-
No internet connection after installing the update of security for Windows Vista
Security updates for Windows Vista released October 13, 2009 and November 10, 2009 still an Internet connection limited Connectivity/No. Did not help uninstall updates. To do the system restore to solve the problem. Why is this?
drusecord,
First thing is to update your network drivers for your system. Then see if after the update of safety, you have a problem. If you do, I would do the following:Then if there are updates that you already have, but are always available to consult this information:
Troubleshooting Windows Update: offered on several occasions to update
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
My computer will not install the update of security for Windows Vista (KB2688338)
The update starts normally say "create a restore point. Then he said: "some updates were not installed.
I get the error code is:Code: 80070002Here's a good link for the specific error code you get:
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002
-
I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).
I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.
Ran the update without any firewall or AV program running and still received the same error.
AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.
Hi a93svtf,
This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.
Step 1: Run the fixit available in the article below
You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336
Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Now, try to install the update
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
The system is unable to complete the update of security for Windows XP (KB2661637).
Original title: update security for Windows XP (KB2661637)
The system is unable to complete the update of security for Windows XP (KB2661637). How can I get my system to accept the update?
Hi Joseph,.
You receive messages or error codes?
You can reset the default Windows Update components and check if you can install the update.
How to reset the Windows Update components?
You can also try to download the standalone update package and check.
-
my computer will not install the update of security for Windows XP (KB2481109)
Moderator before go Note: IE8.
-----my computer will not install the update of security for Windows XP (KB2481109) can you help me.
Hello
(a) don't you try to install the update manually?
(b) you get any error message?
(c) don't you make changes to the computer until the problem occurred?
(d) what anti-virus software is installed on your computer?
I suggest you try the steps below and check if it helps
Method 1:
If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs
Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.
Method 2:
I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:
http://support.Microsoft.com/kb/310353
Make sure that return you the computer to a normal startup mode once it's done.
Additional information: make reference in the link below:
http://support.Microsoft.com/kb/2481109
Hope this information is useful.
-
I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173).
According to Microsoft Update, the error code is 0 x 643.
I tried to install the update during a clean boot without result.
Here is the log: https://skydrive.live.com/redir?resid=DDC6388AB2460543! 117
Hello
Method 1
I suggest you to run the fixit from the following link:The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2
I would say you can do clean boot and install the update.How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Note: Make sure that you reset the computer back to normal once the diagnosis is complete.
Method 3
I suggest you to download and install the update from the Download Center.RTM of Microsoft Visual C++ 2010 redistributable MFC security update
http://www.Microsoft.com/en-US/Download/details.aspx?ID=21576Method 4
I suggest you try the steps from the following link:Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost. -
Help! I have Windows XP Edition version 2002 SP3 family. I tried to install the update of security for weeks and get the following message:
Cannot install get a security update for Windows XP (KB2476490) error Code: 0 x 80070008. It is said it is downloaded on my PC but have been unable to find it or fix it. Any help would be really appreciated.
Unable to upgrade operating system at this time... no money. Thank you!
Hello
I suggest you try the steps from the link below and check if it helps.
http://support.Microsoft.com/kb/836941
Hope this information is useful.
-
Keep getting repeated prompt to download the update of security for Net framework 4
Original title: update for Net framework security 4.
I keep getting invited to download a update of security for Net framework 4. When I check, I find that this update has been successfully installed. What is the problem and how can I resolve this conflict... D.P. Broomfield
Hello D.P. Broomfield,.
You can read the Microsoft article below and try the steps to solve the problem of update installed successfully offered again in Windows updates.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339
You can also download the stand-alone update package and try to install it:
Hope this information is useful.
-
Automatic update does not install the update of security for Windows XP (KB2419632)
KB2419632 will not install on my computer. I tried to install it several times without success. I get a 'General failure to install' error without characteristics.
I downloaded the update (WindowsXP-KB2419632 - x 86 - ENU.exe) and tried to install it manually, but it fails when he tries to save the file "" MSADO15. "." DLL"in the folder"C:\Program Files\Common Files\System\ADO".
The dialog box that opens is "Copy error" and said "Setup cannot copy the file msado15.dll. Ensure that the location specified below is correct, or change it and insert 'Windows XP Sytem Files' in the drive you specify. »
The file MSADO15. DLL exists in the directory above.
In reviewing other positions, he requested information on the following security software:
1 security Suite: McAfee Total Protection 2010 (current subscription)
2. what McAfee, Norton never
3. preliminary: do not remember, have always used McAfee.NOTE: I've never had a problem with an update of Windows until one.
How should I proceed?
See the section "How to get help" of http://support.microsoft.com/kb/2419632
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
-
When I connect windows as Aministrator, error massage "service user profile Service has no logon. User profile cannot loaded bo"appear. I'm only allow Windows to logon as a Standard user. Started as a Aminstrator I need to restore my computer (only in safe mode) at a time before installing the KB2286198 update. How to open a windows 7 mormally Admin user session after installing the update of security KB2286198?
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
-
I did the updates using screen sharing, now, screen sharing will not work. 2 servers, both with the same problems. I can connect to other computers on the network, not only servers.
-
By default new FF w/Google is great and thank you too much. Prefer to remove the new button at the bottom of the page links and have more empty space on the page where the new links are currently. The links are already very well for use at the top of
-
static reference with the global variable
Hi, I used a static reference to a Subvi where I change a global variable before (3-4 years ago) and do not remember how I did it. It was something like these attachments, but now I'm using LabView 2013 instead of LV 8.6. The change in the overall op
-
Find the instrument Driver won't find 6070E vi
I have trying to find vi that have been written for card PXI-6070E. Some fundamental, as output 1 V out of the DAC1OUT. When I use "Find her Instrument Driver"... and interrogate National Instrument (company) and 6070E (additional keywords) I get no
-
Transfer pictures to the computer, back to the camera card
I would like to transfer photos, Windows Photo Gallery, or my folder of images, from my computer, on a camera card. I am currently operating with Vista. Is this possible? If so, how?