Cannot drag icon screen customize toolbar on the Tablet Dell coming 8 Pro.

Similar Questions

• I'm trying to get the bookmark icon in my toolbar to the right of the icon of the House. I right click on the toolbar, and then customize the icon is displayed in the toolbar. When I close the popup on the toolbar icon in my toolbar disappears.

  I'm trying to get the bookmark icon in my toolbar to the right of the icon of the House. Then, right-click on the toolbar and then click Customize the icon in the toolbar. As soon as I close the pop of toolbar Customize the icon on my toolbar disappears. How can I get the Favorites icon to stay on my toolbar to the right of the icon of the House?

  Two things can cause the Bookmarks button to "disappear" from the Navigation bar when the customization mode is closed.

  1. the Menu bar - with File, Edit, View, etc. - shows.
  
  Since you have checked the answer first of cor-el solve your problem, I have not exposed on this point.

  2. the bookmarks toolbar shows, and this button is this toolbar.

  Is the Menu bar showing or not?
  
  Have you tried the reset bar of tools and commands that I mentioned?

• Rotation Miracast blocking and screen Dell coming 8 Pro

  ... then... After installing all of the updates, I am always frustrated by the meeting place 8 pro using miracast. I can go up to view without problem, however once I got it on the second screen only, I can launch and use the desktop in landscape mode, however, when I run (or in this case to install Skype desktop) the screen is automatically rotated in portrait mode (I put in rotation to "lock"). It is VERY annoying, I have to unplug the 2nd screen, just to be able to navigate through the screen as everything is now 'out' to portrait again! (I tried to make profiles to block in landscape mode, without result, the Tablet just begins to turn in portrait mode!...) Which, if all parameters, will keep the display in a mode "locked"? Sometimes I can turn the tablet in portrait mode, landscape to get my 2nd screen to show again.

  I have no love of Dell support because they seem perplexed by their own device. Is miracast a 'standard '? I have NO problem with android devices, like I can "lock" the display in portrait mode or landscape. I notice Dell coming 8 Pro is not a certified device miracast (I think I saw this on the site of alliance miracast?) Is this a problem with this device (such as the active stylus fiasco?) All I wanted was to have my tablet in landscape mode, with a keyboard and a mouse (no problem) and "cast" fashion LANDSCAPE IN and lock it!

  Is there ANYWHERE for a guide to not clear and concise for not having the scenario of Tablet/miracast above work? I been hit n miss here!

  Thanks in advance!

  Update: finally have a stable connection... BUT. DON'T let NOT the tablet to go to "sleep", or whatever he decided to do, the connection is lost, and only a reboot will find/reset the wireless adapter.  Looks like this was not thought good/tested/implemented?... Actually got extend to work... as long as this dosent puppy tries to return to auto rotation...

  Your "Update" did not appear until after the page refreshes when I posted my 1st reply...

  The connection to the time-out of PTV wiil (drop) after some time, if the PC interrupts the communication... IMO, it's normal and my connection WiDi of a laptop which is also. What not 'normal' is to have to re-boot to restore.

• How to transfer pictures from the desktop Dell to MacBook Pro Photos

  How to transfer pictures from the desktop Dell to MacBook Pro Photos

  Writing an effective question of communities of Apple Support

  On the local network.

  External hard drive.

  The thumb drive.

  Cloud storage.

  Messaging.

  etc.

• Cannot connect large hard drives to Dell coming 8 Pro

  I bought a Dell coming 8 Pro yesterday and have several questions.   I'll post the others separately.

  I tried to connect several large (500 GB, 1 TB) hard drives in the device, but it does not recognize them.   I tried this with at least 3 of them so far.  It does not seem to recognize young readers usb very well.    Does anyone else have this problem?  Workaround solutions?   Seems to limit the usefulness of a device with a small disc hard (I got the 64 GB version).

  Hey, Buzz,

  Your biggest hard disks have ports to connect an external power supply? The venue Pro 8 is a small portable device with OTG, or supported USB ' On the Go ' as some phones. When used with an OTG cable, it can act as a USB host for simple devices of power like maps flash, mouse and keyboards, but not devices with rotating mass like hard drives large (or perhaps old) and fancy as USB vacuum keyboard and fan items. If your hard drives just to make a clicking sound when it is attached, it is likely that they do not receive enough power to spin to the top. This is normal for OTG devices. And if you don't have a power supply for the readers, you could try a self-powered USB hub that can provide more power to readers and still allows the V8P communicate as host.

• I want to add zoom in/out icon on my toolbar, but the icon is not in my Inbox 'Customize toolbar' icons

  Re customization of toolbars, on this web page (http://www.mozilla.org/en-US/firefox/customize/) of your Firefox help beside where it says "Adapt your interface" is a picture of the box "customize toolbars" compensation showing an item to zoom in and out to drag it onto the toolbar, I want to do, but the icon does not appear on my box "customize toolbars". How do I get it?

  These Zoom controls have not been added to Firefox until version 4.0.

  You need to update to Firefox. http://www.Mozilla.com/en-us/Firefox/

• cannot drag and drop a shortcut on the desktop of the address bar.

  I can drag and drop a shortcut to the menu of bookmarks. I can't drag and drop in the menu bookmark on the desktop. I can't drag and drop the address bar on the desktop.

  You drag the text selected in the address bar or the button "Site Identity" (lock/globe)?

• My Dell coming 8 Pro Tablet cannot connect to the internet

  After that the last update, my Tablet Windows couldn't access the internet. I get this message when I run a troubleshooting tool:

  "The Dell Wireless 1538.802.11 a / ln g adapter knows pilot - or hardware-related problems."

  My tablet is our guarantee.

  I contacted Dell support via my laptop and got absolutely nowhere, was mixed around until I finally got a page that asked me several times for my service ticket #.  Whenever I provided, he gave me the same screen, he demands again. A little surreal.

  So here's what I know: my Tablet has no wi - fi connection. My tablet is plugged into my laptop, but my laptop does not recognize it as a drive. So I can't transfer anything directly from the internet on my Tablet through my laptop.

  (They are both products of Dell. Family feud?)

  So I need to find a way to get information on my Tablet without a direct connection and wi - fi, in which case the problem requires that.

  Or it could just be a problem with Windows Update. A year ago, someone has answered a similar question on this forum and advised the questioner to find the numbered Windows updates installed Xxxx and Xxxx, then uninstall them. The numbers, of course, do not match updates that have been installed just before that my internet connection disappeared. So I would have no idea what to uninstall.

  I would appreciate any advice on how to solve this problem.

  Thank you

  Janice

  In a general way, because your DV8P is a complete computer, you can just connect to your PC you could do with a smartphone (you may be able to do using a special cable).

  To solve the problem of WiFi:

  I had this problem and Dell technical assistance asked me to do a 'discharge' on the Tablet (apparently, static can accumulate in the Tablet, leading to the issue of WiFi).  Disconnect the power supply, if connected. Hold down the power button / stop of the Tablet and turn the Tablet completely off, continue to press and hold the power for 30 seconds (or maybe a minute); Let the only Tablet for 2 minutes; the Tablet is reactivated.  Which, we hope, will fix the problem (it was for me).

• Camera problem back on the standard dell platform 5130 pro 11, 64G

  It happens sometimes: the rear camera can not only be launched whenever I flip the camera on the back, the screen goes black and nothing happens.

  This problem does not appear immediately after the start, but it happens that after a considerably long waiting period.

  When this problem occurs, for the most part I can go back by simply clicking on the key to the victory under the screen, but it sometimes causes system freeze, where longlonglong I press the power button to restart.

  Other applications works perfectly. only this particular windows built in camera photo app!

  This software update was supposed to challenge it... take a peek! http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/Dell-venue-11-Pro?driverId=9GCGC&osCode=WB32A&FILEID=3338219578&LanguageCode=en&CategoryID=DD

• Keyboard Slim lose the connection with the Dell coming 11 Pro

  Someone meets keyboard slim interruption of connection with the Dell pro 11 site?

  He might have to unplug the keyboard, and the re - attach the keyboard to the Tablet again to use the keyboard.

  I have two Dell 11 pro + keyboard slim venue. Both devices have this kind of problem.
  It's absolutely wrong.

  How to solve this problem?

  Besides working with Dell Pro they explained to me that the keyboard must be used on a flat surface (not towers for example) and the keyboard & tablet should be at an angle of about 117 degrees between them.  Now, of course, you can't measure it, so just assume if you use on a table or desk and its supported properly you have to the correct angle.

  I find that if the keyboard does not after sleep or start arriving, simply lift the keyboard out of the surface of the table a few inches and let it fall down.  It will immediately start working.   I think that there is a sensor in the keyboard, which is not always realize or to calibrate properly in coming to life.

  If you have complications beyond the keyboard chip out of sleep, I'd take it upward with the support to push the issue.

• Cannot drag and drop widgets (content) on the home page

  I have Windows Vista Ultimate Edition with Service Pack 2 and IE 9 on a 32-bit platform. My home page content cannot be moved. Make my icons on the desktop and working my doc files. What is the problem? Can I added the content simply not move anywhere on the page where I want.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. this happens with all the gadgets?

  I suggest you to try the steps below and check if it helps.

  Uninstall, and then restore the desktop gadgets. Follow the steps to uninstall the gadgets.

  a. right click on the empty area of the desktop and then click Gadgets.

  b. right-click on the gadget and then click Uninstall.

  Steps to restore the Google desktop gadgets:

  a. click Startand then click Control Panel.

  (b) in the search box, type Restore the Gadgets.

  c. click Restore gadgets installed with Windows Office

   

  Hope this information is useful.

• I lost my volumn icon in my toolbar at the bottom and can't get the volumn. Help

  I can't find anyway to activate my volumn or upward.

  I can't find anyway to activate my volumn or upward.

  Use this tutorial:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Scroll down to three method. Step #2. Download the Enable_Volume.reg.
  Follow the simple instructions.
  When you are finished with Merg etc., restart your machine.
  Now, do a right click on the task bar > click Properties > at the top, click on Notification area > can you put a checkmark in front of Volume? If so, you're done. Will increase the volume.

  PS Ce is NOT called 'toolbar '. It is called the taskbar.

  t-4-2

• cannot drag source panel Panel program or the mounting Options

  Premiere PRO CS5, W7.
  
  

  I'm a beginner and it must be a stupid problem.

  I didn't succeed to drag a subitem in the program source Panel
  Panel or timeline. When the mouse with the sliding clip happens to
  the other Panel - a circle with diagonal line icon is added to the
  by hand.

  
  

  You create a sequence.

• Cannot drag and drop a pattern to the color chart

  I have a PC with Windows 10 so maybe that's part of the problem.

  I've been working with a very detailed model and using the function drag / move in the color chart with no problems.  Then all of a sudden it stopped working.  Any thoughts?  I can drag and drop other items in, but not this model more.  Any thoughts?

  Try and select the object complete, then object > model > done. This can generate a more descriptive error message. Will there be a clipping mask in your work?

• I'm stuck on a full screen without toolbar or the buttons, how to return to the initial display?

  I upgraded to FF #4 and rely on buttons and it is now stuck on the view.

  Press F11