Cannot drag to scrub the screen after update tvOS9.2

Similar Questions

• zBook 14 - cannot change the resolution of the screen after update

  After I installed software updates the portable suggested to me, my screen resolution went suddenly from 1900 x 1200 at 1200 x 720 after reboot and it won't let me change it, not even to a lower resolution. I'm very frustrated, because I need the computer week next for visualization work and I really need the screen works well.
  
  It doesn't let me change the resolution. Graphics and display drivers are up-to-date and functioning according to Device Manager. I did a system restore, but that just do everything worse although the resolution worked once again thing, I had to run a repair of the start several times before that my laptop would be starting another property again. This does not resolve the issue, given that the display drivers are not working properly (videos have been viewed very badly) and even after updating the computer won't start again, so I had made another system of recovery and now I'm to the point where I can not change the resolution and starting to be really frustrating. Also, (if it even starts) Windows is constantly freezing, forcing me to hard reboot.

  Thanks for any help, that all the world can offer.

  This looks like a lot of problems, you have there.
  
  First thing I would say is to do a check of the basic material. Your laptop will be built Diagnostics the F2 button on the HP logo. The hard drive on a test extended (approximately 45 minutes - 2 hours) and the memory test. If these two go, consider downloading of UEFI diagnoses from the above drivers download section. In all honestly, I think this unnecessary step for most, it tells not usually defects that are already not obvious. But he should have a graphics test, if it will throw a failure even if it is faulty is another matter but when even, of a value of a test.
  If all else fails, download on the phone for the HP warranty.
  
  If anything fails, run the memory on memtest86 + for about 12 to 24 hours. Download you, it's free, burn it to a cd and the start of it. And it works simply, in case of error, you have a fault memory.
  
  If anything fails on any diags, then nothing is most likely false, cool reimageries windows probably will solve the problem and its probably just a form of spyware or corruption of driver or something. Backup your data, reinstall a new copy of windows.
  
  But in my experience, from doubtful, repairs etc... freezing randomly and other problems are often a sign of a failing hard drive. And diagnostic tests are not always 100% to pick up a failing drive. For the most part, but not always. So, if its still high reading after a reimage, review the reader always a potential source of the problem.
  
  To the extent where it won't let you change the resolution? What you mean? As for the option is grayed out? Can you maybe post a screenshot and a screenshot of your device with the extended graphics card Manager.

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• HP Envy 13-j001ng 2 X: no rotation of the screen after updating Windows 10

  Hello

  After the Windows 10 update, the screen will not rotate automatically. Sensor apps tests show that they are working correctly. I have the rotation toggle lock in the notification Panel (I read that some people affected by similar problems don't have it). Any solution for now or should I just wait for updates?

  To solve the problem, I had to replace the pilot ODS sensor V2 with the Simple device orientation sensor driver. Now rotation works.

• Question of blackBerry Smartphones on the new icon/bar at the top of the screen after update 6.0

  Hello everyone, after doing the upgrade of software to the new 6.0, all of a sudden I now have a bar at the topof my screen, between the "speaker" icon and the search icon, it shows the messages in this blue bar when there are messages.

  BUT... all of a sudden this morning (one week after my upgrade) there is a small green icon in the middle of the bar, and the Green has a number next to it. I can't tell what the icon is, I have never seen this in my life AND I have no idea what means the number next to this icon. The number has STARTED OUT at 88 this morning and now the lunch hour it has a 62 next to the green icon.

  I have no idea how to do to post a photo or a screenshot of my phone here or I post a screenshot if you know EXACTLY what I mean.

  EVERYONE knows that little green icon with the number beside it? If then... What's to be average or what the purpose of it.

  Also, if someone could tell me how to post a screenshot of my phone, I'd be happy to put a picture of it so that you know exactly what I am referring. Thanks in advance for any help.

  LOL, no problem enabling, it is easy to forget things like that, especially if you stay on computers or forums throughout the day, sometimes the paragraphs tend to mix together.

• Cannot add or organize the bookmarks after update of Mozilla

  Did an update of Mozilla yesterday. Subsequently all the bookmarks and the superior browser tool bar had disappeared. With the community help I Got those backward with the exception of at least one category/title of the bookmark. Research on this title he has not revealed, but the search for bookmarks which were under this title aired on search results. However it was not clear how to create the title again and put the bookmarks under this title. The function to organize the bookmarks is missing. Also the feature to create new bookmarks disappeared.

  The menu planning is context sensitive. If you click on the bookmarks Menu in the left pane, or double-click it in the right pane, then Firefox should list current folders and bookmarks in the menu - and organize most of the items shaded in the menu should come back to life.

• Cannot be saved on the network after update 11.0.10

  If I open an interactive pdf that is currently on a network drive and save as I get a message that says "the document could not be saved. Unable to save this file name. Please save the document under a different name or in a different folder. "I'm a domain administrator and have full access to this place is not a permissions problem. I can save other documents it and make changes to them without problem. Only Adobe Reader. If I go to another computer with Adobe Reader 11.0.9 and do the same steps that it works without problem. Anyone out there know if there is a fix for this yet?

  I use Windows 7 64-bit. This also works fine if I save on my local PC. Only happens when we go to a network location. I also test it on a PC that has 11.0.9 worked well, to give birth to 11.0.10 and have the same problem where it won't save to a network location.

  Try to disable the Safe_mode as a "Test."  If it works then it probably means you need to add the share on the server as a "place of trust.

• Windows Update is stuck on the screen check updates for more than an hour.

  Original title: Windows Update problems

  I just got a new update for Windows 7 and got all my drivers installed. However, Windows Update is stuck on the screen check updates for more than an hour. Everything works except that, and I don't know how to fix it. It has updated two things: the Windows Update Agent 7.6.7600.320 and update for Windows (KB958488). He continues to seek constantly and never find anything.

  Please leave for 5 or 6 hours and if he doesn't find anything:

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• Refresh the screen after the removal of the UI elements

  Hello world

  I create a screen in which I use listfield to display data online as a way each line has a button Delete. I want to know how to refresh the screen after the deletion of data or a row of the screen?

  Because you actually using a HorizontalFieldManager to display each line, to remove it, you must remove the information in the underlying data store and then delete it HFM of his Manager.  That's it, removing the HFM will refresh the screen.

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• Palm Treo Pro trouble: Windows media player passes each time the screen saver updated

  The treo Pro is an excellent application of low power consumption screensaver that displays date, time and info missed calls. However, the disappointment is that when you listen to music while in screen saver mode, windows media player ignores all the minutes when the clock on the screen saver updates / refreshes.

  Since the clock updates every minute, the player skips a beat with unerring accuracy.

  It's the solution to this problem. Please, do not respond to a 'solution' to disable the screen saver. I who have already tested and am aware of it. I don't want to disable the default screen saver.

  Agree. I discovered that letting Windows media player running on the screen prevents the screen saver from kicking in (which she does if the phone is on the screen today). The screen always shows the player running but will drive according to the configuration.

  With that, the problem is solved when I play music in a car, but it will be a pain when walking or jogging.

  So I guess the only solution is to disable the screen saver with a single operation... desire, I had an app for that!

• Cannot adjust the brightness of the screen after Windows 8.1 update

  Hello

  After you have installed Windows 8.1, I can't adjust the brightness of the screen more.  I checked and updated all the drivers and nothing helped.  There used to be a brightness slider in the control panel in the power settings.  It's over now.  I've looked everywhere for a solution, but I can't seem to find it.  Any help would be greatly appreciated.

  Here are the specs of my computer:

  HP Pavilion 23-F213W Smart Touch

  Windows 8.1

  Thank you

  Many All in One computers are able to use HP MyDisplay in this http://www.portrait.com/dtune/hpc/enu/index.htmlplace.  There is a list of maps videos supported on this page and should help to restore the video controls setting.

• Cannot increase the resolution of the screen after Windows 7 updates

  Hey guys,.

  I recently did a Windows Update on my Win7 laptop and the resolution has been reduced from 1280 to 1026. So now, I have a screen size of 1024 and a black band on the right side of my screen. Essentially, I can't adjust or wear a size of 1280. Everyone knows that lately after the updates. This happened to me around the last week of April. I tried to do a system restore on it which works very well and it brings back to the full screen resolution, but once I restart the laptop he then it narrows down to 1024 on restart. It's as if the part of the screen becomes invalid.

  Hi Jesse,.

  I hear your frustration. It is a driver problem. So, lets get set for that (I hope, your BIOS is OK). What is happening is that your system resets with the incorrect driver. What you need to do is to 'disable' (not uninstall) the driver of 'bad' and use only the correct driver. That you should be able to do it via the Device Manager.

  Try this approach and see how you rate. Once you can get the 'good' driver to work properly, then and only then we will get rid of the 'bad' driver (uninstall).

  Kind regards

  BearPup

• I got the blue screen after update

  Hello. I got a bluescreen error after update my entire system today. He wrote:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1030

  More information about the problem:
  BCCode: 116
  BCP1: 85F5C510
  BCP2: 8E813DE0
  BCP3: 00000000
  BCP4: 0000000D
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  And continued to restart every time I went into IE games, etc.
  What should I do?

  Hello

  Have you updated your screen/video or other great drivers latetly - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there. (Analysis of thethe)
  Minidumps is not necessary that you have updated the video drivers because it is
  very often the cause of the issue and only if the BSODS continue.)
  

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ---------------------------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a period of time
  instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• white screen after update; Unable to get the computer to open even in SafeMode (Sony Viao Vista)

  After you start this morning, had a message saying necessary to revive the updates to take effect.  Rebooted and got blank screen for a long time.  Did a hard STOP.  Have tried rebooting but it just cans.  Have you tried to reboot (drums on the introduction of Microsoft screen), normally in safe mode (with and without networking) - cans after loading files Windows with "Please wait...". ».  Help!

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner