Cannot enable the wireless network adapter

Similar Questions

• Satellite A100-529: How can I enable the wireless network adapter

  Hi all!

  I'm new here, but I want to know how can I activate the wireless network device. On my Toshiba Satellite A100-529 keyboard is a Fn key that must be pressed with the F8 key to turn on the wireless network device. I did, but it does not work.

  What can I do to turn on my wireless device?
  Thank you!

  You are right. The FN + F8 key combination should be used to switch to the WLan card.

  But look, man. Have you checked if your laptop supports wireless network card?
  I think it does not support the minPCI wireless network card and the card does not exist!

  That's why the WLan card cannot be activated :) you know ;)

• Windows 7 do not connect the wireless network adapter

  When in Device Manager it is k o workining with all installed software & advance mode: saying activated

  OM

  Original title: windows 7 do not connect the wireless network adapter when in Device Manager, it works with all installed software & advance mode: saying activated

  Hi omsaini,

  Thanks for posting your query on the Microsoft Community.

  Sorry to hear that you have to connect to a wireless network adapter trouble.

  To help you further on this subject, it would have been really helpful for us if you had

  mentioned a few details such as:

  (1) is there an error message you get when you try to connect to the internet?
  (2) is the persistent problem with all browsers installed on the machine?
  (3) what is the brand and the type of the network adapter (whether ADSL or an adapter included)?

  However, there are a few steps that we can try first:

  a. the following link has a very good tutorial on how to install a network adapter on the computer:

  http://Windows.Microsoft.com/is-is/Windows-XP/help/networking/install-wireless-network-adapter
  (Note: the link is for Windows XP but works for Windows thus 7\8)

  b. the following link provides a holistic approach for DIY difficulty on the connectivity of Windows:

  h ttp://Windows.Microsoft.com/en-US/Windows/Network-Connection-Problem-Help#Network-Problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  c. also, you can visit the following links as well:
        http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7
  And http://windows.microsoft.com/en-us/windows/cant-connect-to-network#1TC=windows-7

  I hope this helps. Please contact us if you encounter any problem.

• ConfigFree: windows pop up message: sellers application is controlling the wireless network adapter

  Hello

  When I draw a line from nearby wireless networks (with or without WEP security) to the laptop in the middle icon,
  a popup message with the text: the provider application is controlling the wireless card.
  Does anyone know what this message or where I can get the answer to this question?

  After clicking on it you may see far (only the 'ok' button is available), the connecting line with the laptop wireless network disconnects after
  a few seconds.

  Thanks a lot for helping me...

  Hello

  In my opinion this message appears because a 3rd WLan utility configures and controls the WiFi connection!
  There are different possibilities:
  The laptop uses the Intel wireless network adapter and the Intel Proset utility configures the WLan
  Or
  The laptop uses the Atheros WLan card and Atheros Client utility configures the WLan
  Or
  The windows have the option has been enabled and do this job.

  In this case ConfigFree application cannot configure and control the WiFi connection!

• HP 15 D103tx: can't detect the wireless network adapter in Device Manager.

  

  I can't detect wireless network adapter in the device even Manager after installing the drivers wireless from the following link: http://support.hp.com/in-en/drivers/selfservice/HP-15-d100-Notebook-PC-series/6782098/model/6837966?...

  Wireless "F12" key remains orange color after pressing it several times. I tried to install "Drivers HP wireless button" from the link above, but between th installation process I have error ot OS isn't accomanied for pilots

  

  I can't connect to a wireless network from my wireless adapter doesn't work. I have to sit near my wifi router to connect with laptop computer using lan cable.

  Even HP Support Assistant does not detect the wireless network card hardware

  

  Help, please!

  Hello

  According to HP Partsurfer, your lapotp came with Atheros AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter combination WLAN. Also, your laptop came with FreeDos and I guess currently installed Windows 8 64 bit OS, I am correct?

  The Support page for your machine, doesn't show that the Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver for Windows 8.

  Please download, save & install the Dirver and restart the system, check if the wireless works.

  Concerning

  Visruth

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• Router E4200, cannot secure the wireless network

  When my E4200 wireless network appears on a discovery list of wireless networks, there a padlock beside him in devices (like my Xbox and iPhone) that who would use to show that it is a wireless network, requiring a password. When I use my Xbox to connect wireless now, he said: "you connect to an unsecured network. Are you sure you want to continue? »

  I used the web portal to select 'Factory Reset' of my router. I also told my iPhone to forget and not automatically connect wireless network. After factory reset, I went to the configuration section of the web page wireless network access router, put a new name for the wireless network, personal WPA2 enabled for 2.4 and 5 GHz networks, developed a completely new password for two I had never used before and then looked for the network on my iPhone. I chose it and it connected right away without asking for a password. Still once, the network does not appear with a padlock next to him in the list of devices to the network from my iPhone WiFi and my XBox says always that this is an unsecured network.

  When using my internet browser to access router, WiFi networks are both classified as WPA2 Personal and each has a password in the password box (and Yes, I recorded the changes - that's what it shows even if I disconnect and then reconnect to the router access.) I tried to remove the power cord for 30 seconds and plug in again and there is no change.

  It's quite a recent change, like maybe the last week or more. I don't know if there was a firmware update or what - my router is configured for auto updates and when I click to check the latest updates, it says that there are no more updates available.

  TL; Dr: said access my router my wireless security is turned on. None of my wireless devices see as secure WiFi networks and each of them can connect without having to type a password.

  Do a reset factory and set up from scratch.

  If this fails, try this:

  Manually download the FW file to the local office of PCs.
  Reset the router, use IE or FF with all security disabled add-ons, load the FW file and let you treat.
  Factory reset the router once more and set up from scratch.

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Operating system is unable to find the wireless network adapter

  I have recently reinstalled Windows 7 on my HP Pavilion Elite on a new hard drive.

  Since the installation, Windows is not able to recognize the NIC wireless on my machine. I imagine that there are drivers somewhere on the recovery discs that I bought out of HP, but those who stick me in a boot loop and aren't really good for nothing.

  I opened the computer case and didn't see any wireless network adapter card (two cards are the video card and the expansion USB3 card), so I guess that means it is integrated. Who is?

  in any case, long story short, I want that my PC for wireless internet, as it did before my other hard drive has failed, but the recovery discs that I bought last week off the coast of HP do not work so I do not know what to do next. Is this a driver problem?

  For what it's worth, I downloaded a bunch of the "drivers" section wireless network adapters and went through them until I found one that worked.

  Problem solved.

• 5525 printer cannot find the wireless network

  Help

  I'm not good with technical stuff and need help with this problem.  Printer works well before going on holiday - power off, including the CISCO router when we went away--returned and turned on any return, printer will not connect to the router again.

  Have reinstalled router without result.  All other computers, phones, etc. to connect to the router fine.

  Wireless network test that the MAC address filtering is enabled, they suggest however have checked this and it's not.

  Wireless configuration wizard can find the network but it just seems impossible to connect to him.

  Please assume the lowest level of technical understanding when you reply!

  Thank you

  Hi K27,.

  I see that you are having some problems getting your Photosmart 5525 reconnected to your network after just unplugging a bit. I understand that you have your information wirelessly, but I don't want to set a link here which will take you to our HP print and doctor Scan, which can help you check some things on the wireless network.

  Since you already feed the router to bike, I would recommend restoring the default values of network on the front panel of the printer. You'll want to have your printer on the home screen (should say Photo, Apps and copy). On this screen you want to touch the key/tool icon in the upper right corner, then you want to click on wireless and made scroll down looking for default network. Once you click on that it will ask if you are sure and you want to say Yes. Once that is done, I would recommend the router/printer power cycling tips that were previously provided and then run the wireless configuration that you've been already and it should be able to connect at this time.

  That should hopefully fix it for you, so let me know what happens and I wish you a nice day!

• Satellite M45-S265 - cannot install the wireless network

  Hi all!

  My laptop has had a big problem and HARD drive crashed. Unfortunately I lost all the data with no chance to recover anything. I installed a new HARD drive. I installed Win XP - SP3.

  But I'm unable to install the wireless network. I continue to pass the button in front of the laptop - nothing. I type the combination Fn + F8 - nothing. I think that I have not installed the driver corectly.

  P.S. - of course, I lost the CD.

  Can someone help me?

  Thank you.

  Hey,.

  > I think that I have not installed the driver corectly.
  Then you need to (re) install the WLAN driver. Otherwise, you are not able to use the WLAN connection correctly.

  Anyway, your model is listed on official Toshiba US page so that you can get all the drivers:
  http://www.CSD.Toshiba.com

  If you have any other questions, please let us know! :)

• V715w cannot set the wireless network

  Reference Dell V715w printer.  W7 x 64.

  Firmware already updated, clean uninstall/install, restarted router & modem, disconnect, etc. (all bases).  The name of the network on the control panel of the printer says '7ff5c4 print server.  This isn't my SSID.  When reinstalling, I never get the window to select the wireless network; Instead, the Setup program goes directly to methods of connection/bug.  Any help?  How can I do a hard reset of the printer?  I already unplugged for a long time; I don't see a reset button. I already have the two software on the printer resets.

  Short version: printer not finding a decent wireless network; install the software never gives me the chance to choose the wireless network.

  wdprice3,

  It's confusing. I have this model and have minor problems with it.

  Unplug the printer from the wall. Remove the brick power for 60 seconds. This will reset the printer receives error messages. Maybe this will reset the printer.

  

  Rick

• Photosmart C6180 cannot detect the wireless network

  I have a Photosmart C6180 for over a year, and until recently it connected wireless very well.  But since a week ago, it can't detect the wireless network.  I turned off the printer and wireless router several times each without success.  The "Wireless Setup Wizard" running on the C6180does not help. Watch simply screen printer "looking for... wireless router. "indefinitely, until the function Cancel.  The wireless router is about four feet from the printer, in a direct line of sight.  In addition, I have wireless Internet access using the same router and continue to do this successfully, then the router itself works.  Recently I have updated the firmware on the router as well (after the beginning of this problem).  Running the network Test report wireless on a 'PASS' C6180 returns for "Radio on" but a "FAILURE" for "use of Radio". The radio broadcasts as "about" section of the Menu Radio wireless network.  My router is a Belkin Wireless G Router model F5D7230-4.  The printer prints very well with a wired connection, but wireless connectivity has been a key reason behind my purchase.  Any suggestions greatly appreciated.

  Sorry, but your wireless radio is dead.  Its time for a new printer.

• Moved from Office Windows 7 from one room to the other and now it cannot find the wireless network

  Hello world

  I have a HP Pavilion running Windows 7.

  He was hooked through the ethernet in a single room.

  I moved it to another room where there was no inflexible access, so I relied on the use of our wireless network.

  Now, the computer will not even find the wireless network.  When I have the help, it says "no available connection."

  In the center of the network, selecting wireless has a red X to the left of the green signal bars.

  At first, I wondered if maybe the computer was in a "dead point" in our House, but I've put a laptop beside him and he found the thin wireless network.

  Any help?

  Update: I tried system restore and tried to stop/resume knowledge network locations, but to no avail.

  Here is the info on my card wireless directly from HP site:

  Original driver for the solutions of Dualband network Atheros 802.11 Wireless Module a/b/g/n.

  I found what I think, it's their website, (http://www.atheros.cz/atheros-wireless-drivers.php), but surprise... they only model # s, my info does not.  Ugh.

• Satellite M70-181 - cannot see the wireless network

  Hello

  I reinstalled the entire system (Windows XP) and now system did not see the network wireless at all. How can I install it and put it back?

  Laptop Satellite M70-181.

  Thank you.

  Hello!

  Have you installed all the drivers for your laptop and also the network wireless driver? You can find all the drivers on the Toshiba site.
  Check for yellow exclamation marks Device Manager.

  Here in the forum, you can find 100 or discussions on the wireless LAN using.. Please search for it.
  Use of WLAN you should check the TCP/IP (DHCP or IP) WLAN card settings and you should use the same standard WLAN (e.g. 802. 11b) as on the router. Then, you should see the router and if you know the password, however, you can connect.
  If you can find t the router, disconnect it from the AC/DC adapter for 5 minutes and then plug it in again.

  Good bye