Cannot enter BIOS mode

Similar Questions

• HP Pavilion g6-1313sh Notebook: dual Radeon graphics card - cannot enter bios mode fixed

  Hello!

  I recently bought this laptop apart from my friend and is struggling with this for a few weeks now.

  I was on the forum every day for a few hours without result.

  so, my laptop is HP Pavilion 1313sh g6 with Win7. I have the latest version of the bios, so I could put my gpu bios mode set instead of dynamic.

  Here's the problem... When my setting was dynamic, I got the "switchable graphics" option and I could put the preset by application. as many people pointed out, it really does not work, so I went back to fix.

  This option is now missing. so I tried in CCC, following this: http://support.hp.com/us-en/document/c03048374 in the fixed bit.

  It is, I have no change option... I only get the graphics card AMD Radeon Dual 'activate' or disable... but not the button to switch permanently to the highest performance card... checked in CCC, it recognize my 2 cards under hardware (1st HD6520G 2nd is Hd7400M).

  I start to tear up the rest of my hair. Please can someone tell me what I miss? as said, the most recent drivers from the site is all settled.

  Thank you!

  Hi @SmokeyJohnny ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion g6-1313sh Notebook and issues with graphics switchable. You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  If this does not resolve the problem would be to uninstall the graphics drivers listed in your device manager. Reboot the laptop and it must be reinstalled the proper drivers. Yours is the AMD Radeon HD 6520 + 7450 Mr. here are your drivers if you need.

  I hope this helps.

  Thank you.

• Cannot enter Sleep Mode after undating for win7 / new BIOS

  Model: dv4 1435dx

  problem: cannot enter the mode 'sleep', when close the lids or click on 'sleep' without closing the lid, computer, enter the mode 'sleep' but immediately wake automatically. but it will not occur if the computer in mode sleep automatically

  So, don't know where the problem occurs, the first time I got Windows 7 update kit. It automatically update the BIOS of F43 to F44. then install windows 7. I don't remember if this problem occurred at this time. seems not at first, but after 1/2 weeks later

  can I update the BIOS to F61. problem still exist. then F65A. problem still exist.

  all other things are fine. No reset automatically. Hibernation is very good.

  So, I don't know if this is a bug in the latest version of the BIOS.

  In addition, update the driver from HP protect smart update of the window (I installed the driver from the website of HP, but windows update say there is a better driver)

  I wonder if it will be a problem too.

  Help, please. without "standby" mode, it is not good at all

  Oh, well, it's kinda stupid to answer the question myself...

  But I can't find the solution

  These guys have the same problem with me

  Just to go the device management, and then right click your mouse wireless, cancel the 'allow this device to wake your computer'... then problem solved.

  : bravohelen:

• ThinkPad E330 cannot enter BIOS/UEFI more

  Hey guys, I got a very annoying problem with my E330.

  He came without OS, so I put 8 Win on the preinstalled HARD drive. Then, I went out for one SSD and put Win 7 on it.
  (all UEFI mode)

  Since then I can not enter in the BIOS/UEFI more press either Enter or F1.
  Pressing enter gives me still a beep, but then Windows continues to load normally instead of view several options, like he used to do.

  And yes I am aware that I need a cold start to Win 8 to enter the UEFI

  The only way to access UEFI at this time is through charms-bar restarting 8 Win in UEFI thing.

  I tried to reflash the BIOS that does not of course because this is the same version, tried to remove the CMOS battery, that gave me an opportunity to enter the UEFI with F1 when he complained the date/hour of time.

  Switching to Legacy only brings me to an infinite PXE - something loop of the error, but I still cannot get into the BIOS.

  I tried pressing all combinations of keys Fn + F and without the Fn. Nothing works.

  I don't want to return the laptop, but it is a deal breaker for me if I can't Win 7 running on this subject with UEFI accessible.

  OK, the problem was solved with the help of the someotherguy of the user from the forum. It has detailed instructions.

  Looks like that install Win 7 mode UEFI corrupts the BIOS.

• Cannot enter BIOS - Satellite-P50t-A-119

  Cannot get into the BIOS. F2 works Océ try 20 times. Same problem with the F8 key. I tried 30 times, it worked only once. Laptop is brand new.
  Is there a stable way to get into the Bios?
  Is there a stable way to use the F8 key.

  I never had problems like this with different computers

  Hello

  If you have a new machine with Win8, you must perform a full stop in a first time. Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  It is explained how to do this. Restart your laptop, and you should be able to enter the BIOS settings. I don't know which F button, you need to use but on my I use F12 and there entry option settings.

  Check it out please.

• Cannot enter BIOS on Win 7 HPE with American Megatrends BIOS

  Although others have asked how to access the BIOS Setup interface, the answers have not solve my problem. so I write another similar question.

  According to the subject line, I can't access the BIOS Setup interface during startup.  My system runs Windows 7 HPE.  The equipment includes an elite group of ECS motherboard that came with BIOS of American Megatrend chip version 4.6.5 and is dated 05/03/2012.  I have never flashed or otherwise updating of the BIOS chip, but I could bring up the graphical user interface and change the options.  I did quite recently in fact.

  When I power fail system and/or entering the cycle of rebooting from the button start, the system stops and then begins to start and displays the start of American Megatrends screen.  Press DEL repeatedly has no impact on the continuation of start-up.  He proceeds as if the keyboard were not active and the system did not, therefore, the interruption of the keyboard...  Because the splash screen also mentions F2 and F7, I tried these interruptions as well, nothing helps.  The boot process has continued.

  I searched the web until my fingers are simple bumps and can't find anything really useful.  I read and reread mother ECS card manual without finding anything.  I found a FAQ on the web page of American Megatrends, which addressed problems to access the BIOS with Win 8, which suggests that the change of power options would be effective. However, these referenced power options do not exist in my win 7 system HPE.  Yes, Power Options are available from the Control Panel, but the individual options are not the same to win 8.

  FWIW, I pulled all the hard disks internal power cables to see if I could access the BIOS interface.  I was able to do so; However, without BONES, the keyboard is not active so no keyboard interrupts can be issued.

  I would be grateful for any advice on how to influence of post-processing to slow down and make sure that any issue the keyboard interrupt is seen and followed.

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with you are not able to enter the BIOS American Megatrends BIOS setup.

  I can understand the inconvenience that you have experienced and will try my best to help you.

  In order to get more information about this, I suggest to visit the link below and check if that helps.

  http://***.com/products/BIOS-UEFI-firmware/

  Also, I suggest you to update the BIOS and check if that helps. Please visit the link below and check if that helps.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows/BIOS-FAQ#1TC=Windows-7

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Cannot enter BIOS or boot from CD - Satellite 5100

  Hello

  one of my friends has ruined his Toshiba Satellite 5100.
  He has erased all the partition on the disk hard while the laptop always using the default setting.
  so, I could not boot from the cd or enter the BIOS.
  Is there any solution for this?

  Thank you

  Hello

  You can use different ways to boot from the CD drive.
  You can press the C key immediately after restarting the laptop.
  In this case, the laptop should boot from the CD. (Don t forget to insert the CD)

  Another way is to change the boot order in the BIOS. To enter the BIOS, please use the ESC key.

• Re: Satellite Pro M30: cannot enter hibernation mode or standby

  I have a Satellite Pro model M-30 # PSM35E-000NU AR recently the hard drive crashed and I installed a new 80 GB replacement.
  Now I can not access the 'characteristics of hibernation or standby.
  In addition, shortcut keys are inop.

  When I go to programs, utilities Toshiba the only option available is SD memory card format.
  I can't access the link of "accessibility". and I can't access the configuration of H.W Toshiba.

  Can anyone help me with any of them?

  Hello

  For me, it looks like you don't have Toshiba drivers all installed and necessary.
  Have you used the Toshiba recovery disc after the HARD drive has been replaced or have you installed the Windows XP using a clean CD Microsoft?

  Please note that the common Module are very important!
  You must install this software first!
  The Toshiba Power Saver help you to enable Hibernate mode and also to access standby mode!

  On the Toshiba European pilot page you will find all necessary drivers and you'll also find installation instructions.
  Follow m this and I sure will get you everything works again!

• Cannot enter BIOS using F1 or entry

  I'm at a complete loss here. Brand new T430. I changed the settings in the UEFI BIOS and installed Windows 7 x 64 with success. But I can't get into the BIOS. Entrance to F1, F12, nothing works.

  Help, please!

  Thank you very much!!

  Hi all

  I solved the problem. Just an update of the BIOS!

  Strange that the initial BIOS does not work!

  Thank you

• Cannot enter BIOS or Option of Boot to display on my desktop Acer Aspire M3450

  For the last few days I tried to access in the BIOS or The Boot Options screen by pressing the keys with " DEL " for BIOS and ' F12 ' to The Boot Options screen. Same pressing down both keys on my keyboard and switch to normal startup with Windows 10 logo screen and then type password. I'm sure you know that this office is not supported for parameters of the UEFI. I tried with Settings\Update and Security-Advanced Options- then have 6 names on the double column , but I'm not sure that one to take to solve the problem. Here are the 6 names below:

  System restore

  System Image recovery

  Startup Repair

  Command prompt

  Startup parameters

  Go back to the previous version

  Everything what I wan tis to solve two things by pressing the ekys for BIOS and the Boot Options screen. That's all that I need it. Or I need to reinstall the entire disk operating system Microsoft Windows 10 Home Premium 64?   Either way, my computer's desktop Acer Aspire M3450 game.

  Thank you

  John

  It's a good thing I do not get out the my desktop's CMOS battery. Someone I know told me I 'Try to change the keyboard' Guess - it works now. The USB keyboard that I just bought does not work so I went back to the wireless keyboard that I used all the time. So now my problem is solved.

  Can I ask a question - why doesn't the USB keyboard support to accept that I press the key after the reboot for BIOS or Boot Display Options? Hope that someone here in this forum will answer for that.

  Thank you

  John

• V3 - 771 cannot enter BIOS to rebuild from recovery DVDs

  Hi all

  My installation of Windows 8 has been corrupted and does not start. So I just want to get the laptop to boot from the recovery DVD or any DVD so I can rebuild.

  No matter how hard I press F2, nothing happens and I get "no boot device, press a key." It just takes me to a blank start menu! I tried with what I know to be bootable CD/DVD internally and have used external DVD drives.

  I want to just get into the setup to boot from the DVD drive. How difficult that can be. Very far and completely frustrating.

  Any advice or help welcome.

  Thank you very much for your time.

  Paul

  Hello again,

  This problem is corrected now strangely. I had tried to start on many drives of type Ultimate Boot with no luck. I jumped in a DVD of Windows 7 which has started loading, but didn't the first time.

  I rebooted and then the "F2" worked well. I changed the classic UEFI BIOS got up the menu key to boot at startup and started on the DVD of Windows 7. Load up now very well.

  This is nuts. Affect the initial installation of Windows 8 that crashed BIOS/UEFI? I'm old school and both should be completely independent. The operating system should have nothing to do with the computer startup mechanism.

  Thank you very much

  Paul

  Edit: Looks like Secure Boot is the guilty https://technet.microsoft.com/en-us/library/hh824987.aspx

• sleep patterns that my computer cannot enter hibernation mode after accidentally deleted my hibernation files

  original title: modes of sleep

  About three weeks ago, I did a disc clean up and accidentally deleted my files of hibernation. now my computer can't get hibernation mode, how can I fix it.

  I can't see any link please send again

  http://support.Microsoft.com/kb/928897

  "I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable"

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• cannot enter safe mode

  MoneyPak virus has locked me out of safe mode. tapping f8 won't take me in safe mode, and it has locked me when I normally start with a white screen that hangs on the windows installation disc. How can I get to the safe mode when f8 does not work. Help

  Hello

  Use method 3 is this removal guide: http://www.selectrealsecurity.com/remove-ransomware
  Let me know if this helps you.
  Brian

• Windows Mobile 8 slow and freezes and cannot enter safe mode

  Hi guys, I hope you can help me with a Windows laptop, 8 that gives me problems. I'm trying to help out a friend, and honestly I feel like I'm out of my depth. The initial problem was that the laptop has been slow to respond, very slow, I suspected a virus, ran a Norton scan, it turned up nothing, I ran out of time so I put in safe mode and it gives back, with a significant improvement of the laptop in safe mode. I got the laptop back today and it is always very slow to respond despite having 6 GB of RAM and specifications that must run Windows 8 very well. Is no longer possible in safe mode, and every time I try to put it in safe mode I see Start followed a white/black screen samsung, i.e. when the process ends. However when I try a normal start it starts, but at a snails pace and goes to the login screen, where it is only partially acceptable (it meets more frequently). Any help you guys can provide would be great, thanks in advance, do not hesitate to ask any questions and I'll try to get back to you as soon as POSSIBLE.

  Hello

  You might want to look in the Startup tab of the the Task Manager for any substance uneeded...

  In particular, all that has changed recently...

  You could also look into the Services of MSCONFIG tab, hide all Microsoft and see what remains...

  Someone not know I had a similar problem, and their main problem is that something called LogMeIn.

  It is in the Startup tab...

  What processes Taskmanager shows running?

• p6320f cannot enter BIOS

  Hello

  I have a serious problem I think...

  My p6320f freezes usually just on the HP logo... Sometimes, however, if she was going on the logo, it shows an error something like "unable to boot from the hard drive.

  He can't get into the BIOS! No matter how many times I press F10 (or any other F keys), it freezes.

  PS: Just installed a new Seagate 2 TB internal SATA hard drive after the failure of the original

  Any ideas?

  Thank you

  johnstevens wrote: Hey Hanspuppa if it's the fault of the card from my mother, it means I need a new computer?

  Or can I just know what part of the motherboard is defective? If so, how? Thanks for the help. JS

  Hello johnstevens, usually the only element on the motherboard that can be replaced by the user would be the CMOS battery.

  I replaced motherboard capacitiors failed a few years ago, when these faulty capacitors have been a real problem for the PC industry. This problem has since been resolved largely. Different types of motherboard capacitiors are now used.

  There are also some cards diagnosis motherboard which are used to diagnose motherboards, but they are mainly used by manufacturers of motherboards. When they find a defective item on the motherboard, they have the tools and expertise needed to replace the defective item and it recheck once the repairs have been made.

  If the CMOS battery does not solve the problem, a motherboard replacement seems to be the most viable solution, or buy a new computer. These replacement motherboards can both, cost half the price of a new Tower.

  You wouldn't need a new monitor unless your current monitor is an old, defective, or you want a larger screen size.