Cannot export the configuration/build vCenter journal newspapers grouped

Recently, we had a major outage with our two ESX 4.0 host. Initially, they would take extended periods of time to perform simple tasks (reset of VMs, the host migration, etc.) without completing successfully. After restarting the service mgmt-vmware on one, he has started not back until I killed the process go. He then returned to the top, but wouldn't connect the server vCenter (4.0 update 3). Finally, the second host disconnected for unknown reasons. Now, we are trying to shoot the balls to vCenter to understand what has happened and we have questions.

When it is connected to vCenter using vSphere Client I go to file > export > export system logs and an immeidately error message stating "cannot create a beam of diagnosis. I then log on to the vCenter server and click Start > all programs > VMware > generate vCenter Server log bundle and a quickly flashing error message that makes reference to the vc - support.wsf cscript giving a "VBScript runtime error: component ActiveX cannot create object:"Scripting.FileSystemObject"'." Any ideas on what may be limiting pull me the papers?

Welcome,

I found a few kb´s.

http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1010705

http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1026722

check if help.

Please, do not forget the points of call of the "useful" or "correct" answers

Mauro Bonder - moderator

Tags: VMware

Similar Questions

  • USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

    USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

    Once again... Thanks for the tips...

  • I get the message cannot load the configuration settings whenever I try to download Adobe Reader

    I get the message cannot load the configuration settings whenever I try to download Adobe Reader

    Try to download the adobe reader Offline Installer.

  • What is the best export the configuration when you want to place your video on Facebook or youtube

    What is the best export the configuration when you want to place your video on Facebook or youtube

    Hi Robert,.

    Here are the high quality requirements of Facebook: How can I ensure my videos are of high quality. Facebook Help Center | Facebook

    Formats: this video file formats can I upload? Facebook Help Center | Facebook

    YouTube: recommended encoding download - YouTube Help Center settings

    Thank you

    Kevin

  • Impossible to export the configuration of IOM - export popup window closes

    Hi all

    I have improved my OpenSUSE 12.3 to 13.1 and now I am not able to export the configuration of the IOM. When I click on export in the System Administration Portal, the popup window is opened and closed immediately.

    I have the same problem on Windows 7 with JAVA more recent.

    Very interesting, is that the export of the IOM 11.1.2.1.0 configuration works very well. In the version 11.1.2.2.0 not!

    Do you know how to solve this problem? (btw. I don't want to demean my Linux or Windows with Java)

    I think it is a bug in the IOM.

    Thanks and greetings

    Milan

    Oh... we discovered what the problem.

    DB password expired yesterday!

  • Cannot set the configured property "/ Initial.initialServices".

    Hi all

    I'm getting following error.

    05:21:52, 006 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet

    05:21:52, 013 INFO [STDOUT] * error

    05:21:52, 064 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet

    I checked the path of configuration of two components and the structure of the servlet is as below.

    src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java

    For properties files I created them under the path - config/atg/dynamo/servlet/dafpipeline / config/atg/dynamo/servlet/pipeline

    Inside of these I keep the files FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties

    The Initial.properties is as below - config/atg/dynamo/servlet/Initial.properties

    The content of Initial.properties is-

    & initialServices =.

    / ATG/Dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,.

    / ATG/Dynamo/servlet/dafpipeline/FacebookProfileRequestServlet


    Should I have to keep the two pipelines-dafpipeline and pipeline or one of them?

    And my pipeline structure is correct or not?

    How to solve the error above?

    Please help on this!

    Kind regards

    Prateek

    You seem to be confusing core components and classes Java.  They are completely different.  The error message that you get "Unable to resolve component", says that the kernel is unable to find a file of specific properties anywhere in the directories named in your configpath trees.  To be precise, there is no file named /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties in your config directory.  If I read correctly this conversation, it is because the file with this name is a .java file, not a .properties file.  The two most likely causes of your problem are:

    1. you have a file of properties somewhere that mentions/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet as the value of something else than $class.  $class is a special case whose value is sought by a Java ClassLoader in the classpath.  Values of the other properties are interpreted as references to the component, and looked up from core in the configpath.

    2. in the directory tree that contains the /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties isn't in the configpath.  ATG displays the complete configpath during startup.  If your directory is missing, you have may have specified correct information in the entrance of the ATG-Config-path in your module MANIFEST. MF file.

  • Export the configuration information for each group

    How to export the configuration information for each group? (I want to see the information that this group has read or write access to the cube XXXXX)

    By LCM, I was able to export information on groups and users. But no information about its commissioning. can any body tell me how can I get the configuration of shared services information

    We have a utility to do this, or can we get this information using LCM?

    Any information about him will be useful

    Thank you

    The commissioning is under Application groups > Foundation > Shared Services > native Directory > assigned roles > then choose the product / app

    There is a utility command line available if you want to automate the process of execution of export - Oracle Hyperion Enterprise Performance Management System Lifecycle Management Guide, you create the definition of migration file but which can be done by running an export.

    See you soon

    John

    http://John-Goodwin.blogspot.com/

  • Cannot find the configuration file in the classpath

    Cannot find the configuration file /oracle/apps/prc/po/...applicationModule/common/bc4j.xcfg in the classpath.

    Hello!

    I try to run the following code:
    String appModule = "oracle.apps.prc.po.manageDocument.uiModel.viewDocument.applicationModule.ViewPurchasingDocumentApplicationModule";
    String cfg = "ViewPurchasingDocumentApplicationModuleLocal";
    ApplicationModule applicationModule = (ApplicationModule) Configuration.createRootApplicationModule (appModule, cfg);

    I get this error message:
    Exception in thread "main" oracle.jbo.ConfigException: Houston-33001: could not find the configuration file /oracle/apps/prc/po/manageDocument/uiModel/viewDocument/applicationModule/common/bc4j.xcfg in the classpath
    at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:430)
    at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:293)
    at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:557)
    at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1334)
    at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1312)
    at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.getXMLData(generateXml.java:26)
    at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.main(generateXml.java:39)

    I checked and the configuration file is in the correct directory, and I can see it in my Application Module - Configurations. No idea why this is happening? I need to configure something specially for it, or add it in my classpath? If so, how am I supposed to do?

    Thank you

    Mansi

    Published by: Mansi G on October 6, 2008 11:56

    Where is the code you posted? Running in a separate project, I guess? This project has a dependency on the project that contains the specified app package?

    And just to check (although by default, JDev should do it for you) - the project of app module has been compiled since adding the configuration, right? You should check that the config is not only the title of the project/src, but the title of the project/classes.

    Published by: Avrom Roy-Faderman on October 6, 2008 14:02

    Oh and BTW - I guess it's not an application typical of ADF, right? In a standard application of the ADF, you would very rarely need to instantiate one module application in code like this. You can only let the function of data binding for you. The technique that you use is the most appropriate for purely programmatic cases, no - UI. (for example, once I tried to put in place an SMTP server, supported by the business components. It was a case of ditching databindings and do the kind of thing that you do, because he had no layer view (because there is no user interface for rendering).

  • Cannot save the vCO with vCenter WebClient

    Hi all

    I have a strange situation that I hope you can help me with.

    Basically, I am fighting to save the vCO with vCenter WebClient device, when I try to add in the web interface of vCenter, the test connection fails.

    The vCO device has been configured to use AD authentication and the vCenter plugin seems to be set up correctly. In fact, I can run all workflows from it interact successfully with the vCenter.

    I followed the troubleshooting steps in similar positions, but none of them have worked:

    Re: impossible to integrate vcenter orchestrator with WebClient

    Re: Can't save orchestrator in vsphere client of web (v5.5)

    I can see the extension of vCO through the https://vcenter1.xxxxx.com/mob . I have also not saved and put it back with the same result.

    I also tried with different versions of the device to vCO (5.0, 5.5.1 5.5.2...) but no joy with any of them.

    I want to emphasize that I used a device registered with vCenter, vCO which has been deleted. After checking the mob site, I discovered that the extension pointing to this previous vCO was still in place, so I recorded. But the issue has not been resolved.

    vCenter 5.5.0 build 1750785

    vCO 5.5.2 build 1951762

    Any other ideas?

    Any help would be appreciated.

    In order to use the vCO within customer web vSphere vCO must use SSO authentication and SSO used must match the one used by web vSphere client.

    What happens is this user log in vSphere client and web based on as user token credentials is generated.

    This token is presented to the vCO and vCO is not able to check (because in LDAP mode or using different SSO server or...) vCO rejects the request.

  • You cannot change the configuration of the host

    I have stop my vm which is on san emc readers and he zoned for a second esx server.

    When I scan I can see the disks but I do not see a data store. then I try to add storage, signature of Dungeon and he tells me "cannot change the host configuration.

    (1) what I do 2) I tried vmotion and it did not work

    What is happening in vCenter, correct?  I had this happen in beta.  Connect to your ESXi host and then 'add a storage '.

  • Cannot export the patches downloaded by UMDS (v4.1)

    I've been looking at using UMD to download patches on a shared repository, but I fight with the step where the patches downloaded are exported. On a freshly built Windows 2003 server, I installed fine UMDS, download patches (using Vmware-UMD-D) has worked well, but when I try to export using 'vmware-UMD-E-export-store d:\ ". " (where the drive d:\ is where I want the patches export) I get the following error;

    C:\Program Files\VMware\Infrastructure\Update Manager > vmware - umds.exe - E - export-store d:\
    During the initialization of the downloadConfig.xml configuration
    [2011-02-04 22:06:14.323 01740 info "App"] Current working directory: C:\Program Files\VMware\Infrastructure\Update Manager
    [2011-02-04 22:06:14.323 01740 verbose "ThreadPool"] TaskMax = 10, IoMin = 1, IoMax = 21
    [2011-02-04 22:06:14.323 01740 info "Libs"] Using the libcrypto, version 9080CF
    [2011-02-04 22:06:15.103 01740 info "App"] Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000
    INFO - [updateDownloader, 132] begins to export the updates...
    ERROR - [UMDSHelper, 280] missing version1.txt file
    ERROR - [updateDownloader, 303] Version mismatch. Check the location of the patch repository is correct and the version of the hotfix repositoy is the last

    The version1.txt file exists in the root of the repository patch, like the file version.txt (as well as the directories hostupdate, metadata, and vm-patches).  It may not be an incompatibility of versions with Update Manager as I have not yet tried to configure to see the shared repository and yet, I am simply configuration UMDS himself. I have also tried to move the patch repository (using vmware-UMD--set-config--patch-magasin E:\) which moves OK but does not solve my problem. In looking at downloadConfig.xml the patch repository location is correct (E: /).

    Someone at - he saw this before or know what to try as a fix?

    Kind regards

    Ed.

    It's VMware.Please offer a valid folder name command should look something like this vmware-UMD - E - export-store e:\export-depot. Let me know if it works

  • Cannot install the ColdFusion Builder 2 fix

    I'm trying to install ColdFusion Builder 2 Hot Fix. At the launch of the InstallAnywhere program I get this message: cannot run the desired program. Please get another copy of the installer and try again. "Does anyone have a solution?

    Can you please rename the following Setup program, and then try to install?

    Adobe ColdFusion Builder 2 fix 1.exe

    Thank you

    Krishna

  • Cannot export the Error Message

    I get the following error message when you try to export a LR 4.1 using Windows 7:

    Unable to export:

    An internal error has occurred: error Win32 API 2 ("the system cannot find the file specified.") When you call ShellExecuteExW of AgWorkspace.shellExecute

    Has anyone else had a similar problem?

    Yes, a lot of people, especially when using first export in LR4. The problem is probably caused by the export of Post-Processing and after: the field being misinformed (by LR, and not by the user). In this box simply action valid, for example "do nothing" is fine, and the problem should disappear.

  • Cannot export the EPS or HAVE as TIFF

    Cannot export in EPS or HAVE as a TIFF. Error message that "combination of the size of the work and the resolution exceeds the maximum that can be rasterized.» But the work plan is only 50 cm x 5 cm B & W I use AI CS4. What should I do?

    Did you use guides or have what whether it of on the work plan and you precisely set the work plan use in the export dialog box. As far as script will, export in tiff format is not available, but the EPS option is.

  • Modeler cannot export the DDL for databases Oracle (only work for DB2 databases).

    Hello

    First of all, I'm sorry for my English, I'm French.

    I'm new with Oracle tools. I have my database with the DataModeler deisgned.

    Before that I've got my schema versioning I could export the schema to DDL Server Oracle 12.

    But since I have version control with Subversion I can only export to DB2 databases (screenshot follows):

    Exporting to Oracle databases?

    Thank you.

    Well, unzip to the new directory doesn't mean a new facility because it is the same version and DM will use existing preferences - you must remove the directory with the preferences. For DM 4.0.2.840 this directory on my Win7 is:

    C:\Users\\AppData\Roaming\Oracle SQL Developer data Modeler\system4.0.2.840

    After starting DM you must check "System Data Type Directory" "preferences > Data Modeler" - it should be empty or point to the directory with valid files - defaultRDBMSSites.xml and types.xml.

    Posted the picture shows that these files are correct or not existing in the directory defined in your preferences

    Philippe

Maybe you are looking for

  • Replace the files to download latest files on NB100?

    Just got the NB100 for my daughter and we both love to bits :)I did the update and it found 129 updates and after downloading, it asks me at various points if I want to keep a modified file or replace it with the new downloaded file.What should I do?

  • Cannot retrieve Hotkey Utility

    Hi all I can't extract Hotkey Utility found [here | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 5414 & selSh ortMod = 995 & language = 13 &

  • Satellite A205: Dynadock - how to connect to LCD TV with HDMI Cable DVI

    I recently bought this product and had a problem when connecting it to my LCD TV.I used an HDMI cable to DVI to connect to the TV. Only a small part of the display shows on the TV. I did all the settings on the laptop (Satellite A205) but it adjusts

  • VISTA on Atheros Chipset WiFi problems

    Hi all I just want to know how Toshiba laptop users (especially the Satellite L40 or specially Atheros chipset users) have a problem with Vista to see, linking, from WiFi. For me, the problem is around support Vista WiFi and some chipset for ex Ather

  • Windows vista says that another computer has the same ip number

    should windows features all disabled a bunch of them are turned off I think someone had remote access to my computer I can not turn on my windows defender and cannot uninstall my logitech webcam my children sharing files and folders via google is bet