Cannot fax Officejet Pro 8500 A909g; was recently sold by Verizon to switch to FIOS digital telephony

Similar Questions

• Just save - unwritten - digital fax on OfficeJet Pro 8500 A909g

  I have the HP OfficeJet Pro 8500 A909g. I have the HP Fax in Digital Mode defined so that incoming faxes are saved on the network folder. Currently, when a fax arrives, it prints the fax and stores a PDF version of the fax in the network share. I don't want it to do both. Just save. Do not print.

  Is there a framework where we can prevent printing to save on paper (and ink)? I'd rather just browse my incoming faxes into PDF and only those that I really need to print. I like the option to turn off printing of incoming faxes and just store them on the network share.

  I did... took a while, but it's very simple, then it worked. All what you need to do is:-

  1 using the screen on the printer

  2. press on the key (top, middle of the screen)

  3. press on the basic Fax Setup

  4. digital fax

  5 fax print

  6. and finally click on off

  THEY're as simple as that. I was looking through the settings for centuries until I stumbbled on it. The hardest part about this process for me was getting through my exchange server... quite the task.

• OfficeJet Pro 8500 a909g wireless connection problem

  I have a printer wireless OfficeJet Pro 8500 a909g.  My PC is Windows 7 (64-bit).  Recently, the printer wasn't working reliably and we took to reboot our router frequently at the same time.  Router problems seem to be solved because my PC at home and the work laptop are well connected and running.  However, the printer would not work last night when I really needed.  The documents would appear in the queue, but never reach the printer.  Today, I uninstalled all the software of HP using the CD of origin and reinstalled all the latest software and drivers from hp.com.  Of course, I rebooted the printer several times during this process.  Using the Network Wizard wireless via the screen of the printer, I am able to locate my SSID and enter the WPA key.  The printer confirms that it is connected to the network.

  If my computer and printer are both connected to the same network why can't the HP software locate the printer?  Whenever I try to run the installation/Setup program it tells me that there is no HP printer on the network.  As I said, this printer has worked on this wireless network in the past.  I also downloaded and run the scan HP and difficulty of the program to see if she could solve the problem without success.

  Any other suggestions?

  Well, what I'm going to make you, it's just a basic uninstall and reinstall the printer. I'll describe the steps and you are right, we can use the USB > wireless Assistant. You can access that by running the software after the installation of the USB. Here are my steps...

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3752459

  Install and let me know the result!

  In addition, here is how you set a static IP address: allocating an address static IP to your printer of HP Wireless - Windows 7 - YouTube

  Have a great day!
  

• HP officejet pro 8500 a909g driver for mac 10.10.3

  Hello

  I am not able to scan/print through HP officejet pro 8500 a909g 10.10.3 Mac.

  I think because of no proper drivers, scanning/printing does not work.

  What should do?

  Hi @pan1490,

  Welcome to the HP Forums!

  I understand that you cannot print or scan with your HP Officejet Pro 8500 a909g on Mac OS X 10.10.3 Yosemite to. And I'm happy to see it for you!

  To verify that your printer hardware is functional, you are able to make copies of the scanner glass? Copy of a multi-page Original.

  If you are able to copy, then I recommend to install this driver, HP v3.1 for OS X printer drivers, which is the only driver I know for this printer on Mac OS X 10.10.3 available. Please see this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005. How to scan without HP on Mac software.

  Hope this solves your problem and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• AirPrint on HP officejet Pro 8500 A909G

  Is it possible to use AirPrint on a HP Officejet Pro 8500 A909g? Thank you

  OK, so a solution of firmware is released. The PrinterShare software solution is awkward. You can print to a printer that is shared by a Mac or a PC, but who wants to turn on their computer, whenever you want to print from iOS device? Given that I and everyone using devices iOS want be able to print natively and directly on a wifi printer, there are only two options left. Either you buy a new printer AirPrint for a few hundred dollars or more, or you buy the Lantronix xPrintServer for $150.

  http://www.Lantronix.com/it-management/mobile-print-servers/xprintserver.html

  xPrintServer is the solution I finally chose. It works as advertised. Simply connect it to your router, connect the power cable, and it works instantly. Almost no network printer, wifi or not, is recognized by AirPrint. Select your printer and print. So sweet!

• Language assistance on OfficeJet Pro 8500 A909g

  Someone has changed the language on my OfficeJet Pro 8500 A909g.  Could someone give me indications of countdown through the menu options?  Start by clicking on the key? Beyond the key, it is all Greek to me, or in this case Chinese (I think). Thank you.

  I thought about it by trial and error.  Tap the key symbol.  Scroll all the way down; It's "Preferences".  Click on 'Préférences' and the first option on the next page is the "language".  Click on "Language" and then scroll down until you see your language.  English is the first on the list.

• New IPad airprint can't find the Officejet Pro 8500 A909g series with firmware DLM1FN1006BR

  The series Officejet Pro 8500 A909g with firmware DLM1FN1006BR is satisfactory airprint on the new IPad?  If not, is there any difficulty?

  No, your printer is not capable of AirPrint and can not be.  You can try other printing applications, like HP ePrint home & Biz.

• OfficeJet Pro 8500 A909g do not receive the correct IP address of the DHCP server

  Hello

  We have reconfigured our network to use 172.16.11.xxxx

  We have assigned our OfficeJet Pro 8500 A909g printers IP addresses by using DHCP reservations.

  After joining the wireless network, all our printers have an address of 169.254.xxxx.xxx.

  What Miss me?

  Thank you

  Christophe

  DHCP is still active on your router?  The printer must have active DHCP.

  169.254.x.x means the printer sees the router, but does not have a valid IP address to him.

• HP OfficeJet Pro 8500 a909g - print from somewhere outside Tray 1

  Hello

  I am a consultant and one of my clients has this printer.  He has a paper tray, 250 sheets.  There's also the feeder on the top where you can feed the things to scan or copy.

  When he wants to print checks or envelopes, to remove the tray, take the paper and put in controls.

  Is it possible to print these one other way or you have buy the 2nd tray accessory?

  Thank you

  Hey texaspete,.

  The automatic document feeder on top of the Officejet Pro 8500 A909g can only be used for scanning/copying.  The mechanism for the loader doesn't have a printhead to be able to produce printed documents.

  However, there is the possibility of obtaining a 2nd paper for the Officejet Pro 8500 tray.  HP no longer produces the paper tray, but there are 3 third-party suppliers who still carry the part.

  * The part number for the option 2 tray (tray of 250 sheets) is CB802a.

  Try Google search for this product number and you will find many options of different companies.  I hope this helps.

• HP Officejet Pro 8500 A909g: My printer is not wireless...

  Hello! I tried for three days to get my printer to print something. For some reason, my HP Officejet Pro 8500 all-in-One a909g is not printing.

  I tried to update the drivers to see if that was the problem, but for some reason that my printer is not connected to my HP laptop wireless. The connection for some reason any broke. Whenever I go to enter the WPA code (which is correct and yes I put it in place for WPA and WPA2 not) it keeps refusing to connect to my laptop.

  If someone could help me please, it is something that I really need for my studies and we just replace the ink and Printhead and cannot afford to replace really. Thank you!

  Hello
  Thank you to try the Wireless Setup Wizard.
  Seems strange that the printer is not able to connect to the home network.

  If your printer is close to the router, you can connect using an Ethernet (Lan) cable.

  You will still need to install the printer software when you do this so that the drivers are properly configured i.e. non-plug-and-play.

  Hope that helps!

• HP officejet pro 8500 a909g: print heads

  my printer has stopped printing in black ink, even if the ink level is more than half full.  Ran "clean print head" and he ran forever.  Still not printing or copying in black.  color copy.

  Hey @ahornplayer58,

  I would like to help you to solve the problem that you experience when you try to print in black ink of your HP Officejet Pro 8500 Wireless all-in-One Printer today. Thank you for troubleshooting that you have completed before reaching out for support, including. Right now, it sounds like you have a defective black cartridge or defective printhead. In this model of printer, you have two print heads. There is a printhead magenta and cyan and a black and Yellow Printhead. If a replacement black cartridge fails to resolve your printing delivers a replacement black and Yellow Printhead may be necessary. Saying that, there are still a few troubleshooting steps that we can try before replacing anything. Can I please you follow the steps below.

  To start, please click here to access the troubleshooting steps. Once the support document opens please run through the solutionand four Solution. This includes all sub-steps under the two alternatives. A print head cleaning may be run up to three times to resolution. If you make three Printhead clean nothing helps, please do not proceed with any additional cleaning ink is used to clean the print head system, and you will just be wasting ink if you want to go forward.

  If the problem persists, the next step listed would be to replace the black and Yellow Printhead. However, it is never a bad idea to first try a black cartridge.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP Officejet Pro 8500 A910 was not found.

  I have a HP Officejet Pro 8500 bought more just. After you have installed on a HP Pavilion m8100n desktop, everything works but the scanner. I get this message "The HP Officejet Pro 8500 A910 is not found". Spent 3.5 hrs on the phone with HP support, they think that this is a problem in microsoft software. If I uninstall and reinstall the HP software it will work until I restart the computer. I feel confident that all troubleshooting has been done with HP at this stage and not need to go further with them. I use Norton on the computer as well. Someone has ideas how to get this fixed a problem?

  Hi BradKeith,

  You can try to completely uninstall the printer and before you reaffirm the system try to download the drivers from the HP site and trying to install and check.

  You can also check if uninstalling and reinstalling the video card drivers solves the problem.

  Method 1:

  Step 1: Uninstall the drivers from programs and features

  a. click on start

  b. type appwiz.cpl in search, and then press ENTER.

  c. find the printer driver packages, right click and uninstall it.

  Step 2: Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall.

  Before restarting the system, try to install the latest drivers from the HP site and check.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4083969&LC=en&cc=us&DLC=en&lang=en&cc=us

  Method 2:

  You can temporarily disable the Norton Security software and the firewall installed on the system and check.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer.

• HP all in one OfficeJet Pro 8500 - A909g

  Upgrade to Windows 8.1.  When you print documents of several pages, the printer stops just randomly after several pages of the document.  And a pop-up error message appears.  Simply said "could not print... document name.  I have to re - that the print job (specific page #, usually 2 at a time).

  A ran Print & Scan Doctor several times (it found & fixed some problems with the queue status & Print), but problem persists.  Now it prints more than only 2 pages.  But it keeps randomly quit smoking.  Very frustrating because I work with large documents.

  Any other suggestions?

  Thanks for any help out there.

  Patti

  Hello Patti, there.

  Only, I stumbled upon your post on your Officejet Pro 8500 not to print all pages in a document for you. I noticed that you ran printing and scanning Dr. temporarily fix the problem.

  I suggest completely uninstall the printer software using a level 3 to uninstall and reinstall the printer on your system.

  Side note: complete a level 4 is only available if you don't have a computer HP or other HP device installed on your computer. A level 4 will remove completely all files in HP. If you don't have a computer HP or other HP device, level 4 is OK to run.

  Here are the steps and the tools I recommend:

  1. uninstall - HP Officejet software and driver removal utility

  (Run, extracted, and then select uninstall_L3)

  2. restart your computer manually if the uninstaller does not restart it.

  3. Replace with one of the following methods:

  Driver and complete software of HP Officejet Pro features

  HP printer install wizard for Windows

  Best wishes

• Impossible to uninstall Officejet Pro 8500 A909G Uninstaller resignations answer

  I tried to completely uninstall my Officejet Pro 8500 and it gets half way done before that uninstall fails and says that 'THE UNINSTALLATION program has QUIT REPLY'. I am running Windows 8.1 on a Dell XPS 15. I even tried a level 4 withdrawal, and I get the same error. I want to install of all traces of the software went so I can do a cleaning of my new Officejet 8600 Plus. I tried to uninstall it from the administrator account on my computer, but also my account which is also an account Admin I also received the same identical mistake try uninstalling on Windows my wife 8.1 tablet. I also tried copy the folder on the C: drive and running 7z there from there and has as well. I extracted the files of my more than 8600 and cancelled the actual plant, hoping to try an installation of level 4 of these files instead, but it seems that the new products do not contain the L4 uninstallation program. Help, please. Thank you, Jason

  Here are some steps to clean up the operating system.
  Then use the HP installation wizard to install the 8600. (disable any AV program b4)

  1. press on the Windows key + R on the keyboard to bring up the run menu.
  2 type programfiles enforcement, and then click OK.
  3 remove all HP/Hewlett Packard folders.
  4. press on the Windows key + R on the keyboard to bring up the run menu.
  5. type % programfiles (x 86) % in the field to run, and then click OK. This is for 64 bit systems only.

  6 remove all HP/Hewlett Packard folders.
  7. press on the Windows key + R on the keyboard to bring up the run menu.
  8. type %appdata%\microsoft\windows\sendto in the field to run, and then click OK.
  9 remove all HP/Hewlett Packard folders.
  10. press on the Windows key + R on the keyboard to bring up the run menu.
  11. type programdata % enforcement.
  12 remove all HP/Hewlett Packard folders.
  13. press on the Windows key + R on the keyboard to bring up the run menu.
  14. type regedit into the race field.
  15 remove all HP/Hewlett Packard folders and keys that you find. (backup the reg file B4)
  16. run Disk Cleanup in administrative tools

• Cannot install Officejet Pro 8500 A910 on the network in my laptop Windows XP

  
  

  Resolved, not resolved.

  I talked to HP technical support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the home edition) when networked through a router. It will install via USB. I uninstalled the program and reinstalled with only USB connected to clear all printer/scanner of network information. Product support claimed it would install through an ether net cable connected between the printer and the computer, but it does little good if you need internet access.