Cannot find device tab when log in to my account. Very frustrating. Should make things easier.
Trying to install office jet Pro e-all in one. When go into my account to hpconected.com can't find the devices tab very frustrating and annoying. Should have been more simple.
Hello and welcome to the HP support community!
peace3021 wrote:
Trying to install office jet Pro e-all in one. When go into my account to hpconected.com can't find the devices tab very frustrating and annoying. Should have been more simple.
If all goes well, the way you spelled the site above is just a typo. This is "hpconnected.com".
I just logged onto the site with my Tablet HP Slate 10 HD, and clearly, there are 4 tabs: home, Collections, Services and devices.
Don't know what to say, except try to clear your cache and cookies in your browser, and then close the browser, open and try again to load www.hpconnected.com !
Good luck!
WyreNut
Tags: HP Printers
Similar Questions
-
I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.
Can someone help me with this?
Thank you.
See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/
If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1
-
Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all programs of cloud 2015 but not PP2015. When I got this error, I had a mid-2012 Mac Pro running El Capitan 10.11.2 and an Apple ATI Radeon HD5770. You can't update the drivers with Apple, but El Capitan should have giving me the latest video drivers.
First try to open but after loading everything it errored out with the "can't find a video playback device adapted." A very cryptic message in my way of thinking. They mean the monitor, video card or what? In any case, I decided that I must have my video card, so I bought a 4 GB Nvidia GTX 970 MacCards.com card, put it in and got the latest drivers for it, than MacCards.com current guard. This resulted in no gain. Always the same result right along with the exact error even after loading the PP2015.
I reinstalled PPCC2015 yesterday and it still loads but never opens and gives me the same error. I feel like even if I bought a new MacPro and reloaded all software CC, I'd still have the same result. Very depressed of not being able to run the software I pay for every month.
In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.
In this folder, go to preferences and find the adobe folder.
Right-click on the adobe folder and click get info.
In the permissions section, & sharing, there are three names.
Everyone should say read & write beside them.
Open the lock, turn all to read and write.
Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.
Then relock the lock.
Now, go to your OS hard drive and click on users, your user name, Documents.
Find the adobe folder there.
Right-click on the adobe folder and click get info.
In the permissions section, & sharing, there are three names.
Everyone should say read & write beside them.
Open the lock, turn all to read and write.
Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.
The lock, the lock again.
Wait a minute. Then launch first.
This fixed it for me.
-
How can I fix the cannot find server error when you use Bing?
When I want to use Bing as a search engine, I always get an error message cannot find server. When the connection problem is diagnosed, the result is that there is not a problem with the connection. I get the same thing when I use the Google search engine. OT most of the time I'm successful search with Ask. I use Windows XP.
Hi MineMN,
· Did you do changes on the computer before the show?
· What web browser do you use?
If you are using Internet Explorer, follow these methods.
Method 1: Follow the steps in the article.
"Internet Explorer cannot display the webpage" error in Internet Explorer
Method 2: If you still face the same problem reset the TCP/IP stack.
How to reset the Protocol Internet (TCP/IP)
Method 3: Reset the proxy server. Follow these steps:
(a) click Start, run, type cmd , and then press enter.
(b) type the following commands at the command prompt and press enter after each command:
proxycfg d
proxycfg-u
-
Cannot find device write VMware esx server 3i image support to.
Hello
I'm fairly new Virtualization.
I downloaded: VMware ESX Server 3i Installable U4, Refresh Version 3.5 Update 4 | 153875-30-03-09 on the site and it burned on a disc. at the start of the disk and following the instructions in the installation guide, I get the following error:
The installation operation failed!
The installation operation has encountered a fatal error!
Cannot find device write VMware esx server 3i image support to.
The following system information will help the forum of VMWare support with your problem. Please note the information before proceeding.
Information System
Manufacturing: abandoned
Model: abandoned
Service etiquette: abandoned
BIOS Rev: SGP4510H.06A.0083.2008.0819.1026
OK, I can tell that you are new to this sort of thing, using windows XP, it is the best guide I have found for you should you walk through all the way.
http://www.Symantec.com/connect/articles/how-create-your-own-bootable-ESX-3i-USB-stick
-
Error 0 x 80070003 system cannot find path specified when you try to open the music folder
Original title: error 0 x 80070003
Opening of office music folder and clicking new folder, a new folder window appears and indicates "error 0 x 80070003...» the system cannot find the path specified. »
What should I do to make a new folder?
Thank you
Newby0
Hello
Thanks for posting this question in the Microsoft Community.
I'll certainly try and help you get the problem solved. Please provide us with some answers for a better understanding of the issue.
1. Since when are you facing the issue?
2 are logged as administrator?
3. where's the music folder? Located internal or an external storage device?
4. do you have an anti-virus installed on the computer program?
5. are you aware of any recent software or the hardware in the computer changes?
You try to open the file as administrator. Right-click on the file and select run as administrator.
You can also try to launch an online scan and check if that helps.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
You can also start the computer in safe mode and check if the problem persists. If the problem persists, you can start the computer in a clean boot state, and check if all third-party software may cause the problem. Clean boot helps eliminate software conflicts.
Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.
Hope this helps and provide us more information if you need more assistance. We will be happy to help.
-
SE error message: cannot find Splash.exe when you insert disk 2 Fable TLC.
Original title: Ive been game Fable TLC, I beat Jack of blades on disc one but when I insert disc 2, it comes up with cannot find Splash.exe idk what to do and I want to know what comes next.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi westcott2.0,
1 Windows operating system you are using?
If you use Windows 7, then it is not compatible with Windows 7.
See the link below for compatibility.
Step 1:
You can try to run the game in XP compatibility mode and see if you can run the game without problems.
For more information about executing a program in compatibility mode, see the following link.
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Step 2:
You can also try to install Windows XP mode and then install the game in XP mode and check if you can play the game or not.
You can view the following link to use Windows XP mode:
Install and use Windows XP Mode in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7
Note: Windows XP mode will only run in Windows 7 Professional, full and business
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
* Original title: problem with HP Laserjet 4350 PCL5
I have a shared network printer. But when connect us to another computer in the workgroup. It says that it cannot find the driver. Computer has Windows 7 64 bit. I tried my drivers and .inf files, but nothing works.
Hello
This problem may occur if the printer drivers are not installed properly.
I suggest you run the HP print and Scan from following link doctor and see if that fixes the problem.
You can try to install the last printing software, drivers from the following link and check if it helps.
For more information, see the links.
Problem for HP LaserJet 4350 printers
Install a printer on a home network
Keep us informed on the status of the issue.
-
6 iPhone bluetooth cannot find devices
Hello
I have an iphone 6, and when I turn the bluetooth it finds not all devices and is locked on the search for devices.
No idea how to solve this problem?
What types of devices are you looking for? Are you sure that these devices are in discovery/torque mode? Were you ever able to pair a Bluetooth device with the phone? This support document contains some troubleshooting steps for pairing Bluetooth devices. Set install and use third-party Bluetooth - Apple Support Accessories
-
Cannot find device 9163 using DAXmx 9.1.7
I'll put up the NI 9237 (for strain gauges) module using series C Ethernet ENET-9163 carrier.
I installed DAQmx 9.1.7 which must contain the correction of the impossibility of finding the device when other USB devices are installed. (I have an HP desktop with the mouse USB, keyboard, etc., always under Windows XP SP3)
When I run the Explorer measurement and automation (Version 4.7.0f4) and ask network devices to find NOR-DAQmx, nothing appears. The troubleshooting steps in the Getting Started Guide OR-DAQmx for NI WLS/ENET-9163 aren't useful. (I do not have a static IP address for the 9163, that's what I want to put in place; I do not have a DHCP server)
I created a 2nd ethernet connection on this computer using the Cables to Go USB 2.0 to Fast Ethernet Adapter, what struck me ServerD in many other projects for the creation of a private network to operate the data acquisition equipment. So I think that ethernet itself is fine.
What should I try next?
I did a factory reset, so it wasn't the issue.
I finally got to DAXmx 9.2.3 which has much better help text to put in place.
In my network setup where I have a separate private network, I had to use to allow it to choose an automatic IP address setting. (Normally I have created my own private, without DHCP ip addresses). Once I did it, and using 9.2.3 (I did both at the same time), I could find the 9163 and give him my own static IP address.
Then I turned on the network connection to fixed static and reconnected to the map now with its own static IP address on the same subnet as the network card.
So, all is well.
-
laptop tells me that it cannot find a certificate to log too
What is a certificate
What is a certificate
If you are a teacher, you should be able to ask better than that. Seehttp://support.microsoft.com/kb/555375
If I had to guess, I suppose you are trying to connect to a home wireless network and the box to "Enable IEEE 802. 1 x authentication for this network"is checked (do not).
- Open network connections (start > run > ncpa.cpl > OK)
- Right click on your wireless adapter icon and select Properties
- Click the wireless networks tab
- Select your network from the list of preferred networks, and then click "Properties".
- Click the Authentication tab
- Uncheck the box and OK your way out.
- You should not restart, but do it anyway, on general principles.
If that doesn't help - and if your question relates to a wireless home network - and then follow the above instructions until step 4, but instead click on 'Properties', click on 'delete '. Then go to the list of available wireless networks, find your network and click on connect. Enter the password when you are prompted.
-
Cannot set 'Security' tab when looged on as administrator
Running Windows XP Pro Service Pack 3, logged on as administrator.
Having problems connecting to a shared printer on this system and strives to verify permissions.
When I go to properties of the printer, there is no security tab.
Same situation when I try to check the Permissions on the files.
Why the Security tab is not visible.
The most likely cause is that the Simple file sharing is enabled. The Security tab appears only if simple file sharing is disabled.
"How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
<>http://support.Microsoft.com/kb/307874 >In the case of the tab security is missing for the files, the tab appears only if the drive that the file is on a been formatted to NTFS. (No security for FAT volumes tab).
Another way to check the permissions of file is to use the command "cacls" from a command prompt window.
HTH,
JW -
Scanner (Officejet 7500) cannot find the computer when you use shortcuts scan to printer
When you choose Scan to PDF, e-mail, etc., by using the scanning on the 7500 buttons it allows me to select the computer on the network (each with all of the latest drivers and software loaded). However when about to the scanner and then says the computer is not found (whatever the) despite them being on and ready. Scanning by any other method of the Mac works. Automator shortcuts work very well during the tests, but they do not seem to get initiated by the scanner for scanning form of initiation of the printer itself.
Research on the support site HP and conclusion - a 'connection error' or "Computer no. detected" Error Message displays when trying to Scan from the printer control panel - as a subject gives PC solutions, but nothing for Mac. And so here I am. Help!
JKB
The next thing to check is that "HP Device Monitor" is running. This background process is responsible for detecting the keys for scanning applications. If you open the activity monitor (located in/Applications/Utilities) you should see this class as one of the running processes.
It may be generally preferable for you to perform an uninstall and reinstall the HP software. You will find in Applications/Hewlett-Packard HP Uninstaller. Use this utility to remove the old software. I recommend that you download and install the latest version of the software for your 7500 here: http://tinyurl.com/4voly2d.
Hope this helps,
-
Satellite P100-347 cannot find devices with Bluetooth
Trying to get some devices connected through Bluetooth and I try to find the Bluetooth on a P100-347 district, but he isn't here. I used the BT stack on another machine and normally there is a Bluetooth Neighbourhood shown on the desktop, but not on my laptop.
I took a peek in the test system as well, but there is nothing there... where it is spent, and how do I get that back.
So I guess that you take on the 'interchange Information Bluetooth"which allows to Exchange files, vCards, and images with other Bluetooth devices. If so you can start it via the menu entry in the file of the Bluetooth program or by a right mouse click on the BT system tray icon and a selection of "Bluetooth information interchange.
Very old version also had an icon on the desktop for him. I think that it is version 3. Now, it is located in the District of normal network. To get him back on the desktop, you can do the following:
"- Mouse-right click on the Bluetooth-> Option... system tray icon-> Bluetooth information interchange-> click the radio button"Desktop"-> Apply-> OK.
That's all. -
find statistics network when logged in ssh on my ESXI Mng network interface
Hello
I would like to see some statistics on my ESXi Manamgnet port.
I want to see if I have errors on the network, etc. items.
I don't know how to do when I logged the management with SSH CLi
Help, please.
Thank you!
Dothan.
My sincere apologies. I tried in a 5.1 environment where the namespace is here. In addition, 5.0, I tested
ethtool-s vmnic0 to give similar data.
Maybe you are looking for
-
TCP ip has reached the limit of security imposed on the number of tcp simultaneous connect
Idle process original title: System, create tcp/ip connections to achieve maximum attempts allowed on win xpContinue to event viewer showing warning saying tcp/ip has reached the limit of security imposed on the number of tcp connect attempts simulta
-
Desktop icons removed keep reappear later.
There are no model when they reappear. I tried to uninstall those who have programs. How I remove them permanently?
-
My DVD RW drive doesn't detect program or music cd but will play a movie cd
My DVD RW drive does not detect the program, music or a blank cd but detects and read a movie cd. I tried uninstalling the driver and restarted my computer, looking for updated driver (said mine is newer), reset to default AutoPlay settings and nothi
-
problem after 8 updates for windows 8.1 windows
Hi I updated my windows 8 windows 8.1 but after all program in the menu icons START menu button disappeared. the start menu is now empty. Why is this? any way I can get it all back? thanxs in advance
-
So I had a few BSOD for a few months and I can't go and look at the files in drive C. I windows minidump dump tried to open but it says access denied. even though I am administrator has limited. Someone please tell me how to display the dump files, b