Cannot find field 'publication Date' in the music of file properties

Similar Questions

• Cannot insert field or paste into the existing local Variable (Boolean container)

  Cannot insert field or paste into the existing local Variable (Boolean container)...  TestStand 4.1.

  It is very strange, especially since I've done it before.

  'Paste' and "insert field" selections are grayed out and disabled in the context menu.  I tried everything I could imagine and tried various combinations of positions.  I'm sure it's something simple, bu redicoulously, I can't find the redicule to solve this annoying problem issue.

  The local variable is a container of Boolean.  It has 90 elements and I need to add one more.  I can not change / rename or do something with this Local.  Must be karma (for those who know me in the LabVIEW forum).  Usually, you do a right click, insert field and that's where...  Not this one...

  Anyone seen this before?  Closing and re-opening TestStand doesn't change anything.  There is a collection in LabVIEW that feeds the local section in TestStand.

  It is a container of data custm type.  To change flags are ok (edit is allowed).  Can't think of any other valuable information...

  He finds...

  It should be edited in the Data Types...  It was not automatic after reloading the prototype of LabVIEW.

  I knew it was something stupid that I didn't...  I became close... but had not sought far enough.

  I was looking at the range of Types, but not in the file of the sequence...

  

• Receive error message "cannot find volume of extraction" during the installation of products of microcoft"

  When I download... NET or windows install it downloads fine but when I click Run to install I get "cannot find volume of extraction" make sure you have the right permission. This does.nt occur on all facilities but it is in the Sub microsoft windows update installs and direct installs the Center.ce to download just started a few weeks ago and I tried everything in my power to correct without result.

  * original title - what is and solution to "cannot find volume of extraction" during the installation of products of microcoft? *

  Hi howardchampion,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/i-am-trying-to-install-Microsoft-Silverlight-and/920f7b7a-E926-47B5-acc4-e8dfbc548696

  I hope this helps!

• I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  When I twirl open the PSE12 option I see English. When the download is complete, you usually select the language when starting the installation.

• Oracle 11 GR 1 material on Windows Xp error cannot find J2SE SDK installed to the path

  When I type in the path to java.exe in SQL dev., I got error ' cannot find J2SE SDK installed to the path: C:\Program Files\Java\jre6. "when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I fix it? Installation of the database say it was successful

  Developer SQL must the JDK Java JRE not to operate successfully. Your path looks like a path for the JRE. There is a download of windows that comes with the Java developer kit.

  concerning

  Niall

• "Cannot find server" when connecting to the database homepage

  Until someone tells me to look at the other post on the first page of the forum with a similar title... I've already read through it. I also did a search of the forum, but I'm still stuck.
  
  Let me start by saying that I have almost no experience on one database other than writing queries. I installed Oracle Express 10 g today for I can have access to a development environment to test my queries on the sample data. After installation, it automatically opens a web browser, pointing to the URL: http://127.0.0.1:8080 / apex, the page could not be loaded (error Internet Explorer: "cannot display the page." and at the bottom of the page: "Cannot find server or DNS error"). I decided to restart my computer to see if that would make a difference. Then, I opened the link 'Start' in my Start menu in the new folder of Oracle. It instructed me to first of all, go to the home page of the database (with the same URL: http://127.0.0.1:8080 / apex), and the page still doesn't load. Based on the posts that I could find on the subject, I chose "Start Database" of the Oracle folder in my Start menu. In the command window that pops up, he says:
  

  C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
  The requested service has already been started.  
  
  More help is available by typing NET HELPMSG 2182.
  
  C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
  The requested service has already been started.
  
  More help is available by typing NET HELPMSG 2182.

  Then... It looks like the database and listener are already started, so I don't think that's the problem. So, I'm stuck. I am trying to access to this on the same computer, I installed it, and I don't plan any time in the future where I will need to access the database remotely because it is just a test environment for my personal use.
  
  The most recent post on this subject, I saw something to try to go to http://hostname:8080 / apex. And, forgive me if this sounds like a stupid question, but I guess I have to replace "hostname" in this URL with whatever hostname actually is... right? So, uh, how can I know what is the host name?
  
  Published by: user11033437 on April 15, 2010 13:18 (corrected to default URL)

  Well, looks like the answer to one of the previous questions, "isn't the database running" was ", not really" :(

  If there is no newspaper alerts, there no database, most probably the \oraclexe\oradata\XE\ does not contain. DBF files - try manual cleaning (remove registry entries, the Windows install cleanup, etxc.) following ALL the steps in the http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABFFJIB

  And check to make sure that your connection to the PC is in the local administrators group (domain administrator is not enough here) and run the installer... what version of Windows? XP? 2003?

• Cannot find preferences. Not in the toolbar, or anywhere else, I looked.

  Cannot find the Preferences/icon window via the toolbar or through other means. To change how cookies are managed for example, need to go in the preferences. Not a problem in the windows version.

  Hello jcoprs,

  to find the preferences on Mac, please go to

   Firefox > Preferences.
  

  See you soon!
  Tobbi-

• MAX cannot find two usb cameras at the same time

  Hello

  I want to use two cameras usb (Thorlabs DCC 1545 M) in NOR-IMAQdx in Labview, but it cannot find a single camera (the one plugged earlier), and also a single camera is shown in MAX. Both cameras working in the manufacturer's software, and if I unplug the 1 unit, the 2nd will be displayed in MAX after a refresh.

  I found that one camera is supported for each USB hub in Labview, and all USB ports in this computer correspond to a same hub online. I don't know if this is causing the problem.

  In fact, I need to take the picture in both cameras at the same time, a switch programmed between the two cameras will work for me.

  Any suggestion and comment will be appreciated.

  Hello Hosni,

  According to this link, you can acquire from multiple USB cameras simultaneously.  The limitation is on the manufacturer and how they interface with the bus of DirectShow.  When you use two cameras of the same make and model, it sometimes happens that not enough information is not IMAQdx to distinguish between the two cameras.  When you switch to MAX cameras, they come as different cameras, or they appear actually virtually the same?

  Since you said switching between them might work, I found an example that does just that.  Just make sure you give a name to each camera single camera.  I hope this will be useful for you.

  In addition, there is a bit of discussion on this topic on the forum of discussion already.  Check out these related threads, or use the search box to search for more.  There is much information available!

  http://forums.NI.com/T5/LabVIEW/multiple-USB-cameras-in-LabVIEW/m-p/833517

  http://forums.NI.com/T5/machine-vision/two-USB-camera-identification/m-p/2193960

  http://forums.NI.com/T5/machine-vision/synchronized-capture-for-multiple-USB-cameras/TD-p/1879647

  http://forums.NI.com/T5/LabVIEW/multiple-USB-camera-image-acquisition-using-vision-acquisition/TD-p/...

• Airbook cannot find HP6600 and CD in the configuration of the printer

  Once I have download CD intall the airbook still gives error saying that it cannot find the current driver, consult the manufacturing.

  Hello

  Please specify your operating system, as well the type of connection you use for the printer.

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Error message: (translated from Dutch) 'Cannot find corresponding style page for the query.

  Error message: (translated from Dutch) ' cannot find corresponding style page for media interview "(see picture).

  I can't find what the problem with this page: steun Yolaine

  This message does not appear on the other pages of this site...

  What I've done wrong?

  Thanks in advance!

  Martian

  

  There are two things that are probably the origin of this error.

  Line 22 in your HTML code looks like this:

  Hello
  
  I use push active-passive replication. When I add data in the active cache, the data added to the cache but get the error below during publish data on passive cache.
  
  03/11/31 22:38:06.014/291.473 Oracle coherence GE 3.6.1.0 < error > (thread = Proxy: ExtendTcpProxyService:TcpAcceptor, Member = 1): could not publish EntryOperation {siteName = site1, NOMCLUSTER = Cluster1, cacheName = dist-contact-cache, operation = insert, publishableEntry = PublishableEntry {key = Binary (length = 12, 0x154E094D65656E616B736869 = value), value = Binary (length = 88, value = 0x12813A15A90F00004E094D65656E61
  {{6B736869014E07506C6F74203137024E074368656E6E6169034E0954616D696C4E616475044E06363030303432401A155B014E0524737263244E0E73697465312D436C757374657231), originalValue = Binary (length = 0, value = 0 x)}} dist-contact-Cache Cache due to
  Java.io.StreamCorruptedException (packed): invalid type: Class: com.oracle.coherence.patterns.pushreplication.publishers.cache.AbstractCachePublisher 78
  2011-03-31 Oracle coherence GE 3.6.1.0 22:38:06.014/291.473 < D5 > (thread = Proxy: ExtendTcpProxyService:TcpAcceptor, Member = 1): an exception has occurred during the processing of an InvocationRequest for = Proxy Service: ExtendTcpProxyService:TcpAcceptor: (Wrapped: could not publish a lot with the [active Editor] editor on [dist-contact-cache] cache) java.lang.IllegalStateException: attempted to publish on dist-contact-cache cache
  
  Here is my file of xml configuration of cache coherence
  _________________________________
  ! SYSTEM cache-config DOCTYPE "cache - config.dtd" >
  
  < xmlns:sync = "class: com.oracle.coherence.patterns.pushreplication.configuration.PushReplicationNamespaceContentHandler cache-config" >
  <>- cached patterns
  <: pof-enabled synchronization provider = "true" >
  < sync: consistency-provider / >
  < / sync: provider >
  
  < cache-system-mapping >
  <>cache-mapping
  < name of cache - > dist-contact-cache < / cache-name >
  < scheme name > distributed-scheme-with-edition-dumps < / system-name >
  < sync: Editor >
  < sync: Publisher-name > active Editor < / sync: Publisher-name >
  < sync: Editor-system >
  < sync: remote-cluster-editor-system >
  < sync: remote-invocation-service-name > remote control-site2 < / sync: remote-invocation-service-name >
  < sync: remote-editor-system >
  < sync: local-cache-editor-system >
  < sync: target-cache-name > dist-contact-cache < / sync: target-cache-name >
  < / sync: local-cache-editor-system >
  < / sync: remote-editor-system >
  true < sync: autostart > < / sync: autostart >
  < / sync: remote-cluster-editor-system >
  < / sync: Editor-system >
  < / sync: Editor >
  < / cache-mapping >
  < / cache-system-mapping >
  < proxy-system >
  < service name > ExtendTcpProxyService < / service-name >
  < number of threads > 5 < / thread count >
  < Acceptor-config >
  <>tcp-Acceptor
  < address - >
  localhost < address > < / address >
  < port > 9099 < / port >
  < / local-address >
  < / tcp-Acceptor >
  < / Acceptor-config >
  < autostart > true < / autostart >
  < / proxy-system >
  
  < remote-invocation-plan >
  < service name > remote control-site2 < / service-name >
  < initiator-config >
  <>tcp-initiator
  <>remote addresses
  > the socket address <
  localhost < address > < / address >
  < port > 5000 < / port >
  < / socket-address >
  < / remote-address >
  < connect-timeout > 2 s < / connect-timeout >
  < / tcp-initiator >
  < outgoing-message Manager >
  < request-timeout > s 5 < / timeout request >
  < / Manager of outbound messages >
  < / initiator-config >
  < serializer >
  > class name < com.tangosol.io.pof.ConfigurablePofContext < / class name >
  < / serializer >
  < / remote-invocation-plan >
  
  < / cache-plans >
  < / cache-config >

  Thanks for the quick post. Please try to add "-Dtangosol.pof.enabled = true" to the active and passive server startup;
  and just to be sure to add "-Dtangosol.coherence.distributed.localstorage = true" as well.

  Mark J

• How to add data to the SD card file?

  I use OutputStream to write data to a file on the sd card.

  Before you start coding, I assumed that we can use a similar api seek() but I couldn't find a way to move the file position.

  is it possible to add data using OutputStream or any other method?

  FileConnection.openOutputStream (long byteOffset)

  byteOffset - number of bytes to skip from the beginning of the file when the positioning of beginning of the OutputStream. If the supplied offset is greater than or equal to the current size of the file, the OutputStream is positioned at the end of the file to be added.