Cannot find HP slimline s3750t drivers for sm bus controller, controller ethernet and WIFI
I bought a slimline s3750t a couple of years and recently formatted and installed Vista 32 bit disc. Everything works except the computer can not find the drivers for the standard 802.11 bg WLAN ethernet controller and SM Bus controller (they show the yellow exclaimation marks in Device Manager) I didn't find the driver update on the HP support site, but I need the real driver. Anyone know what it is?
Hello
First download and install the Chipset driver from the link below.
FTP://ftp.HP.com/pub/softlib/software10/COL25775/PV-66301-1/sp40863.exe
When it is installed, restart the PC.
Then, download and install this driver WLAN on the following link.
FTP://ftp.HP.com/pub/softlib/software10/COL25749/PV-66232-1/sp40868.exe
Again, once the installation is complete, restart the PC, then download and install the LAN driver below
FTP://ftp.HP.com/pub/softlib/software10/COL25747/PV-66228-1/sp40864.exe
Once the installation is complete, restart the PC and then check in the Device Manager.
Concerning
DP-
Tags: HP Desktops
Similar Questions
-
Cannot find HP slimline s5134sc drivers for WLAN
Cannot find HP slimline s5134sc drivers for WLAN
I belive I have install the chipset for the s5134sc driver, but can't find the drivers, Please HELP ;-)
Hello
You don't specify the operating system that you need to. This would help.
Have you identified the WLAN device in the device of the alphanumeric string PCI\VEN Manager yet? Right-click on the WLAN device and select Properties, and then use the drop down menu under properties to select hardware ID information.
If I were you, I would consider the upgrade of the mobile device to a half of the modern height with WPA2 security protocol and 802.11n broadband bandwidth. A 802.11b\g like the one your slimline network card has been delivered with doesn't have a lot of bandwidth. Consider Linksys and Netgear network cards. Remember that they must be halfheoght for a slimline PC like yours.
-
Cannot find the necessarily the drivers for my HP Pavilion 17 - F034NG for Windows 7 64
Hello. Seems to have a big headache to find the corect for my laptop (HP Pavilion F034ng 17) drivers for Windows 7 64-BIT. Can someone give a litle here help?
Thank you very much
Hello:
Sometimes it takes time for the screenshots clear censorship of HP.
These must be all the drivers you need for this model. Take those you need...
First install the amd chipset drivers and reboot. You want the first file on the Web page.
This will install the smbus and usb 3 controllers.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Then, install the beta amd radeon catalyst graphics driver.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...
Audio: Accept the agreement, download and install the driver for the second on the list.
Ethernet: DL and install the 3rd driver on the list.
Card reader (PCI Device): DL and install first driver on the Web page.
ProtectSmart (3D driveguard) if applicable: there will be a unit named unknown device if you need this driver...
Webcam:
Wireless: If your model has a Ralink WiFi card
Bluetooth: If your model has a Ralink WiFi card
-
Cannot find or download video drivers for Inspiron 531
Hi guys
System:
- Inspiron 531
- AMD Athlon Dual Core 6000 + 3.01 GHz
- Windows Vista 32-bit SP2
- NVIDIA GeForce 6150SE nForce 430
Earlier, the display on two monitors connected to my Inspiron (Dell 24 "& Dell 22") deleted and enter Power Saving mode.
Both screens are also connected to my XPS 8300 and they work very well with this system. I also checked the two cables and they work too.
The monitors are usually connected to my Inspiron like this:
- The 24 "monitor is connected to my Inspiron with a DVI - D to DVI - D cable
- The 22 "monitor is connected through a DVI - D to VGA cable (the slot of DVI - D on the PC to the monitor VGA slot)
However, if I run live of the Inspiron, its connected monitor VGA slot to works fine.
The display shows a screen of information who advised me to click OK to complete the installation of the "new" NVIDIA software I have automatic updates turned off and I certainly did not begin any procedure update.
Anyway, I clicked 'OK' and reconnected the monitors as normal to think everything would be ok, but they still do not work.
I had a problem not long after I got this PC when I updated the video drivers from NVIDIA direct - I could run basically only to screen at resolution 800 x 600. I contacted the Support technique Dell and they said, it would be best to always get the updates driver directly from Dell. I did this and the problem was solved.
I tried to find the relevant video drivers on the Dell site, but for some reason any my Inspiron no longer appears on my record details, only my most recent XPS. I tried to re - register, but I keep saying that my Service tag is no longer supported. I found anywhere else on this site where I can download the appropriate drivers.
So I'm stuck - ideally I want to download the drivers for my dual monitor Setup works as it was before. I tried to do a system restore, but I don't know if it will work. In fact, I cling to the wide trying anything in case I find myself accidentally disabling VGA, power supply, so I won't be able to do anything with my system.
Why Dell make life so difficult for someone who has purchased a product from them once his warrany has expired?
Thanks for any help.
What happens if you start in Mode safe? -Restart, and then press F8 before Windows starts to load and choose Safe Mode from the menu.
Assume correctly that it is an add-in PCI-e graphics card? A map is not... ??
You can try this:
- Power off, unplug
- Press / hold the power button for about 15 sec.
- Carefully reinstall the video card in its niche.
- Then remove the battery from motherboard and the power button press / hold again to ~ 30 sec
- Reinstall the battery (right-side-to the top) and see if it works now
NOTE: It may be a good idea to open BIOS setup (reboot and press F2) before trying the above. Copy down all the settings of the BIOS because the battery will reset the BIOS default settings. After reinstalling the battery, restart and press F2 and confirm that the settings match what you noted. Be sure to save changes before exiting the Setup program.
-
Drivers for sm bus controller and Bluetooth controller
Hello!
I've been reinstaled win 7 32 bit on my Compaq CQ58-350SM and sm bus controller, lack the bluetooth controller drivers. I tried to find the drivers but without results. Please help me
the id of the controller Bluetooth PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_0D11the ID of the controller bus SM PCI\VEN_1022 & DEV_780B & SUBSYS_1885103C & REV_14
PCI\VEN_1022 & DEV_780B & SUBSYS_1885103C
PCI\VEN_1022 & DEV_780B & CC_0C0500
PCI\VEN_1022 & DEV_780B & CC_0C05Hello:
Download and install the amd chipset driver and restart. You want the first file on the Web page.
http://support.AMD.com/en-us/download/chipset?OS=Windows 7-32
For the bluetooth driver, select the third model on the link below, then the second model in the list.
Select the driver page, operating system and download and install the Ralink Bluetooth software and driver.
Unfortunately the company support site is down right now, so you can try again later or tomorrow.
This is why I was unable to put just the link to the driver for you, but now you can do it yourself.
-
Drivers for SM Bus controller and PCI Simple communication controller
Hello dear friends,
PC model number is P6-2355IL
I need two drivers. Please take a look
1 - SM Bus controller
2 PCI Simple Communications Controller
I need them for windows XP Professional and windows 7 Ultimate
Both 32 Bit 64 n
Thanks to all in ADVANCE.
Sunil K. millien
Try to install the Intel Chipset:
-
J4R74EA: CANNOT FIND RT3290 W7 RALINK DRIVERS FOR HP 250 G3 (J4R74EA)
Hello
I'm crazy to find drivers wireless for the NIC in the subject, I found and tried several links to download in this forum but no one works.
Could someone help me please?
Thank you.
Damiano
Hello:
See this post and follow the instructions to manually install the driver I posted if auto installation does not work.
You will also need to install the driver bluetooth for this card if you have not already done so.
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1
-
I typed 'very' and 'very' if it has not been suggested. Really? This is something I thought would be easy to find in options, but it is not for a reason, maybe I'm blind.
Unfortunately you cannot add corrections for words that you spell bad regularly with the spellchecker of Firefox.
If Firefox does not have the correct entry in the context menu then it is not a lot you can do.
You can only use persdict.dat (add to the dictionary) to add words to it which are correct, but which are not present in the currently selected dictionary. -
I have trouble finding drivers for SM bus controller and bus universal controller. I don't know why they are not loaded on the hard drive or if they were at the same time, how or why they are missing today and, more importantly, where do I go to find these drivers? Your help is very appreciated!
Hello
1. What is the brand and model of the computer?
2. What is the accurate and complete error message you get?
2. don't you make changes to the computer before the show?I suggest you try the steps from the following link:
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems -
Driver for SM bus controller is not install
My hard drive of laptop DV6 - 6173cl failed. I replaced the (1 terabyte) hard drive with an older and smaller (120 GB) I still have an old HP laptop hard drive and reloaded Windows 7 (64 bit) OS. Still have a lot of disk space.
Other devices - SM Bus controller driver is not loaded and does not load when "update driver software" is requested. I tried to 'turn off' and restarted the system – still no driver.
I read something on identify the chipset and get the driver from the manufacturer-, but the instructions indicated to me the 'display' (Intel HD Graphics r) chipset, and comes under the graphics card in the Device Manager, as well as graphics Radeon (TM) HD 6770 M card. Both have working drivers.
I'm NOT a person tech in every sense of the word - I understand little or nothing of the workings and the interactions of these different elements.
I looked online inside the laptop for the drivers for SM Bus controller.
I can't find any help with everything I read, like say more just go and "update your driver.
Can someone help me?
Hello
Please use the followin driver for SM Bus controller:
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55095.exe
For video, the two work so please don't break them.
Kind regards.
-
How can I find Canon CP910 printer drivers for use with OS10.11.3?
How can I find Canon CP910 printer drivers for use with OS10.11.3?
Download the player package Cannon from Apple or get your driver from the Canon support site.
-
Where can I find that Microsoft signed drivers for Windows 7?
Hello. Where can I find that Microsoft signed drivers for Windows 7?
Can be a little more specific please, what driver do you need?
Drivers are usually better obtained from the website of the manufacturer of the specific device.
For more information, see - http://windows.microsoft.com/en-us/windows-vista/what-is-a-signed-driver (for Vista but fundamentally similar).
and - http://windows.microsoft.com/en-us/windows/what-is-driver#1TC=windows-7
See also - http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/how-to-attain-signed-drivers-from-windows-update/a9458e79-685e-4fe3-b0f4-9e9f83f99225 concerning a request for similar sounding.
-
Cannot find the WSDL service defined for the name of the service
Hello! I made that call on the other composite via MDS on a single instance. Everything works fine. I've deployed this composite 2 to another instance, updated MDS. And I got error in the composite test 1st 2nd call. You have an idea? Thank you.
EM error
" < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns =" http://schemas.Oracle.com/BPEL/extension "> < part name ="detail"> < could not find the service WSDL defined for the name of the retail service > {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1}. CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details > < / part > < a name = "summary" part > < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < Summary / > < / part > < part name = "code" > < null code > < / code > < / piece > < / remoteFault > < / bpelFault >
SOA-server - diagnostoc.log
Handle error message.
error while trying to process the message 'com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage '; the reported exception is: block cannot handle the exception.
failure of the block 'BpPrc0' to handle an exception of business for instance '350026'; reported exception is: faultName: {{http://schemas.oracle.com/bpel/extension} remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}
parts: {}
detail = < detail > cannot find the WSDL service defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details >
, summary = < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / Summary >
code = < code > < code > null}
This error exceptions thrown by the underlying routing system.
Contact Oracle Support Services. Provide the error message, the composite source and the trace of the exception in the log (logging level value debug mode) files.
This error was an exception that is thrown by the message handler.
Check the trace for the exception in the log (the connection value level debug mode).
ORABPEL-05002
Handle error message.
error while trying to process the message 'com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage '; the reported exception is: block cannot handle the exception.
failure of the block 'BpPrc0' to handle an exception of business for instance '350026'; reported exception is: faultName: {{http://schemas.oracle.com/bpel/extension} remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}
parts: {}
detail = < detail > cannot find the WSDL service defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details >
, summary = < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / Summary >
code = < code > < code > null}
This error exceptions thrown by the underlying routing system.
Contact Oracle Support Services. Provide the error message, the composite source and the trace of the exception in the log (logging level value debug mode) files.
This error was an exception that is thrown by the message handler.
Check the trace for the exception in the log (the connection value level debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:238)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:89)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:65)
to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:897)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:919)
to com.collaxa.cube.engine.dispatch.Dispatcher$ ContextCapturingThreadFactory$ 2.run(Dispatcher.java:933)
at java.lang.Thread.run(Thread.java:738)
]]
Hello
In the em console, against you call composite (I meant first composite), could you click on the "Show XML definition" (right next to the ' Show WSDL and endpoint URI) and see if correct endpoint URI is set up for the 2nd composite?
-
G7 2118nr drivers missing for SM Bus controller and universal serial (USB) Bus controller
I recently installed a new copy of Windows 7 ultimate (64 bit) on my g7 2118nr Pavillion. I can't not find any associated USB drivers for this laptop and I am having a problem of not being able to find drivers fo the SM Bus controller and controller Universl Serial Bus (USB). I tried Windows Update, the support page on HP.com and some froums (including this one). I'm finally throwing in the towel and ask for help fixing this problem. Thank you
Hello
Download and install the drivers for the AMD Chipset from the following link.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207
Once the installation is complete, restart the laptop.
Kind regards
DP - K
-
original title: Chess Titans
I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D. What's past and how to fix this. Thank you.
These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")
Maybe you are looking for
-
How can I copy my favorites without using Firefox Sync?
I'm not comfortable putting my personal information on an online server, which is what I do with Firefox Sync. Is it possible to copy my favorites on a flash drive, as we used to be able to do?
-
For Satellite Pro M70 boot sequence
Issues related to the: 1. What is the default setting for the boot to the Satellite Pro M70 sequence? 2. What is the procedure for changing the boot during the start-up phase sequence? 3. What is the most 'sensitive' boot sequence, with & without an
-
Black Qosmio F55 screen at startup
I have a toshiba qosmio f55 and nobody knows why sometimes when I reboot, I get a black screen, but windows is loading and hear the tinkling tune. It happens randomly. I have to unplug or hold down the power button. It must be a hardware problem beca
-
Hello is it possible to resize controls on a tab that is attached to a separator when you use the separator ('sizes splitter control' is selected). Splitter resizes only tabs itself, not the tab controls. Some controls to the tab, for example, disapp
-
He seems to be having trouble with mpr.dllI can't open the management console (services.msc)Paint or wordpad and I'm sure that moreerror message is 0xc000007btried to return a week on windows reset but no dicesomewhere, I am unable to find mpr.dllgiv