Cannot find option on the settings wpa wireless with sp3 on windows xp

I have a toshiba satellite pro that I adapted a new h/d, which came with xp pro with sp3.

I did all the updates and the system of microsoft verification says its perfectly up-to-date, but I can't select the option to choose wpa - psk for my wireless settings.

Before the old h/d failed I had to download sp3 from microsoft to allow this option that we had a new router that uses only wpa - psk and it worked fine, since the new operating system has been installed it will not allow it.

I found a download of microsoft specificallyt for wpa psk, but when trying to install windows indicates the update is older than the one already installed sp1, any ideas?

Hi,


Please refer to the below taken in charge provided Microsoft article and check if the steps help you solve the problem.
http://support.Microsoft.com/kb/870702

Tags: Windows

Similar Questions

  • Cannot find Activesync on the pc for use with pocket pc, need to sync PC to pda

    State of the instructions, click Start on PC, then click on programs, then select Microsoft activesync. There is no synchronization program in my list of programs

    Hello

    If you are using Windows XP SP2 or earlier, you can download ActiveSync 4.5 from the link below:
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=15

  • I can't find responsive personal option in the settings of the iPhone 5 s

    I found not reactive staff option in the settings.

    The option to activate and use the Personal Hotspot is carrying load. Your carrier must support it, and your account with them must be enabled. Your account will also require extra charges. You must also have a cellular data plan and turned it on. Check with your operator for more information.

  • Cannot find a driver for Belkin P81989A Wireless G Notebook Card Plus

    Cannot find a driver for Belkin P81989A Wireless G Notebook Card Plus

    Hello

    The link in my original post goes to a page with the title...

    F5D7011 high speed Mode Wireless G Notebook Network Card - software and drivers

    .. leastways he done for me. I had him via this page, which clearly shows a laptop slot adapter...

    http://en-UK-support.Belkin.com/app/product/detail/p/4440

    Tricky

  • Maven configuration cannot be applied: cannot find 'basicAuthScope' in the class org.sonatype.maven.wagon.AhcWagon$ __sisu1

    Using Maven 3.2.5

    on Mac OS 10.10

    with mvn--version

    akmac2:enpit-sample-hr-maven ak$ mvn -version
Apache Maven 3.2.5 (12a6b3acb947671f09b81f49094c53f426d8cea1; 2014-12-14T18:29:23+01:00)
Maven home: /Applications/Developer/apache-maven-3.2.5
Java version: 1.7.0_25, vendor: Oracle Corporation
Java home: /Library/Java/JavaVirtualMachines/jdk1.7.0_25.jdk/Contents/Home/jre
Default locale: de_DE, platform encoding: UTF-8
OS name: "mac os x", version: "10.10.1", arch: "x86_64", family: "mac"


    Following the documentation to configure repository maven.oracle.com on http://docs.Oracle.com/middleware/1213/core/Maven/config_maven_repo.htm#MAVEN9010

    my settings.xml

    <servers>
..
 <server>
    <id>maven.oracle.com</id>
    <username>myOTNMailadress</username>
    <password>bla</password>
    <configuration>
      <basicAuthScope>
        <host>ANY</host>
        <port>ANY</port>
        <realm>OAM 11g</realm>
      </basicAuthScope>
      <httpConfiguration>
        <all>
          <params>
            <property>
              <name>http.protocol.allow-circular-redirects</name>
              <value>%b,true</value>
            </property>
          </params>
        </all>
      </httpConfiguration>
    </configuration>
  </server>
  </servers>

<profiles>
 <profile>
      <id>oracleProfile</id>
      <activation>
        <activeByDefault>true</activeByDefault>
      </activation>
      <repositories>
        <repository>
          <id>maven.oracle.com</id>
          <url>https://maven.oracle.com</url>
          <layout>default</layout>
          <releases>
            <enabled>true</enabled>
          </releases>
        </repository>
      </repositories>
    </profile>
  </profiles>


  <!-- activeProfiles
 <activeProfiles>
    <activeProfile>oracleProfile</activeProfile>
  </activeProfiles>

</settings>
| List of profiles that are active for all builds.

    Get the following Exception all build a simple ADF 12.1.3 project. with mvn compile

    ....

    [DEBUG] use connector BasicRepositoryConnector with priority 0.0 to https://Maven.Oracle.com with username = myOTNEmail, password = *

    Download: https://Maven.Oracle.com/com/Oracle/ADF/library/BC4J-runtime/12.1.3-0-0/BC4J-runtime-12.1.3-0-0.Pom

    [WARNING] Could not apply that configuration for maven.oracle.com to the car org.sonatype.maven.wagon.AhcWagon$ __sisu1:could not find 'basicAuthScope' in the class org.sonatype.maven.wagon.AhcWagon$ __sisu1

    org.codehaus.plexus.component.configurator.ComponentConfigurationException: cannot find 'basicAuthScope' in the class org.sonatype.maven.wagon.AhcWagon$ __sisu1

    at org.eclipse.sisu.plexus.CompositeBeanHelper.setProperty(CompositeBeanHelper.java:252)

    at org.codehaus.plexus.component.configurator.converters.composite.ObjectWithFieldsConverter.processConfiguration(ObjectWithFieldsConverter.java:101)

    to org.eclipse.aether.internal.transport.wagon.PlexusWagonConfigurator$ WagonComponentConfigurator.configureComponent (PlexusWagonConfigurator.java:102)

    at org.codehaus.plexus.component.configurator.AbstractComponentConfigurator.configureComponent(AbstractComponentConfigurator.java:43)


    See also

    https://JIRA.codehaus.org/browse/wagon-422

    What is interesting in this issue of CAR-422 is: affected Version 2.8 / Versions of difficulty: 2.8


    Any ideas? Very disappointing up here the 'Oracle Maven Experience '.


    BR

    Andreas

    Hello

    It sounds like a question that we should already have set by which the parent pom com.oracle.maven:oracle - common: 12.1.3 - 0 - artifact 0:pom has the extension of car-ahc Sonatype configured (we did our test in early retirement with this car).  I just looked at the https://www.oracle.com/content/secure/maven/content/com/oracle/maven/oracle-common/12.1.3-0-0/oracle-common-12.1.3-0-0.pom

    and have verified that the extension pulling in the wagon-ahc is not there.  I am very interested to understand what is pulling in an extension of the wagon-ahc and remove for you get the appropriate wagon-http wagon.  Feel free to contact me privately so that I can get more information from you.  My email address is robert patrick at oracle dot com dot

    Please note that FMW 12.1.3 out initially using Maven 3.0.5.  While most of the plugins works without using Maven 3.2.5, changes you might encounter problems with a few plugins because of the disruptive changes made in Maven 3.1.0 when they passed their implementation of Ether starting from Sonatype to eclipse (which broke a lot of existing Maven plugins).

    Thank you

    Robert

  • Why can't see CarPlay as an option in the settings on my 6s 9.3.2?

    I have two two 9.3.2 of the identical 6s, there CarPlay option in the settings and there is no.

    Someone knows why?

    I have two two 9.3.2 of the identical 6s, there CarPlay option in the settings and there is no.

    Someone knows why?

    The iPhone that does not has any form of restrictions on it?  It is possible to restrict the use of CarPlay.

    SCR

  • BlackBerry Smartphones Runtime error "Cannot find system in the file table.

    I need help!

    I have a Blackberry Curve 8310 and have recently installed Version 4.5

    I'm trying to set my synchronization.  I followed the steps to set up my Outlook 2007 calendar.  He told me congratulations! You have configured the product. However, when I press Finish, I get a runtime error "cannot find system in the file table.

    I uninstalled the program and reinstalled - the same error.

    Any help would be appreciated!

    FIGURED IT OUT!

    The following steps, which are displayed on the RIM support will work; However, I had to do it another way.  In step 1, it says that ilxolkCompanion.fil is located in the path C:\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector... However, when I searched this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector.  (Maybe it's because I upgraded from 4.2.2 to 4.5 w/o filling a clean uninstall... not too sure why)

    Once I located the file via the command prompt, I have not recorded in accordance with the instructions of step 1.  I then followed step 2 exactly Word for Word... and VOILA!  I have now Version 4.5, working with MS Outlook 2007

    Resolution

    If the connectors folder is always present in C\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:

    1. Unregister the old of the Microsoft Outlook ilxolkCompanion.filconnector.

      1. Open the command prompt.
      2. Navigate to C:\Program research in Motion\BlackBerry\Connectors\MS Outlook Connector.
      3. Type command regsvr32 u ilxolkCompanion.fil.
      4. In Desktop Manager, Microsoft Outlook is no longer appears as an available desktop application.
    2. Save the latest Microsoft Outlook Connector.
      1. Navigate to C:\Program research in Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
      2. Type the command regsvr32 msoutlookconnector.fil.
      3. Office Manager, Microsoft Outlook will be now stored as an available desktop application.

    Once these steps have been completed, configure synchronization again.

  • Computer cannot detect the receiver of wireless Xbox 360 for window controller.

    Hello Microsoft,

    After I have tool on my computer for cleaning, the receiver of wireless Xbox 360 for window controller is not detected when I tried to plugged into computer. I have already downloaded new version 1.2 which is supported for Win 7 (64-bit). It still does not work. I tried to go to an another USB 2.0 but it's the same thing. Please help me. Thank you.

    Hello
     
     
    1. are you able to use the USB ports with other devices usb successfully?
     
    2. What is the status of this device in the Device Manager?
    See the links below for help on Device Manager.

     
    You may need to reinstall the hardware on your computer. To install the software by downloading it from the Internet
    a. go to the download section of website material Microsoft game software by following this link:
    http://www.Microsoft.com/hardware/download/download.aspx?category=gaming&type=gaming
    (b), select the type of product, select controller.
    c. in, select your product, select Xbox 360 Wireless Gaming receiver for Windows.
    d. in, select your operating system, select the version of Microsoft Windows you are using on your computer.
    e., select your operating system language, select the language used by Windows on your computer.
    f. click OK.
    g. click the link to start the Setup program.
    h. click on run.

    Xbox 360 accessories Setup installs the necessary files on your computer.
    Note: You may be prompted to restart the computer.

    You can also check out the article below which explains how to install this equipment.
    How to connect a wireless Xbox 360 controller or headset to your computer
    http://support.Xbox.com/support/en/us/NXE/KB.aspx?ID=933710&lcid=1033&category=hardware
     
     
    Hope this information was useful.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • "cannot find accespoint in the trial _crtCreateSymbolicLinkW in the file." DLL C:\WINDOWS\SYSTEM32\MSVCP110.dll."?

    I installed CC2015, Ps and Lr as a trial. As well as the Ps 13 elements trial.

    Installation goes well, Ps a Lr test started, but I can't open one or the other.

    When I go into the program files and open the applications from there, or I use the desktop shortcuts, I get an error "cannot find accespoint in the trial _crtCreateSymbolicLinkW in the file.» DLL. C:\WINDOWS\SYSTEM32\MSVCP110.dll ' (Dutch translation)

    Both Lr and Ps give the same error, only difference is the header indicating either 'Photoshop.exe - accespoint not found' or 'Lightroom.exe - accespoint not found. "

    Cannot download Jpeg or PNG images for some reason any (banned types of images)?

    PS Elements 13 starts in a small dualwindow who wants to open the library (left) or the editor in a trial (right), 13 items Ps starts and then crashes, the library opens if chosen.

    I tried to - and re - installing everything several times. Chat contact who gave me a subscription paid as a solution.

    However, I can't start any application Adobe 2015. even the trial of 13 elements Ps crashes at startup, after that he asked me to begin the trial.

    So Ps and Lr do not say expired test, in CC-Startup-tab it says 29 days left (in my tests), never gave the Apps tab "starting the trial" - buttons and only see the 'buy now' - buttons...

    Someone an idea?

    I use an i7Q820, 8 GB of RAM, Windows 8.1 computer.

    Tried to install with or without programs AV and firewall.

    Can I just clear and clean with cleaner creative cloud and start over?

    Lost some faith in software already from tent to install a trial already cost me more than half a day with no application of work so far and the proposed solution is a paid subscription where I've never seen a 'trial-expired-window', an open application or any place to put a key in.

    Thanks in advance.

    Eric

    First of all, let me write the correct translation of the error message, so everyone can find it, and sorry for my poor old translation, it should be;

    "Photoshop.exe - Entry Point not found", and "Lightroom.exe - Entry Point not found".

    "The entry procedure point not found _crtCreateSymbolicLinkW in the C:/Windows/System32/MSVCP110.dll dynamic link library."

    The solution is simple...

    This is a problem in Microsoft Visual C++ 2012, I found my answer in this post;

    Photoshop Entry Point not found

    My solution has been/is;

    Control Panel > programs and features (Add/Remove Programs) > first look for Microsoft Visual C ++ 2012 x 64 > right click > change (not remove/uninstall).

    A window pop up > choose repair

    The Microsoft Visual C ++ 2012 will be fixed x 64 > finish

    Then look for Microsoft Visual C ++ 2012 x 86 > right click > edit (not remove/uninstall).

    A window pop up > choose repair

    The Microsoft Visual C ++ 2012 will be repaired x 86 > when finished it will ask a reboot/restart.

    After normal restart of Photoshop, Lightroom and 13 started Ps elements and asked if I would continue my trial period.

    All applications work normal.

    A shame, I lost 2 days on Ps a Lr looking for this simple solution.

    I hope this will help others in the future.

  • VMware Player 5 - Tools - «Cannot find component on the server to update...» »

    While creating a new virtual machine in VMware Player v5.01.1 (build 894247), for Windows 8 Professional, I met an error saying "cannot find component on the update server.  Contact VMware support or your system administrator.  However, the creation of the VM continued, and the new Win 8 VM apparently working properly.

    However, if I now try to install VMware Tools, I get the same error.

    For the Windows hosts running VMware Player 5.0.1 build 894247:

    Install VMware Tools ISO image on Windows host, download host and "détarer" and then run.  Then silently installs the VMware Tools ISO Image in the working directory.  If VMware Tools not normally install in the virtual machine then manually assign the target VMware Tools ISO Image on CD/DVD to the virtual machine and install manually.

    ====================

    For the Linux hosts running VMware Player 5.0.1 build 894247:

    To install VMware Tools ISO Images on the host Linux see information in my answer Re: WS 7.1.4 - impossible to download VMware Tools/upgrade to update to install on the Linux host.   Then if VMware Tools will not install normally in the VM and then manually assign the target VMware Tools ISO Image to the CD/DVD from the virtual machine and install manually.

  • Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window appears A Pro XI upstairs and Pro XI is insta

    Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window A Pro XI upstairs and Pro XI is installed. And is NOT in the drop-down list to select a Pro XI product.  What is going on?

    The product 'calling' is your old Acrobat - 9 or X. You need the serial number of this old version.

  • Cannot connect iphone or android smartphone residential wireless. PC running windows 7.

    Cannot connect iphone or android smartphone residential wireless. PC running windows 7. tried to use wep and wap without help. Use the belkin router. have a red symbol blinking on router during a connection attempt. No permission on the phone message.

    Hi MarvinCohen,

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem, you want to establish a connection to homegroup between Windows 7 devices and iphone or Android.

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    A homegroup is a group of computers on a home network that can share devices such as Printers and libraries (Documents, photos, music and video libraries). PCs must be running Windows 7, Windows 8, Windows RT or to participate in a homegroup.

    Using a homegroup allows for easier sharing, but if you want to connect the phone then unfortunately, I must inform you that you can not connect mobile phone or android device to a homegroup connection.

    See the article for more information.

    Home Sweet homegroup
    http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

    Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with to join the homegroup, I'll be happy to help you. We, at tender Microsoft to excellence.

  • Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

    Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

    For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

    See you soon,.

    GB

  • Photos in the camera roll on 'iPhone' cannot be imported because the iPhone is locked with a password or read

    6 + put iPhone updated to 10.0.0.2 and now get the error, the pictures on the Filmstrip on "iPhone" cannot be imported because the iPhone is locked with a password or read. You must enter your password on the iPhone to view and import them.

    Working solutions proposed so far. Guess I'll have to wait for the correction of a bug to Apple...

    iPhoto 11 (9.2.3); OS X 10.6.8

    On the alert to "trust this computer" on your iPhone, iPad or iPod touch - Apple Support

    LN

  • After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

    After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

    Hello Siegmud,

    Wende Dich wie oben und some showers a cat den, denn

    Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

    Hans-Günter

Maybe you are looking for