Cannot find switchable graphics mode in the bios.

Similar Questions

• Managed to install XP Mode but cannot find "Windows XP Mode" in the folder "Windows Virtual PC" and also cannot find any file with the extension of the vmc

  Dear friends,

  I'm using Windows 7 Ultimate 64 bit

  I'm really happy with the answers given on this subject, but after the installation of "WindowsXPMode_en - us.exe" and "Windows6. 1 - KB958559 - x 64 - RefreshPkg.msu ".
  installation went well but I can't find any file on my computer with vpc extension, and I don't see the Windows XP Mode folder in Program Files.
  When I try to reinstall, I get the message that it has already been installed.  In folder options, I enabled see all files including system files.
  Thank you!

  Thank you very much!!!

  After I posted the question (and struggled with the issue for a while),
  I decided to uninstall Virtual PC and XP Mode, and then when I reinstalled
  them everything was fine.
  In any case thanks for the elaborate and useful response which I'm sure
  others will benefit from it.

• Option of switchable Graphics Mode not found in BIOS on the dv6-6026TX, even after the sp54024 update

  After the update to sp54024 and goes to bios f10, in the configuration of the system, I can't find an option that allows me to change the switchable graphics mode. The only options are something on virtualization, leaving the fan on etc, but nothing graphic...

  I'm portable is a dv6-6026tx.

  FYI, the option to change from dynamic to fixed option is available on laptops with Switchable Dynamic graphics. Your computer laptop dv6-6026TX has fixed Switchable graphics, and that is why you are not able to find this option in the BIOS.

  You can read more info here

  http://support.HP.com/us-en/document/c02731962

  The possibility to change the dynamics Fixed in BIOS update applies only to the 6100 dv6 and dv7-6100 Series Notebooks.

• That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  My computer is having problems when I bought all first it was from another provider which came as a set overclocked PC up the unit everything needed had to be put in my case & add existing hard drives & DVD etc. readers added on the implementation. I used the same location for more than 10 years before that I always built them myself I can build a good setup computer I correspond to different parts inside each other, and then he tested & sent.
  Unfortunately, the store has closed & the owner is sick cannot get their hands on him more & I had to get some add on things like new SSDS & some other bits in my system & the young boy said he would could do this job, but everything went wrong & I lost all new so I decided to recycle me like I used to do it before windows 7-64 came out I was going through a rough patch with me being paraplegic in any case it is difficult to build a new PC, so I chose this store & their confidence that went wrong now & I've been research & learn to catch up with the new technology, I do what I do anyway.
  Thing is my system is never one that you can purchase a manufacturer & I left it with the young boy & it came out all memory & was not necessary but of course upset of that ruined the setting completely overclocked so I did it myself & I got the work faster than ever, & quieter PC I just got the score that he had now , so I'm happy with it, but the names I came across while overclocking I came across that I'm not average or really lot as were dealing with Fast CrossfireX DDR RAM 1600 MHz.
  Please don't tell me that I should not be messing around with what I made since 1989 & made great strides in how everything works, I am not aware about this sort of thing I know SATA what it is & done, but those responsible for setting came from the part of overclocking in the BIOS I put then correctly , but I wanted to know what they represent in more depth. Thanks to anyone who can put me wise on these 3 points only. Malcolm.

  I'm pretty sure that you are on the wrong "forum" for this type of topic. This forum is designed as a support Pro-type Surface ultrabook/tablets and tablet-like Surface.

  That said,

  AHCI - Advanced Host Controller Interface - this is a hardware mechanism that allows the software to communicate with the devices Serial ATA (SATA). It offers features such as connecting hot and native command queuing (NCQ).

  IDE - Integrated Drive Electronics - IDE is basically the 'old' version of AHCI without connection to hot and NCQ. (It is usually used during the era the Parallel ATA (PATA) hard drives)

  Now. Mode AHCI and IDE mode - what is - this? IDE mode is to give you the greatest compatibility with older operating systems. AHCI is as I mentioned above, a modern version of the IDE - use the AHCI mode if you are running recent operating systems (Windows Vista + and Linux kernel 2.6.19+).) IDE mode will allow you to connect older operating systems with SATA drives.

  As I mentioned above, SATA is Serial ATA and the replacement of hard drives Parallel ATA (PATA).

  RAID - this is a storage technology where combine you multiple disks in a unit of 'single', depending on the mode, there may be RAID-0 and RAID-6 and each with different hard drive configurations. I will explain the simple examples: RAID-0 , which is the distribution but no parity or mirroring, this means that there is no data redundancy, if there is a failure on a disc, it will cause the loss of data on the entire RAID array. Ex: You 0110 as writing the data, 01 goes on disk 1 and 10 goes on disc 2, allowing a faster data read/write access.

  RAID-1- This is the opposite of RAID-0, which is mirrored without interlacing (no parity or the other). Basically, this means that you have an exact clone of disk 1 disk 2 disk 1 failure.

  RAID0 + 1 is that both RAID 1 and 0 is, IE interlacing (write data simultaneously to two [or more]. disks more mirroring failure) the minimum amount of disks required for this type of installation is 4 IDENTICAL drives.

  There is also RAID 2, 3, 4, 5, 6. That is just more implemented different configurations of distribution/parity/mirroring on disks.

  That being said, your RAID mode will allow you for some type of RAID configuration, if you choose to do so.

  Supplement: Many SATA controllers can enable AHCI separately or in combination with RAID support. Recommend Intel choose RAID mode on their motherboards, allowing also the AHCI, rather than AHCI/SATA mode for maximum flexibility (in the case that you ever want to build a RAID array), because there are a few problems that occurs, usually BSOD, when you choose a different mode once an operating system is already installed.

• Receive error message "cannot find volume of extraction" during the installation of products of microcoft"

  When I download... NET or windows install it downloads fine but when I click Run to install I get "cannot find volume of extraction" make sure you have the right permission. This does.nt occur on all facilities but it is in the Sub microsoft windows update installs and direct installs the Center.ce to download just started a few weeks ago and I tried everything in my power to correct without result.

  * original title - what is and solution to "cannot find volume of extraction" during the installation of products of microcoft? *

  Hi howardchampion,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/i-am-trying-to-install-Microsoft-Silverlight-and/920f7b7a-E926-47B5-acc4-e8dfbc548696

  I hope this helps!

• I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  When I twirl open the PSE12 option I see English. When the download is complete, you usually select the language when starting the installation.

• Oracle 11 GR 1 material on Windows Xp error cannot find J2SE SDK installed to the path

  When I type in the path to java.exe in SQL dev., I got error ' cannot find J2SE SDK installed to the path: C:\Program Files\Java\jre6. "when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I fix it? Installation of the database say it was successful

  Developer SQL must the JDK Java JRE not to operate successfully. Your path looks like a path for the JRE. There is a download of windows that comes with the Java developer kit.

  concerning

  Niall

• Cannot change SATA RAID in AHCI mode in the BIOS.

  Hi, I use Pavilion p6142p Desktop, WIN7, a harddsik.  The SATA BIOS has been set to RAID by the default value of the factory.

  I put two new hard drive in this office, they have different sizes and different rpm speed, I don't want their RAID.  So I tried switch the BIOS SATA AHCI mode, so I can't start the win7, win7 gave me two choices: repair or return, repair is not too.  After I change the BIOS, everything is OK.

  But I have to put all three harddisk in this office. So my question is:

  I use RAID in this PC?

  Do I have to re - install win7?

  ....

  In any case, what should I do?  Thank you.

  d1ad1a,

  RAID will work with unlike devices.  You can always install your new discs and give it a go.

  It seems that the ugly way is going to be your only for the ACHI mode to work. Alternatively, just live with what you have.

• Switchable graphics or in the power saving mode by default

  So, I'm having some not if funny issues with first pro. Today, while trying to edit a video, I noticed that, while trying to read anything in the timeline panel, audio would be read only, and the video in the window of reference would update only after I stopped the video. I use a Samsung series 7 times with AMD Radeon HD 8770 M graphics card and a GPU of 4000 Intell. The problem is when I go in Center of Catalyst to change settings, it is locked on the energy saving mode. I went and changed the name of the executable file for Adobe Premiere Pro CS6, which then allowed me to pass the program in high performance mode, but the same effect was still present. After a lot of research on the forums, I came across an adobe representative who suggested to try opening GPUSniffer in the directory Adobe\Adobe first Pro CS6\. and he ran. This is the screenshot I got when running it in command prompt, so my question is, does it perform a work around? Originally, when I bought this laptop 2 years ago, I have used the first pro without any problems like that. Yes, I would get occasional lag from time to time when there was a lot of effects and things to display in the timeline panel, but it was never as bad, until I had to change the hard drive due to a hard drive failure. The only thing different on this laptop is now than the hard drive itself, which has 1 TB more than the previous. It is still a samsung, and I can assure any and all other programs (which I use) that use graphics cards, use the AMD Radeon HD M 8770. First seems to be the only adobe with this problem product.

  Ridicule me. I found the solution. When I went to open a display window for which was planned on the timeline, I opened the resource monitor, instead of the program window: sequence. When I open program: sequence, the video would be read very well. Thanks for your time, will hide in the nearest corner.

• Yet of the Smartphone blackBerry cannot find Netowrk selection Mode Option

  I posted earlier for help to put in place a manual scan for networks.  A response suggests the following: manage connections > Mobile Network Options > network selection Mode

  Thanks - but it does not help.

  When I go to manage connections > Mobile Network Options > I see only three lines, as follows

  Data services on

  AT & T mobile network

  Mode of the network 3G & 2 G

  If I click on "Mobile network", it brings up a menu with:

  Copy

  Diagnostic test

  Tools (> Ding or DNS Lookup?)

  Full menu > copy; Diagnostic test; Tools; Switch application

  'Network selection mode' dores not appear anywhere.  So, I'm also perplexed than ever.

  Any other suggestions would be appreciated.  Thank you

  Hey Pierre, actually update your software would be a very good idea, you can use on your pc Desktop Manager to backup all your data, then check new software unit (Office Manager) and after your update, restore your back upward.
  Tell us how it works for you.
  Good luck.

• Switchable Graphics - mode for Pavilion m6-1009TX fixed?

  I just bought a Pavilion m6-1009TX who has switchable graphics (Radeon HD 7760 m). Is there a fixed mode? I've updated the BIOS but does not appear.

  I also have a Pavilion dv6 (w / a Radeon HD 6770 m) that I managed to put in mode fixed (flashed BIOS)

  I hope / expect M6 would be the same

  Hello

  Please check using the following link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c02731962&JumpID=reg_R1002_USEN

  Kind regards.

• Dell Inspiron R17-cannot switch Switchable Graphics

  Hello

  I recently received a Dell Inspiron R17 SE (7720). Initially, it came with Windows 8, but given that I don't like that much, I installed Windows 7. I installed all the drivers from the Dell Support Web site. Now, I have a question: I can't find the way to switch between the integrated Intel HD 4000 and 650 M from Nvidia graphics cards. The laptop runs all the time on the Intel card (even when playing 3D games). In the Panel, I can see the two cards. If I right click on the desktop, I don't see anything on the switchable graphics. Also, when I try to start the Nvidia Control Panel, I get an error message that none of the screens is to use the Nvidia GPU and therefore the display settings are not available.

  Can someone tell me how to move to the Nvidia card? Also, when I was installing drivers Intel 4000 HD, just at the end of the process, I got an error message, but the tool then said 'Installation successful'. The error, if I remember correctly, was not being able to create a process.

  Thank you for your help,

  Mircea

  OK, what I did (and resolved the issue) was to simply remove the drivers for nVidia cards (works best in safe mode) and Intel processors and then reinstall them. This time the Intel driver installed and correctly after the installation of the nVidia card I could access the settings.

• Satellite P850 - how to change the graphics settings in the BIOS?

  Hello

  I have a laptop Toshiba Satellite P850 and recently met with a gambling problem which required me to change the graphics settings in my BIOS from 64 MB to 128 MB.

  I was able to access my BIOS on my windows 8.1 operating system but when I'm on my BIOS, I can't find where to access the chipsets and change the graphics settings. I looked at all long and hard day for a solution and haven't found one that relate to my BIOS (version 6.70). It would be very appreciated for any help you can offer.

  Data sheet:

  Processor: Intel Core i7
  OS: windows 8.1
  BIOS: 6.70

  Dan.

  Hello Dan

  As far as I know these parameters do not exist and if the laptop has shared memory it runs automatically.
  In the past, that Toshiba has never offered these options in the BIOS, and so far nothing has changed.

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Can not find "Main card" setting in the BIOS

  I have an Optiplex 3020 using INTEL HD Graphics, which came with the unit. I recently bought 730 PNY GEFORCE GT NVIDIA graphics card, as was suggested by a Dell representative, in order to output HDMI to my TV Smart. In the section "before you begin" instructions, is said that "If you have on-board graphics, built-in, enter the system BIOS and look for a setting called"Primary Display Adapter", or something similar, then set this to PCI." If you can't find this setting, contact your system manufacturer. »

  Well, I went into the BIOS, but I can't find the setting, so maybe someone can point me in the right direction?

  Thank you

  Harry

  Oh, and I run Windows 10, where it is a problem...