Cannot find the display driver just after the replacement of the GPU on Satellite P200
I got my laptop yesterday to SAV, because my graphics card has been damaged.
Now I can start Notepad, but in the hardware Manager is only an entry for the VGA, the new map, which should be in the notebook, the Manager cannot be found.
I tried to find it with the plug-and-play, but with no result.
The system is only VGA... After that I tried with a catalytic ATI 8.9 driver. But after installing it do not work too (I restarted the NB)
May I use the wrong driver from ATI, but I can't find an entry for Mobility Radeon HD 2600.
Only Radeon 2600 Hd. I'm not sure; This driver also works for mobility?
Can you give me a link to the correct driver?
Hello
First of all, it would be interesting to know what series of laptop you have.
Then you are sure that another graphics chip has been used?
Are you sure that it is a Mobility Radeon 2600 HD graphics card?
If you are not 100% sure I would recommend contact the technician who changed the GPU and seek clarification; What GPU chip has been used and where to find the driver.
I'd appreciate some feedback from you!
Tags: Toshiba
Similar Questions
-
Vista cannot find the mouse USB - Satellite P100 - 434 PSPADE driver
* Need help to install a mouse optical usb on vista32 *.
I have two mice, two optical usb, 1 wired and 1 wireless. They are the two plug-and-play so when to plug their vista must locate and install the right drivers automatically... it can't.
Vista search drivers on the disk and hard on the internet."" looking software... looking for an online software.. "."
Then says:
"Windows encountered a problem installing the software driver for your device."
Windows found driver software for your device but encountered an error trying to install it.
USB Human Interface Device
The system cannot find the specified file. »They are plug-and-play and just install automatically, there is no driver CD that come with the mouse.
I have a Toshiba Satellite PSPADE P100-434 with Vista 32 bit purchsed new 2 weeks ago.
Help, please... Thank you!
It's strange, because the standard optical mouse should be installed without time and without the need of specific drivers.
Did you check the homepage of the manufacturer for drivers?And have you installed all the latest updates for microsoft windows and SP1?
-
Cannot find the BIOS for Satellite 1900-803
Hello
I have a Toshiba satalite s1900-303 (model number-ps192e-00g1n-en) and I'm not.
I have somehow locked myself out of the laptop. I used to haver a password to use the laptop. This password is not only for the bios, it is also necessary for the operation of the laptop.Somehow the password has changed and that's why I can't use the laptop at all. I contacted toshiba store and theyu said to use a loopback serial cable to fix it somehow and he also mentioned in an attempt to crush the bios with a new.
I would like to try this, but I can't find the Bios or drivers. I was wondering if someone can help me solve this problem please.
PS: When regestering on the toshiba site I had to enter the serial number for the laptop.
The model under my name says 1900-803 when the sticker on the laptop clearly said 1900-803Hello
> I have somehow locked myself on the laptop. I put a password for the laptop. This password is not only for the bios, it is also necessary for the operation of the laptop.
I think that you have set the BIOS password.
Unfortunately, the BIOS password can be removed from the laptop if you n t know the old password.
You can not remove also the BOS password by updating the BIOS. If you would try to update the BIOS while the password is set then the ROM module flashes not properly and you laptop will not boot! It s dangerous!Only Toshiba authorised service provider can remove the BIOS password. Ask the technicians!
PS: You book is a model of Satellite 1900-803 and BIOS, drivers, tools, etc. can be found on the European driver Toshiba page in * file Archive!
Select * Archive Archive Satellite Satellite 19xx *.
Good bye
-
Cannot find the adapter wireless - Satellite A100-467
Hello
I have Toshiba Satellite A100-467 running Windows 7 on this subject.
Yesterday, I put my laptop in hibernation and when he woke up wireless network did not work.
I checked the Device Manager and there is no adapter available wireless network, seems it is not listed by the system.I tried to download and re-install the drivers of network wireless, but without success.
Any suggestion?
The problem even if you restart your laptop?
By the way: is your notebook supported for Win7? I mean did Toshiba offers all the drivers needed and other things?
-
After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.
Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).
[You may want to print these instructions for reference offline. If a step said to reboot, reboot.]
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).
4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.
NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!
5. right click on the file that you saved in step #1 above, and then select run as administrator. DO TAP not your keyboard until the race ends, then restart.
6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN
NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.
9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]
10. restart once again & test.
NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot find the driver for a PSC 2175 in list of 64-bit Windows 7 for HP printers
Cannot find the driver for a PSC 2175 in list of 64-bit Windows 7 for HP printers. Can anyone help?
In fact, the way to solve the problem was to open devices and printers, click with the right button on the icon of the HP psc 2170 Series and use troubleshooting icon. Who finds the driver, thank God. Found this just by chance!
-
When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process. After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified". The close message will invalidate all the installation and possible automatic restart. I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes. Should I try to put the UNIDRV. DLL file on my computer? Any other ideas?
Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):
1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?
2 a Norton or McAfee application ALREADY installed on the computer?
3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).
4. why has not been installed SP3 years? [1]
5. is Firefox, Chrome or any other alternative browser installed?
6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?
7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?
=====================================================================
[1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed. -
Original title: Windows encountered a problem installing the software driver for your device...
Arrrrgh! Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.
I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "
The job of printer/copier/fax end but not go on the scanner.
I tried the 'fixes' to epson.com repeatedly with no luck. This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.
I ran the program to 'fix' Microsoft ATS with no luck. It has detected the error and said that the problem has been resolved, but guess what? No, it isn't.
I clicked on install update driver/driver from Device Manager.
I tried the work around, eliminating the "LowerFilters" of the registry. Guess what? You have it, no luck.
So, before I go and buy a new printer/scanner, with no guarantee that they will work. Does anyone have another suggestion?
I am running Vista, 32-bit.
You can also try and replace or install the ntprint.inf file.
I had a similar problem on a Windows 7 PC and noticed that this file was not present. I just copied the file from a different PC Win7. The printer, I tried to install was a Brother MFC-J410w.
The file can be found here C:\Windows\inf
Hope this helps someone.
-
After that update of Windows 7 with 5 ~ updates which mainly provided increased reliability, these KBs wound up loader of Windows BOOT OS/corrupt the rupture.
Root cause found:
----------------------
Boot Manager cannot find the OS loaderRepair action: repair of files
Result: failed. Error code = 0xa<---- next="" repair,="" this="" changes="" to="">---->
Time taken = 4206 msRepair action: repair store boot configuration data
Result: Has no = 0 error code x 490
Time taken = 221 msRepair action: System Restore
Result: Completed successfully. Error code = 0 x 0
Setting time = ms 44444How to search through my hard drive to find updates KB which is the origin of my computer to lose its bootloader/OS and not starting? What KB update is initially the charger operating system not found when everything worked very well, before these 5 updates.
What are the solutions?
Try the Forum updated; It includes questions of XP, Vista and Windows 7 update:
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.
This has happened
Each time Firefox opened
Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
-
I just bought the SX710 HS. Cannot find the stamp date on the Menu. Is there a?
I just bought the SX710 HS. Cannot find the stamp date on the Menu. Is there a?
It seems strange, but no, I don't think that you can mark the date on the pictures. You can print the with a good date.
-
XP Professional installation error message after extraction of sp3 on hard disk, message: System cannot find the path specified.
Whenever I try to install, I get the same message. How can I fix it? I can't use the "fix" without sp3 installed.
Any help would be greatly appreciated!"system cannot find the path specified".
A google search revealed this can help...
http://aumha.NET/viewtopic.php?f=62&t=33406Also, what is your level of service current pack (start-run then type Winver, and then press enter)? If you have no current service pack level, you must first install SP2. Unfortunately, the link for that
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28
doesn't seem to work today. If all goes well he'll be reinstated soon.
Tricky
-
I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?
You try to install through the Explorer windows, not good... Try to install
XP CD, reboot the pc. At this point, the value of the BIOS pc boot xp cd (cdrom), defined as 1
boot device, set the hd as the second, boot to a cd. On the menu of the xp cd, select "Install xp", remove
the partition, create one, let xp format & install auto. It is a clean installation, also, once she
housing starts, do not touch any keys or mouce until xp asks for the product key #...
You can read about it here. http://TechNet.Microsoft.com/en-us/library/bb457062.aspx
-
I installed an Epson Stylus SX215. I can print, scan and copy if I use another way, but if I want to use the event handler it says that it cannot find the scanner driver may not use the event handler at all (cannot yet open the program).
In addition, the scan option "attached to electronic mail" does nothing either. Don't know if this is because the event handler program or because he can not see e-mail programs I have.Hi bdelrio,
Thanks for posting. Try running a System File Checker to find errors.
Click Start.
In the search box type cmd
In the menu start right click on cmd.exe and select Run - As-Administrator.
In the command prompt, type "sfc/scannow".
Allow this to fill and run. Please let us know if this corrects and error, or if it reports errors, it cannot fix.Thank you! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I tried to backup using a DVD, as usual, but without success. Back to the high status and Configuration States:
Upward did not complete successfully
Original title: back to the top has not completely filled.An error has occurred. The following information can help you resolve the error:)
The drive cannot find the sector requested:
0x8007001B)I've looked everywhere for this problem... need help :)
Babette
Hello
1. have you done any software or hardware changes on your computer before this problem?2. have you checked with another DVD drive?3. using the Windows backup feature to backup?4 do you have third-party backup programs installed on your computer?To work on the issue, refer to these methods.Method 1:Step 1:If it's a DVD I suggest trying to backup to an external hard drive and check to see if you get any errors.
Step 2:Temporarily disable the antivirus software and check if you are able to perform the backup.
Caution:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Back up and restore: frequently asked questions
Set up or change automatic backup settingsChange when you save your files
http://Windows.Microsoft.com/en-us/Windows-Vista/change-where-you-back-up-your-filesMethod 2:I suggest you check for errors of hard disk on the drive you want to back up.Check your hard drive to find errors in Windows 7
http://support.Microsoft.com/kb/2641432NOTE: the steps also apply to Windows VistaCHKDSK warning:
Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.Hope the information is useful.
Maybe you are looking for
-
I would like to add local or drop some variables global to all the new sequence files I create. I was hoping that I could simply add the variable to the process template and make it appear whenever I created a new sequence or in any order who have us
-
White on the screen of the monitor
Most of the games I have installed in the system Windows 7 when I run it starts to a black screen and keep black go forever. I do physical reboot by pressing the button. What I notice is the monitor power LED is orange, which means no signal is sent
-
You can mix SAS and SATA drives in a RAID 1 PowerEdge T110 II configuration
Hello I have a RAID 1 configuration and one of the two drives in the array has failed. I've removed and replaced by another drive hoping the Dell Perc adapter H200 would rebuild the mirror automatically, but it does not. In Server Admin OpenManage
-
Configure the IP address for PowerConnect 2724 on existing network
I tried access the switch using the default IP 192.168.2.1 and can't find it. I was literally out of available ports before the purchase/installation of the 2724. Our network is 192.168.0.x with a subnet of 255.255.255.0. Currently, the managed Mode
-
Activate windows 7 after the expiration date.
I buy the new computer more than months ago. I thought that the manufacturer has already activated my W7 that I was wrong it just installed but not enabled. Now, after the holidays my W7 is expired and I just get a white screen on Normal Mode. I don'