Cannot find the display in Code view Options button

Similar Questions

• I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  This has happened

  Each time Firefox opened

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• Cannot find the display driver just after the replacement of the GPU on Satellite P200

  I got my laptop yesterday to SAV, because my graphics card has been damaged.

  Now I can start Notepad, but in the hardware Manager is only an entry for the VGA, the new map, which should be in the notebook, the Manager cannot be found.

  I tried to find it with the plug-and-play, but with no result.
  The system is only VGA... After that I tried with a catalytic ATI 8.9 driver. But after installing it do not work too (I restarted the NB)

  May I use the wrong driver from ATI, but I can't find an entry for Mobility Radeon HD 2600.
  Only Radeon 2600 Hd. I'm not sure; This driver also works for mobility?

  Can you give me a link to the correct driver?

  Hello

  First of all, it would be interesting to know what series of laptop you have.
  Then you are sure that another graphics chip has been used?
  Are you sure that it is a Mobility Radeon 2600 HD graphics card?

  If you are not 100% sure I would recommend contact the technician who changed the GPU and seek clarification; What GPU chip has been used and where to find the driver.

  I'd appreciate some feedback from you!

• Satellite A500 - cannot find the display drivers for Windows 7

  I can't find the video drivers for Satellite A500 - 1 c 0, P/N: PSAR3E for Windows 7 x 86.

  I tried on the Nvidia site, they recommended the manufacturer's website...

  Hello

  Normally, you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I checked this and it seems that for the moment no are no 32 bit Windows 7 drivers available.

  What you can do now is looking for other display drivers. Maybe an another Toshiba laptop has the same graphics card and it has Windows 7 drivers released.
  Otherwise, you can try the 32-bit drivers for Vista. Normally, they also work on Windows 7.

• Cannot find the display driver for Vista 64 bit for Satellite L300 - 17l

  Hello

  I installed now windows 64 vista on my laptop, but I can't find a driver for my display that works in vista 64.
  On the Toshiba site, they have just the version of Vista 32.

  Maybe someone can help me to find the right one.

  Greetings

  Hello

  I discovered that Portege M700 (PPM70E) has the same graphics card and it is supported for Vista 64-bit. Download and try to install the version of the driver 15.2.6.64.1272.

  You can find it on http://eu.computers.toshiba-europe.com > support & downloads
  Please inform us if everything works well.

  BTW: you have created recovery DVDs until you have installed the new version of Vista?

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

• Cannot find the display settings to change the background.

  
  

  • Windows Vista
  • Receives the following message appears: "your system administrator has disabled launching of the display settings control panel."
  • Have not made any changes to the mu computer
  • I tried to find it, and I can't find where to remove this restriction.

  Try the link below:

  Your administrator system off the Panel control is displayed - PC troubleshooting help tips

  http://www.onlinecomputertips.com/troubleshooting/display_error.html

  I hope I could help

• Satellite P300-1GK cannot find the display driver for ATI Radeon HD 4650 Win XP

  Hello

  I can't find the driver for my ATI Radeon mobility HD 4650. There is an error on the toshiba Web site download page.
  My laptop is a P300-1GK (PSPCCE). The drivers are for the 3650 etc... not for the 4650. Where can I find the right idea?

  ATI Mobility Radeon HD 4650 graphics card
  VendorID: 0 x 1002
  DevideID: 0 x 9480

  Thank you

  Hello, Damien

  Sorry, but can you please tell me why this driver is not the right one? An error message or what?
  The same driver that Toshiba use for the Windows XP Home edition recovery image.

  Unfortunately my P300 is not with the ATI graphics card and I can't test it.

• Cannot find the rip in reading or library button in Windows Media Player 12

  Original title: no rip button

  When I open media player I don't see the rip in reading or library button

  I tried to copy a cd on my new desktop PC and computer laptop windows 7 OS. The CD I'm tearing a 75 WMA format songs on this is a different procedure to do? When I open the drive I get no burn button or option button

  There is no need to rip data CDs containing MP3/WMA files. You can just browse the CD with Windows Explorer and drag and drop the files in your folder of music . WMA songs will automatically appear in the WMP library. Tim Baets
  http://www.BM-productions.TK

• Equium A60-181 (PSA67E) - cannot find the display driver

  Due to problems with some games I did experiments with other ATI drivers for my laptop.
  It turns out that their support for Open GL is scandalously broken so I tried rolling back the drivers.
  Unfortunately Windows doesn't let me do it because I need the original driver files so tried to download on the Toshiba support page.
  Well although it seems that the Equium A60 - 181 aka PSA67E does not appear as a product more also any attempt to seek A60-181 or PSA67E displays empty hits Unlike Google or Msn.

  What happens here? Please tell me Toshiba did not hold for this laptop isn't exactly new or old it is still worthy of driver / BIOS update support especially when needed.

  Richard S.

  Akuma is right. All the notebooks are listed in the archives.
  Check it out.

• Unable to save the family settings, error: the system cannot find the specified file 80070002 error code.

  Original title: Family Safety filter configuration problem.

  Hello.

  I got family safety works very well before a reinstall of Windows 7 Professional.  After I install windows essentials, I connect to my microsoft account, now I'm trying to set up the filter, monitored accounts are already checked, the only option is to save.

  When I click Save I get this

  The system cannot find the specified file 80070002 error code.

  I've tried everything.  Uninstall, reinstall Windows Essentials 2012.  First of all, I did a partial install with just the film and the family.  Uninstalled.  Re-installed full.  Always the same question.  I even tried to install Windows Essentials 2011.  No change.

  Help, please.  I appreciate it.

  Thank you

  GISIGER

  Hi Greg,.

  Thanks for the reply.

  Run the System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Also reset Windows update components and check if this solves the problem.

  Refer to this link:

  http://support.Microsoft.com/kb/971058

   

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  Keep us informed on the status of the issue.

• Cannot find the exectable Viewer in a temporary file when I use image viewer

  When I try to view a CD in the image viewer, I get a message saying 'cannot find the viewer in a temporary file.

  Can someone help me with this problem?

  Hi Robert,.

  As a work-around, try to copy the contents of the CD player on the desktop and check if you are able to view the files.

  If you encounter an error, please let us know the exact error message.

  In addition, to give authorization to the Temp folder and check if it makes a difference.

  The path of the Temp folder will normally be

  \AppData\Local\Temp C:\Users\

  In order to locate the temporary folder in windows 7, follow the steps below:

  1. Click Start, in the search box, type CMD.
  2. Right click on CMD and select run as administrator.
  3. In the command line type ECHO %Temp%.

  To change the permissions to the TEMP folder, follow the steps provided by John Rubdy in http://answers.microsoft.com/en-us/windows/forum/windows_vista-files/how-do-i-change-folder-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed

  Note: The steps also apply to Windows 7.

  This is a step that has worked for some users who use CD xray viewer program.

  Copy and replace the 2 files; 'CDViewer_11.04.0001' and 'sectra' in the case of non-functional account (on the user account where the CD can be read without any problem)

  Location: C:\Users\\AppData\Local\Temp (where user name of the user account name you have connected)

  Note: you must copy the two files to a different user account where you don't have the files on the CD display problems.

  Hope this information is useful. If you have any questions, please let us know.

• When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

  Net 51 with a view system error

  I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

  However, when I perform a net view on, I get the following error

  51 system error has occurred.

  Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

  How to make this command work?

  Hello

  ·         Your computer is on a domain network?

  Follow the steps in troubleshooting this article and check if that helps:

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  See also this article that resembles the same error.

  Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

  http://support.Microsoft.com/kb/259878

• Vista cannot load RealPlayer/FireFox message "the system cannot find the environmental option". Any ideas?

  Vista cannot load RealPlayer/FireFox message "the system cannot find the environmental option". Any ideas?

  Hi Magnusopus,

  ·        You receive this message when you use Real player or Firefox?

  ·        You did changes to the computer before this problem started?

  You can try to uninstall Real player and firefox to the computer and reinstall and check if that helps you solve the problem. Access the link below and follow the steps to uninstall the program from your computer.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Subsequently access the links below to download Firefox and Real player and even install and check if it works very well.

  Link to download Firefox:http://www.mozilla.com/en-US/firefox/ie.html

  Link to download Real Player:http://www.real.com/realplayer

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup of Windows 7 - the system cannot find the specified path, error Code 0 x 80070003

  I have serious problems back up my own machine to a share on our FILE SERVER as \\FILE-SERVER\Backup\

  I have already backed up another PC using exactly the same settings I used on my PC successfully.  So I guess it's nothing to do with the FILE SERVER or the backup settings.  There must be something to do with what I'm trying to backup of my machine.

  First, some background.  This exercise was started when Windows Server 2008 r2 o/s fell one of our servers.  I tried to reinstall the operating system several times, without success.  In the end, I caught another drive and rebuilt the o/s on the server.  Then I got in trouble by promoting to a domain on the network controller.  In the end, I've renamed server FILE Server for FILE SERVERS.

  We share regularly four records on what is now the FILE SERVER:

  \\FILE-SERVER\Backup - a folder where the backups of all other devices are written, so that they will be saved with the server

  \\FILE-SERVER\Company - contains all of the data of our company

  \\FILE-SERVER\GEM - this is for our own database application

  \\FILE-SERVER\Install - contains all the installation files for the software we use

  These are all inmates on a RAID 1 array that is separate from the system drive that covered.

  On my laptop, I had made these "Available offline" shared folders, while I still had everything that is available to me when I was away from the office.  They were of course shared under \\FILESERVER\... not \\FILE-SERVER\... Before the server down, I had backup works fine on my machine.

  After having got the server up and going again, I started going there from the WIndows 7 Client PC backups again.  I started with a desktop computer, which of course have not all offline files.  This turned out to be relatively simple.

  Then, I started with my machine.  Initially I did not 'Available offline' folders shared meanings.  I created my backup using exactly the same settings that had worked OK on the desktop.  But when I ran the backup I got:

  The system cannot find the specified path, error Code 0 x 80070003

  I tried all sorts of things to make it work:

  • with or without an image of the system.
  • reducing the backup in a single folder.
  • do it again 'available offline files

  Nothing makes no difference.  In the end, I looked in the Sync Center to look at the offline files folder.  Under mapped network drives I discovered that I still had the files and folders in \\FILESERVER.  In their Menu Popup 'Always available offline' is grayed out.  So I deleted the Copies offline.  This delete the files in the folders but not files.

  Since I could find no way to delete the old mapped network drives.  I decided that I had painted myself into a corner.  So I bit the bullet and re-installed my laptop too.  This will get rid of the unwanted old mapped network drives - BUT NOT the ERROR!

  HELP - I'm running out of ideas!

  I have a WORD Document that all the settings that I used on the server and Clients, as well as the reasoning behind these settings, documents, but I can't find a way to download.

  Hi Brian,.

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point.
  Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive. For example, a reparse point would a folder such as C:\DVD to point to drive E, the real DVD player.

  Perform the steps from the link below and see if the backup works.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

  If you work with Windows Server 2008 and the mapped drives, I would recommend that you post the question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  I hope that using information provided!