Cannot find the motion controller

I use a 12 unidex by aerotech motion controller.  My labview program worked well, my motion controller when all of a sudden he couldn't find it.  I went measures and tab automation looking for him, but he could not find the controller.  The program has been able to find all other connected devices, but not the command of movement.  I disconnected all other devices except the unidex and labview still could not find it.  Then I took the controller and it covered on an identical motion controller (no reason to).  Not only labview couldn't find the first motion controller, he could yet find that I had grafted on.  Thoughts?

Good new everyone: the GPIB address was surreptitously to 0 which remote impossible given that this value is reserved for the GPIB controller.  I appreciate the advice of each.

Tags: NI Software

Similar Questions

  • HP2000 2D09SLA, cannot find the network controller driver after reclassification of win8 base to win8pro

    HP2000 2D09SLA, PROFESSIONAL 64 BITS OF WINDOWS 8.

    After installing windows8pro, I could not find driver for network controller, since then I can not use my wireless.

    Hello:

    Follow these steps, and I'll post the link to the wireless driver you need...

    Go to Device Manager, find the other devices category, click the network controller needing drivers.

    Then click on the Details tab at the top of the control of the network window.

    Now, you see a drop-down list of property and it is set by default to the Description of the unit.

    Drop down on it and select the second item in the list (Hardware ID).

    After the first string of characters that start with PCI\VEN.

  • System cannot find the file specified during the installation of the Bluetooth drivers

    Hello, I have HP Envy DV6 and suddenly my bluetooth work collapsed. The on-off switch under wireless settings is inactive (64 bit of windows 8). IAM able to see the bluetooth controller in Device Manager with! Select this option. When I update its driver or try to install the drivers it says system cannot find the specified file. also I tried installation correct latest drivers of my laptop from the HP site is no help. Thank you

    Thank you.

    Do not use the sp59632 or sp61795. They all have two software driver for Windows XP and Win7. Maybe that's why you got the error message. I extracted the softpaqs and took a look to see what was inside.

    It is for the wrong operating system

    It is also for the wrong OS

    sp58515 should work.

    Since your laptop came with Windows 8, why not use the Recovery Manager to reinstall the driver?

    I recommend this as the best method to use. It is a one stop shop and denies the need to search for drivers online. Your recovery manager will be the drivers for hardware that is installed in your laptop.

    Invoke the charm to search for and type Recovery Manager. Click the Recovery Manager. You should see a window similar to the following image. Now, click on drivers and reinstall the Applications.

  • AppAssure BMR cannot find the Destination disk.

    I am preforming a bare metal restore material disimillar and Appassure cannot find the drive on the target computer.

    Restore dell Poweredge R430 13g. The discs are in a controlled by a H330 PERC RAID 1.

    Is there something I am missing, usually displays the disc without any problems?

    Thanks for the support!

    Inject you the Perc controller drivers in the boot cd when it was created? If this isn't the case, then this is probably the issue.  He can't access the storage controller so he can't see the disks.

  • Ripple can not build app Playbook: the system cannot find the path specified.

    Not a huge surprise here, but I tried to compile my app for Playbook in undulation. After following all the steps of downloading all the SDKs, get and save new keys, have all the files in place, etc.. Ripple can simply with:

    Oh Snap! Build request failed with message: The system cannot find the path specified.
    

    Without rhyme or reason. No way to detect what it is. Ripple is dangerously wrong sometimes. And the "Oh Snap!" part is terribly boring.

    I was able to build the application via command line (which requires you to make a zip file of everything manually... * sigh *).

    Anyone know how it is possible to debug?

    Hi shnuffy,

    Assuming that the Tablet is the installation folder which includes bbwp and jre, you'll want your SDK path pointing there. Example:

    C:\BBWP\tablet

    For example, my Tablet SDK is installed in this folder that is used in my Path SDK:

    C:\Program Search SDK WebWorks Motion\BlackBerry to Tablet 2.2.0.5

    Note that I am assuming that your path refers to the folder that contains bbwp.exe, but you really want to make a folder of higher level.

    Other paths seems fine. Can you give than to try and confirm if you still have questions?

    Erik Oros

    BlackBerry Development Advisor

  • IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210. tmp\sampleapp (the system cannot find the file specified) [ERROR] CAP exception has occurred

    C:\Program search in Motion\BlackBerry 2.3.1.5 > bbwp SDK WebWorks
    C:\apps\sampleapp.zip o C:\apps\Output2
    [INFO] Parsing of the command line options
    [INFO] Bbwp.properties analysis
    [INFO] Validation of archive application
    [INFO] The analysis of config.xml
    [WARNING] Cannot find an element of
    [INFO] The application of filling source
    [INFO] Compilation of application BlackBerry WebWorks
    IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210
    . tmp\sampleapp (the system cannot find the file specified)
    [ERROR] CAP exception has occurred

     

     

     

    How do I solve this problem

    The tools are not compatible with JDK7. You need to install JDK6 and it must be the 32-bit version.

    If you have several versions of the JDK, you can modify bbwp.properties in the subfolder bin of your SDK WebWorks to include the following text:

    C:\Program Files (x86)\Java\jdk1.6.0_31

     


    You would update the JDK version to match your own, but note that this is the SEO Program Files (x 86); the path 32-bit installations. This way you can have several JDK if you need, but the command bbwp must reference the appropriate JDK.

    In short, he must be JDK6 and it must be 32-bit.

  • Backup of Windows 7 - the system cannot find the specified path, error Code 0 x 80070003

    I have serious problems back up my own machine to a share on our FILE SERVER as \\FILE-SERVER\Backup\

    I have already backed up another PC using exactly the same settings I used on my PC successfully.  So I guess it's nothing to do with the FILE SERVER or the backup settings.  There must be something to do with what I'm trying to backup of my machine.

    First, some background.  This exercise was started when Windows Server 2008 r2 o/s fell one of our servers.  I tried to reinstall the operating system several times, without success.  In the end, I caught another drive and rebuilt the o/s on the server.  Then I got in trouble by promoting to a domain on the network controller.  In the end, I've renamed server FILE Server for FILE SERVERS.

    We share regularly four records on what is now the FILE SERVER:

    \\FILE-SERVER\Backup - a folder where the backups of all other devices are written, so that they will be saved with the server

    \\FILE-SERVER\Company - contains all of the data of our company

    \\FILE-SERVER\GEM - this is for our own database application

    \\FILE-SERVER\Install - contains all the installation files for the software we use

    These are all inmates on a RAID 1 array that is separate from the system drive that covered.

    On my laptop, I had made these "Available offline" shared folders, while I still had everything that is available to me when I was away from the office.  They were of course shared under \\FILESERVER\... not \\FILE-SERVER\... Before the server down, I had backup works fine on my machine.

    After having got the server up and going again, I started going there from the WIndows 7 Client PC backups again.  I started with a desktop computer, which of course have not all offline files.  This turned out to be relatively simple.

    Then, I started with my machine.  Initially I did not 'Available offline' folders shared meanings.  I created my backup using exactly the same settings that had worked OK on the desktop.  But when I ran the backup I got:

    The system cannot find the specified path, error Code 0 x 80070003

    I tried all sorts of things to make it work:

    • with or without an image of the system.
    • reducing the backup in a single folder.
    • do it again 'available offline files

    Nothing makes no difference.  In the end, I looked in the Sync Center to look at the offline files folder.  Under mapped network drives I discovered that I still had the files and folders in \\FILESERVER.  In their Menu Popup 'Always available offline' is grayed out.  So I deleted the Copies offline.  This delete the files in the folders but not files.

    Since I could find no way to delete the old mapped network drives.  I decided that I had painted myself into a corner.  So I bit the bullet and re-installed my laptop too.  This will get rid of the unwanted old mapped network drives - BUT NOT the ERROR!

    HELP - I'm running out of ideas!

    I have a WORD Document that all the settings that I used on the server and Clients, as well as the reasoning behind these settings, documents, but I can't find a way to download.

    Hi Brian,.

    These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point.
    Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive. For example, a reparse point would a folder such as C:\DVD to point to drive E, the real DVD player.

    Perform the steps from the link below and see if the backup works.

    Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

    If you work with Windows Server 2008 and the mapped drives, I would recommend that you post the question in the TechNet forums.

    http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

    I hope that using information provided!

  • Cannot use windows backup error: 0 x 80070002 the system cannot find the file specified

    Original title: Backup failed, error code but no NVIDIA chipset

    Whenever I try to use the Windows backup utility, I get a failure with the error code 0 x 80070002 and "the system cannot find the specified files" - I found KB976972, which refers to these two messages, and I have all the conditions specified here EXCEPT that I don't have an NVIDIA USB Enhanced Host controller Interface (EHCI) chipset.   I advanced and tried the hotfix download referred to in article, but he wouldn't because he did not to my system.   I don't seem to find any other KB articles that are relevant.   I have a lot of space on the external hard drive that I am backup.    Would appreciate any help.

    Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

    ====================================================================

    Norton Ghost version 15 - has a 30 day trial available
    http://www.Symantec.com/Norton/Ghost
    Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
    (Note: trial does not create a Bootable restore CD you will need to restore the image)
    http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
    User Guide: ftp://ftp.symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.pdf

    Acronis True Image 2012 - has a fully functional trial version of 30 days available.
    (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
    http://www.Acronis.com/homecomputing/products/
    30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
    True Image User Guides and documentation:
    http://www.Acronis.com/support/documentation/index.html

    Ghost 15 product review
    http://www.PCWorld.com/reviews/product/384118/review/Norton_Ghost_15.html
    Ghost 15 screenshots:
    http://www.Softpedia.com/get/system/back-up-and-recovery/Symantec-Norton-Ghost.shtml

    Acronis True Image Home 2012 product review:
    http://www.whatsabyte.com/P1/ATI_2012_Review.html
    http://www.allacronis.com/Acronis-True-Image-home-review.php

    Acronis True Image Seagate Edition (drive Assistant)
    http://www.Seagate.com/www/en-us/support/downloads/DiscWizard

    Acronis True Image edition of Western Digital (WD)
    http://support.wdc.com/product/downloaddetail.asp?Swid=119&wdc_lang=en

    Also copy disc to disc with Norton Ghost
    http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004111701520562?OpenDocument&src=hot&prod=Norton+Ghost&ver=10.0&CSM=no&SEG=HHO

    Free alternatives:
    EASEUS Todo Backup Home V3
    (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
    http://www.TODO-backup.com/products/home/free-backup-software.htm

    Untested alternatives
    Reflect disk imaging:
    http://www.Macrium.com/reflectfree.asp

    Paragon Backup & Recovery Free Edition:
    http://www.Paragon-Software.com/home/DB-Express/download.htm

    J W Stuart: http://www.pagestart.com

  • Win 7 Pro, FX6100, 8 GB of ram, 250 GB ssd; cannot find the system partition

    Basics are there.  It blocks from the tent to set up partitions.  I am giving all of the 250 GB SSD to use as seems it and it is just lost.  It does work with no partitions, partition of the entire disk.  He didn't tell me what he wants.  And error messages make no sense.

    They are like: (and my response)

    cannot find the system partition (do a stupid)
    Can not find the installation partition (crikey, I gave you the entire disk, make one)

    Talk about mega-frustration.  How about a useful error message and some useful ways to respond.

    >:-((

    If the ssd is not recognized in the first part of the installation process, as a location to install win on, you need to check the manual of the card mother about all the necessary bios for its port settings, or weather, you need to install any third-party disk controller.

    And if it's a new ssd, must not contain any partition table, unless you have prepared this ssd when you started in one of your other installations win, that can be part of your problem.

  • ESXi 4.0 Dell T105 "cannot find the boot partition.

    Dban Nuke used to wipe my hard drives (two of them).

    Unplugged the secondary hard drive.

    Installed ESXi 4.0 (declared success).

    Machine starts, starts in ESXi 4.0, starts to load, then:

    "Cannot find the boot partition.

    Others have suggested to set parameter SATA AHCI controller. Not possible in my BIOS. I 'ATA Mode' and 'Off '. "Off" turns off the entire controller and my hard drive is not recognized.

    Others still suggested to install on a USB key. Wary of such a hack...

    Help, please. There is very little out there on ESXi 4. Even a pointer to VMware documentation with a list of error messages and their meaning/solutions would be helpful (unable to find such a list myself).

    I had the same problem that others are with the start-up for the drives. I went with the USB boot and it works very well because it has an internal USB port, it works even better because I'm not burn an external port. I use an older version of BIOS that does not start USB ports have enough fast for the key USB is recognized from a cold start *bummer* but not a big deal. Once this is done, I'm off the coast and run very well.

    I would recommend going this way until someone comes up with a better alternative, which I would be interested in doing.

  • I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

    I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

    We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

    If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

  • Cannot find the seetings camera

    Cannot find the camera settings in firefox os smartphone

    Hi sanatankumarsahu,

    What settings to configure for your Firefox OS device camera?

    There is no specific menu of camera settings, but depending on your device and the version, you can choose another camera, turn flash power or reset the focus.

    Please reply to this message with your Firefox OS as well the version and the Build ID device model so that we can give you a definitive answer.

    Thank you

    -Ralph

  • Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

    Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

    Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

  • Message "Safari cannot find the server.

    In all these days, I get a message 'Safari cannot find the server' on a regular basis despite the fact that I'm connected to the internet and the server is a real server, such as Google or other sites that I use all the time.

    Is there something funky past with Safari that it would suddenly start happening?

    1 disable Proxies if selected.

    System Preferences > network > advanced > proxies tab

    Unlock the lock if you have to.

    Under 'Select the Protocol', uncheck if checked.

    Click 'OK' and then 'apply '.

    2. If this does not help, run EtreCheck and post the report here.

    http://etresoft.com/etrecheck

    Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

    Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

  • "Safari cannot find the server.

    I have not had this happens in another version of Safari, but since the update more recent (9.1.1 on May 17, 2016), I get the following message several times a day: "Safari cannot find the server. Refreshing the page does not help. After I visit some other sites, I am able to connect to those that I had a problem with. Most of the information I could find going back five or more and seems not applicable. It is not necessarily the same sites that don't load. It is random and occurs throughout the day. It's annoying and sometimes embarrassing, but I'm dealing with it (I didn't wish)!

    Does anyone else have this problem? Is this a bug in the latest version of Safari and there at - it an easy fix? Any advice will be greatly appreciated.

    Thank you.

    Hello

    Could be a cookie problem...

    In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

    Quit and then restart Safari to test.

Maybe you are looking for