Cannot find the network on HP Pavilion

Hello
I don't find my network wireless on my HP Pavilion. It lists a whole bunch of other networks except me. Ive tried unsuccessfully to troubleshooting.
It was fine this morning and I have wireless on my phone, so it's the computer. My product number is E4X87PA #ABG. Any help would be greatly appreciated.
Thank you
M

Hi @MaryamCD

Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

I saw your post about wireless problems you are having with your Pavilion. Have you tried to connect to any of these other networks to make sure that your wireless network is able to connect and funtion correctly? In general, if you can see the other networks it could be something on the network at the origin of the problem. If you have not had the chance to unplug your wireless router and the model please do. Leave of them disconnected for 30 seconds, and then reconnect hide them in. Then see if you can see your network again.

What operating system do you use? What have listed it under network adapters in your device manager? What is the product number for your Pavilion?

Tags: Notebooks

Similar Questions

  • When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

    Net 51 with a view system error

    I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

    However, when I perform a net view on, I get the following error

    51 system error has occurred.

    Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

    How to make this command work?

    Hello

    ·         Your computer is on a domain network?

    Follow the steps in troubleshooting this article and check if that helps:

    You cannot access shared files and folders or browse computers in the workgroup with Windows XP

    http://support.Microsoft.com/kb/318030

    See also this article that resembles the same error.

    Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

    http://support.Microsoft.com/kb/259878

  • HP2000 2D09SLA, cannot find the network controller driver after reclassification of win8 base to win8pro

    HP2000 2D09SLA, PROFESSIONAL 64 BITS OF WINDOWS 8.

    After installing windows8pro, I could not find driver for network controller, since then I can not use my wireless.

    Hello:

    Follow these steps, and I'll post the link to the wireless driver you need...

    Go to Device Manager, find the other devices category, click the network controller needing drivers.

    Then click on the Details tab at the top of the control of the network window.

    Now, you see a drop-down list of property and it is set by default to the Description of the unit.

    Drop down on it and select the second item in the list (Hardware ID).

    After the first string of characters that start with PCI\VEN.

  • Printer cannot find the network

    I just bought a new printer HP Photosmart 5514.  I tried to connect to my wireless router, but he can't find it. I checked to make sure that the router was conducted, it was broadcasting the SSID and I have was close enough to receive the signal. Everything was ok, but it has always failed. I still don't see it.  (On a side note, 2 laptops can see the router and another 1 laptop can't see the router). I think I might be missing just a setting somewhere but can't find it.  Help, please!

    I have a Linksys WRT320n.

    Wireless broadband: 5 GHz
    Network mode: mixed
    The network name (SSID): wire78
    Channel width: Auto (20 & 40 MHz)
    Channel: Auto
    SSID Broadcast: enabled

    Security: WPA2 Personal with a password

    MAC filtering: disabled

    I found the error.  I needed to have the band Wireless 2.4 GHz.  Fixed both the problem of connectivity to the printer and the laptop that did not see the network.

  • Cannot find the network-

    Hello - my laptop has a Wi - Fi connection and net access.

    For a long time, I was using the laptop with the wireless connection. My router assigned 192.168.1.237 to the Wi - Fi connection.  I was able to map the disk on the laptop and remote access.

    A month ago I connecting the laptop to my home network via a wired connection to 192.168.1.172 - once again, I make me connections to and from the laptop.

    Now, I disconnect the wired connection and now the laptop seems to have trouble finding the other computer on the network or if the laptop can be found

    computer too.

    Don't know if it's an OS problem or a problem with my router and DNS - any suggestions on how to get the laptap back on the network with the

    WiFi would be appreciated.

    NO, but a password is required to connect to the wireless network.

    You must have a cryptographic, or otherwise you wouldn't need a password.  If there is no encryption configured in your router, where is the need for a password from a?

    Determine the IP addresses of other devices on your network (for Windows computers, run an ipconfig command in a command prompt window).

    They should all be a 192.168.1.xxx where xxx is greater than 1 and less than 254.  Are they?

    Open a command prompt window and type

    Ping

    What is going on?

    Given your description of what works and what does not work, I can only think of two possible explanations:

    • Some firewall 3 rd-party blocks wireless connection: what security software is installed, including your antivirus program, any firewall program, any program antimalware, etc.. ?
    • You are currently connected to the network wireless to a neighbor with the same SSID (network name).  It would be very likely if you, indeed enter a password to connect wireless
  • X 220 - WDS - cannot find the network card drivers - help!

    Hi guys

    I have a laptop computer X 220 here and try to use the Windows deployment server to deploy Windows 7 Pro SP1

    Ive downloaded the drivers support page and copied in the boot.wim to the installation.

    whenever I run the PXE boot it telling me network adapter drivers not found.

    Ive google and tried several other drivers for the NETWORK card intel 82579LM nothing works.

    any ideas?

    advice or assistance appreciated.

    Thank you

    OK incase others are looking, I used these drivers: http://www.symantec.com/connect/downloads/latest-intel-nic-drivers08042011-not-present-windows-pe-de...

    and now everything works!

  • Cannot find the network driver

    Hardward Ids:

    PCI\VEN_10EC & DEV_8136 & SUBSYS_2AB7103C & REV_05

    PCI\VEN_10EC & DEV_8136 & SUBSYS_2AB7103C

    PCI\VEN_10EC & DEV_8136 & CC_020000

    PCI\VEN_10EC & DEV_8136 & CC_0200

    HP slimline E5000

    s5716f

    Windows 7 ultimate 32 bit

    Installed several drivers failed

    Help, please

    Hello

    You have problems because of the drivers didn't like these drivers belong to Eathernet port

    You can connect your Internet if not fallow the steps

    1. go to Device Manager and uninstall and reinstall the driver for the network card

    2. after having what its still the same try doing system recovery fom F11

    3. always if it's the same problem the motherboard needs to be replaced because the port net eather is part of the motherboard

    Thank you & Regarsd
    Dinesh Kumar
    * Click on the thumb BRAVO upwards on the left say "thank you."

  • Printer cannot find the network (iPad)

    HP3050A can't find my airport network. I'm trying to print from the IPad displays-there of printers available in configurations

    OK, I did a bit of homework on this and spoke to the team of Mac here at HP.  The iPad can not implement it (and a few other HP wireless printers) to connect to your wireless network.  I'm sorry.

    You'll have to borrow a computer to configure the printer.  Once configured, your iPad can use very well.

    When you get the computer home, first, click the button on the front of the printer wireless and choose the default settings.  You will have a time of this point for the installed printer.  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

  • HP Color LaserJet Pro M177 MFP: HP Color LaserJet Pro MFP M177 cannot find information network

    I just got my new printer today. I followed the instructions to the letter. Now I try to connect to my network to the "Wireless Setup Wizard" that my router does not support WPS. I sat waiting for the printer view all networks in the range so I could choose mine and continue on. However, after 15 minutes of waiting, I decided to go shopping while he did his thing. I came back 1 hour later and it's still displaying "Retrieve information from wireless network" with the symbol of HP and a blue bar encircling it. It is not locked up as I can hit the Cancel button and it returnes to the network configuration menu. What I'm doing wrong here? My network uses a router NETGEAR WNDR4500 with security WPA2-PSK [AES] is enabled. It transmits the band b/g 2.4 Ghz and 5 Ghz n band. Please any help would be appreciated.

    Hi @Rieu,

    Welcome to the HP Forums!

    I see that your HP Color LaserJet MFP M177 Pro cannot find the network on Windows 7. I'm happy to help you with this problem of connection!

    Please, take a look through the steps in this guide, "Printer is off-line" Message appears on the computer and the HP printer does not print. Thus, this guide, the printer is not maintaining the wireless connection.

    Tips for troubleshooting wireless problems

     
  • Wi fi not working do not. Cannot find the hp pavilion d107tx - network card drivers

    Hey,.

    I bought the hp pavilion d107tx with BACK and replay I'm unable to find the network card drivers because of who I am unable to use the WiFi on my laptop. Please do the necessary to find the right drivers for my laptop.

    Product - hp pavilion d107tx

    Operating systems - Windows 7 Service Pack 1 64-bit

    Hardware device-

    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
    PCI\VEN_168C & DEV_0036 & CC_028000
    PCI\VEN_168C & DEV_0036 & CC_0280

    Hello

    Please try the following driver for your machine

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63802.exe

    Kind regards.

  • HP Pavilion dv6910us can't find the network device driver

    My computer laptop specifications:

    Product name: dv6910us

    Product number: FE653UA #ABA

    My problem:

    Windows 7 32 bit does not have the network adapter network driver.

    I tried to connect online network Port RJ45, flickered light in this RJ45 port, it is good work.

    --------------

    Could find you out for me, the network on the laptop HP Pavilion dv6910us driver? You can find the network driver to aid for all Version of Vista or Win 7 operating system 32 and 64-bit.

    Thanks for the help!

    Huy, LD

    Hello:

    This driver should install the wired ethernet adapter.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55781-1&CC=US&DLC=en&LC=en&os=2093&Product=3740556&sw_lang=

  • HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

    PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

    OS: Windows 7

    OWNER: More than 2 years without any problem

    LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

    QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

    Help!

    I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

    -Spencer

  • My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

    My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

    Since you have formatted the PC and reinstalled Windows, your question will be handled better in the hardware forum space and drivers for Windows 7, so I'll move it there.

    Apparently, you need to install the driver of your PC network. If you used the CD to restore the PC manufacturer that should have been included, but it may be on a 2nd CD with drivers and programs.

    If not, the first thing to do is contact the PC manufacturer to see if they have a driver available for download. If the PC has a wireless network card and wired, perhaps one has been configured, but not the other and you try to use the not yet detected and installed.

    -steve

  • Cannot find the printer on the wireless network

    My new 6500 a 710n-z printer copier copies very well.  Also, it detects the wireless network and is given an address 169.254.182.35.  I have reset the router several times using the WPS button.  But after I installed the software on my netbook ACER Windows XP, the computer cannot find the printer.  I spent three days trying to get the $% # ^ & * to work.  I see in some documents to get a 169.254. IP address, so I'm probably not connected?  But what to do?

    Well Yes, a 169.254 IP address... is auto-assignée when he can't get one from the router.  The WPS button does not reset the router.

    Do this on the printer: Setup > network > Wireless Setup Wizard. Follow the instructions.

  • ERROR 1606 cannot find the location of the network 0

    I am SO frustrated! I try to install the taxes of the State VA FRO H & R Block home. Whenever I do I get ERROR 1606. He can not find the network 0 location. I have Vista and have bought 2 registry cleaners and tried all of the suggestions online. I'm ready to scream!  Help!

    See if this Support Microsoft tutorial can help you.

    Error 1606: Could not access network location
    http://support.Microsoft.com/kb/886549

    It has a "Fix it for me" application and a "I'll fix it myself" instructions.

Maybe you are looking for