Cannot find the seetings camera

Similar Questions

• MAX cannot find two usb cameras at the same time

  Hello

  I want to use two cameras usb (Thorlabs DCC 1545 M) in NOR-IMAQdx in Labview, but it cannot find a single camera (the one plugged earlier), and also a single camera is shown in MAX. Both cameras working in the manufacturer's software, and if I unplug the 1 unit, the 2nd will be displayed in MAX after a refresh.

  I found that one camera is supported for each USB hub in Labview, and all USB ports in this computer correspond to a same hub online. I don't know if this is causing the problem.

  In fact, I need to take the picture in both cameras at the same time, a switch programmed between the two cameras will work for me.

  Any suggestion and comment will be appreciated.

  Hello Hosni,

  According to this link, you can acquire from multiple USB cameras simultaneously.  The limitation is on the manufacturer and how they interface with the bus of DirectShow.  When you use two cameras of the same make and model, it sometimes happens that not enough information is not IMAQdx to distinguish between the two cameras.  When you switch to MAX cameras, they come as different cameras, or they appear actually virtually the same?

  Since you said switching between them might work, I found an example that does just that.  Just make sure you give a name to each camera single camera.  I hope this will be useful for you.

  In addition, there is a bit of discussion on this topic on the forum of discussion already.  Check out these related threads, or use the search box to search for more.  There is much information available!

  http://forums.NI.com/T5/LabVIEW/multiple-USB-cameras-in-LabVIEW/m-p/833517

  http://forums.NI.com/T5/machine-vision/two-USB-camera-identification/m-p/2193960

  http://forums.NI.com/T5/machine-vision/synchronized-capture-for-multiple-USB-cameras/TD-p/1879647

  http://forums.NI.com/T5/LabVIEW/multiple-USB-camera-image-acquisition-using-vision-acquisition/TD-p/...

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• XP - error: the system cannot find the specified file.

  I was installing Windows XP Service Pack 3 today and it worked very well until he came to update registry after the installation process, after what is happening the installation closes and then displays an error "the system cannot find the file specified." I tried to close all programs, and then restart and shut down everything that runs when the computer starts and which also failed.

  Hello
   
  
  1. have you downloaded the stand-alone package for the service Pack 3 or are you using Windows update?
  2. are you able to boot to the desktop now?
  
  Method 1.
  Run Disk Cleanup and disable the security software and t hen try the same installation and check.
  Want to t he article below for disk cleanup:
  http://support.Microsoft.com/kb/310312
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ < LANG_NAME > \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• System cannot find the file specified during the installation of the Bluetooth drivers

  Hello, I have HP Envy DV6 and suddenly my bluetooth work collapsed. The on-off switch under wireless settings is inactive (64 bit of windows 8). IAM able to see the bluetooth controller in Device Manager with! Select this option. When I update its driver or try to install the drivers it says system cannot find the specified file. also I tried installation correct latest drivers of my laptop from the HP site is no help. Thank you

  

  Thank you.

  Do not use the sp59632 or sp61795. They all have two software driver for Windows XP and Win7. Maybe that's why you got the error message. I extracted the softpaqs and took a look to see what was inside.

  

  It is for the wrong operating system

  

  It is also for the wrong OS

  

  sp58515 should work.

  

  Since your laptop came with Windows 8, why not use the Recovery Manager to reinstall the driver?

  I recommend this as the best method to use. It is a one stop shop and denies the need to search for drivers online. Your recovery manager will be the drivers for hardware that is installed in your laptop.

  Invoke the charm to search for and type Recovery Manager. Click the Recovery Manager. You should see a window similar to the following image. Now, click on drivers and reinstall the Applications.

  

  

• The following error occurred while importing IMG_ #. JPG: The system cannot find the specified file.

  It really starts to annoy me. For some reason, Windows does not allow me to import my photos with Windows more, I was able to import pictures all the time, but all of a sudden it stopped. I tried the import with the program auto-importation of Windows and then I tried to use the import software called Windows Live Gallery. Both gave me the same error message "the following error occurred while importing IMG_ #.» JPG: The system cannot find the specified file. "I tried looking up this error on many sites and have not led to what. I tried to re-formating my memory card but it did not work. Please help me, I can not import all the images and is running out of memory cards, I don't want to delete the images I took because I can not import to my computer.

  Thank you.

  Hello
   
  1. you try to import these images on the camera?
  2. have you checked if the image files are present on the device?
   
  First cross check if the photos are present on the device and if you are importing from the right location. Try to copy the files manually and paste it on the desktop and see if it works.
   
  For more information on troubleshooting camera connection problems, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems
   
  Post back with the results, so that we can help you better.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• When I was burning blank CD in Windows Media Player, I received this error "Windows Media Player cannot find the file."

  When I burn my blank cd in windows media player, that he was just came.

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. And I click on help, then said: error cood1197

  original title: How can I fix the error cood1197

  Hello

  Did you change your computer?

  I suggest you check out the link and check (which also applies to windows vista).

  Windows Media Player C00D1197 error

  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  I also suggest you to see link and check.

  Solve problems in Windows Media Player http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-in-Windows-Media-Player

• System cannot find the path specified

  I did a system restore on my computer some time ago and some so my Norton Antivirus has obtained the program delete so then I tried to install a new Antivirus program and the computer told me first uninstall Norton and "System cannot find the path specified" came, so I can't even install a new program antivirus on my computer AND I can't reinstall Norton because I don't have the disc. Help please!

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download and run the Norton removal tool link above to remove the remnants of Norton.

  See you soon. Mick Murphy - Microsoft partner

• Photosmart C5180 Installation ERROR - Windows 7 64-bit - system cannot find the file hpzprI40.exe

  Photosmart C5180 all-in-One

  During the installation:

  C:\Users\Test\AppData\Local\Temp\7zS1DB2\Setup\...\hpzdrI40.exe - m...

  The system cannot find the specified file.

  I clicked OK, then came next to the top:

  Error Situation code: 06768865

  The following lines were extracted from installation error logs.

  + Launching 0000000000001246128\s\Now = X:\hpzprI40.exe m

  preloadiceenginetoguidfolder-* "X:\autorun.inf" - nosplash - checkPath

  XXX-1-f "X:\hpoins18.dat" "-number validate dat"-No. validate "

  Found source file: X:\hpzsetup.exe

  VerifyFilesNoDecompression() failed with the system cannot find the specified file.

  Exit code = 2

  H E L P!  I don't know what to do now.  I tried to install the downloaded file, AIO_CDS_Net_full_Win_WW_130_140 on HP site.  My operating system is Windows 7 Ultimate 64-bit.   I need to get this working today and need complete instructions on what and how to do this fix.

  mrsjeffyg, I recommend that you completely uninstall the printer from the computer. Make sure that all copies of the printer and the associated files are removed from programs and features, the Manager of devices, and the devices and printers. If you are connected with a USB cable, make sure that the cable is removed from the printer for the duration of the present.

  Click START and type "%temp%" and press ENTER. This will open the temporary folder, and I want that you delete all the files that you can here. Some will not be able to be deleted, so ignore these files.

  Restart your computer.

  Follow this link here and reinstall it from the Full_Feature Driver and software.

  http://goo.GL/0zXiT

  I would like to know how it goes!

• C4780 cannot find the wireless router

  I have a new iMac and old Toshiba that is running Windows XP and you use a Netgear wireless router.  When I got to the printer, it worked fine on the wireless network.  Bought a new router that I couldn't work with the Mac and the PC so I returned to my original router.  Now, the printer does not work as a wireless printer.  Summaries of diagnosis indicates that the printer cannot find the wireless router and fails under "Network Name (SSID) Found."  On the Network Setup page, my network is listed as a network discovered by the printer.  I guess there is a simple solution and hope to find the answers here.

  Thank you very much!

  Some printers C4780 left the factory with a default misconfiguration.  This could be the reason why you can not see the hpsetup network.  Here is an updated set of instructions for manually adding the C4780 to a Mac:

  Part 1 - Get the printer in Ad-Hoc Mode Wireless

  (1) turn on the printer.

  (2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right).  Press and release the following touch buttons in order:

  top left,

  bottom-left,

  top left,

  top left.

  (3) you should see the internal menu of printers.  Press the right button down to select 'Service Menu'.  Press OK (lower-left).

  4) press the lower button right until you see "Reset Menu".  Press OK (lower-left).

  5) press the lower button right until you see "half full".  Press OK (lower-left).

  (6) after a few seconds, the printer turns off.  Press the power button to turn on the printer.  It is now reset with the correct default network settings.

  (7) turn on the radio:

  Press the Scan button to get the wireless settings

  Select wireless Menu

  Select wireless settings

  Select Enable Wireless to turn on the radio.

  Part 2 - run the Wireless Setup Wizard

  The printer has now created an ad - hoc network called hpsetup.  To connect to this network on your Mac.

  Check the connection to the printer by opening the printer's internal web page.  You can do this by opening Safari, select bookmarks then ShowAll bookmarks.  On the left pane of Safari, select Hello and on the right, you should see your printer listed.  Double-click your printer and Safari should display the printer's internal web page.

  The printer Web page, select the network tab, and then select Wireless (802.11).  Now press Start the wizard to launch the wireless configuration wizard.

  When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.

  Reconnect your computer to your home network.  Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.

  Finally, install the printer SW.  Since you have Snow Leopard, you don't need the CD that came with the printer.  Instead, open the Print & Fax under System Preferences applet and press the [+] button.  Highlight your printer and click Add.

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

  Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

  Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

• Message "Safari cannot find the server.

  In all these days, I get a message 'Safari cannot find the server' on a regular basis despite the fact that I'm connected to the internet and the server is a real server, such as Google or other sites that I use all the time.

  Is there something funky past with Safari that it would suddenly start happening?

  1 disable Proxies if selected.

  System Preferences > network > advanced > proxies tab

  Unlock the lock if you have to.

  Under 'Select the Protocol', uncheck if checked.

  Click 'OK' and then 'apply '.

  2. If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• "Safari cannot find the server.

  I have not had this happens in another version of Safari, but since the update more recent (9.1.1 on May 17, 2016), I get the following message several times a day: "Safari cannot find the server. Refreshing the page does not help. After I visit some other sites, I am able to connect to those that I had a problem with. Most of the information I could find going back five or more and seems not applicable. It is not necessarily the same sites that don't load. It is random and occurs throughout the day. It's annoying and sometimes embarrassing, but I'm dealing with it (I didn't wish)!

  Does anyone else have this problem? Is this a bug in the latest version of Safari and there at - it an easy fix? Any advice will be greatly appreciated.

  Thank you.

  Hello

  Could be a cookie problem...

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Quit and then restart Safari to test.