cannot fix \boot\bcd y at - it an easy solution for it.

I have a problem with my desktop computer, I ran a full recovery, the power has exploded and now can not back into the computer I boot from a hard drive. The message is \Boot\BCD there is no value in the operating system. Someone has an easy solution for this. Considers that Jim.

Hello

If you perform a full recovery and were part of the way by doing it when the power went off, there is no operating system installed to correct.

You will have to start the recovery.

See you soon.

Tags: Windows

Similar Questions

  • I have e-mail in the Outbox and cannot send... I receive emails, but cannot send... how someone at - it a solution for this?

    I stuck in Outbox of e-mail... .i can receive but can't send out of the Outbox.  Does anyone have a solution for this?

    have you checked the connection doctor to see if something is wrong with the smtp server

  • Cannot get in touch with anyone to get a solution for reactivation.

    I had to reformat my hard drive due to an infection and now I can not re install vista because the message said she had too much to install. I bought the original Vista Home premium. There is that me using this system, please help.

    Use the Activate by phone and speak to an operator.

    activation by telephone (call of the operator)

    Click the Start button

    in the search box, type

    SLUI 4

    and press the Enter key

    Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

  • After the vista update, the file came out: \boot \BCD with status 0xc000000f. window cannot start and no response my installation dvd

    Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.

    I think you should contact the manufacturer about this problem with the Bios...

    It is usually F2 or delete to enter the Bios / configuration at startup.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows 7 boot CD system recovery cannot fix the Master Boot Record is damaged or missing?

    This question is on the drive that Windows 7 users can make by going to the backup and restore > create a system repair disc, and then burn the disc.

    Windows says that this disk can be used to start the computer. However, you will not necessarily be able to boot your Windows 7 operating system from the hard drive. When I had a problem recently (shut down system and on reboot I got a message BACK that says "Boot MGR missing") this disc is not to try to do a repair. In the system recovery Menu, you see here when you start the CD:

    http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery...

    I chose "Startup Repair" and he couldn't fix anything. I ended up cloning of my hard disk from a backup.

    Of http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7

    "Are there problems that Startup Repair cannot fix?

    Startup Repair can only fix certain problems, such as missing or damaged system files. He can't fix the failures of hardware, such as a failing hard disk or incompatible memory, nor it protects against virus attacks.

    Startup Repair is not designed to fix Windows installation problems, is not a backup tool, so it cannot help you recover personal files, such as photos or documents. To help protect your computer, back up your system and your files regularly. For more information, search for "backup" in Windows Help and Support. »

    So here's my question: how to create a bootable CD that has everything you need to fix the Master Boot Record, whereas in case your startup files are damaged, altered, or deleted (and of course, you can not start your system from the hard drive) it will be either fix the files on the hard disk or at least still start your operating system on your hard drive?

    To answer my own question (which becomes a habit on this forum): http://www.sevenforums.com/tutorials/20864-mbr-restore-windows-7-master-boot-record.html

    It turns out that the repair CD Windows 7 Sytem that I had done was the right tool for the job but I didn't know how to use it. The above link explains how to use the command prompt window to repair the boot record.

    Other advice, I had was to have used the "Startup Repair" option in the Tools menu of recovery after launching the repair CD, but then he runs three times. For some reason, it takes three times to run before it can solve the problem. I think that the command prompt window method is probably more reliable.

  • When the computer is turned on, it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c.

    Original title: 0x000014c File: \Boot\BCD

    I have a Dell Latitude E5400 running Vista Basic. Just replaced disc and ran all the diagnosis is good. When I turn on it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c Info: an error occurred trying to read the boot configuration data. After I ran the diagnostics, he said that all tests passed but and if I wanted to continue with more, I said no and we say "Error" "SYSTEM_ERROR this system is not recognized as a Dell PC support. These diagnostics cannot be run on unsupported systems. "Then there's an OK box. How can I possibly fix. It is laptop of my child and I would like to fix it for him for the school. I have restore Dell custom factory integration CD that came with his laptop. It is said that "it is the Dell CD of CFI restore disc. I really don't want to ruin it. I don't want to run this disk and then was not the driver for it and she will not be able to surf the net or something like that. If anyone has an idea please let me know. Thank you!

    Hi Maddy,

    This problem may occur if the Windows startup files are damaged or missing.

    If your computer has integrated system recovery options, you can try to perform the Startup Repair and check if it helps.

    If it fails, you must have a Windows Vista installation disc and try to parade Startup Repair boot from the disc.

    If the problem persists, try the steps in the article to rebuild BCD, boot from the installation disc.

    Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

    Because you replaced the hard drive, you can also get in contact with the Dell helpdesk for assistance.

    Hope the helps of information.

  • Satellite L300-147 - windows fails to load \Boot\BCD

    When I turn on my laptop windows will not load. I do not have installation discs and I can not load in safe mode or anything. The file is \Boot\BCD status is 0x000000f. The info is "an error occurred trying to read the boot configuration data.

    Can you help me please?
    Thank you

    You can enter advanced startup settings with F8 at the start?
    Is option fix my computer available?

  • Re: Visa does not start - \boot\bcd missing required information

    This morning, I tried to start Windows Vista on my Satellite Pro, and I get the following text appears on the screen: -.

    ----------------------------------
    Windows Boot Manager
    ----------------------------------

    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert your Windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on 'repair the youe computer.'

    If you do not have the disk, contact your manufactuer of computer or the system administrator.

    File: \Boot\BCD

    Status: 0xc000000d

    Info: The Windows Boot Configuration data file is missing required information

    -----
    ENTER = continue ESC = exit
    -----

    I found something similar on the Microsoft KnowledgeBase (http://support.microsoft.com/kb/927391), but according to the Windows Vista boot, all the proposed solutions require the installation of Vista media and I have just the recovery CD Toshiba base.

    When I try to boot my Toshiba Recovery CD, if I select "English (Windows Vista)" in the menu and go to the settings, the only selectable option is a scroll bar to choose what size I want to partition - for the option "Expert Mode: retrieves WinRE and the OS for the readers of the FIRST installation of TOSHIBA without affecting additional data disc" is grayed out.

    All I can do with the Toshiba Recovery CD is format the drive and lose all my data.

    I have a USB enclosure external that I put the disc in, and I have an XP machine that I can plug it in, then might be able to backup the drive but really the best option would be a way to fix rather than formatting.

    Does anyone have suggestions on how this can be repaired without the CD of Installation of Vista? Thanks in advance :)

    The Toshiba Recovery disk is not the same as the Microsoft Vista disc!
    Recovery disk contains an image that will not be able to repair your computer.

    The error message indicates that the Boot Manager is damaged or it s damage and you will need to boot from the ORIGINAL Microsoft vista DVD to repair it.

    If you don t have such a MS Vista DVD then I n t see chances to repair the operating system.
    So in this case, you need to reinstall the OS using the recovery disk.

    By the way; What happens if you press F8, immediately after the laptop has been started?

  • Xc0000225 Boot\BCD error 0 after factory restore

    So I recently did a restore of the configuration system once the OS has been fairly well watered on the PC of my mother.  I don't know what someone did to her the last time that they 'fixed', but kept getting tons of errors and do not load the system under profiles admin processes.

    The FIRST restory facotry was 'OK' he reinstalled the operating system, but unfortunately, a lot of mistakes that were there before, were still there this time... I thought it was weird... So I did another restore to factory image...

    That's when things went downhill even faster. Now, he is yet to start windows and I get errors xc0000225 Boot\BCD 0 right on turn on the machine after loading the BIOS...

    I started in the recovery partition and pulled the top quite prompt a chkdsk, which returned well... google the error and the attempt bootrec /rebuildbcd - he found the BONES, I have a key and press ENTER, restarted with fingers crossed and got the same error...  Tried to do /scanos bootrec after that, just to see if it took, and it did not find the OS...

    I googled some more and he was leading define me active partitions and all that... which makes me nervous in doing this... By looking at the partitions, the two were leaving them C: & D: are defined as 'primary', which I think might be a problem? But not sure... and fear to disconnected D: partition as primary, in the case where I need to start again in the recovery disk...

    I made another return to settings repair factory (maybe I should stop doing those?) ... and it is me giving the erorr and bootrec /scanos find the installtion windows on the C: drive. do you have an other /rebuildbcd and rebooted... even the boot errors... have you an other /scanos after that... once again not stated no identified windows installation.

    If the thoughts? Should I do another restore, then work with partitions?

    Hello

    You can create the Windows 7 installation disc (or install a USB Flash drive if your laptop supports booting from USB) yourself using another PC.  Download the Image file from the link below and save it in your downloads folder - the Windows 7 image source is Digital River).

    Windows 7 Home Premium 64 bit SP1.

    To create an installation disc, use an application like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

    Or you can use an application such as Rufus to create an installer USB bootable Windows 7 - minimum size for the flash player flash drive is 4 GB.

    When creating, tap away at the esc you key start Notepad to open the Start Menu.  Insert the disc to install Windows 7 (or USB stick).  Select the menu of Boot Options ( f9 ).  Use the arrow keys to select the optical drive (or USB key) and press ENTER.

    During installation, enter the Windows activation key found on the label of the COA in the request and one time installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load normally delivered with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    You may need, additional drivers and software are in entering either the complete model number or product of your laptop no here.

    Best regards

    DP - K

  • Pavilion G6 does not (Win7). Boot\BCD error, status 0xc0000225

    Hello

    My 4 month old Pavilion G6-2155sf cannot start. Normal start-up it is just stuck on the windows logo.

    If I press F11 I get this message:

    "Unable to start Windows. A recent hardware or software change might be the
    cause. To solve the problem:

    1. Insert your Windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on "Repair your computer."

    If you do not have the disk, contact your system administrator or your computer
    manufacturer for assistance.

    File: \Boot\BCD

    Situation: 0xc0000225

    Info: an error occurred trying to read the boot configuration data. »

    Also, after pressing F2, I did a quick test drive and I got this result:
    DST short: FAILURE

    I'm off to my memory of end of study, internship next week and this computer is my tool, please help me

    Thank you for your time,

    Guillaume Belouch

    PS: No modification/installation of software or material or anything like that was made last week. Also computer had no access to the internet for a week, so I doubt that it can be a virus.

    P/N: B7G02EA #ABF

    S/N: {removed privacy}

    Windows 7

    Hello

    Unfortunately it would look as the volume is indeed corrupt, which coupled with the error of the DST, would tend to confirm that the drive has indeed failed.

    Now my best suggestion would be to contact HP immediately and get the HARD drive replaced under warranty - make sure you always have a set of recovery discs/media to reinstall the operating system on the new drive, if you have not, you should be able to order it at the same time.

    Kind regards

    DP - K

  • Boot/bcd error and no vista startup disk.

    I have vista 64. An automatic update downloaded sp2 and since then I get errror Boot/bcd. I have no bootable cd. Failed to get the manufacturer as computer is 3 years old and was a customized version of a society. I tried to use my laptop dvd backup but does not start.

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

    Microsoft free support for Vista SP2 at the link above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    How to get Vista recovery Media:

    Borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it's decent of Microsoft to introduce Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    At soon Mick Murphy - Microsoft partner

  • 0x000000f of error \boot\bcd

    Laptop Asus G1 series

    Windows is unable to read the boot configuration data
    0x000000f of error \boot\bcd

    said to insert installation disk but all I have is the asus recovery disc?

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows 7 problem, I need help missing \Boot\BCD

    HII all,.

    I use Windows 7 is now a month when ago I installed... I use my laptop with no problems... But today, when I turned on, I got a black window with messeg...

    WINDOW BOOT MANAGER

    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert your windows installation disc and restart your computer.
    2. choose your language settings, and then click Next
    3. click on repair your computer

    If you do not have the disk, contact your computer manufacturer or the system administrator for assistance

    File: \Boot\BCD

    Status: 0 xC0000001

    Info: An error occurred trying to read the boot configuration data.

    So that's what I get when I turn on my lap top

    So I try to put the DVD for windows 7 and install again, but I get this error again

    \Boot\Bcd is corrupt abd unreadable.please, run the Chkdsk utility.

    Average BCD Boot Configuration data

    Then I try my best to make all step of microsoft, I found, but does not not so far and I don't know how I can fix this problem can someone help me please?

    First of all, you have to work to Win 7. My problem was on a desktop, not a laptop. I also assume that you do not have many HD with dual-boot OS partitions. Just reconfigure your hardware & BIOS to the same thing when you installed Win 7 work. If it works, then perform the utility thing.

    I use VistaBootPro to the BCD but try checking on Easy BCD (its free). Start loading changed with Vista. I think that his startup loading posing problem. For a disk bootable for the restoration of files, I use Paragon Hd Mgr, but you can find some freebees with searches on the web.

    Chance.

  • FILE: \BOOT \BCD - formatted status 0xc000000f for latpop error

    I formatted the hard drive of my laptop and has been installing windows 7 when it crashed at halfway.

    Now when I restart the computer its give the FILE: \BOOT \BCD - status 0xc000000f error.
    I tried recovery to start by inserting the windows startup disk, but as the system has no any OS, it is not repairable.  Tried the disc start recovery and orders bootrec quick functions.
    Can anyone suggest how I can fix it. Or is it simply because my laptop currently has no OS and thus this error?

    Test your hard drive for errors. If you have sector errors near the front or at the beginning of the disk, this could be the cause.

    Hard drive test - CD Bootable:
    Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    J W Stuart: http://www.pagestart.com

  • sfc/scannow cannot fix corrupted files windows 8. DISM / /restorehealth//cleanup-online image does not work! Any help appreciated.

    Hello

    I can't try to repair the corrupted files on my Sony VAIO laptop to Windows 8. I hope someone can help me solve my problems. I would really like to know how to fix these problems I'm having. It really gets me.  If ever I have similar problems in the future.
    All my drivers are up to date. I'm pretty confident that's not a malware issue. I take care of my line on activities that could infect my computer. Although I'm not 100% that excludes. I use Mcafee security Suite (fully updated and free with my broadband package). No other scanners time real AV are running. I However sometimes use a registry cleaner, after installation and installation of various programs. but I only use the default methods, never the registry COMPLETE cleaning cleaning method. In my view, these could create problems if used files. I also defragment my HARD drive of 1 TB at least once a week.
    DISM / / cleanup-image online /restorehealth/ also is not working error message and log files can be found below!
    I ran sfc/scannow and several times,
    whenever I get the error message stating:
    Windows resource protection found corrupt files but was unsable to correct some
    of them. Details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper.
    For example C:\windows\logs\cbs\cbs.log. Note that iis logging currently not
    supported in offline maintenance scenarios.
    When I reboot win 8 after running sfc/scannow. Windows 8 shows that it is far from my system of up to 100%
    It charges fine. I have run the sfc/scannow, and then he did exactly the same thing. I reboot and it updates my system. but does not not my files corrupted!
    CHKDSK /F also freezes 27%. But when I starts in the my Sony VAIO #1 recovery disk and run diagnostics hardware HARD drive repair tool to try to fix the sectors defective etc on my HARD drive
    which works 100% and says there is NO problem!
    Here are the files of newspapers that I can access. I have to admit, now, that I do not understand them.
    even after much reading online:
    20/07/2013
    sfc/scannow eror message =
    Windows resource protection found corrupt files
    but has been unable to find some
    of them. Details are provided in the CBS.log newspaper
    windir\Logs\CBS\CBS.log for example C:/windows\Logs\CBS\CBS.log.
    Note that logging is not currently supported in offline scenarios.
    (ACCESS DENIED) when I try to open the C:/windows\Logs\CBS\CBS.log log file.
    DISM / online/cleanup-image /restorehealth/
    21/07/2013 of the log files and error messages
    0x800f081f
    the source file is not found
    Use the source option to specify the location
    the files that are needed to restore the function. To learn more
    information on the specification of a location of the source,
    See http://go.microsoft/fwlink/?linkid=243077
    The DISM log file can be found at C:\windows\Logs\DISM\dism.log
    I hope that I can help to solve the problems of thses
    concerning
    How to run the command "SFC/scannow" at startup or in Windows 8
    Information
    This will show you how the sfc/scannow command to start or in Windows 8 in an attempt to trouble altered or modified system files.

    Tip
    If you get the error that Windows resource protection could not start the Repair Service when you try to run the SFC, then make sure that the Windows Modules Installer service is active and set to Manual.

    Services - Start, Stop and disable in Windows 8

    If SFC is unable to repair the system files corrupted because the Bank (source) is damaged, then you could run the Dism/online/Cleanup-Image /RestoreHealth command to set the Windows component store corruption and then then try to re-run the SFC scan.

    OPTION ONE

    To run the SFC/SCANNOW command. at startup


    1. open a prompt at startup.

    2 in the command prompt, type diskpart and press ENTER, and then type the size of the list and press ENTER. (see screenshot below)



    3 make Act your boot drive drive letters (ex: 350 MB "System Reserved" partition) and the drive of Windows 8, type Exit , and then press ENTER. (see screenshot above)
    NOTE: If you do not a "system Reserved" partition and are not multi-boot with other operating system, then the boot drive and the drive of Windows 8 may be the same drive letter.

    4 in the command prompt, type the following command and press enter. (see screenshot below)
    NOTE: , You will see a blinking cursor at the prompt to the end. It will take a while to finish running though.

    sfc/scannow damaged = C: \ /offwindir = D:\windows

    Note
    You need to replace the the drive letter of the partition or volume where your Startup system files are stored in the offbootdir = C: part of the order above instead.

    You need to replace the letter of your partition or volume Windows 8 in the offwindir = D: is part of the above command instead.



    5 when the analysis is finished, I hope you will see an everything is ok message as below.


    6 close the command prompt and restart the computer to start Windows 8.

    Note
    If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

    If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

    If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file system occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

    If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

    SECOND OPTION

    To run the SFC/scannow command in Windows 8


    1. open an elevated command prompt in Windows 8.

    2 in the elevated command prompt, type sfc/scannow , and then press enter. (see screenshot below)
    NOTE: It may take some time to complete the race.



    3 when the analysis is finished, I hope you will see that all is ok message as the screenshot below.
    NOTE: Fortunately CFS was able to repair my files automatically damaged system.

    Note
    If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

    If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

    If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

    If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

    OPTION THREE

    How to see and read that only "CFS" Scan results from CBS. JOURNAL

    NOTE: SFC when is running, it records its actions in the C:\Windows\Logs\CBS\CBS.log. The steps of this option will show you how to view only specific SFC entries with the [SR] tags in the CBS.log newspaper. This can be useful to show you what files SFC couldn't fix automatically if you want to try and manually change them.

    1. open an elevated command prompt in Windows 8.

    2 in the elevated command prompt, copy and paste the following command and press enter.
    NOTE: This will place a file sfcdetails.txt on your desktop with only the SFC scan details of the results of the CBS. Log in this.

    Code:
    findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt
    
    3 close the elevated command prompt.

    4. open the file on your desktop to see the SFC sfcdetails.txt analysis details in convertible bonds. NEWSPAPER.

    5 when you are finished, you can safely remove the sfcdetails.txt file later if you wish.

    Tip
    If you need to replace a corrupted system file that SFC cannot fix, this will show you how to:

    If you have many files are corrupted, then run Dism/online/Cleanup-Image /RestoreHealth to repair any component store corruption, restart the PC after and try the sfc/scannow command.

    If you have only a little, then you could manually extract a new copy directly from your installation of Windows 8 DVD or USB thumb drive, or ISO if file in a virtual machine.

    Check out the Windows 7 Installation DVD files

Maybe you are looking for

  • Upgrade SSD for Portege Z930

    Hello Any who tried to Z930 SSD update?You are looking for information, they seem to use interface mSATA - mini PCI-E as conectors. No specific information on the drive inside? I intend to bring this beauty on the machine:http://www.NotebookReview.co

  • Links in various applications more open Firefox 3.6.3. What has changed?

    Before the update of Firefox, clicking on a link in my applications (for example: MS Office 2000, Secure Shell) would trigger the opening of Firefox and view the Web site. After the upgrade process, Firefox does not open. Must open Firefox and paste

  • VISTA QUESTION

    I have a Gateway laptop with specs: Microsoft Windows Vista, Intel Core 2 Duo processor t6400, 2 mb l2 cache, 2 GHz, 800 MHz Memory: 4 GB DDR2Video: Mobile Intel Graphics Media Accelerator 4500MHDHard drive: 320 GB Will be of Duty 4 Modern Warfare ga

  • Question DRAM 2651XM

    Hello I have a 2651XM router that has been shipped with a 128 MB RAM. I want to upgrade this to 256 MB. I have a 15 - 8693-01 memory card already present on the router. I inserted the DRAM 128 card obtained from cisco, but have some problems here...

  • HP Color Laserjet Pro M252 - not to print a PDF file

    Hey Adobe Forum,I have a problem with a M252 Pro of Laserjet of color HP which will not print all PDF documents. When you try to print a PDF file, the document is idling to "print...". ».Information about the current configuration:1. the customer is