Cannot get device HP PRINTER DESKJET 3745 software

Similar Questions

• New Deskjet F4185 All in One or any other printer Deskjet F4185 software needed, Pls!

  Hello world

  Can someone help me get a new Deskjet F4185 or any other printer Deskjet F4185 software.

  Your recommendation is much appreciated. Thank you.

  Hello andruanus,

  Take a look at this link.

  HP Deskjet F4185 all-in-One color inkjet - printer / copier / scanner

• Cannot get HP C7280 print wirelessly on OS 10.5.8

  Hello

  I can get the printer to connect to the network, but my mac won't pick it up at the airport, and when I put the IP address of the printer in safari, that it does not connect.

  I tried every index on the line for this problem and that would be very grateful for any help!

  Thank you

  Uninstall the HP software with option scrubber as follows:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Finally, download and install the software from here.

• Cannot get epson PX710W printer driver to recognize

  I downloaded the correct driver and software for my own site of Epson printer (cannot find the original disc).  By the time we reach the driver download windows gives the message 'not safe to download' and will not allow the installation of driver.  What can I to this topic please?

  Hi Barbara,

  As long as you have driver from the Epson site, you should be able to ignore/bypass the security warning and continue with the installation of the driver.

  You can try again from this source:

  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-IE&data=emW65r3CP2EeXw1udpNFrsPEhQlxA1kwZGC69ZdLzjYU003D&TC=6

• various error messages - cannot get old matrix printer that works with xp for the printer in windows 7

  I have a new pc with windows 7 - I have an old panasonic kxp 3696 PARALLEL port printer that works fine with xp - I bought a decoder directional bi to convert the port PARALLEL to the usb port and is connected to my lenovo m81 - computer came with pre installed epson fx series 1 136 driver in the Inbox (this is the driver of windows 7 recommended by panasonic for this printer)-I managed to print a test page and something of Word-, I then downloaded our accounting software and added an hp printer - in the process, I removed the usb connection and later reinstalled anbother port - since then I could not print all documents or bills - I uninstalled and reinstalled the printer - I deleted and created ports - initially the docs crammed into a queue for printing - I then changed the setting to print online and print test page new - now I send documents to print and they do not appear in the print queue - it seems to be multiple of the printer on the computer copies when I reinstall - also get a message that is not network printer (the printer is connected by usb) and another message00? 0000? etc.

  I used the printer add - local port - function and then create a new port that I called epson - someone can talk me through the process in detail.

  specifically what port should I use (local or create new)? I used the port usb - is that correct?

  If I print a test page? I would be able to print documents?

  If I get epson 1 and exemplary epson 2 - has actually deleted the printer driver?

  Please note I have contacted panasonic who can't stand the printer-I called epson that does not support the old drivers and lenovo that says it's a software problem talk to microsoft.

  We also run windows 7 64 bit in xp for the printer mode if so? How?

  Hello

  I suggest you to uninstall the printer drivers and then use the driver file that you want to install by using the procedure - below

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file that you have on the computer, and then click OK. Now, check if the printer is correctly installed.

  I hope this helps.

• Cannot get my wireless printer to print from my laptop

  I'm trying to get my HP Photosmart Premium Print-Scan-Copy all in one printer C310A to print from my PC Compac Presario CQ57 - 229 portable WM.  Now, my problem was first of all that the regular download a driver will not work on this combination because the computer with processor AMD Dual Core C-50 if a fix that has been downloaded also.  It worked well for about 2 days, but now it has stopped printing from computer.  I use 64 bit Windows 7 system.  The printer prints fine from a memory card or the scanner but if I try to print from anything on the computer, such as texts or images, it won't do anything.  It is my default printer and everything what I am trying to print goes to the printer but it will not print and when I check the printer in my control panel, it is verified that he has need of troubleshooting.  I'm at the end of my knowledge and the ability to correct this problem.  Help!

  All off

  Unplug the printer

  turn on the pc

  uninstall the printer (drivers)

  restart the pc

  Reinstall the drivers (printer) you may have downloaded the correct drivers of HP's official WEBSITE.

  Perform a test.

  I hope this helps - I have a HP driver if you want to try, leave your email

• Satellite L45-S7419 - cannot get device WLAN working for XP

  Hello all and ty in advance for anyone who can help.

  I have a serious issue that I have not been able to understand and finally just abandoned.

  My father has a Satellite L45-S7419 which has wifi 802. 11 b/g, built in at Bestbuy which came with Vista there is quite some time and I finally had the time to put XP on it (which, in itself, was a challenge) and I am unable to get drivers that work with the built-in Wifi.

  In Device Manager, it shows the device with a yellow "?" and no driver installed. Unfortunately, Toshiba has no drivers for XP, but fortunately (I thought at the time) realtek had drivers for RTL8187B. Who called on the site - (RTL8187B driver auto Installer Windows (Win2K/WinXP/Vista support), Win2K/WinXP/Vista driver ver.1158 1158 20/11/2009)

  I installed the drivers, but the device is not simply either recongize or it some how is not the correct drivers, because the appliance does not work.

  Does anyone have an idea what I can do? I tried everything that I can with my knowledge. I tried another way to install and uninstall the device first Manager device, installed the drivers then that the "new Device Manager" jumped upward and the device of RT8187B popped up, but still get the "new hardware found" and the right afterwards "the unit works may not properly" or something similar. As if I had just install the driver itself.

  Any help would be appreciated wildly. Ty!

  Hello

  Have you checked if the WLAN function is? Therefore, you can use the switch of hardware on the laptop and the combination FN + F9.
  Check this box!

  Can you also tell us what version of BIOS is installed on the laptop? In your case, I'd install the latest version of the BIOS. Sometimes, I could here it solves different problems WLAN. It s worth a try! ;)

  I think that, in the worst cases, you must use the preinstalled operating system (Vista). There are all the drivers and tools pre-installed so I m asking you to install another OS. Now, you need to install a large number of drivers and you must spend a lot of time for that so I always prefer the preinstalled operating system.

  Welcome them

• HP deskjet printer: what ink cartridges I get for my printer deskjet HP 2540

  What are the correct ink for my printer.

  Hi ann24,

  Here's what I found for all-in-one printer, HP Deskjet 2540

  under printer Specifications on the HP support page:

  HP black 61

  HP 61 tricolor

  I hope this helps!

• Cannot get LaserJet M175nw print in a network

  I just installed a new 100 Pro M175nw LaserJet printer on my network. However, I am unable to print over the network.

  • The printer is connected to an ethernet cable and configured with a static IP address on the network
  • I use a Windows 7 computer for printing
  • All of the internal functions of the printer work properly for example copy, reports
  • Printers when connected via USB to a computer

  When you use the printer over the network:

  • Digitization of works correctly
  • The integrated mangement of the printer web page works correctly
  • HP Print & Scan Doctor diagnostic tests give the configuration all green ticks
  • Print jobs stay in the queue until they change to an error state.
  • The printer does not recognize the print job at all - no progress message indicating the print on the console document
  • If the printer is in mode 'sleep' it doesn't wake up
  • Print test pages from the installer of HP, the Windows printer properties dialog box, Acrobat Reader and MS Word all fail.
  • All the symptoms remain the same when I turn off the Windows Firewall
  • An another HP LaserJet 2605dn printer on the network will print correctly on a different IP address, but also using the raw format on port 9100.
  • I removed all the drivers for other HP printers in case there was a conflict - no change after you have reinstalled the software.

  Can anyone suggest what I might have forgotten?  Thanks for your help.

  Problem solved.

  Critical steps seem to be:

  • I used the printer management web page (Networking / advanced) to "restore all network settings to their factory default values.
  • I then used the printer console to set the desired TCP/IP configuration - static IP, subnet mask, default gateway. No other changes.
  • The printer then worked correctly.
  • Later, I put the hostname and disabled all network services that I did not - like IPv6, Hello - and the printer continued to work properly.

  The configuration of end result is identical to what I had until I can see - but it works now.

  Thanks for your suggestions along the way.

• Cannot get Officjet j3600 print Flight Sim 2004 flight plans

  commputer recently back from repairs.  the games currently charging and others.  load Mirosoft Flight Sim 2004 and plans of navigation photography to keep them in a folder.  press a and printer did not perform the task.  No apparent problems with all other printing in the form of documents or other tasks of 'print this page' flight sim.

  Help!

  Hi leathernecktanker,

  Please, try the steps among the proposals contained in the Microsoft Knowledge Base article below. I hope that one of the solutions will solve your problem.

  Nothing happens when you try to print the navigation connects in Flight Simulator
  http://support.Microsoft.com/?scid=kb;en-us;894504

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get full screen after update the software Adobe Acrobat reader DC

  After the update to Acrobat Reader DC (mine was made on 8. November, my husband today, 29. (November), we cannot release mode display thefull under normal conditions, ESC does not work and there is no available tools. The only way out of this is to use Ctrl + Alt + Delete to access the task and then manager stop AR, which is very inconvenient.

  Perhaps, Ctrl + L will work.

• Get my HP DeskJet 3745 printer back online.

  I went into the Control Panel, go to printers etc. detailed, just clicked on the icon of the printer, but none of these options can be changed. The green market/stop-light of the printer button will continue to Flash. There is a lot of paper in the tray, ink cartridges are full, the power cord is plugged and the connections between the computer and the printer are good.  Everthing was told that the printer is offline, but how do I get it online. It worked like a charm for most of yesterday, but after trying to print a photo in Google Earth, it stopped working and started to blink. I can't and have cancelled all print in the cache of the printer jobs, but who did not help either. I clearly need help!

  Welcome to the Rubynose forums

  I saw your post on the power light flashes on your Deskjet 3745 and do not print. I would like for you to consult the guide below for the troubleshooting steps that may help!

  Power light flashes

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• print module cannot get the printer device context

  I can't get my printer to work. It seems that the computer does not recognize the printer when I plug. No printer symbol. then, when I try to print a square stands up and says 'printing module cannot get printer device context' I have no idea what this means or what to do about this please help

  You need to get the print vendor drivers.   You can try using a printer driver that converts data of the PDL even that interprets your device, but you should request this information from the company that made the device

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Windows 8 and now cannot get my printer to print. Tried to print a test page, message says "sent to the printer test page", but it does not print.

  I recently downloaded Windows 8 and now cannot get my printer to print.  Tried to print a test page, message says "sent to the printer test page", but it does not print.  Can you help me?

  You have installed the drivers and software for your printer?  Did you go to the printer manufacturer's website to see if they still have 8 available Windows compatible drivers?  If the answer is no, then you must do this before all first I try to print.