Cannot get DTS/multi channel audio via HDMI

Similar Questions

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  All 4 titles are coming as complete blends not divisions. I guess that's a problem with the entrenchment of the channels, but can't see how to fix. Andy

  Is what would you say to my quick thought without following through all the processes after the fact, the sequence settings? My thought is that the sequence settings must be multichannel as you show, but each Adaptive track, so this channel map is routed at your leisure. If this is not the case, already, it would create a new sequence with these settings.

  I try to upload the photo

  

• DTS - HD and Dolby TrueHD audio via HDMI or S/PIDF. Is this possible with HPE-140sc?

  I have an audio DTS - HD and Dolby TrueHD via HDMI or S/PIDF of blu - ray movie? I request because the Nvidia homepage not listed this support function for gtx260 (http://www.nvidia.com/object/3d-vision-requirements.html) and the homepage of Reatek'a is the same for ALC888S (http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=28&Level=5&Conn=4&ProdID=141).  What kind of problems is if there is no support in the HPE-140sc for Dolby TrueHD or DTS - HD audio? 3D-Cinema compatible reading is necessarily I can't find reading compatible sound card 3d video. Is the cheapest solution in this case buying gtx460 if I want to get DTS - HD and Dolby TrueHD audio?

  Pether, I don't think it's possible with the GTX260.

• 8530p - No. 5.1 channel audio on HDMI

  Has anyone got anything else than 2 channels of audio over HDMI on the Elitebook 8530p? I tried different drivers directly from ATI and HP. I tested it on Windows XP x 86 and x 64 Win7. Windows always lists the configuration of stereo audio channels 2 channels. Is this a limitation of the hardware?

  Hi again,

  I don't have a 5.1 system to try to simulate your with on problem with my Probook s 4540.

  However, I did dig a little deeper and found that someone had a similar problem on this forum a year ago. They were able to find a solution that might be useful for:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/No-5-1-channel-sound-output-via-HDMI-only-2-ch-output-why/TD-p/460841

  Good luck!

• No Sound / Audio via HDMI with Satellite P840T

  Hi Forumites,

  I connected my Satellite P840T on my TV via HDMI Panasoni. Video works fine but no sound. The same cable and TV work fine with my laptop Del.

  I have read the forums, and we're talking about going into control panel > Sound > reading tab and selecting device HD Audio for playback, but on my P840T, IT IS No. HD Audio device for the indicated reading.

  I right click and checked the boxes to see the disabled and features show disconnected, but still nothing.
  I have download the latest drivers for the OEM Toshiba Intel HD4000 version show that the P840T seems to have, but still nothing. (The Audio drivers for the HDMI port part of the display driver right?)

  What else can I try other than to wait for the next version of the OEM Toshiba display Intel HD4000 version?

  Thanks in advance
  Mark

  > I have read the forums, and we're talking about going into control panel > Sound > reading tab and selecting device HD Audio for playback, but on my P840T, IT IS No. HD Audio device for the indicated reading.

  .. and what audio playback devices are available next to the speakers?
  In my case it is not peripheral HD audio but the Digital Audio sound called.

  By the way: what system are you using? Have you installed the new Windows or do you use the preinstalled Toshiba system?

• Cannot create the multi channels Tx two USRP-2943Rs Session with driver

  I have problems of implementation of several USRP-2943R devices in tranmist both of their channels at once.  Right now my configuration is a configuration of four chains composed of two devices of RIO.  I am only able to transmit at the same time successfully CH0 and CH1.  I'm creating a session using two devices and my aim is to perform Tx on CH0 via CH3.  In addition, my goal is to use the LabVIEW driver without any synchronization, because I test fix synchronization through post-processing and you want the VI be as simple as possible without the hassle of FPGA programming. I realize has the Simple models OR - USRP Streaming Sync in LabVIEW, but additional synchronization and FPGA programming is too much for such a simple project like mine which would require no synchronization USRP.

  My VI and some screenshots of the error messages resulting is attached.  I am able to succesfully implement multi-channel Rx deals and attached is my multichannel Rx VI.  My question is why I can open and operate a session of Rx mult-channel without problem, while a multi-channel Tx session will give me errors?

  My final goal is to merge my multichannel work Rx VI with a mult-channel Tx VI work for measurements in order to test some synchronization post-processing routines that are performed in Matlab.

  I think that I found a solution to my problem.  I thought to post it here to help others.  It is important to use some sort of device to synchronize several USRPs.  However. I found that you must reset the device by setting the node of reset function blocks that open and session Rx or Tx.  "" If it is not defined, then the ' niUSRP Signal.vi configurethe ID of the specified attribute is not valid for the scope specified (or channel)." error occurs, any circuits that you define.  After the node Reset true and place an empty string for my channels Enabled, all was fine.  Also, a full duplex system you will be only to first log of Rx with a reset of the device, followed by the opening of a session of Tx without a reset of the device.

  One more thing, it is that there seems to be a bug if you feed a Tx process a table whose number of lines does not match the number of channels Tx.  This will result in weird errors funny will disappear only after doing a hard reset of the units.  So, just something to take note of.

  I hope this information will help others and this message can be marked as resolved.

• dv3-2222tx without the audio via hdmi

  I have a HP Dv3-2222tx, and when I conn. Cable HDMI to TV, him dosent sound work, I have chosen in my Audio out HDMI, as well as in the IDT Audio control, I can see on the indicator that it is strong, but can not hear it. I tested already and also cable TV.

  We hope to help

  Hello

  Without the menus are locked.

  But anyway, I have my Nvidia updatede and then it worked.

  Thanx

  Ken

• Dv9260nr HP without the audio via HDMI

  I have had no audio through my HDMI at least a year now without any help from any internet research sources or HP technical support. When I bought my computer laptop, everything worked fine on a year ago sound through HDMI has stopped working. I put the output SPDIF sound as I always did in the past. I have updated my vidio of Nvidia drivers and cannot find archived former drivers for restore. The current driver that I have dated 01/30/09. It is the Nvidia Geforce Go 7600. I've also recently updated my laptop with a clean install of Windows 7 32 bit Ultimate from Vista 64 bit Ultimate. I made this not knowing that there were not any drivers that support Windows 7 for my laptop HP but nevertheless I like working with 7 much better. Anyone else with this problem and maybe a solution? Thank you!

  Hello

  Uninstall your current graphics driver from Nvidia system.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the old driver for Vista:

  NVIDIA GeForce series video Driver here

  I got confirmation from users with the same model that this driver solved that problem.

• Windows 8 audio via hdmi cable does not work on the desktop

  im running windows 8 on a desktop computer I plugged my TV I have the video works fine but my sound does not come through, and I don't have the option start normally with windows 7 and below so I do not know where to find the control panel. Anyone know how I can get it set up to run it. I go to a surround system from Panasonic connected to my TV through hdmi cables.

  Hello

  Thanks for the reply. I'm sorry to know that you are unable to see the high definition Audio Device and other options.

  1. What version of Windows are you using?
  2. What do you see under sound, video and game controllers?

  You can try the above steps through the steps below.

  Method 1

  1. press on Windows Logo key + X. Click on Device Manager.

  2. search for the sound, video and game controllers.

  3. under it, you will find high definition Audio Device.

  4 right-click on it, you will see turn off the option.

  5. click on disable.

  5. again right click on high definition Audio Device to activate.

  Method 2

  1. Press on Windows Logo key + X.  Click on Control Panel.
  2. Click hardware and sound.
  3. Double click on sound.
  4. Under the playback tab, you should see your HDMI device.
  5. Right-click on it and select set as default device.
  6. Click Ok.

  Hopefully now, you will be able to find these options. If the problem persists, get back to us. We will be happy to help you.

• HP Pavilion dv7 will not play audio via HDMI

  Hi I noticed recently that my laptop Pavilion dv7 entertainment will not play sound through the TV. The image is on the tv but its is running through the speakers of the laptop? I never had a problem with it until now. When I open the sound options, the ATI HDMI says it is not connected and it won't let me select it so it is connected? Help, please?

  Best regards, Sez.

  Sez Hi,

  Try to use Recovery Manager to reinstall your graphics driver AMD package as this will also reinstall the driver Audio HDMI AMD - how to use the Recovery Manager to reinstall the software and drivers is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Recovery Manager - Windows Vista

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Cannot get computer to record audio?

  How can I get my Toshiba laptop to record sound when I use Windows Live Movie Maker?

  How can I get my Toshiba laptop to record sound when I use Windows Live Movie Maker?

  ===========================================
  There are so many versions of Movie Maker, he becomes confused
  but I think storytelling is not an option in Windows Live
  Movie Maker.

  Maybe you can use Windows Sound Recorder to create
  an audio file and import it into Live Movie Maker:.

  Windows 7 - audio record with sound recorder
  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  And... it might be interesting to try to install the latest Movie Maker 2012:

  Get Movie Maker
  http://Windows.Microsoft.com/en-us/Windows/get-Movie-Maker-download

  How do I record narration in Movie Maker 2012 and add it to my film
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker-AV/how-to-record-narration-in-Movie-Maker-2012-and/33de1195-6c52-46c4-8cf6-19dbd1f2154c

• Export audio 5.1 hearing to the only multi-channel audio file

  I have problems to export 5.1 audio.  I need to be able to import a 5.1 (or file of 8 channels, if left total right and total is included), one of the channels change individually and export the session to a single. WAV files containing 6 separate channels (or 8).

  So far, I was able to split the original multichannel file to 6 mono files and put them on their own tracks.  But whenever I try to export, I find myself either with 6 channels (but only two with audio on them), or 6 blank channels completely.  I tried all combinations of Options of mixing and master the track routing I can think, but anything will do.

  I use hearing 7.0.0.118.  Help, please.  If you respond, be as specific as possible, because I am a n00b at this.  Thank you.

  You open the mono files in a session multitrack 5.1 and use the surround panner to send them to the appropriate channels?

  What should you do to follow-up that should edit separately? You might be better open audio format multichannel in the display of the waveform change and proceed to any treatment on the track of a he. You will then be able to record on the same multichannel format as the original.

• Need help to configure PP CS5.5 for multi-channel audio playback, using the M-Audio 1010LT card

  I've been hitting my head against the wall, trying to use my output channels of M-audio 1010lt card multichannel sound audio of sequence reading in first Pro CS 5.5.   It works very well in hearing CS 5.5, but not pp!  Probably I'm missing something simple in the installation program.  I configured the master audio 5.1.  Selected Delta M-Audio, ASIO in Preferences Audio Hardware, the value corresponding to the Audio output as shown here:

  

  Here is a picture of the display of sequences showing the Dolby Digital channels and 5.1 audio channels in audio levels masters appear on the right side:

  

  When I use the similar audio settings in hearing CS 5.5 the same Dolby Digital audio track plays back through my output 1010LT channels perfectly.

  What Miss me in the configuration of Premiere Pro!

  Found my problem!  It was my use of a Blackmagic capture format as I was using a BM Decklink HD Extreme card.  When I specified HDV 1080i for a pre-selection everthing worked fine reading of the chronology of the audio tracks through the M-Audio 1010LT.

• M7 want TS no audio via HDMI

  Hello

  When I connect my laptop to my tv sound not coming out of the TV, but there is coming out the pc speakers. It is not a cable problem, as my other computer hp laptop works very well. I can't find a setting to change HDMI audiooutput. Help, please

  caveman1

  HI, thanks for the response. The diagnosis was not seen my hdmi for some reason any. My pc has been inadvertently updated to win 8.1. That fixed the problem, go figure.

  Thanks again.

  Caveman1