Cannot get my CD/DVD player to work

Similar Questions

• Try to get the HD-DVD player to work on the Satellite P100-463

  Hello world.
  I bought this baby the weekend and since I am struggeling trying to get HD-DVDs to work on it. I added the HD_DVD xbox 360 drive, but Power DVD Software Advisor continues to say that the graphic card 9Geforce Go 7900) drivers must be updated to read HD-DVD content. Now, there is no available such as newer driver installed (84.0?)

  Can someone please advise if the card supports protection hdcp anyway? Maybe my problem is another source.
  Thanks for the tips.

  Wait do you use player designed for the Xbox in the Satellite P100?
  Hmm, I m surprised that this device is compatible with the Toshiba laptop.
  Anyway, as far as I know you need a special DVD player to play and watch HD-DVD on the laptop.
  A simple WinDVD does not support the new HD-DVD.

  By the way: I know a Toshiba model that shipped with the HD_DVD drive.
  It was a Qosmio G30 DVD HD model.
  I found a new Nvidia GeForce Go7600 8.3.2.7 Version graphics card driver update in the download section of driver on the Toshiba site
  But I put t know if it s compatible with your card...

• Satellite P100 - cannot get the CD/DVD writer to work under WXP Pro

  Hello

  I recently updated my Satellite P100 - 188 (PSPA3E) to run Windows XP Pro SP2.

  I can't have the CD/DVD writer to work well. I looked on the downloads page, but there seems to be nothing. It reads the CD/dvd, but allow me to write to them. If I put a blank CD in nothing happens.

  Someone has ideas how to get this working again?

  Thanks in advance...

  Kind regards

  Matt

  Hi Matt

  Maybe you should install like Nero burning software. Original Toshiba image (WXP MCE) it was an engraving Sonic RecordNow software pre-installed.

• DVD player not working not not since upgrading to Windows 10?

  Improved to win 10 of Win 7 and now cannot get my DVD player to work. Checked info from Device Manager which advises (Windows cannot start this hardware device because its configuration in the registry information is incomplete or damaged (code 19).) I tried to remove and reinstall the DVD player, but the error message still appears. Any ideas of how to solve my problem?
  My last resort would be to roll back to Windows 7 if I can't figure it out. : confused:

  I have the same problem with my SATELLITE A500 - 19(d) is code19 drivers must not be installed correctly.

• Qosmio X 500-148 - DVD Launcher cannot detect a Toshiba DVD player

  I had some problems with my Qosmio X 500 - 148 not long after the purchase, resulting in the deletion of hard drives and software reinstalled. DVD playback works ok, but I can't get the Blu - ray to work. When I insert a Blu - ray disc, I get a message "Toshiba DVD Launcher cannot detect a TOSHIBA DVD PLAYER". I guess I need to download and reinstall the Blu - ray software, but can't seem to locate it or any other solution anywhere.

  The useful suggestions to solve the problem would be welcome.

  Hi jsgskydive,

  Toshiba DVD playback software, you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Qosmio > Qosmio X series > Qosmio X 500

  Then do a search for X 500 model and you can find a DVD player to download.

  Check this box!

• DVD player not working not not with win 8.1

  Hello. I have the HP pavilion 15-e020TU laptop. My DVD player has worked with windows 7 and windows 8. After the upgrade to windows 8.1, the DVD player does not work. The Windows Device Manager find the DVD player, but represents a brand yellow error. I chose "update driver software" and then "automatically search for updates of driver software". Then the name changed from 'Mitsumi CD drive' to 'hp DVD A DU8A5SH'. And still does not. I installed the update of the firmware from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt displays "error: no readers mitsumi found.» What can I do now?

  Hello:

  Try each of the steps in resolution 2, 3, 4 & 5 on the link below.

  One of them normally solves the problem.

  http://support.Microsoft.com/kb/314060

• I can't get Macromedia Authorware Web Player to work.

  Running Vista on a 64-bit Windows computer. I can't get Macromedia Authorware Web Player to work. When I download the program I've ever seen the "film playing below. I see only a bar saying "loading files" when I try to open a file in Authorware.

  If you are using IE7 or IE8 and Vista then try to add adobe.com to the trusted sites list. This will make the site open to disable protected mode. You can delete the site from the list of trusted sites once you're done, if you wish. It should not affect other content that you are running.

  Mike

• Re: Satellite L500D - cannot get the optical disc drive to work

  Back again with this problem and this thread began again as it appears the original thread has been 'locked' ~ been awhile so it is aceptable.

  I think that the TS-L633C TSST DVD/CD RW on my system is in fact die slowly, now I can not yet use Toshiba DVD PLAYER to watch DVDs. See http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=204206#204206 for the story.

  Using the windows tool "FixIt" on a blank DVD got all green ticks OK but when I went to play DVDs ~ nothing!

  How the reader '' hunt '' when I put any DVD in it and then fails, suggests that the reader was not not little by little and I must be looking for a new. Shame really, because I haven't used at all, hence the long time between my responses on this forum.

  So OK, where from here.

  Nearest service center is a 5 hour drive, and I will send this laptop for my financial and other stuff done busy resourses is more allow me to simply replace this system and start from scratch.

  I'm ready to buy another drive, but cannot locate any online (new) and I am not aware if there are other brands / types which would be appropriate.

  Toshiba Satellite L500D-PSLKOA-00U009 - TSST TS-L633C DVD/CD RW

  Any ideas anyone?

  To be honest, the situation is strange to me, and I think that you spent too long with all this.

  In my opinion, you have to manage fast. The fist issue is: either defective or not ODD?
  The reasons why it doesn't work with a Toshiba DVD player is not relevant at all. You can test it with VLC media player to see how it works.

  So I recommend you to follow:
  You should not change your preinstalled operating system that you use for work or anything else. Try to get another HARD drive. Swap and install the OS by using recovery disc. Test the functionality of the WEIRD with the settings to be sure that the problem persists or not.

  In the end, if you are willing to trade the player s check Manual of use and you will be find the list of all compatible optical disc readers you can use with your model of laptop.

• DVD player not working not not Satellite Pro A100 - Code 37 error

  Hello

  Someone help on this?

  I have an A-100 and the DVD player has stopped working in XP. I checked the Device Manager and see XP disc but returns this error "Windows cannot initialize the device of this hardware driver. (Code 37) »

  I also noticed that ASAPI.sys is not running in the Task Manager.

  I'm guessing this has something to do with the problem.

  I tried to reinstall the device drivers, but this made no difference. Any suggestions?

  Hello

  Error code 37 means the driver returned failure from its DriverEntry routine.
  You can try to delete the driver from Device Manager and rebooted the new OS should recognize the drive device and initialize the driver again.

  If this is not enough, try this procedure:
  Run REGEDIT and open the following folders:

  HKEY_LOCAL_MACHINE
  -> SYSTEM
  -> CurrentControlSet
  -> Control
  -> Class
  {4D36E965-E325-11CE-BFC1-08002BE10318}

  After you click {4D36E965-E325-11CE-BFC1-08002BE10318} you should see two settings on the right side:
  "Upperfilters".
  'Lowerfilters '.

  Click on each of them, press DELETE, and then click YES.

  Then restart the laptop and see if it was useful.

• Satellite L - cannot access a Toshiba DVD player

  My laptop Satellite Pro L-series came with windows and upgrade to Win 7, which I am now running. I tried to read a disc that I burned on a comptuer spent, but tells me it's the wrong region (huh?) - my region is set to 4. So I gave up on it for the Nuncio and switched to the Toshiba DVD player.
  When I try to open it, I get a message that module (s) is / are missing. If the restart does not work, re - install the application.

  How can I do this?
  TIA

  Hi billym,.

  Normally, you can download a newer version from the official website of Toshiba DVD player if search you for downloads available for your laptop model:
  http://EU.computers.Toshiba-Europe.com

  But if you have a DVD with a different region code, you need to change the region code of your CD/DVD drive (Device Manager > properties of the CD/DVD drive).

  But don t forget that region code can be changed 4 times

• Re: Portege R600-10 q - Toshiba DVD Player a work stoppage

  Hello

  Please help me,

  I cannot use the DVD from Toshiba drive, whenever I open it, it appears windows windows saying that the application has stop working...

  When I see the error report appears "crash app"...

  I went to the Toshiba site to upgrade BIOS and did a Toshiba DVD Player download a new version and the problem remains the same...

  What can I do?

  Thanks and best regards,

  Hugo Cunha

  Hello

  I think it s just a software problem.
  There must be something wrong with your operating system, because in my case everything works correctly.

  To be honest I n don't know what's wrong with your Toshiba drive preinstalled and I think that most people can provide only a few suggestions, so here's my suggestion.

  First update the BONE to this early time.
  Then remove the old Toshiba DVD player applications.
  Reboot the laptop and then clean the BONES and the registry using CCleaner (free tool).
  Download the most recent DVD Toshiba drive tool (at that time v 1.40.20), then install again.

  Usually, this should help

• Burning DVDs in DVD player not working not

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  ============================================
  Burn a video DVD that will play in a free-standing DVD player you
  need software for DVD creation... the only version of Windows XP that
  included this option was the "Windows XP Media Center Edition 2005.

  See the following article:

  Movie Maker 2 and DVD burning software-
  Media Center 2005 Edition
  http://www.Papajohn.org/mm2-DVD-MCE.html

  Perhaps the following freeware should help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• DVD player not working not not on Satellite Pro U400-142

  My DVD player does not work. I insert a disc, you can hear the drive works for some time, but then nothing happens. I checked the Device Manager' - under readers of CD-ROM/DVD-ROM it shows: MAST * A DVD-RAM UJ862AS, but there is a black exclamation point in a yellow circle next to it. I opened the dialog box 'Properties' and under the status of the device, he wrote:

  "Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I would try try to resolve the problem by reinstalling the driver. I checked Toshiba site for the driver, but can't find it.

  I would be very grateful if someone could give me some ideas on how to sove this problem.

  Thank you

  P

  What you can do is follow:
  Remove the optical drive from Device Manager drive, restart your laptop.
  The reader should be acknowledged and properly installed. If the same thing happens again try it please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• DVD player not working not not on Sat 1800-614

  Hello

  I bought a Satellite 1800 614 3 years ago, provided with a DVD player. At this time there is no problem to read the DVD. I did not use it for a while and when I tried to use it I discovered that it does not read new DVD, I can see the movie but the two images and audios are dispersed and disrupted last year. It only works with the old DVD (2001-2002) and DVX and so on...

  I was told that it is because they changed the format of DVD or something like that. Can you help me to fix it? Is it possible to update the BIOS any help? Maybe the firmware? You know the one that I need and where I can find it? I tried to update the drivers for DVD but it seems that he does not accept the change. Do you know how to update the drivers too?

  THANKS TO ANYONE WHO CAN HELP! I HAD THIS DVD PLAYER AND I NEVER GOT TO USE IT!

  Hello

  I put t know if you tried, but you can try to install some beyond news who is responsible for playing movies on dvd (files)

• Satellite A200: DVD Player stop working

  What should do?
  My dvd does not work. I'm on Vista home laptop.
  I tried to do system restore and System Restore does not work.
  I love this phone, but I will blow him away when there are problem so.

  I have problem with web cam but I solved it...

  Hello

  Have you tried to boot from the recovery CD Toshiba?
  Try to do it. If the CD/DVD drive may start on the recovery CD and then everything goes well with the material.
  Sometimes the CD / DVD cannot be read by incorrect registry entries.

  Then try to reinstall the operating system and check if the drive can handle the Toshibas recovery CD!

  If you still not be able to solve your problem to return and we will try to solve it together ;)