Cannot get past Boot Screen manufacturer

Similar Questions

• Satellite C660-106 won't get past boot screen and stops

  Hi all new here

  Well, we had our c660 106 for 2 months now, but the boss has decided to drop about 6 inches high, he stayed on but the led screen is cracked internally as the colors were bleeding on etc, very bad.
  He stayed on until today and ive been screen awards to the top. (it was connected via rgb to my home lcd)

  I had to unplug the laptop and turn it off, but now the problem is when I turn it on it will do initial fire up toshiba black screen where I 0f f2 and f12 options but then immediately turns off completely, we fear now that we have a 1 year old and we have all that she has done on it,
  can I try

  I know that the warranty usually cover as its obvious broken screens and not only failed.
  any help would be brill

  Thank you

  someone at - it an idea?
  see you soon

• Will set up the HP Photosmart 7510 new iMac OSX 10.7.3; Cannot get the home screen appears.

  Instead of the home screen, I get an error message ' no connection: your printer is not connected to a network. " If please connect to a network and try again. "I downloaded the software and latest drivers; my iMac recognizes the new HP printer.  But I must still be able to get the home screen to display on the printer so that I can do the basic settings.  I did the simple troubleshooting suggestions (for example, for printer disconnected from the socket wall and then plugged in;) I restarted the iMac; I uninstalled the software and drivers and reinstalled)... but no change, cannot get the home screen appears.

  The printer turned on, unplug the power to the back of the printer (not the wall) for 30 seconds.

  If this does not work, it seems that your printer is maybe defective.  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• S50 satellite - cannot get Toshiba welcome screen

  Hello

  I have a Toshiba Satellite S50, it s around the age of 6 months. Now, when I turn it on all I get is the screen "Toshiba leading innovation" and that s it.

  It doesn t go past, stay right there. I can't get into the bios, I don't have the original hard drive came with the laptop, I have a 500 GB 2.5 "Toshiba hard drive. I want to put my windows hard disk 8.
  I ve created a bootable USB key with windows 8, set the laptop to boot from USB, changed to the UEFI BOOT, but nothing happens when I restart the laptop. Just on the screen "Toshiba leading innovation.

  Any ideas that I can do or is the motherboard tired?
  I m assuming that the guarantee is by the original window as the hard drive is not in my possession, as the original owner he went out as he had his private data on it. Toshiba will fix this for me?

  I want only to make this Toshiba screen... but no joy...

  Hi Billy,

  In the BIOS you also enabled "Secure Boot" under "Security" options in the BIOS, WIndows 8.1 requires for it to be activated.

  Also your warranty depends on if the disc is "User Accesible" - did you to remove the bottom cover together to change the HARD drive or just remove a door? If you had only to remove a door you will not have cancelled your warranty because it is a part of the user accessible, if the HARD drive is the cause of the problem that you will be charged for the repair, if the motherboard is the cause that you shouldn't pay.

  Hope this helps,
  Z

• cannot get past error - could not connect the user profile service

  My HP desktop computer has windows 7 - I can't get past - error message "user profile service failed to connect ' & 'impossible to load the user profile'!"  By clicking on the ICON that displays windows closes and repeats the error message read... a new user account must be defined the user upwards and copy the previous settings account - but I can't get there.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• After update my IPod touch to IOS 9.2.1 I have a screen that says music but can't seem to my playlists. What is the secret to get past this screen and into my playlists?

  I have a screen which indicates the music with an image very dark of a girl, listening to music, but I can't go past this screen to my playlists. This just started happening in the last two days. Any suggestions?

  It's actually an IPod touch 5th generation not 4th as watch on my question. Thanks for any help that anyone can give.

• deleted recycle bin icon and cannot get back on screen, any suggested apprec

  deleated recyclebin icon accidentally, cannot have return on screen. any sugg apprec.

  If you are using XP or Vista, please visit: http://support.microsoft.com/kb/810869 or http://www.winhelponline.com/articles/141/1/How-to-restore-the-Recycle-bin-icon-that-has-been-accidentally-deleted.html.

  If you use Vista or W7, please visit: http://www.howtogeek.com/howto/windows-vista/restore-missing-desktop-icons-in-windows-vista/.

  Good luck!

  Kosh

• Try to install Windows Vista Service pack, but I cannot get past that the terms of the license pop-up ads.

  Install service pack for my Vista program,

  ... can not get past the license terms box pop... Help!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/947366

  Also check out this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  It will be useful.

• form f8 restore system with other users, request user name and password cannot get past it

  help aaarrrgghhhhhh!

  The name and password of Windows re is looking for an administrator on the computer. Then, you must Access the recovery options and have no problem there.

  PS Azam, he tries to restore the system, the F8 boot screen where you choose computer repair, and it is stuck on the screen where it asks for credentials. Or at least that's what I interpret from his post, I could be wrong.

• q159na flag 23: new all-in-one cannot get past Hello it screen

  Hello
  Just bought new hp all-in-one... and can spend the morning he screen
  The mouse is on and the Receiver USB has been inserted in the mouse but does not work and the keyboard doesn't seem to be alive either. .. checked batteries in keyboard etc.
  Can anyone help?
  Thank you!

  philipcrabtree

  Hello;
  
  Let me welcome you on the HP forums!
  
  Since it is a relatively new machine, instead of hurt for hours to fix yourself, why not just let HP repair at our expense!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Installation of POS, cannot get past the initial Setup screen.

  I have configured the DNS and tested resolution, all the names and the IP addresses of resolve. Stars of /etc/resolv.conf and I still get the same error. Anyone know of a solution for this?

  Turns to me, the problem is with the host name. Just put in POS instead of vdp.steelnework.com. In the field of domain in your domain. You can check out this video VMware vSphere 5.1 - install and configure - YouTube Data Protection

• I did an upgrade and now can't get past login screen

  I did an update of my Macbook Pro, non-unibody, running 10.8. ? by using the software update page.  It seemed it wasn't minor corrections to the drivers, but the Mavericks jump or what.

  Everything seems to work well and he did it again to the login screen.  Now it makes a loop on the login screen.  When I enter my login, it seems, it tries to connect but just returns to the login screen and my avatar.  If I enter an incorrect password, it is as it should be and shakes the password box, but when I enter the correct pass it's all gray, then black, then loops back to the login screen and my avatar.

  Help please?

  Bruce

  It would be useful that you have indicated the EXACT model/year of yoyr MBP.

  Reset the SMC and the NVRAM:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  Any change?

  Ciao.

• Load Vista updates and now cannot get past update

  I installed the updates last night for a new cell phone (within a week).  I stopped him to install and it is restarted it will not move past the swirling circle and the Configuration Status: 3/3 (the completion percentage will increase from 0 to 99 100) then it stops.  He continues again and again this cycle.

  I tried the boot options, esc, Ctrl alt del, I stop pressing the button, I tried to start in safe mode, and I put the Vista backup CD in.  Nothing works, it goes just by the same process.

  Some suggestions here, like the restoration of the system
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358 TaurArian [MVP] 2005-2010 - Update Services

• Aspire 5742 will not get past Windows screen

  I have an Acer Aspire 5742 w/Windows last week. He has worked for several days, but nto starts today; It's not beyond the screen of Windows (with Space Needle).  Different keys tab and c + a + del does a dark blue screen and tells me to "Please wait".  The drop-down menu near the top of the page ot the needle on the screen has the same effect.  (Mouse works fine)

  How can I get the laptop to go to work?  I am currently using my old computer for this message.

  What happens when you press on & hold the power button until it stops, then press again to start system cold?

  Jack E/NJ

• Sony A57 will not get past the screen saying written on the memory card has not been completed correctly

  He put in service, took a couple of pictures, he started acting funny then it poped a message written on the memory card was not completed correctly, if you press on enter it goes to the next screen. Press ENTER again it goes back to the first screen. Someone has an idea

  Thank you, a new memory card sets, I was worried cause I couldn't get to the menu screen. If other people have this happen, say that you can't in front of screens to reformat, a new sd card should do the trick