Cannot get rid of the Mac Cleaner program

Similar Questions

• Cannot get rid of the BIOS password

  Bought an ACER Aspire E1 from an EBAY of ACER store about a year ago. A few weeks ago, I started it and quickly received a BIOS PASSWORD entry. Since that time, the laptop was absolutely worthless. I guess I tried the hardware, software, battery and all I could think of to fix the problem. I tried the MICROSOFT forums. ACER, ASK.COM Forums and forums Forums, forums, forrums and other forums that I could think of to try to resolve the unknown BIOS password. Thanks UEFI.

  I guess short of replacement of the EEPROM on the motherboard (don't think even that would help) which I'd be suspicious to do.

  Cannot get rid of the BIOS password.

  If I contact the ACER Support, they say that it's a hardware problem. I tried (as suggested by ACER support), bringing to STAPLES, BESTBUY, FRYS ELECTRONICS, OFFICE MAX, DATA DOCTORS, and several other 'Repair computer facilities' nothing works.

  IN a WORD, it's a PIECE OF a $400 trash...

  If anyone has any ideas on how to reslove this issue, send me an E-mail, fax, text. or post a reply...

  Thanks for letting me the WIND...

  WMARSH...

  can you post the exact model E1?

  E1 - xxx

• How can I get rid of the real Antivirus program

  How can I get rid of the Real Antivirus program? Sorry, and his poppings had driven crazy me, me preventing system problems and there...

  Follow this

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• CANNOT GET RID OF THE ARROW ON THE LINE OF MYT TOOL.  CANNOT CHANGE THE COLOR OF THE STROKE.  Help

  CANNOT GET RID OF THE ARROW ON THE LINE OF MYT TOOL.  CANNOT CHANGE THE COLOR OF THE STROKE.  Help

  

• Cannot get rid of the empty Capture window

  I've been video capture from VHS tapes to a VCR by a Canopus ADVC-55 analog-to-digital converter.  I use Windows 7.  It worked OK, but at one point, first Elements 9 froze when taking and I aborted it via Task Manager.  When I reopened it PE9 a capture window empty blocking work area appeared (see Figure).  The window cannot be closed or moved, but can be resized.

  I have made several attempts to get rid of him.

  -J' started another video capture, which opened a new capture window without getting rid of it empty.

  -Starting a new project doesn't have a window.

  -J' uninstalled and reinstalled PE9.  The empty window always opens when I start the program!

  The program is still usable by resizing the window to small so large that I can access the controls, but I would appreciate any advice to get rid of the stupid thing.

  

  Welcome to the forum.

  It's a new one on me.

  First thing I would do would be go to the fenΩtre > reset the workspace and we hope that it clears.

  Hope that helps and good luck,

  Hunt

• Smartphones from blackBerry Desktop Manager "disconnected" and I cannot get rid of the error message

  I just bought a Blackberry Curve 8530, running v5 software, my computer is Windows 7. I installed the 501_b073_multilanguage software that I downloaded from the site Web of Blackberry. When I run the Desktop Manager I get this message: "Before you start, check that your current BlackBerry device is connected to your computer." Troubleshooting functions I've seen on this forum: many tips (ones I've tried is below). One in particular, that I can't do is "Office Manager shows"off". ".
  -Make sure that the user has entered in the Desktop Manager and select options > connection settings > detect. »

  ... because I can't get rid of the error message dialoge box, and I can't click on the menu options in the BB Desktop Manager.

  I tried the following:

  • uninstalled and reinstalled twice - 2nd uninstall was a "hard" uninstall where I deleted the registry files by hand
  • installs the cable to the USB port at the back (after having tried both ports at the front) of the computer
  • rebooted the computer several times
  • hard starts the phone by removing the battery
  • plugged in, removed and replugged in the phone.

  Also:

  • The phone is properly install when I plug it in, but the software still does not seem to see it.
  • In Device Manager, the BlackBerry appears under portable devices. Double clicking on it gives me the message "this device is working properly." of reassurring.
  • The Com1 port is working properly, according to Device Manager.
  • A double-click on the icon of the Device Manager to get the properties indicates that the Com1 port is "disconnected" - when I try to set it up, it appears just back to the disconnected state.

  If someone has an idea or something that I have not tried, I'd be happy of course!

  Thank you!

  K

  

  

  Good, people, after a phone call from 3 1/2 hour with a (very patient) phone support person to Blackberry, here's what I learned.

  You can check your drivers USB in this way:

  1. Plug your phone into your USB key. Assuming that your Blackberry is "seen" by your computer...
  2. Go into the Device Manager on your computer (Panel)
  3. Expand the Universal Serial Bus controllers at the bottom of the list item
  4. Right-click on the BlackBerry smartphone, and then select Properties
  5. Click on the driver tab
  6. Click the driver Details button
  7. You should see a driver. I saw two. The one like the BlackBerry is the RimUsb one.

  So here's what NOT to do: we threw any driver who has been the "extra". This actually made using my mouse and keyboard cannot, because they are USB and my poor husband has sent in the basement to find a million-year-old keyboard (and mouse) with the old fashioned type of connectors (PS2). Bleh. Don't, don't.

  Here's what I did that worked (not saything this will work for you - it changes the registry to a backup system with this backup and restore if you are nervous about this kind of thing):

  1. On the start menu, choose run and type regedit into the registry editor.
  2. Follow this path to the file: HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, computer, class
  3. Click: {36FCE60-C465-11CF-8056-4445535400000}
  4. If there is an article called law "UpperFilters", delete it. (See photos)

  Hope this helps someone.

  Karin

  First photo: Watch 'before '.

  

  Second picture: displays the full path of the file and 'after '.

  

• Classroom in a book - CS4 - Lesson 6 - cannot get rid of the noise

  I'm on Lesson 6 version CS4 classroom in a book. I worked on the image with the mother and child, but I can't seem to get rid of the noise in the mountains and the sky. They look very grainy. I've followed all the steps exactly and even went through screen shots to see if any setting have been changed which may not have been mentioned. I compared my version to the version 'End' and they seem very different. The mountains and the look of the sky much better in the "End" version, although the mother and child look more exposed. On mine, the people look much more sharp, but the noise in the mountains is terrible and the sky is also quite grainy.  I redid this part of the lesson about 6 times, four times on my PC and twice on a MAC, but the results are always the same.  The sharpness which lesson you do at the end, while improving certain parts, the granulation in the worst of the sky and the mountains.

  This has been very frustrating.  Clearly something more was done with the image of 'End', which was not in the lesson.  Even if people, in my opinion, look better in my finished version, the mountains and the sky look terrible, and the background was the entire point of the lesson. Does anyone have ideas, what has been done to make the smooth background to the image of 'end '?

  I dug my copy of PS CS4 classroom in a book and went through the same lesson to see what results I got.  I can confirm that the noise reduction is not optimal.  See the example in the picture 'after ':

  

  Compare with the results of a 3rd party plugin noise reduction (in this case Topaz Denoise) using a standard preset:

  

  This version needs a bit of sharpening is to the people.

  In doing this exercise that I was reminded why I dislike the Classroom in a Book series.  It makes you go through the steps like a zombie, tell you what value to enter in each field, but it does not often do the fields. Certainly, as a reader, you are free to experiment, but which do not encourage lessons. And the fact that the results do not always match the book and readers are disappointed when the results do not confirm my opinion that the book is not encourage experimentation.  Perhaps a further reduction of noise was made for each channel in the Advanced setting of section.as described in the box of Lesson 6.

• When I try to log on to hotmail, I get a message to update my browser, which I did, but cannot get rid of the message.

  I would like to know how to get rid of the message telling me to put my browser every time I try to log on to outlook. I've improved.

  Please read the sites say that Firefox is obsolete or incompatible, even if it's the latest version

  So read Firefox updated to the latest version to ensure that you're on Firefox 28.0

• box says "Do you use Yahoo toolbar on multiple computers" cannot get rid of the box. Do not accept the entry or nearby!

  The box has two buttons. They say 'save on my Yahoo! ID' the other said no thank you, "just save on this computer." I can press each button, but nothing seems to happen. The only way to get rid of the box is to close firefox. I use a HP s5713w-b and windows-7.
  I downloaded firefox with improvements to Yahoo.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)

• Cannot get rid of the horse of Troy BACK/Alureon.AB

  Try to find a way to get rid of the TrojanDOS/Alureon.AB AB version. Help someone?

  Suggest you run TDSS Killer http://www.bleepingcomputer.com/virus-removal/remove-tdss-tdl3-alureon-rootkit-using-tdsskiller

  And remember that you read this document carefully, including the stages of recovery which are discussed at the conclusion of the narrative

  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Trojan%3ADOS%2FAlureon.A

  Further details including the GreginMich response can be found in this thread: http://answers.microsoft.com/en-us/protect/forum/defender_offline-protect_scanning/unable-to-run-windows-defender-offline-after-found/e0b638c6-3ae3-421e-9a59-ad64028196aa

• Cannot get rid of the black

  http://dealeradbrowser.com/newsletters/august2013.html

  I can't get rid of the black under the guy.

  I can't find it in the code. No borders. No fill.

  Any suggestions?

  Thank you.

  OK, change the code to look like this:

  style = "" display: block; " " SRC ="http://dealeradbrowser.com/images/salesman3.png" width = "255" height = "342" border = "0" alt ="" / > "

  Look at the "BOLD" text that needs to be added and it should work.

  Good luck.

• cannot get rid of the archivelog in catalog

  Hello
  
  I take a backup to standby:
  
  Run {}
  allocate channel t1 type disk;
  SQL 'alter system archive log current';
  BACKUP DATABASE
  format of filesperset 30 ' / oracle/RMAN/backups/LZ1/backups/DISK_HOT_%d_%s.%p'
  INCLUDE THE CURRENT STANDBY CONTROLFILE
  MORE ARCHIVELOG;
  SQL 'alter system archive log current';
  change archivelog than any overlap;
  ARCHIVELOG backup all the format ' / oracle/RMAN/backups/LZ1/backups/DISK_ARC_%d_%s.%p';
  current backup controlfile as ' / oracle/RMAN/backups/LZ1/backups/DISK_CTL_%d_%s.%p';
  backup spfile format ' / oracle/RMAN/backups/LZ1/backups/DISK_SPFILE_%d_%s.%p';
  output channel t1;
  }
  
  
  
  And I get the error:
  
  RMAN-06059: journal archived expected not found, lost of archived newspaper compromised recoverability
  ORA-19625: error identification of file /oracle/database/backup/LZ1/archives/LZ1_t1_s16305_r709841244.arc
  
  This archive is one of 2 days.
  
  In the catalog, I tried the following commands:
  
  
  OVERLAP ARCHIVELOG ALL;
  and even:
  
  DELETE NOPROMPT EXPIRED ARCHIVELOG ALL;
  
  
  But I can't get rid of the error.
  
  Do you have an idea?
  
  Kind regards
  
  Nico

  Use,
  RMAN > changing archivelog any overlap;

  http://www.shutdownabort.com/errors/RMAN-06059.php

  Thank you

• Always convert Win app - cannot get rid of the controls of the projector window full-screen Mac?

  OK, two steps back. I use mx 2004 on windows to create a projector full screen for Mac. In windows, the window controls go away and the app looks like an application full screen. However, the Mac projector shows windows controls high on my 640 x 480 video - IE red, orange and green buttons at the top left.  I looked through all the parameters of publication, and I don't see anything that could be the cause.  Can someone tell me please how to get rid of these controls windows in Mac version, so I can have a clean fullscreen application to watch without control of windows?  I would be very grateful thank you!

  Prof. S.

  Do that there's no sprites on the selected scene, and then in the property inspector, and you should see a tab labeled, "View model". Click this tab and there uncheck the 'Visible' in the title bar of paragraph Options.

  I do not work on a mac, so I can't confirm that this works for mac, but if you haven't tried yet so maybe that will do the trick.

• Impossible to get rid of the W7 - ZIP program.

  Original title: program W7 - ZIP

  W7 - Zip followed with another program, I downloaded. I run Win XP. When I uninstalled with him included the program, he made the most of my dead shortcuts. I could not restart without removing power. I used safe MODE to restore. Restoration also restores the W7 - ZIP. I did 3 times. I need HELP.

  bruk251

  Hello

  Perform the following methods and check:

  Method 1: Clean boot the computer, and control.

  See the following article to put the computer in a clean boot state:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if it helps.