Cannot get SMTP to work, please help.

Hello

I recently bought the camera WVC80N.

The main reason I bought it was to receive alerts of request sent to me.

I have tried all the different combinations for a week and still no TEST EMAIL failed.

Here are my specs:

ISP: Verizon FiOS

I have a setup of router D-link N as an access point that connects to my FiOS router/modem.

The camera connected to the wireless D-Link router.

I tried my ISP's SMTP settings,

I have Verizon email through Yahoo!, so I also tried these parameters.

I made an GMX account and tried, without success.

Can someone please give me an idea on how to get this working?

Thank you!

Port 25 is currently being sent to the IP address of my camera.

Here's how I have my smtp on the camera settings:

TO:[email protected]

From:[email protected]

SMTP server: outgoing.yahoo.verizon.net (I also tried outgoing.verizon.net)

Port: 587 (also tried 25)

My server requires authentication: checked

Username [email protected]

password: *.

The connection information, I checked Windows live client of e-mail at work.

Tags: Linksys Products

Similar Questions

  • Still do not get NAT to work, please help!

    Hi all

    I'm distraught after trying a large number of configuration settings in order to be NAT'ing on VMWare server (2) to operate.

    I have a host and a guest (VM) running Ubuntu Linux.

    I want to be able to reach my guestVM from the outside world by using the IP address of my physical machine, port X. A service is listening on this virtual machine, on the port Y.

    What I currently have is the following:

    Iptables on physical host (a few large lines of it):

    echo 1 & gt; / proc/sys/net/ipv4/ip_forward

    iptables Pei FALLING forward

    iptables - A PREROUTING nat t-i eth0 Pei tcp - dport X-j DNAT - destination 192.168.6.3:X

    iptables-a FORWARD eth0 o vmnet8 Pei tcp - dport X-j ACCEPT-i

    A few large lines of /etc/vmware/vmnet8/nat/nat.conf:

    & lt; host & gt;

    IP = 192.168.6.2

    subnet mask = 255.255.255.0

    & lt; incomingtcp & gt;

    X = 192.168.6.3:Y

    The guest's IP 192.168.6.3

    I restarted VMware (/etc/init.d/vmware restart) for the configuration to take effect.

    Because I so read in a message, I activated the redirection ipv4 on the guest (but also tried without redirection enabled on the host).

    From the reviews, I did not any configuration of iptables so far (so default settings apply).

    I can see that packets are not have filtered in my iptables on the host, because at the end of the config script, I make sure that everything I have not configured to let pass will be saved before he fell.

    In addition, it is important to note that with this configuration, redirect works correctly when I try to use the service on the guest VM, initiated from the host.

    When I try to connect to the service of the VM guest from outside, I can not connect. Packets only to the service.

    Can we see one any error in my thinking/configuration?

    As I said, I'm quite distraught after all my attempts so far.

    Best regards

    Tim

    Welcome to the forums!

    Do not use and the iptables rules for the transmission of packets to the guest. It is matter of VMware.

    Temporarily disable all firewall rules (iptbles - F) and test if it works. If it works just use your normal rules to protect the physical network of tzhe port. If necessary, create a rule that allows the port X enter the host.

    AWo

    VCP 3 & 4

    \[:o]===\[o:]

    = You want to have this ad as a ringtone on your mobile phone? =

    = Send 'Assignment' to 911 for only $999999,99! =

  • A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

    A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

    Means generally that you're trying to work on a layer locked.

  • My 10 photoshop element stop working, I'm not able to open it more.  ?  I posted this question a few days ago and I did not get all yer anwer, please help

    My 10 photoshop element stop working, I'm not able to open it more.  ?  I posted this question a few days ago and I did not get all yer anwer, please help

    I have photoshop editor item 10 and organizer first and I have a Macbook pro 10,9,9

    When I try to open an image with the Publisher of the item or if I try to open the PS Editor directly I see this

    file:///users/main/desktop/screen%20Shot%202014-11-26%20at%201.17.35%20PM.PNG

    When I click on edit it does not open and I have this window

    file:///users/main/desktop/screen%20Shot%202014-11-26%20at%201.21.07%20PM.PNG

    and if I click on REOPEN, I still got the same message

    Lucie

  • Satellite L300 - 22 X - cannot get Bluetooth to work

    I got the L300 22 x last week, it says on the box and told me at the time, it comes with bluetooth, but I can't make it work please help!

    on the front of the laptop, there is a wireless switch, which I turned on it lights like orange, but my phone does not find it and when I go into the control panel to try locat any info on the bluetooth is not here to select. I'm starting to wonder if it is installed or not, but why he would say it has bluetooth on the box, if it is not. If anyone knows the answer please help. model nu PSLB8E-0PS007EN.

    Thank you

    Joanna

    Hello

    You will never get Bluetooth works on Satellite L300 - 22 X because it s not equipped with Bluetooth. I put t know who told you this information, but it s wrong.
    A friend told Satellite L300 it s not equipped with Bluetooth too.

    But it uses an external USB Bluetooth dongle which bought in a store of the computer. It wasn't expensive t, but he can use Bluetooth! :)

    Perhaps this is an option for you

  • My Apple ID was I trying to change the password, but is still without work please help me

    MY Apple ID has been disabled... I try to change my password but still does not work please help

    Have you changed the password successfully?

    If you did then you connect and back to wherever you use the account: what to do when you have changed your Apple ID email address or password - Apple support ?

  • my audio does not work please help

    my audio does not work please help. Thank you!

    Hi no thanks,

    1. What is the brand and model of your system and sound card?

    2. when the problem started?

    3. did you of recent changes to the computer?

    You can try to run the sound troubleshooter and see if it helps.

    No sound in Windows

    For more information, you can also consult the following article:

    Tips for solving common audio problems

    Hope this information is useful.

  • I get an error cood1197 please help me solve this problem

    I get an error cood1197 please help me to solve this problem, help please.

    Hello

    1. when, exactly, you receive this error message?

    2 do you have problems with Windows Media Player?

    If you receive this error when you use Windows Media Player, refer to the methods described in the article mentioned below and check.

    Windows Media Player C00D1197 error:

    http://Windows.Microsoft.com/en-us/Windows7/C00D1197

    I hope this helps!

  • Hi my audio - pc does not work please help me

    Hi my audio - pc does not work please help me

    Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

    Resources:

    If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

    Open the troubleshooting of Audio playback

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    In Windows 7

    Click Start > Control Panel

    Click on hardware and sound

    Under sound, click on manage audio devices

    Under playback (tab)

    Choose speakers you have in your output device

    Click Properties >

    Click levels (tab)

    check if the value is 100% >

    GoTo Enhancments > select Loudness balancing

    Apply and OK

    Should be much stronger now...

    For enhancment bit,.

    and if you have HD realtek soundmanager (R2.37) in your control panel

    Try a classic Equalizer setting

  • HP G42-415dx: I tried may on the codes on here to bypass the power on password... none worked please help

    I have a HP G42415dx... Nothing works I think that its Windows 7. / I have tried may on the codes here to bypass the power on password... none worked please help ERROR 61376827

    Thank you very much!

  • I uninstalled Acrobat Reader DC for permanently froze running on Windows 8.1. I downloaded the older version (Acrobat Reader XI), but now require a serial number to install it. Where can I get this number? Please help

    I uninstalled Acrobat Reader DC for permanently froze running on Windows 8.1. I downloaded the older version (Acrobat Reader XI), but now require a serial number to install it. Where can I get this number? Please help

    Hello

    What exactly are you installing?

    Reader is a free software from Adobe and doesn't require any software license serial number.

    It seems that you download Acrobat.

    There is not Acrobat Reader XI.

    He ' Acrobat or Reader XI XI.

    Please visit the following link to install the XI player.

    Concerning

    Sukrit diallo

  • new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

    new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

    Looks like you have somehow the mac version.

    Download the updated windows 6.7 camera raw from this link:

    Adobe - Photoshop: for Windows: Camera Raw 6.7 update

  • Windows 7. The left panel of the start menu icons cannot be removed and arrows don't work - please help!

    The left panel of the start menu icons cannot be removed (when I press "remove from this list" nothing happens) and arrows (see illustration) do not work, that nothing is displayed - please help!

    Try https://support2.microsoft.com/mats/system_maintenance_for_windows/

    If this doesn't help not try to reset the start menu by default:

    1. Right-click on the Start button and click on properties.

    2. Click the Start Menu tab, and then click Customize.

    3. In the Customize Start Menu dialog box, click on use settings by default, click OK, and then click OK again.

  • Cannot get bluetooth to work on my Qosmio F10

    Hi, I have a Qosmio F10 but can't seem to use the bluetooth devices. When I went in the bluetooth devices Manager and tried to add a new device, said bluetooth was off and then I went in an another bluetooth application and who says it could not load the bluetooth startup file (although when I checked, it was on the computer).

    Stupidly, I then installed something called Bluetooth Monitor 2 but this actually took away all bluetooth files and I could not find the bluetooth manager plus. I uninstalled this Bluetooth Monitor 2 but still can't find the old files.

    I was wondering if someone could help? I realize it's a guy very newbie Q but I hardly ever use my laptop and can get the bluetooth works fine on my desktop.
    Any help would be greatly appreciated.
    Thank you

    Hello

    I do not know what F10 you have exactly, but as far as I know that some of them are without Bluetooth. Each unit with BT has a Bluetooth key in the lower corner.

    Also check this please page http://aps.toshiba-tro.de/bluetooth/.

    Good bye

  • "The service cannot logon user profile Service" - Please Help

    Hello

    First of all, I'm not very computer so when things like this happen it kind of scares me.

    When I stopped my laptop last night Windows said it would install updates.  When I turned on this morning my profile (the only one on the machine) opens, but a couple of windows programs said they couldn't find the path and would not work (like the sidebar).  This is not the first time that this has happened so I restarted the computer so that they would work next time.

    I put my passwrod in the profile login page and a message stating "the service user profile service does not logon, the user cannot load profile.

    I turned on the computer and a couple of times, but I still can't access.

    Can someone please help?

    I have an Acer Epower restoration on my external hard drive (to save hard disk space).  I can use it and is anyone know how?

    Help, please.

    Kind regards

    AstoriaBoro

    Hello

    You can try the system restore of Mode without failure, recovery, or a Windows disc.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Have no knowledge of these tools Acer - maybe they are available and help - remember
    I don't know what they will do.

    ========================

    Other wise its back for the links above and a step at a time.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for