Cannot get the password or re-establish the link. What should I do?

Similar Questions

• my wifi on my laptop is disabled cannot get the internet what do I do?

  wifi access that my laptop says that it is disabled how to cancel so that I can get internet access impossible may not not connect to hotspots or get wifi

  Hello

  1. What is the brand and model of the laptop?

  2. what happens when you connect to the internet via cable or wired connection?

  3A this works much earlier? Did you change to the laptop before the show?

  You can try the steps from the following link and check if it works:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• I have a photo in the udf format cd and vista cannot see the files, what should I do?

  Hello

  I have my photos of holiday saved on a cd, the cd was made by a friend. The cd is udf format. Vista can see the folder. and who sees using 500 MB and can see the remaining space. But he can't see any files. Any help please. I really want to see these pictures, it was a very memorable time.
  Thank you.

  Hello

  I have my photos of holiday saved on a cd, the cd was made by a friend. The cd is udf format. Vista can see the folder. and who sees using 500 MB and can see the remaining space. But he can't see any files. Any help please. I really want to see these pictures, it was a very memorable time.

  Thank you.

  =================================
  I'm not positive that the following UDF readers work
  on Vista... but they may be worth a try...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free... Volume UDF - 7.1.0.95 player
  http://www.Roxio.com/enu/support/UDF/software_updates.html

  Free... Adaptec UDF Reader Driver 5.1.1.213
  http://download.CNET.com/Adaptec-UDF-reader-driver/3000-2100_4-9497911.html
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• trying to put in place the 2nd user account and cannot get a password

  you have a user account, but cannot get a password

  Hi MaryFotta,

  It seems that you cannot create a password for the second user account.

  I will definitely help you with this.

  1. what version of Windows is installed on the computer?

  2 user are. What account you referring?

  For more information, visit the following links and check.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  User accounts: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/user-accounts-frequently-asked-questions

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Apple TV 4th generation-cannot get the Facetime in fashion landscape on my Samung TV

  Apple TV 4th gen TV OS 9.1

  When I do Facetime since my phone / Ipad and started airplay on my Samsung TV I cannot get the Facetime in landscape mode or mode full screen when I Flip horizontally Facetime.

  Only it shows vertical - left and right of the screen I see black spots. Is this a bug in the software?

  If you do not enable airplay after that you started to facetime and it runs in landscape mode?

• Cannot get the file to be imported.

  I tried the method of JoseIbarra - I did as suggested but cannot get the file to be imported in the services file. He never asked me if I wanted to add the information in the registry, so it is still on the office. Don't know what to do from here.

  Please stick to the initial conversation.

  Is this you speak of course (*first conversation*):
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/how-do-i-get-print-spooler-back-into-my-Windows-XP/ed014329-1bd3-458d-9C93-bbb306fc731f

  You also made this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/print-spooler/c4610093-a96f-4476-B263-eecf5b8fc339

  (but please do not reply to this one...)

  And this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/continuation-of-print-spooler-problem/0e885d7b-3e64-42ee-A248-9d9f2a8e26c5

  (Even once - keep the * first conversation * going.)  Written on it.  Show how this conversation continues spreading around.)

  BTW - my suggestion has not changed.  I still think that you get just around issues that still exist, probably, by fixing the little things you need at a given time.

  Backup important files/folders (for you) (including documents, photos, music, Favorites, Internet favorites, files installable application, serial numbers, product keys, spreadsheets, you saved to the desktop email, etc.) and wipe the disc completely - I'd even a zero writing on the disc (formatting) before installing the operating system from the original installation media.  Then install your applications and restore your files.

  As to what they were asked to do... Always seems that you saved the file as a *. TXT file and not a *. REG or there is much more wrong with your machine (see my suggestion above.)

  Visit this web page to look at the photo on the left (a first) to see the screenshot of the possible is the desktop icons and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

  To check if you saved incorrectly or if there is something wrong with your system (or two) - right click on the file you saved and choose 'Properties' from the menu you get.  Under the 'Général' tab, she said, "file Type: registration entries (.reg)" and "opens with: Registry Editor" or something similar?  Visit this web page to look at the picture on the right (second) to see the screenshot of the possible look at the windows of the property and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

• cannot get the keyboard to select windows xp when I have only four seconds to select is stuck on windows xp professional and cannot get the keyboard to use arrows to select

  cannot get the keyboard works when reebooting said cd I need driver sata when reebooting he gives four seconds to schrol up to windows xp but the line is highlighted on a windows xp profesional bellows and can't seem to choose windows xp on its own keyboard wont respond but lights from F1 or f2 f3 until f12 choose please help

  A few old machines will not recognize a USB keyboard/mouse until after Windows starts.  Look at the back of your computer and see if you have a PS/2 (round) connector for a keyboard and a mouse.  If you do, then you will need to use a keyboard with a round PS/2 connector or a USB-to-PS/2 adapter and plug the PS/2 connector on the back of your computer so that it recognizes the keyboard until Windows starts on your keyboard.

  The SATA driver applies to your hard drive.  A CD of start-up/installation of Windows XP does not recognize a SATA hard drive.  If you install Windows, you will need to hit F6 at the right time and insert a floppy with the SATA driver on this subject.

  HTH,
  JW

• print module cannot get the printer device context

  I can't get my printer to work. It seems that the computer does not recognize the printer when I plug. No printer symbol. then, when I try to print a square stands up and says 'printing module cannot get printer device context' I have no idea what this means or what to do about this please help

  You need to get the print vendor drivers.   You can try using a printer driver that converts data of the PDL even that interprets your device, but you should request this information from the company that made the device

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail.

  I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?

  [moved]

  I had the same problem 2 weeks while in the Mexico.  I contacted the support TWC and the person to whom I spoke said he had to unlock something.  When he did, all my mail came in Outlook in the spam folder.  It was OK because I got my mail.

  I moved to a different House and now have the same problem again.  I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage.  He has not found anything by the previous call that guided him by setting this time.  He said that he would open a ticket and call me in the next 24 to 48 hours.

  Is it reminds and solves the problem, I'll post how it was corrected.

  Amigos audio!

• ERROR: Cannot get the size of the logical block for spfile

  Ran across the following error in the log of alerts for a the 2 node RAC database:

  ERROR: Cannot get the size of the logical block for spfile "+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora".

  Looked in MOS and found nothing.  Has anyone go through this before?  If so, what is the cause?

  Just received a resolution of Support from Oracle.  They said that this is a benign error and can be ignored.  Here is their answer to my SR:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  OK, after reviewing all that there seems to be no problem to fix. All configurations are correct. We believe that these errors are benign and can be ignored.

  COMMENTS

  ===============

  -L' ASM instance is online.

  -The Diskgroup: + XXXXXX_SYSTEM is mounted and has the physical and logical of 512 bytes sector size.

  -No error message in the alerts ASM journal.

  In light of the facts above, the message "ERROR: could not get the size of the logical block for spfile" seems benign and can be ignored.

  However, to avoid these messages, as a workaround, you can try creating the spfile pfile '+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora' and then try to create spfile diskgroup + XXXXXX_SYSTEM using this file pfile.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

• Will set up the HP Photosmart 7510 new iMac OSX 10.7.3; Cannot get the home screen appears.

  Instead of the home screen, I get an error message ' no connection: your printer is not connected to a network. " If please connect to a network and try again. "I downloaded the software and latest drivers; my iMac recognizes the new HP printer.  But I must still be able to get the home screen to display on the printer so that I can do the basic settings.  I did the simple troubleshooting suggestions (for example, for printer disconnected from the socket wall and then plugged in;) I restarted the iMac; I uninstalled the software and drivers and reinstalled)... but no change, cannot get the home screen appears.

  The printer turned on, unplug the power to the back of the printer (not the wall) for 30 seconds.

  If this does not work, it seems that your printer is maybe defective.  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• Cannot get the "< FEFF >" string in the selected text [indesign CS6]

  Hello world!

  I can't get the string to the selected text. The selected text contains several xml tags.

  In adobe indesign cc version of 2014, the selected text is bring the string «< FEFF >» tags

  In indesign adobe cs6 version cannot get the string "< FEFF >. they do ""-empty space.

  

  Are the above-selected text contains several xml tags.

  but I get content using script code can't get the string.

  

  the script gives the result, xml tags are converted to "". ""  I expect "< FEFF >.

  I expect the output is: "< FEFF > Applescript < FEFF > < FEFF > selected text < FEFF > < FEFF > < FEFF >."

  Please help me...

  Thank you

  John Peter.

  the script gives the result, xml tags are converted to "". ""  I expect to ''.

  The xml tags are not converted to "" but "\uFEFF" (zero-width space non-bec), it is the character used to represent the tags in a text frame. Looks like the apple script converts a hexadecimal representation unicode values.

• MuseJSAssert:Error calls the function selection: TypeError: cannot get the "init" reference to undefined property or no, I am a beginner and not able to solve this problem with my website, please help...

  Everytime I open my site I get this error "MuseJSAssert: Errot calling function selection: TypeError: cannot get the"init"reference to undefined property or null" and I was a newbie am not able to solve this problem.

  

  I did take all measures please help.

  Hello

  Can try you it on another browser that the problem does not come up on top of our end.?

  Kind regards

  Akshay