Cannot get the sound to work on my hp mini computer

Similar Questions

• I recently reinstalled windows xp on my dads pc, and I can't get the sound to work

  IM hard to get the sound to work on my dads pc. I reinstalled windows xp after a virus wiped out, and when I go to the Device Manager, all audio drivers are listed. They all work correctly according to the Manager of devices, but under "other devices", there are several things that are listed with icons of yellow question mark next to them. IM wondering if maybe the problem with these "other devices", rather than the sound itself.

  try to update the drivers on the yellow icons, double-click on the "peripheral" and discover the status of driver.

• HP ENVY Phoenix 810-160: I can't get the sound to work

  I just got the

  HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work.  I use it with a HP Envy 23 inch monitor which also has audio Beats and a HDMI cable connection.  I went through all the steps on the support page of the monitor and desktop support page.  Any help out there?  Thanks in advance.

  Hello

  No, it's going to work, you can not connect computer Office AiO 23 and get a sound of the AiO 23.

  Kind regards.

• Cannot get the sound to play when the pre-recorded videos on Webex access

  Original title: audio playback

  I have a HP Pavilion pc with windows 7. I can't get the sound to play when the pre-recorded videos on Webex access.  I checked all the settings and the sound works well when listening to music or playing games. There is a sound icon above the keyboard that looks like it is not if this could be the problem? If yes how to do it turn on?

  Hi Robin,

  1. it worked before?

  2. are you aware of changes to the computer before the show?

  3. you use WebEx with product Cisco meeting place or alone?

  4. how to access pre-recorded videos on WebEx?

  Because the sound works properly with another application, it seems that you may need to change some settings in WebEx. You can contact WebEx support for assistance:

  https://support.WebEx.com/MyAccountWeb/supporthome.do

  Hope this information helps.

• Cannot get the remote to work

  Hi guys,.

  I've just updated my Visa dv5 Pavilion to Windows 7, I can't now get the remote to work. I think it's a driver problem, Device Manager, says the driver works correctly, but I don't know if the driver is compatible with W7. I don't know where or how to get the appropriate driver.

  Any ideas?

  MORGs says:

  It is a Pavilion dv5 1110em running Windows 7 32 bit.

  Thank you!

  Here is Windows 7 32 - bit ENE CIR receiver driver you need for your remote control.

  Best regards

  ERICO

• Cannot get the unit to work in Windows 7 and Ubuntu 64-bit

  Running Windows 7 Professional 64 - bit Ubuntu 10.04.1 64-bit host as a guest.  After installing and upgrading everything (including VMWare tools) when I try to enter the unit I get the following error:

  The virtual machine cannot be set to Unity mode.  Check that the unit is supported for this guest operating system and the latest version of VMWare Tools is installed.

  This forum works on a Thinkpad T410S with turned on VT.  I also tried with Ubuntu 32-bit and the same problem occurs.  I have attached my vmware.log.  I also closed and restarted the host and the guest.

  Thank you.

  The authorization service is part of the process, although if this

  the service is not performed, a player will say that it is the cause. But to

  check, run "net start vmauthdservice" a high command

  fast and see if that gets the service runs.

  If services

  works OK and the connection is still blocked, so you

  disable, remove, or update any software is blocking.

• Libretto U100 - cannot get the microphone to work

  Hello

  I have a problem with the microphone on laptop and also when using my headset Philips SHM3100 Multimedia bought recently. I tried to use the Windows Sound Recorder software, but my voice is not recognized at all.

  I have a headset Bluetooth Configuration of whose sound and the microphone works perfectly. Someone had the same problem and found a solution?

  Thank you much in advance.
  Kind regards.

  Post edited by: julia1

  Hello

  What a problem? Do you think that it is really a problem or perhaps only a configuration setting bad microphone?
  I think that he just misconfigured s mic settings!

  If you use the external microphone, you should check the settings in the-> sound & audio devices Control Panel.
  In the Volume press tab on the Advanced button and check if the Microphone control is not mute.
  Use the Advanced button and the brand, select options called Mic2 and mic amp.

  Good bye

• Satellite Pro P300-19 q - cannot get the Wlan to work

  Hello

  Ive just bought the PRO P300-19 q and as many other people cannot get wifi to register even less to connect to any network. I will say that I am under XP Pro. I've updated all the drivers and everything is enabled.

  If anyone can help with this problem it would be greatly appreciated. It seems absurd that Toshiba or Intel have not resolved that, as the problem is ongoing since 2005 - announcement earlier I found.

  Thanks for your help, Zato.

  Hello!

  You have successfully updated the WLAN driver on the Toshiba site?
  http://EU.computers.Toshiba-Europe.com

  Try to update the BIOS of your laptop. You will find on the Toshiba site.

  You use the same standard WiFi on your laptop as on the router? Check in the properties.

  Good bye

• Compaq Presario R3000 how to get the sound to work with Windows 7 RC

  (1) download SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe

  (2) execute, create a swsetup c:\ directory

  3) once all files are extracted DO NOT INSTALL

  (4) now Goto the Start Menu click on devices and printers, click the name that you called your machine this will mark will be a yellow triangle as the audio driver windows 7 already installed is a realtek ac 97, which does not.

  (5) once your Machinename, you will see a general tab and then Hardware tab select the Hardware tab.

  (6) seeking the Realtek ac 97 under the functions of the device, select it and click Properties,

  (7) tab now the driver, now click on update driver.

  (8) select Let me pick from a list of device drivers, now click on disk

  9) click Browse, select the following Swsetup\SP29586\SMAXWDM\W2K_XP location and click smwdmCH6.inf

  (10) the Soundmax driver should come now select ok and next year. Now your sound will work

  Go on the side of Support HP and look for drivers for Presario R3000 and download the driver for Audio "SP28552" but do not install it. After you download the driver, search for the driver on the folder file download you too and right-click on it and select properties and then select "Change the setting for all users", once the pop-up window, select Compatibility Mode and select it for Window XP Service Pack 3 all the and click ok. Once you ok it click on the file to put in place and follow the steps.
  
  I did it on my Compaq Presario R3000 which has Window XP and I installed Windows 7 Enterprise 32 bit on it and it awesome except for the Audio that I just decided to work, but I still have problems with the Base system device drivers.
  
  I hope this help you with the problem of noise.

• Satellite L350 - cannot get the keyboard to work with Vista Home Premium

  I just reinstalled Vista Home Premium 32 bit but can not get the keyboard works. I tried to connect an external keyboard with the same results. I checked the disk manager that says that the driver is working OK I wonder if it could be a problem of system or a hardware problem.

  Any help would be welcome

  Jim

  Try the external USB keyboard.
  If it works correctly, then the internal keyboard works bad and must be replaced.

• Conductor 3.0 with 10.5 of the Complutense University of MADRID - cannot get the AdHoc questions work/TLS record

  I'm working on a laboratory configuration to prepare application a client driver 3.0 with 10.5SU1 of the Complutense University of MADRID.  I have the base line everything up, but I can't get the Ad Hoc conference bridge to enroll at the University Complutense of MADRID by the conductor, nor I can SIP trunk to become accessible.  This all points to a TLS problem, which is reflected in the newspapers of the Complutense University of MADRID:

  Pre-verifie SdlSSLTCPListener::verify_cb = 0, cert check errno = 20, depth = 0
  00269848.000 | 22:41:54.023 | AppInfo | HandleSSLError - verification of the certificate has no:(Verification error:20)-Impossible to get the certificate of the local radio station for 10.0.0.113:41409

  This repeats for the Ad Hoc and appointments of the intellectual property on the driver.

  I followed the conductor with the guide of the AAU (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) as well as the deployment of certificate (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) guide.  I have a root certification authority I use (lab.local), I installed the root certificate and the certificates of the host on both devices.  OpenSSL gives me the verification of the return code: 0 (ok), at once UCM and conductor during validation to the root certificate.

  I think that I followed the guides and double-checked against them.  Someone else has seen this? What Miss me?

  Hi Ryan,

  I think that I am running into the same question... The TAC engineer gave you a bug ID I can follow?

  Thank you

  Peter

• Cannot get the backslash to work on the keyboard - HP Pavilion dm3

  Hello

  For some reason, I can't get the backslash key to work on my keyboard. Whenever I try to use a backslash I get the following symbols

  -that if I simply hit they key #.

  -or maybe this if I use shift ~.

  The hash symbol is actually located above the number three on the keyboard, when I get over that I have £

  I am at a loss as to why my keys are everywhere!

  Someone at - he had ideas because it drives me crazy!

  Thank you

  Hello

  This is generally what is the problem. This is the bad loading keyboard mapping. I have the same hassle from time to time between the English) and Dutch languages that are installed in my BONES.

  Try adding American English (International) to the language bar.

  Best regards
  ERICO

• Satellite A210 - 11 p - cannot get the camera to work

  Hey

  I have the Satellite A210 - 11 p and I can't have the camera to work on it.
  It will be yurn on during two seconds and then shut off and 'Preview of No' appears.

  Any help on this would be greatly appreciated.

  Kris

  Hello

  Have you tried you for reinstall or update it? Download camera assistant of [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] delete the previous class, and then restart the laptop. Then install a downloaded

• can not get the printer to work when sending my laptop computer that he used to work the printer is on and functional

  Can't get printer to work when sending my laptop computer that he used to work the printer is on and functional. Canon pixma MP180

  Hi NickManchisi

   

  1. for how long have you been faced with this problem?
  2. what happens when you try to print?
  3. do you receive any error messages?

  Method 1 :
  Please refer to the below mentioned article and check if the given steps help.

  http://support.Microsoft.com/kb/308028

  
  Method 2:

  You can even perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time when you have not experienced the problem.

   

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Refer to the following help link on performing a system restore.
  http://support.Microsoft.com/kb/306084

   

  I hope this helps.

• get the sound to work

  Hey everyone, I'm using the tutorial cowbell as the basis for trying to get sound to play in my application, however, I can't seem to make it work, when I build I get always an error in the 'soft', cpp file it finds not all the ALUT API, I know not what Miss me compared to the tutorial and I know that it is an ambiguous question , so I just hope that someone could this previously met and have a solution.

  If not I will continue to work at home, it takes just a while, thank you!

  Maybe you missed library OpenAL binding step? Check the .pro file.