Cannot get Windows 10

I can't get Windows 10 even start - I get a screen with a circle going round - not very technology of mind, but thought I would get more than that! Please help - Cheers

Try to upgrade manually:

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

then

then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

Tags: Windows

Similar Questions

  • Cannot get windows 7 sp1 to charge through the installation... then says 'Setup sp fail' changes back

    Cannot get windows 7 sp1 to load either with download or install disk... takes a lot of time then configures up to 99% then says 'default configuration restoration of service pack changes' which can do so he can install

    Hello

    Please, try the steps outlined in the article below and check.

    Problems to install a service pack for Windows 7
    http://Windows.Microsoft.com/troubleshootwindows7sp1

    I hope this helps.

  • Cannot get windows 10 app upgrade to run

    Hello

    I have a portable extensible original and active running windows 7 Home premium and I cannot get windows 10 app to run.

    I followed KB https://support.microsoft.com/en-us/kb/3081048, got the identity of the package on the two dism/Online/Get-Packages | Findstr 3035583 2952664 and still nothing. After this I run the troubleshooter of GW10appdiagnostic and it comes always freezes in "eligibility verification."

    In addition, potential interest that I got a windows error update on the module "upgrade to Windows 10".

    I want to get help and upgrade as soon as POSSIBLE.

    Thank you.

    Hello Madzzz

    I suggest to you that do a manual upgrade using the Windows 10 installation media. That way skip you the step of waiting for the book to come through instantly upgrade to Windows 10. A guide step by step can be found here.

    Hope this suggestion helps you Madzzz

    Yuri

  • Cannot get windows media center in windows 7 ultimate 64-bit update as well as digital cable Advisor is displayed. ____

    Cannot get windows media center in windows 7 ultimate 64-bit update as well as digital cable Advisor is displayed. All I have is the not the Gallery library. I tried via tasks > General > auto update > download now and via high cmd.exe cd %SYSTEMROOT%\ehome
    start/wait mcupdate-u

    Uninstalling firewall antivirus and the disabled. Also tried with firewall on and gave the program and full access to the client update. Also tried with windows firewall on and off nothing doesn't work.

    And, now that I'm home and connected to...

    As promised, here are the download links for the DCA Installer:
    x 86: http://go.microsoft.com/fwlink/?LinkId=195559
    x 64: http://go.microsoft.com/fwlink/?LinkId=195560

    Re-reading your first post, I see also (this time) your Extras Gallery is completely absent.  You probably want that, Yes?
    This post to thegreenbutton should help it get there.

    Kind regards
    Chris

    MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Caught a virus. Want to just erase the HD and reinstall. Cannot get Windows original XP discs do. Help?

    Click son on some site that I can download a Trojan horse.  Disabled Malwarebytes and AVG update did not find. Saved that I need and now want to erase the hd and reinstall.  Cannot get computer to read what whatsoever. I myself once in safe mode, but now it tells me that it cannot find a hard disk.  I can refer to boot from the CD drive, but it gives me a blue screen error "cannot find a hard disk. Any help?

    Your computer most likely has SATA drive and the Windows XP installation disc does not include the SATA controller drivers so Setup can not 'see' the hard drive.  You have several options:

    1. to detect the drive, you must use the F6 method to provide the drivers of controller for the installation program, note that when you use the F6 method, the pilots MUST be provided on a diskette, the installation program will not accept the drivers from other media sources.

    Adding third-party or updated during the installation of Windows driver
    Mass storage drivers and the Setup process

    2. you can integrate the drivers into your installation CD:

    http://search.Yahoo.com/search;_ylt=A0oG7nPuhZFO4ikAUghXNyoA?p=slipstream+F6+SATA+drivers&FR2=SFP&FR=YFP-t-501&type_param=

    3. you can go into the BIOS and change the SATA controller in IDE mode and the Windows Installer will be able to detect the drive.  Most of the BIOS have this option is available, if you don't you will need to use option 1 or 2 above.

    John

  • try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work

    After having picked up some malware on microtour DX7300 of my wife, I decided to reformat the disk and reinstall.  For years and do not have a copy of the diskette of HP recovery that was created when we arrived first of all the computer.

    I have a copy of Windows XP Pro, installed in such a way that very well.  Device Manager is reported the driver problems with a large part of the devices as ethernet controller, audio, video etc.  I guess I can install most of the people afterwards, except the network/ethernet because I need, obviously, to connect to the internet.  Would have hoped that these devices are plug n play, but apparently not.

    I used a Ubuntu LiveCD to connect to internet.  So I know the network interface hardware works, and even audio and video resolution were out of the LiveCD.

    Found the drivers on this site:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3251397&...

    Those downloaded across the network.  In reading the DX7300, it is clear to me if the network card is the Broadcomm one or Intel.  Rebooted WinXP, I tried installing the Intel driver, got an error message no Intel device not found.  So I guess that's the Broadcomm one.  This driver, installation actually installed.  However, even after a reboot the network device does not work and presents itself as an error in the Device Manager.

    Thought I'd try to manually install the drivers by pointing "drivers" unpacked in the directory of installation above.  Windows indicated that the correct drivers were not found there.

    I'm at one end.  The material seems to work under linux, but cannot get the win to install the drivers.  Advice or help appreciated.

    Hello:

    This is exactly what I need.

    First install the Chipset driver and reboot:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-57823-1

    Then, install the graphics driver;

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-68806-1

    Then, install the MS UAA HD Audio Bus driver:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&swItem=PSG_I23303-108286&prodNameId=3251397&swEnvOID=1093&swLang=13&taskId=135&mode=3

    Then, install the HECI driver:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-46941-1

    Now for your pesky NIC... It's a NIC from Intel.

    Let's try this 'one size fits all' network driver Intel: you want the first listed download (XP 32 bit).

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&ProdId=1700&lang=eng&OSVersion=Windows%20XP%20%20Professional * & DownloadType = drivers

    Paul

  • Cannot get Windows Update to download updates continuous Error 0x80072EFD

    System is running Windows XP Home SP3. I tried all that in the article above and still can not get Windows to date. Microsoft Fix - it that starts automatically when you will allow you to join the article don't fix things not be and it gives me the same error code 0x80072EFD as the update of Windows. I can install updates from the Windows Update Catalog, but I can't just Windows Update to work. During execution of the controls in the article when I typed in Sfc.exe a Black Madonna window appears and disappears. There is Norton on that computer that causing Internet Explorer do not allow access to the internet and the Norton Removal Tool has been used to remove it. Immediately I could access the internet but when even could not get Windows Update to download updates. I tried to disable the Windows Firewall and still no help. I installed AVG and it finds several viruses on the computer, they were removed and still nothing with Windows Update. I even tried turning off AVG and nothing helped. Help! Frustrated.

    Ok...

    And how did you determine that the computer is no longer infected (i.e., by whatever it is)?

    What is now the computer state to Windows Update?

    Care of you answer all the question in my previous answer?

  • downloaded windows 8 preview cannot get windows media Center? has been installed on windows 7?

    My grandson downloaded the preview of windows 8! and I can't get Windows media Center? It worked well on windows 7, but all I can get now is windows Media Player. How can I return to my windows 7 and how can I get my windows media Center.

    You can add the Media Center of Windows 8 Preview Release.

    Click on "Where is Windows Media Center" in the following link which has steps to add the Media Center of Windows 8 Preview Release:

    http://Windows.Microsoft.com/en-GB/Windows-8/FAQ

  • Equium L300 - cannot get Windows 7 webcam drivers

    Hello

    I just upgraded my laptop Equium L300 to windows 7.
    The problem I'm having is, I can't get the webcam drivers.
    I tried vista drivers and I get the camera wizard, then the message

    "Open Webcam driver fail. "Please restart camera or computer ' tried this and still does not work.

    Like anyone else found this and could help you please.

    see you soon
    Omegauk

    Hey Omegauk,

    Can you please tell us which version of Windows 7 (32-bit or 64-bit), you installed this Equium L300 model you have exactly?

    In your case, I'll try a different driver. Currently for Equium L300 no webcam Windows 7 driver available but for similar L300 Satellite you will already find a webcam driver. You should try this one and post your result. Maybe it will work. :)

  • Cannot get windows or windows Defender Update

    I get the same error codes & I tried all the solutions suggested to update but none worked.  for the windows defender update I get error code 0 x 80240022 for microsoft update I get the 8024402C error code

    0x8024402C error code when you try to install updates on Microsoft Update or Windows Update Web sites
    http://support.Microsoft.com/kb/900936

    Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Cannot get windows media player to access the information in the web album

    I don't know what happened, but I can't get some information on the web when I copy a CD. Tried to reinstall windows 11 media, still have the problem. Has raced without change, tool, spybot, windows Defender malware. Hope someone out there has found it. My operating system is XP Pro.

    Thanks in advance, Steve

    Hello

    ·         You get the error message?

    Method 1:

     

    I suggest you to refer to this article and check if it helps.

    Add or edit media information

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/album-info

    Method 2:

    Also temporarily, try to Disable Antivirus and firewall programs and check if the problem persists.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Also see known issues of the link

    http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/readme#section_3

  • Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

    I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

    Hello

    Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

    If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

    Just in case you need to reconfigure your network.

    ---------------

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

    Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    -----------------------

    Jack MVP-networking. EZLAN.NET

  • New TS140 - cannot get Windows Server 2012 demo of R2 to install

    Hello

    I recently bought the TS140 and attempted to install the demo of Windows Server 2012 available from Microsoft.  I completed the following steps:

    (1) engraved an image ISO for the demo on a DVD.

    (2) load on startup the thinkserver DVD format the disk, download updates and prepare the installation.

    (3) at the end, I put the DVD in the drive.

    Despite the DVD being burned successfully, the guard TS140 eject the DVD and asking for the disc.  Issues related to the:

    -Someone installed via the demo and can give advice on the process?

    -Is the DVD of the right way to go or should I go with another method as a USB?

    Sorry, I'm use to the insertion of a DVD and occurring start installation.  Try to install after the initial drive of Lenovo is causing me some confusion.

    Thanks for your help!

    First of all, thanks to all for their persistence I managed to do the work.

    Basically, if you download the ISO of the evaluation version, YOU cannot USE the native Windows ISO burner.  When I copied on a drive and had Windows burn, it just don't understand the disc.  However, when I used the Windows store software specially set up the server:

    http://wudt.codeplex.com/

    He worked very simply.  I am extreme newbie, so it was difficult.  If you have purchased a TS140 and try Windows Server, follow these steps:

    (1) copy eval on the Microsoft site.  They have like 10 files to download, but you only need one ISO.  I don't know how the other files.

    (2) use the ISO burner of the Microsoft store - its registered for use with Windows 7 but worked like a charm.

    (3) use the boot (ThinkServer Easystart) disc that comes with your server, or as a recommended download the most recent copy.

    4) go through the steps.

    (5) when you are prompted, insert the new drive of Windows Server R2 2012.

    (6) it must go through the installation.

    Once again, thank you for not giving up, and I hope that my instructions about help an absolute beginner.  Probably simple for experts from the server, but I've never used Windows Server (other than Windows Home Server which was awesome, but abandoned!)

  • Cannot get Windows Media Center to recognize remote STB

    I have a desktop Gateway computer with an AMD Phenom 8400 Triple Core processor.  He is 1 year old and runs Windows Vista.  The Windows Media Center seems to work perfectly.   Recently, I decided to add the TV option to the computer since the last of my children has left and I got a set-top box (STB) available.  I have Verizon FiOS service and I made connections that were provided in the installation of the gateway documentation.  I know it is getting signal through because when I try the manual set up the process, I get a small square window of 2 inches with channel 3 in it.  I can change this channel with my set-top box remote to all channels that are available from my service.  When I continue on in the whole of the process I get to a point where it asks me to point my remote decoder and press on and press and hold the '0' button so Media Center can learn the codes (and, I presume, activate the remote control centre for use).  It is never past "0".  I have new batteries in the tuner and I tested it on another box, so I know it works.

    I tried put automation in place two option first and that didn't work either--that's why I went to the manual set up.

    As I said above, the Media Center works great with all other options and the MSNBC documentary line CD/DVD playback, etc..  It's just the TV live set up for the Media Center tuner that gives me a royal pain.

    I hope someone can help me to finish the game.  Thank you, John.

    Looks like you are trying to change your set-top box with a remote control channels of Media Center.  To use Media Center with a set-top-box, you would need a remote control Media Center and one cable IR and remote sensor.

    Please see the following diagram: Media Center and your set-top box

    During the implementation of process Media Center application that aim you the decoder at the remote sensor and press the 0 key.  The remote sensor at the moment will record the signal from the remote control so that it can be reproduced for the decoder when the Media Center remote control.

    -Thank you

  • Cannot get Windows 7 or 10 on NEW Inspiron 3650

    New computer, less than 3 weeks old. Reference Dell 3650 Intel i5-6400. I don't know what you need to know? SATA, Bluetooth, wifi, HD 1 TB, Nividia graphics.

    They never sent me the system drivers/operation right out the box records when Windows 10 had a few teething problems minor during the first week of use (and me being semi biased against him anyway since I'm generally a Win7 user) I decided to go back to Win 7. I used the Micrsoft tool for USB flash burning and installed Win7 Home Premium. The installation took, but without my factory drivers drive most of my drivers were not installed including my ethernet network card and wifi so I was DOA. Called Dell, they have been great and sent the discs the next day.

    I had a few problems with the drivers, they sent me does not install/work and I thought okay although they are 10 for my build windows drivers. I should have stopped, worked on getting good win 7 drivers for my network card got hooked to the net and ran windows update or update my drivers manually from the Web site. I don't have. :( Instead I went to work to put Windows 10 on it and that's where the problems started...

    Errors... tons of them...

    Disk locked

    Missing partition

    No bootable device... Changed to a legacy secure boot disabled startup. Not much better and no luck. Ran chkdsk that everything works well, so this seems to be the software problem.

    Then, I found that it had deleted my recovery disk that I didn't see what he listed more... The disc only I see is my 1 TB almost hard drive now, is that correct? I let fall to win allows 10 and thought ok try again 7 since it worked once. From what I can tell there is no operating system on this subject either right now. I decided to do a clean install of windows 7 and I formatted my drive C to NTFS. I changed the boot order so it could start on my USB which is where I got the image... and the windows 7 files started to load. Now I get:

    CD/DVD device driver when installing win7 error. Nothing I try works. I tried many fixes posted on the net for this mistake, passage to usb 2.0 and others and nothing works. I tried to put my INtel drivers on a flash drive, but it does not recognize. I'm stuck. What should do?

    I am novice to intermediate when it comes to all of this.  Years, I scoured the forums looking for answers and I've always been able to solve my problems of software, this is the first time I actually posted a question.  I don't know where to go from here. If only I could get an OS on it I feel like I could get this computer up and running, download the drivers installed etc... Is it possible to install drivers without operating system? Is there a work-around that works for me for this constant cd/dvd driver error during the installation of windows 7?

    Help... Laughing out loud... Had 3 days ago. The computer works fine apart from that, and I didn't have to ship in return. I have at this point, he can't return to the store by their return policy, but it is under warranty from Dell. It's my fault for trying to go down and update without driver disks. What should do?

    You need to F6 and Secure boot OFF, ON Legacy CSM drivers.

    And you can not delete a Windows 10 partition with windows disk 7.

Maybe you are looking for

  • Calculate the average price

    Hello I try to get the calculation of a price per product. In the example: Company X sells 1000 blue widgets for US $4.00 Company sells 1000 blue widgets US $3.80 Company X sells 1000 red widgets for US $4.00 Company sells 1500 red widgets US $7.00 T

  • HP envy 15: fingerprint reader stopped working

    F-Reader has suddenly stopped working. Please guide. Kind regards Dieudonné

  • Photostream Apple has stopped working, solutions?

    Microsoft looking for a solution, but none has offered.

  • Locate deleted files

    Recently, my computer upgraded to windows 10 on its own and I noticed that my files are missing. I looked online to recover my files and succeeded in a first time. I moved everything to my office in a folder so that I could access my missing files. T

  • mail error ID: OX80070005

    Excuse my English, I tried to send some pictures to a relative, and the last two days, Windows live mail does not work.  I get error massage ID: OX80070005.  I tried set-aside education aid in the mail and no luck. Please help Roberto