Similar Questions

• Phone goes into silent mode automatically

  My Moto X goes into silent mode automatically when I get a call. and the rest in this mode until I have to manually increase the volume. I have not modified parameters or installed any new apps out later. How can I solve this problem? I'm on the vodafone network.

  Thank you

  Are you going to try from your phone in safe mode and test this it? If this does not happen in safe mode it is most likely caused by a 3rd party app. First things first and this test in safe mode. I hope this helps.

• "PING [ARC2]: Heartbeat cannot connect to standby mode"

  Dear Experts,

  I have n/w connectivity between two servers.  IP is the ping requests.

  But primary alert log datbase shows PING [ARC2]: Heartbeat cannot connect to standby mode '

  This standby alert log database already mounted.

  SYS > select nom_dest, status, type, database_mode, recovery_mode, error, destination, synchronization_status from v$ archive_dest_status where type = 'PHYSICAL ';

  STATUS TYPE ERROR DESTINATION SYNCHRONIZATION_STATUS RECOVERY_MODE DATABASE_MODE NOM_DEST

  ---------------------- ------- -------- ---------------- ------------- ------------------------------------------------    --------------- ----------------------

  LOG_ARCHIVE_DEST_2 ERROR PHYSICS FORCE RESCUE IDLE ORA-16058: standby database instance is not mounted stby_crmsdb CHECK the CONFIGURATION

  Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.

  Sam Oct 31 12:20:12 2015

  Errors in the /u01/app/oracle/diag/rdbms/crms/crms/trace/crms_arc2_32417.trc file:

  ORA-16058: standby database instance is not mounted

  Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.

  Sam Oct 31 12:26:16 2015

  Errors in the /u01/app/oracle/diag/rdbms/crms/crms/trace/crms_arc2_32417.trc file:

  ORA-16058: standby database instance is not mounted

  Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.

  Sam Oct 31 12:32:18 2015

  Errors in the /u01/app/oracle/diag/rdbms/crms/crms/trace/crms_arc2_32417.trc file:

  ORA-16058: standby database instance is not mounted

  Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.

  Sam Oct 31 12:37:20 2015

  Errors in the /u01/app/oracle/diag/rdbms/crms/crms/trace/crms_arc2_32417.trc file:

  ORA-16058: standby database instance is not mounted

  Heartbeat PING [ARC2]: Unable to connect to the day before "stby_crmsdb". The error is 16058.

  Sam Oct 31 12:38:31 2015

  > > On standby server I delivered after a command.  Cloning process is running

  $ rman target sys/passwd@CRMSDB auxiliary sys/passwd@STBY_CRMSDB

  ...

  ....

  > > alert_log ensures msgs

  Sam Oct 31 12:07:17 2015

  Connections of RFS were rejected

  change the basis of mountain rescue

  Defined in the converted due to the incompatibility of db_unique_name control file

  Change di2dbun of MRC to stbycrms

  ARK: START OF THE ARCH PROCESS

  Sam Oct 31 12:07:21 2015

  Arc0 started with pid = 22, OS id = 7103

  Arc0: Started archiving

  ARCH: FROM PROCESS ARCH COMPLETE

  ARC0: FROM PROCESS ARCH

  Sam Oct 31 12:07:22 2015

  Mount of redo thread 1, with mount id 1596596917

  Physical Standby Database mounted.

  Lost write protect mode the "typical" value

  ..

  Sam Oct 31 12:07:22 2015

  Arc1 started with pid = 23, OS id = 7105

  Completed: alter database mount standby

  Sam Oct 31 12:07:22 2015

  ARC2 started with pid = 24, OS id = 7107

  Arc1: Started archiving

  ARC2: Started archiving

  Arc1: become the "no FAL' ARCH

  Sam Oct 31 12:07:22 2015

  ARC3 started with pid = 25, OS id = 7109

  ARC2: Become the heartbeat ARCH

  ARC3: Started archiving

  ARC0: FROM PROCESS ARCH COMPLETE

  Sam Oct 31 12:07:24 2015

  Using the default for the STANDBY_ARCHIVE_DEST as USE_DB_RECOVERY_FILE_DEST parameter value

  > On primary and Stanby (output is even only)

  SYS > select thread #, max(sequence#) from v$ archived_log group thread #;

  THREAD # MAX(SEQUENCE#)

  ---------- --------------

  1 14452

  Your standby database health seems good and is in phase with the primary. Mistakes "hearbeat failed", you've seen, maybe during the RMAN duplication, Eve could have been returned a couple of times, who would have said these errors in the primary alert log file.

  -Jonathan Rolland

• WSD Print device device driver prevents computer from going into standby mode

  WSD Print device device driver prevents computer from going into standby mode

  This message indicates that the computer was unable to fall asleep by a device driver.

  Look for the drivers updated printer manufacturers website or run the Microsoft Fixit:

  http://support.Microsoft.com/GP/printing_problems

• My printer interrupts communication with my PC when the P.C. goes into Standby Mode. Why?

  Until yesterday, the printer worked fine.  There is no cable or hardware change any.  I am running Windows XP with a jet of Lexmark color printer.

  When I restart the printer works fine.  However when the order goes into standby or hibernation mode, I can print is no longer when the box comes back active.  I get a message that "there is a communication error with the printer.  To correct this problem, a box appears I should go to start/settings/printer and make sure the "Enable bidirectional support" box is checked.  Unfortunately, I can't access the settings of the printer directly from the start menu.

  However, if I click on 'Options' that is displayed when the printer stops and I click "Troubleshooting", I don't see that the "enable bidirectional printer media" is more verified.  If I check, I get a message saying "printer is busy".  If I click on start again I get the same message and the "enable" box is unchecked.  If I hit Cancel, the box is also disabled.  I enter a loop that does not end.

  Any ideas how I can access the printer directly from the start menu settings?  Or how to prevent the impression of no longer communicate with my PC when it goes into sleep mode?

  Thank you much, long in advance for any suggestions you may have.

  It is a Lexmark Z-52.  After 8 hours of trying many different, including the link ideas that you suggested, I have determined that as a result of some recent Microsoft Download, the printer would work only if I used the Dell printing device incorporated in the installation software.  If I tried to install the Lexmark printer from the installation disc, I got the persistent problem.  I deleted all but access to the printer through the installed also origin and everything of fine.

  When I need to change the cartridges and align the jets, I install the Lexmark program, align the print cartridges and then remove the program Lexmark, using the default value of Dell for the printer remaining.

  It works, but why I had a problem, I don't know.

  TNX for the comments!

  Big Phil1

• Vista goes into sleep mode automatically just after the restart

  The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

  Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

  The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

  Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

  It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

  I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

  It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

  Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

  Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

  After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

• Cannot restart into recovery mode

  Q: unable to reboot in recovery mode

  Hello!

  My Mac mini (late 2009), Mac OS x 10.11.6 (El Capitan) is:

  (a) is NOT encrypted with FileVault 2 and

  (b) is NOT protected by a password of the firmware.

  (c) new facility in the Apple Store.

  My problem: I can't reboot into recovery mode! I'm out of the country.

  Using CMD - R or a normal reboot takes me to a screen with a single user: my orginal admin account and does not show a log in window with all users.

  Restart that holding down while the Option key displayed in the Boot Manager only my internal drives defined as Raid mirror.

  What else can I do to be able to reboot into recovery mode?

  Thank you!

  If it only gives you the possibility of a connection to reboot, sounds of course like FileVault.

  However, he should still go to recovery.

  If you are on a wireless keyboard, hold cmd - r as soon as you hear the startup tone, not before?

  The Boot Manager does not show the recovery partition if you have a CoreStorage configuration (which happens with FileVault). I don't know how RAID affects FileVault or recovery.

• Windows XP go into standby mode

  When I click on the icon the computer shutdown ensures he begins to go into sleep mode and then turns back on. I can hibernate the computer or stop it but not in standby

  Can go into the Hibernate mode, but not the sleep mode so use Hibernate

• T1530: DJ T1530 won't go into standby mode

  Hello

  We just bought a printer, DesignJet T1530 but we are facing a problem: printer will not go into sleep mode... and is very noisy (blowing fans)

  We put it up to 5 min, tried other times without success.

  Does anyone has a tweak?

  Thank you for your help.

  firmware: MRY_04_02_00.5 (will try the last of them but no indication on this issue in the release notes)

  SOLVED

  First of all, I tried to disable the internet functions without success.

  Have updated the firmware from MRY_04_04_00.4 and I appreciate very much the printer now in mode 'sleep'.

• Windows won't go into standby mode.

  I recently installed a new router (Linksys E3000) to link to a new laptop from my old office.  Now when I try to go into sleep mode, I get a message that says that the COM1 port prevents the day before the race.  He suggested a driver incompatibility.  The folks at Linksys say that it is a Windows problem.  Is it?  I have the Ethernet cable from my router connected to my desktop via COM1.  Thanks for your help.  BTW, everything works fine.

  Hello

  Try the solution listed: http://support.microsoft.com/kb/810905

• Computer XP is not going to standby mode automatically

  I went to control panel, click on view and then clicked on power but I still can't get my computer to go to sleep automatically. Can you please help.

  * original title - I have a praoblem with my office. I have windows xp and I can't get my computer to go on standby automatically *.

  Hi sher john,.
   
  Here are some links that you might find useful:
  Windows XP does not enter standby after the exact period that is configured in the Power Options profile
   
  The computer cannot enter sleep or hibernation mode if a Direct3D screensaver is running
   
  How to solve the problems of hibernation and standby in Windows XP

• Printer won't go into Standby Mode

  I just bought printer e-all-in-one HP Photosmart 7510 - C311a, and constantly when my Mac that works on OS X starts in mode 'sleep' the printer sounds as if it is being initialized.  It also has a message on the screen to turn off the unit to avoid damage.  I do not understand, this printer is a 'sleep mode' too?  I don't want you must manually activate it offshore, but he makes too much noise until the mac is turned back on.  What should I do?

  Is the printer plugged into a power strip or surge protector?  If so, plug it straight into the wall.

• my iphone won't go into standby mode

  I recently bought an iphone SE.  Recently, I noticed that my phone will not mode when connected to usb or power standby. The screen just goes dimmed, but does not go to sleep mode

  Is this normal?

  THX

  "Sleep" mode should make the display turns off. Is - this just dim halfway? If so, it is not normal.

• How can I solve "heartbeat cannot connect to standby mode.

  I have a dataguard with this form:

  • Name of primary host = TEST IP = 10.4.1.31
  • Name of host Standby = used2 IP = 10.4.1.32

  ---------------------------------------------------------------------------------------------------------------------------------------------

  Tnsnames.ora en Primario

  tnsnames.ora # Network Configuration file: /u01/app/GRID/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  STD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.4.1.32)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = std_DGB)

  )

  )

  PRUEBA1 =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.4.1.31)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = PRUEBA1_DGB)

  )

  )

  ---------------------------------------------------------------------------------------------------------------------------------------

  Tnsnames pending:

  STD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.4.1.32)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = std_DGB)

  )

  )

  PRUEBA1 =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.4.1.31)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = PRUEBA1_DGB)

  )

  )

  ------------------------------------------------------------------------------------------------------------------------------------

  The earpiece on the primary:

  
  

  Summary of services...

  Service 'PRUEBA1_DGB' has 1 instance (s).

  "PRUEBA1" instance, status UNKNOWN, has 1 operation for this service...

  Service "std" has 1 instance (s).

  Instance "std", State LOAN, has 1 operation for this service...

  Service 'std_DGB' has 1 instance (s).

  Instance "std", State LOAN, has 1 operation for this service...

  The command completed successfully

  --------------------------------------------------------------------------------------------------------------------------------------

  The listener on hold:

  Summary of services...

  Service "PRUEBA1" has 1 instance (s).

  "PRUEBA1" instance, State LOAN, has 1 operation for this service...

  Service 'PRUEBA1_DGB' has 1 instance (s).

  "PRUEBA1" instance, State LOAN, has 1 operation for this service...

  Service 'std_DGB' has 1 instance (s).

  Instance 'std', status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  ------------------------------------------------------------------------------------------------------------------------------------

  I am able to connect via sqlplus on primary eve and Eve elementary school

  -----------------------------------------------------------------------------------------------------------------------------------

  I am able to do tnspings between servers

  ------------------------------------------------------------------------------------------------------------------------------------

  DataGuard configuration:

  DGMGRL > see Configuring

  Configuration - TESTJ10

  Protection mode: MaxPerformance

  Databases:

  prueba1 - primary database

  STD - Physical standby database

  Fast-Start Failover: DISABLED

  The configuration status:

  SUCCESS

  -------------------------------------------------------------------------------------------------------------------------------------

  DataGuard show this error:

  DGMGRL > crossing the prueba1

  Continue to pass, please wait...

  New primary database "prueba1" opens...

  The operation requires the start the instance "std" on database "std".

  Start the instance 'std '...

  Unable to connect to the database

  ORA-12545: Connect failed because target host or object does not exist

  Failed.

  WARNING: You are more connected to ORACLE.

  Complete the following steps to complete the digital switchover:

  marketing and get the instance "std" of database "std".

  -------------------------------------------------------------------------------------------------------------------------------------

  Monitoring the log says:

  Logging of 1034 errors received on the eve

  Heartbeat PING [ARC2]: Unable to connect to the eve "std". The error is 1034.

  ---------------------------------------------------------------------------------------------------------------------------------------

  How I can solve this error, I tried everything but the error persists.

  I'd appreciate your help!

  Hello;

  Generally, it is a question of the name of the host, but given your configuration I would check the firewall first.

  Best regards

  mseberg

• Satellite A210-16F - cannot switch to "standby" mode if I have the performance mode

  On my Toshiba Satellite A210-16F glitch:

  When I high performance on laptop it does not fall aspleep. But when I have Power saving mode then all is good. He aspleep to fall. Do you know how is it behaves?

  Where is the problem?

  Great news, buddy! :)