Cannot install application software

I acnt install software application such as adobe dream weavercs3, antivirus, JDK1.5 etc...

Aamir Attari

I acnt install software application such as adobe dream weavercs3, antivirus, JDK1.5 etc...

Hello Amir

You always struggle to install the software on your computer in Windows 7 RC?  We had several post on Adobe CS3 software installation problems.  You must ensure that you have no other product from Adobe installed before you try to install CS3.  If you have Flash, Shockwave, Acrobat is installed, they must be uninstalled.  Once you have removed Adobe programs, you should be able to install CS3.  What antivirus program you are trying to use?  It is one of the programs that have been tested and work with Windows 7?  Here is a link to a page of software compatibility to Microsoft Windows 7 RC:

http://www.Microsoft.com/Windows/compatibility/Windows-7/

Let us know if these suggestions have you helped to resolve your problems.

Thank you

Jack

Jack
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Cannot install new software because XP has said that there is another current installation

    I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

    Hello

    1. have you you can all changes on the computer before this problem?

    Check if the problem persists in the clean boot state.

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

  • Cannot install all software: error: an application not valid win 32

    I can't install any software and so or troubleshoot using microsoft fixit tool as they don't install it, analyses using malwarebytes and nothing came, iam at wits end.tried to use scandisk and cannot open it because of win 32 error and run as admin does not work either.

    Original title: the user interface have a pad with windows home premiun thinj lenovo and when I try to click on an icon I have an application not valid win 32

    Hello

    This problem may be caused by one of the options below.

    1. the file is corrupt, missing, or bad.

    2 file is not designed for your version of Windows.

    3. the file is a virus, worm or other malicious program file.

    4. incompatibility of hardware.

    Step 1: Check if the problem continues in a new user account.

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Step 2: If the problem does not persist in a new user account, then refer to the following article to fix a corrupted user account.

    Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile

  • Error when you try to install QuickTime: another installation is being run-cannot install new software

    Original title: another installation is being run-canot install new software.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I can't identify what software is running. I had this problem in recent weeks. It cannot install QuickTime.
    Thank you

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi marvinsadovsky,

    ·        What is the exact error you get when you try to install QuickTime?

    ·        You are able to install any other application?

    You try to install QuickTime by starting the computer in a clean boot state, because some background programs may interfere with the installation process. To put the computer in a clean boot state, follow the link below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Update to Windows 7 RTM failing - error 80070652 - cannot install new software or run Windows Update successfully.

    I upgraded from Win 7 RC for Win 7 RTM on my 64-bit machine from Dell and started installing all my software.  Everything was fine until I started Windows Update and had a list of 15 updates that needed to be done.  Several have had agreements that I had to accept, he wasn't the normal process of "update in the background.  I had to leave and is concerned to let the process of continuous updating on its own and potentially hang, so I cancelled it.

    Since then, I can't install any software or to upgrade my system.  Updates fail with the error message "WindowsUpdate_80070652" which seems to be undefined.  In some cases, I get an error message another installation is running and the current installation or update cannot be performed until the end of the current installation.

    I restarted my dozens of machine time and then immediately began installing or upgrading windows - without success.

    Any suggestions would be greatly appreciated.  It seems that there is a dead plant that does not block updates and installs.

    Jeff

    It is not an error "undefined":

    WindowsUpdate_80070652 = ErrorClientUpdateInProgress ERROR_INSTALL_ALREADY_RUNNING
    The program to be upgraded is may be missing or the patch may update a different version of the program

    You could always...

    Launch a collateral request for assistance free Windows Update:
    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

    ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

  • Cannot install applications he said missing files or if it install it comes up with open with dialog

    I tried to install the software after the installation of the operating system on my new internal hard drive. But whenever I have to install something it says some missing files and even if it installs I could not open the application. It popups opened with the dialog box.

    Hello sandrine,.

    I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

    1. After you have installed Windows on your PC, you are able to install Windows updates?
    2. Have any security software installed?
    3. What is the exact error code/message you get when installing applications?
    4. Are you logged in with an administrator account or a standard account?

    Try these steps and see if it helps you to solve the problem.

    Method 1

    First of all, try to run the fixit/convenience store described in the article mentioned below. This fixit is used to fix the below mentioned corruption.

    • Registry keys damaged on 64-bit operating systems
    • Corrupt registry keys that control the update data
    • Problems that prevent the installation of new programs
    • Problems that prevent existing programs are completely uninstalled or updated
    • Problems you block of uninstalling a program through Add or remove programs (or programs and features) in Control Panel.

    Solve problems that block the programs to be installed or removed

    Method 2

    There could be a chance that the service responsible for the installation of application does not run. So, I suggest you to check if the installation service is running and its status is automatic.

    • Press the Windows key + R to open Run box.
    • Type services.msc in the Run box and press on enter.
    • Look for the Windows service install.
    • Right-click on the service and select Properties from the list.
    • Start the service if it is not executed.
    • Make sure that the Startup type should be Automatic.

    Get back to us with all the necessary information and the result of the proposed suggestion. We will be happy to help you further.

    Kind regards

  • Cannot install old software under Win 7

    I just bought a Win 7 laptop to remove or replace a desktop XP computer. Initially, it came with Win 7 Home Premium. I could not install an earlier version of the software Quickbook, who previously installed and running well under XP or Vista.  See in-store technicians; they all recommend the upgrade to Win 7 Professional so that it can run the program in XP mode. After this upgrade, I can not install the software.

    QuickBook Setup starts with run 'install' which is supposed to launch setup.exe. the latter is supposed to install Quickbook under Win 7 Professional.

    I appreciate any help from this forum! More recent Quickbook ranking would be simple, but for the fact that the data file is accessible from many other user/computer with earlier versions of Windows. Old QuickBook does not recognize the new Quickbook data format.

    Windows XP Mode is installed?

    Please note that Windows XP Mode is a separate instance of Windows to be installed first, and then you need to install the software inside Quickbooks, which will then run the application from Windows 7. The following article will show you how to set up Windows XP Mode and how to virtualize your application (ignore the part about setting up hard assisted virtualization)

    Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

    If you have not yet downloaded Windows XP Mode:

    Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
    For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Cannot install application manager

    I tried to install and it says "Adobe Application manager cannot install" I use a PC with Windows 7.

    Hello

    You can download Adobe creative cloud Office from the below link

    https://creative.Adobe.com/products/creative-cloud

    Incase if you always the same error then try to rename the folder to OOBE.old OOBE, then download Adobe Creative cloud and install.

    Location of OOBE

    \AppData\Local\Adobe\OOBE name of C:\Users\[user]

    and

    C:\Program Files (x 86) \Common Files\Adobe\OOBE

    Once it is renamed go on the above - mentioned link download desktop Creative cloud - install it.

    Thank you

    Kapil

  • Cannot install HP Software Solutions for C5550 on Vista

    I recently bought a new Photosmart C5550 all-in-one printer. I spent two full days, try to install the software on my Vista desktop. After countless hours on the phone with technical support to get the same results (fatal error & Windows Installer problems), I was told to contact the computer manufacturer. Another two hours on the phone with tech support and was told to reinstall Windows. I've done reluctantly. I received all of the updates in my installed security software and then tried the printer... same results as before reintsalling Windows. I tried to reformat once more, updates installed and then installed the printer drivers & software before installing security software. It actually installed and worked very well.  Last week, I discovered that there is an updated driver and software of the printer so I decided to install it, don't think not that I would have the same problems. Is it installed perfectly on my laptop (which she had done before), but would not install it on my desktop. After another few hours in line with the technical support I uninstalled all the software and printer drivers & stop all unnecessary processes (including security software), but still no luck. I am now without a printer on my desk and can't figure out what to do. I don't want to have to reformat again and try to install. I wonder if I uninstall my security software if it works because the printer seems to install without security software installed. Any help will be appreciated. Thank you!

    Just to update, I registered & re-recorded MSI before installing since that was the error message that I kept getting.

  • OS6.6.0 RC2 cannot install applications

    I come to RC1 that works well.

    With RC2 I can't update the list of the app so can not install applications.

    The apps I use are PHPsysinfo and netdata mt.

    the official firmware os 6.6.0 solved my problems.

  • ReadyNAS 102 - cannot install applications (all)

    The evening

    I bought a ReadyNAS 102 in January, after an initial installation, I installed OwnCloud and decided that I didn't want so I uninstalled. This had the unusual side effect of uninstalling the main web server for the device, after having met the support team, I took the action at the factory reset my device, which has restored the main web server

    Since then I was able to install all the applications. Whenever I try to do, I get the error "unable to install ."

    I've recently updated to 6.2.2-> 6.2.4 firmware and I'm still having the same issues. Although now I also have the message "Apps operation failed: list of applications can be missing or out of date." You want to update the list now? ' - choose 'Yes' to this fact appear a message "update list" box

    I then get a response "list of the application updated successfully. You can now install applications", however, any application I try to install still does not work and the guest above is provided again.

    I would be grateful any advice anyone can offer to fix this issues.

    Thank you

    Chris.

    It turns out that the DNS has been set incorrectly and the NAS could not connect to the internet. Refreshing DNS on the Server NAS has solved the problem.

  • Cannot install printer software

    Try to install the software for the new printer and it does not allow me to. I changed our main account user to the Administrators group and rebooted the computer and the error msg still appears when I try to install the software that I am not an administrator. I even tried to disable UAC temporarily to allow installation and the error msg always comes to the top. Any suggestions? Tried to create a new user to be admin, but it would not allow me to create.

    When you go to run Setup, right-click on it and select run as administrator from the context menu; you will need to provide your credentials for administrator (user name and password).

    Kind regards

  • Error 1904 - cannot install the Software Desktop for blackBerry Smartphones

    I also had similar problems I've read on previous posts. I have four boxes of different error that arises when you try to install the software. I tried everything that was recommended at the previous posters, nothing helps.  Becoming very frustrated. I have a blackberry 8330 and windows xp. All reference failure to check of the diff dll errors. Any other suggestions?

    You may think using DTM WITHOUT Media Manager. Use the procedures to uninstall/install sdgardne, but download DTM without Media Manager.  Once done,

    Go to options-support card on your BB
    The settings should be:

    Media card support: on
    Encryption mode: no
    Mass storage Mode support: on
    Auto enable mass storage Mode when connected: Yes

    Once activated, when you connect your BB via the usb port, a windows Explorer will open and show your device as another drive on your pc. Then, you can simply drag-and - drop your photos, videos, music, documents between your pc and the BB.

  • Cannot install this software of HP Scanjet 3770HP Scanjet 3770 & Windows 8.0

    Unable to install the software from the HP Scanjet 3770 on my PC Toshiba laptop windows 8.0?

    If anyone can help with this?

    Hello

    Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

    As I see that there is no drivers for Scanner HP Scanjet 3770 flat. I suggest you to install the drivers for Flatbed Scanner HP Scanjet 3770 Windows Vista compatibility mode.

    Make the programs more compatible with this version of Windows
    http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

    Post us the results after trying the steps above.

  • Cannot install applications on the computer, the error 0x800706ba.

    Original title: 0x800706ba error

    I just bought a new computer, and updates have been installed last night.  I'm unable to install applications on the computer, I get an error 0x800706ba code.  Help, please.

    From the desk of
    Press the Windows key + R
    Type WSReset.exe and press OK

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

    Method 3:


    You can try to run Apps Troubleshooter

    Download and run the troubleshooter modern UI App and check.

    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

    Please use the following links as reference:

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

Maybe you are looking for

  • photo project

    Hello If I create a new project using photo on my iMac can do I access on my laptop? Thanks for your help... from a novice!

  • Cannot configure e-mail after account deletion.

    All of a sudden couldn't receive mail - name and password not recognized.  Verified domain host - no problem. Apple support suggested upgrading to Version9.3, this did not help, so he suggested to delete my account and install again, now can not impl

  • Siri local content (via iTunes)

    I bought the new Apple TV so that I could use Siri on my help of local content in iTunes on my Mac Mini server - will be activated this feature I have hundreds of movies of physical distribution that have been converted to M4P and loaded into iTunes,

  • Camera Foscam wireless to the Valet M20 router connection.

    Try to install two cameras Foscam on my PC (windows 7). The "OUTSIDE" camera is model F19805W and 'The INSIDE' a F19831P model. The works of a single 'INSIDE' ok as a device connected wireless; However, cannot get 'OUTSIDE' unit to connect the Cisco

  • I just replaced all 4 cartridges in my 6500 all in one.

    I just replaced all 4 cartridges in my 6500 all in one.  For all the ink levels are good.  Black ink will not print.  The alignment will fail.  Print test HP troubleshooting page and it was empty.  Suggestions?