Cannot install driver button thermal Mode for Y430 on Windows XP

Similar Questions

• Cannot use internet in desktop mode, but can in Windows 8 mode. Help?

  Hey having a lot of problem with Windows 8 Pro cannot use internet in desktop mode but can in Windows 8 mode?

  Hey having a lot of problem with Windows 8 Pro cannot use internet in desktop mode but can in Windows 8 mode?

  I found myself with the same issue - although, for me, everything was working and then stopped at random...

  Since there is no useable answer to your question here, I begin troubleshooting me...

  What I found was a simple enough solution which seemed to reset the internet connection in desktop mode:

  1. to reveal desktop mode from the menu of charms (roll mouse over the right side of the screen)

  2. Select the charm of "settings".

  3. Select 'Network' in the parameter options

  4. right click on the network, you're connected to, and then select "turn sharing enabled or disabled.

  5 turn on network sharing

  This should reset your internet settings and retrieve your desktop mode in the loop...

• Cannot install driver for Canon selphy cp720 on Windows 8

  Cannot install the driver on windows 8

  I was indeed able to correctly install the driver Windows 7 on Windows 8.1 (x 64). I downloaded the V4.0 - German pilot (since it's my native language) page of Canon and used Compatibility Settings (Windows 7 + admin) Support and the executable installed the driver without worries. After the Installation of the printer showed normally and I am able to print photos using Version 8.1 Windows of the guns 'ImageBrowser Ex' (which I installed in front, requiring "Run as Administrator" too, otherwise indicating a failure during install).

• Cannot install 6980 in adhoc mode

  My 6980 printer was working well with only an occasional glitch with an ad-hoc connection of the laptop computer with printer.  This is my only network.  Last week, he stopped printing by saying the 'print spooler could not connect.  After many attempts to correct the problem, I'm still stuck.  I emptied the spooler, uninstalled all hp software, cleaned the registry and tried to reinstall with no luck.   I run Windows XP with service pack 2.  My wifi radio detects the printer and I am connected to "hpsetup".  When I try to install the software I never get the possibility of a Wi - Fi connection.  I have the USB option or network.  If I choose network it detects the printer, whether it is to install, the IP address is the same as that indicated on the print to the printer, (my wifi radio indicates a different ip address, I don't know if it should or not).  When I click on Yes, the programs runs for a few seconds then returns to the previous screen the asking if I want to install via USB or network, it remains stuck in this loop.

  The printer works if I use a USB cable.  I tried to use windows wireless network configuration, but it asking for things I have not or know.  I have not had any problems with the initial installation almost 2 years ago so I do not understand why the difficulty now.  I also disabled my antivirus and firewall protection which made no difference.  I also trie dwonloading installation and software programs fron this web site, but still have the same problem.  Ant help would be appreciated.  I'm so frustrated.

  Try to manually add the printer driver to see if we can get you an impression.  This sequence works for XP:

  1. Click on the button 'Start'-> Printers and faxes.
  2. Under print jobs, click on "add a printer".
  3. Click on the button 'Next' in the first window of the add printer Wizard.
  4. If the option Local or network printer appears, select Local printer attached to this computer, and click Next.  Make sure that the "Automatically detect and install my Plug and play printer"option is unchecked.
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the printer to add Standard TCP/IP port Wizard" make sure that the printer is enabled and configured. Click on the button "next".
  7. Under 'Add Standard TCP/IP printer Port', type the host name of the printer (this is the host name of the printer that print on the netwotrk configuration page)
  8. under "Information Port" select "Standard". Click next and then click Finish.
  9. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  10. The name of the printer is highlighted in the next window.
  11. Click on the button "next".
  12. He asks the name of the printer - leave it as what.
  13. Select "Yes" to make the printer by default.
  14. Click on the button "next".
  15. The printer sharing dialog box opens.
  16. Click on the button "next".
  17. The Page of Print Test box.
  18. Select the "Yes" option to print a test page.
  19. Print the Test Page.
  20. Completing the Add Wizard box printer appears.
  21. Click on the 'Finish' button and wait for the files to be copied

• Cannot install driver update.__Graphics need something. He tells me that there is a solution.

  I have two problems. The first is, I can not install the patch (KB973636) I get an error code 646.
  Then when I look into the solutions of a problem my graphics device disk has stopped.  I check the updates and it indicates that the driver is up-to-date.
  I'm relatively new to the computer, so I do not understand all the terms.

  Hello

  You have Works 8 installed on your computer? If this is the control panel - Windows Updates - right-click on
  It CACHE - sometimes updates will offer an update, that you don't need.

  If you work 8 go here and put the KBxxxxxx number to download.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  ----------------------------------------------

  To the problem of display driver (video), update your video driver manually using these methods - you can also update
  others as needed.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173)

  I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173).

  According to Microsoft Update, the error code is 0 x 643.

  I tried to install the update during a clean boot without result.

  Here is the log: https://skydrive.live.com/redir?resid=DDC6388AB2460543! 117

  Hello

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I would say you can do clean boot and install the update.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 3
  I suggest you to download and install the update from the Download Center.

  RTM of Microsoft Visual C++ 2010 redistributable MFC security update
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21576

  Method 4
  I suggest you try the steps from the following link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Installer doesn't seem to work properly. Cannot install driver printer and other items.

  Earlier this week, I got a virus.  That was resolved, however, my printer did not work properly, so I tried to update the driver hoping that would solve the problem.  I could not install the driver, even after spending most of the day chatting with hp support.  I got following messages is displayed:

  "Windows encountered a problem installing the software driver for your device."

  and

  "Cannot install the printer.  Impossible operation completed (error 0x000003eb). »

  I hope someone is able to help!

  Thank you.

  I'm all set... solved my problem of microsoft support... I shouldn't have wasted my time with hp!

• Windows 7: cannot install driver card reader

  OS: Windows 7 pro 64-bit

  When I used to have vista windows my card reader everything has worked well. After installing win7 it doesn't

  • Card reader: C-media USB 2.0 Mass storage Controller (0DB.5200) x 64
  • Sometimes I allow windows update to find and install the driver for the device. After doing this it does not start in normal mode, but only in safe mode
  • I tried to reinstall the driver. --> Device Manager uninstall the device--> windows update - pilot research etc.

  If it is a laptop, look for drivers for Windows 7 64-bit or Vista 64-bit on the laptop to the manufacturer Web site.  As you seem to have discovered, for 32-bit drivers do not work.

• Cannot install the drivers and software for HP Deskjet 5650

  I removed most of the HP entries to my printer from the Start Up. Since then I have not been able to get the Printer Wizard to start. Recently, I uninstalled everything related to the printer from Add Remove programs. Since that time I tried to install my HP drive. It comes up with the error that the software does not support my operating system. My operating system is Windows XP Home Edition SP3. The software is looking for Windows XP. I downloaded the drivers and software from HP. When it runs, it starts very well. For some reason, it isn't detecting my printer. After you select how the printer is connected to the computer and the connection at the same time the software tries to finish, but he comes up with an error and says it cannot complete the installation. I am able to install the drivers, but when I try to install the drivers and software is when the error appears. How can I fix? It would be nice to use the wizard for printer hp again.

  I found the solution to my problem. Before I could install the software and drivers for my printer that I had to remove completely all the software and the printer driver. Here's what I used to delete the printer driver. Restarting my PC after removing the printer driver has been the most important step. Everything works fine now.

• Cannot install driver Bluetooth on Windows 7 - X 200

  Hi all

  I have a problem after I installed Windows 7 on my Thinkpad X 200.

  Bluetooth with Enhanced Data Rate software II cannot be installed.

  He stated that 'Bluetooth device can not be detected blah... ". ». I also noticed that the bluetooth led is off when the wireless is lit.

  Thank you very much in advance for your help

  Hi wipoou,

  According to the support page, your system has built-in Bluetooth, but to activate it, you must install the keyboard shortcut functionality, then restart your system, then press Fn + F5 on the Bluetooth radio, once it is detected by Windows, install driver lenovo Bluetooth.

  I hope this helps.

• Cannot install driver Mobile Intel 945 GM Intel page Tecra A series

  Hi all
  The official page of Intel, there is a newer version than 6.14.10.4543 for the display driver! I download, but it fails to install saying that it is inappropriate for Toshiba computers! Why?

  The message says that all-> the driver is not allowed for Toshiba laptops.
  The Toshiba graphics drivers are a bit modified and not the same as the original graphic drivers from the graphics chip manufacturing.

  Try the Toshiba page!

• Cannot install driver Equium A100 - 147 LAN (ethernet)

  Hello

  I have the same problem, as in the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17316 section.

  I downloaded and installed all the drivers that I needed on my Equium A100-147, but not working no driver Lan (ethernet).

  I have windows XP, home edition, SP2.

  I tried both types of drivers Toshiba download (and a few others also), that should work... but unfortunately, it does not.

  I'd be happy if someone could help me. Thanks anyway.

  Adam.

  Hello Adam

  Thanks for the feed back, but I must say that I'm really confused why you have problem to facilities with driver on Toshiba download page. In any case, the problem is solved and that's the most important thing! ;)

• Cannot install the pkg of update for the windows client, I get error code0x8004ff84

  I get error code ox8004ff84

  Hello

  Method 1:
  You can read the following article.
  Cannot install Windows updates
  http://support.Microsoft.com/kb/555461
  Method 2:
  You can read the following article.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. See the following link for more information.
  http://support.Microsoft.com/kb/322756
  See also:
  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
  http://support.Microsoft.com/kb/906602
  It will be useful.

• Cannot install driver WIFI on my Satellite Pro DR L850-1

  Hi guys,.

  I installed windows 7 64 bit on my Toshiba Satellite Pro DR L850-1 by making the new partition which formats the hard drive.

  After installation I was expecting windows 7 will find the drivers from internet or if not I'll download them from Toshiba Web site.

  I downloaded and installed all the drivers from the LAN and WLAN drivers first.
  All the other drivers installed perfectly and their respective hardware works fine, but the WLAN Atheros driver that does not install the Setup program does not start and I tried all means known to me or I can find on the internet to install it.

  Any help will be much appreciated.
  Thank you.

  Generally after a clean OS install, you should start with the chipset driver, display driver, driver sound and so on.
  Have you installed driver chipset before you tried to install the WLAN driver?

  By the way: you try to install this driver from the Toshiba download page?

• Cannot install the update of security for Windows XP (KB982665)

  Original title: security update/install failures

  Siena is a re-post using the appropriate format: when I check for Microsoft updates I hit the express tab and most of the time I get the message 'install (s)' didn't like in whne I tried to download and install the 'a security update for Windows XP (KB982665)."  It is the rule, not the exception.  What should I do, please?  Thank you!

  Hi ubancosr,

  Try to download and install the update manually and check.

  Update security for Windows XP (KB982665)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5DDB5E34-F97A-47C6-96C8-BA2ED06CCB77&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.