Cannot install Driver Ethernet on my Equium A100-147

I'm trying to install my ethernet drivers and drivers that I got on the site, apart from not being able to access them on Sunday they do not work, windows does not pick up them and there seems to be no installation/configuration file?

Please can someone help this is really boring now...

OS: Windows Media
Wireless: works
Ethernet: Works not

Help!

Hello

It seems that the satellite A100-147 belongs to the PSAABE.
Please make sure that you have used and installed the correct LAN driver for this series!

I think the laptop is using a chip Intel-Ekron-R (82562GZ).

If you want you can download the driver of LAN (Ethernet) from the Intel page.
What works for sure!

Tags: Toshiba

Similar Questions

  • Cannot install driver LAN/WLAN on Satellite A100 - 289 PSAA9E Win XP

    Hello

    I installed Windows XP on a Satellite A100 - 289 PSAA9E, but I can not install the network and WLAN page driver drivers.
    I always get the message that no driver regrets were found (I manually chose the directory with the downloaded drivers)

    Can someone help me?
    Where can I get the right drivers network controller vor and WLAN card?

    Hello

    As much as I know Sam A100 PSAA9E series supports Intel 3945ABG wireless card and also an Intel LAN card.
    Driver WLAN can be found here:
    http://APS2.toshiba-tro.de/WLAN/

    On the European driver Toshiba page I could find drivers for Satellite A100 PSAA9E series.
    But note; You must choose the Archive in the type of product because it old series.
    There are two different LAN drivers;
    -LAN driver v 9.2.24 for Ethernet Pro1000
    -LAN driver v 8.0.43.0 for Ethernet Pro100

    In order to check both!

  • Cannot install driver LAN on my Satellite A100-036

    I change my Satellite A100 - 036 operating system for Windows XP SP2 home edition and the ethernet controller not installed it.
    I downloaded almost all the LAN driver on the Web from Toshiba site and it will not install.

    Someone help me pls?

    The BIOS must be updated to version XP!
    And the LAN driver must be installed from the Device Manager!

  • Cannot install driver Vista Ati for Satellite A100-169 (PSAA9E)

    Hi all I have problems to install the Ati 8.31.100.3.2WHQL drivers - 061124 has 2-039454C.
    The problem is I can not install the driver, Catalist Control Center is Ok, there is also no Chance
    to get it running by Device Manager "...\display\Packages\Drivers\Display\LH_INF\CL_39 454.inf".
    the error message "can't open the device!
    Here is the Log of the installer:

    Catalyst® - Installationsmanager
    Installationsbericht
    Wednesday, June 6, 2007 19:26:03

    Hardwareinfo
    Name of the ATI Mobility Radeon X 1400 graphics card
    Manufacturer ATI Technologies Inc.
    Geräte-ID 0 x 7145
    Offerers-ID 0 x 1002
    Klassen-Code 0 x 030000
    Revisions-ID 0x00
    ID subsystem 0xff10
    Subsystem-offerer-ID 0 x 1179
    Andere Hardware

    Aufenthaltsraume.man PaketeATI catalyst install Manager
    Catalyst Control Center
    Microsoft Visual C++ 2005 Redistributable 32bits

    As Installation packages
    ATI Catalyst Install Managerendgultiger status:
    Version of items: 3.0.624.0
    Size: 20 MB
    ATI-Bildschirmtreiberendgultiger status: failed
    Version of items: 8.31.100.32
    Size: 90 MB
    North Bridge filter-Treiberendgultiger status: success
    Version of items: 1.00.0000.1
    FAT: 1 MB
    Catalyst Centerendgultiger status:
    Version of items: 2.0.2519.38216
    FAT: 150 MB
    Microsoft Visual C++ 2005 Redistributable 32bitendgultiger status:
    Version of items: 7.3.0.0
    Size: 10 MB

    Andere jobs Geräte

    Fehlermeldungen
    Treiberinstallation: die Installation ist fehlgeschlagen
    Anwendungsinstallation: Fehlgeschlagen

    I hope someone can help me with this, Google has not been good for me
    Thank you

    Hello

    I wonder why you were able to install the Catalyst Control Center and not the INF ;)
    Hmmm in my opinion, the driver is ok, but the installation failed!

    You have unpacked all the files correctly ;)
    In the first step, I would recommend uninstalling the software graphical overview.
    After restarting again, you can try to reinstall again!

    By the way; AFAIK the A100-169 has been delivered with the graphic driver for ATI MOBILITY RADEON X 1600. I wonder why the information about the hardware reports the name ATI Mobility Radeon X 1400

  • Cannot install driver Equium A100 - 147 LAN (ethernet)

    Hello

    I have the same problem, as in the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17316 section.

    I downloaded and installed all the drivers that I needed on my Equium A100-147, but not working no driver Lan (ethernet).

    I have windows XP, home edition, SP2.

    I tried both types of drivers Toshiba download (and a few others also), that should work... but unfortunately, it does not.

    I'd be happy if someone could help me. Thanks anyway.

    Adam.

    Hello Adam

    Thanks for the feed back, but I must say that I'm really confused why you have problem to facilities with driver on Toshiba download page. In any case, the problem is solved and that's the most important thing! ;)

  • Equium A100-147 - where to find the ethernet LAN driver

    Hi all

    I have problems to find the dirver for my ethernet controller...
    I went to the toshiba Web site and on the LAN driver is not finished, he does that with any application to uninstall, doesn't have to install, missing problably...
    I could find on the web...

    I managed to install the wirelles, so I can use the net over there... but I want to install the LAN as well...

    Anyone know where I can find driver (ethernet LAN) Equium A100-147? *

    Thank you very much...

    Hello!

    Have you tried to update the BIOS?
    Check the Toshiba site for a newer version of the BIOS:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Equium A100-147: cannot install Vista because of startup configuration problem

    Equium A100-147 (Windows MCE) bought compatible Vista and bought my promised copy of Vista... used Toshiba step by step DVD ROM upgrade and also updated the Bios.

    Tried to load Vista Home Premium and after going through all the steps, it came with this message...
    «Could not update the computer startup configuration - installation cannot go ahead «...»»

    How should I proceed and what is useful to load Vista.
    Thanks in advance for any help.
    Considers that Howard.

    Hello

    How have you tried to install vista on the laptop?
    Have you tried to switch the MCE to Vista or were you running the new clean install of Vista?

    In my opinion, you must perform a clean installation. Don t updated the existing MCE of Vista.
    In such cases, you can join different installation problems

    If you are an owner of an original MS windows XP CD try to run the console of your windows XP CD recovery.
    Demarrer start from the CD at startup, and then press R to access the recovery console after loading the driver.

    In the recovery console, typefixbootand then restart your laptop.
    Then insert your Vista installation and restart.

    This should solve your problem.

  • Equium A100-147 - deleted CD/DVD drive

    I uninstalled the readers of DVD/CD ROM of my Equium A100-147 model PSAABE by mistake. How I can I restore it? I'm not very technical

    Hello

    It means that your CD/DVD drive is not more?
    Have you already checked the Device Manager if the drive is visible or not?

    Otherwise, you must follow the instructions in this Microsoft KB article:
    http://support.Microsoft.com/kb/314060

  • Equium A100-147 replacement hard drive

    Hello

    I got a toshiba Equium A100-147 by a friend. The only problem is that it comes without a hard drive, because he still destroyed his old hdd to protect its personal and professional data.

    I saw in a local computer store a disk sata hard very good price for only? Â £38 it's a 160 GB w Digital Scorpio 5400 RPM 8 MB Cache S - ATA HDD laptop someone knows if it will work or this laptop does it work-specific hdd?

    Looking forward to any help you guys can give

    Hello

    Of course you need a compatible HARD drive.
    There are two different standards of HARD drive. SATA and IDE

    You need the HARD drive with the SATA interface. I think the original HARD drive was 100 GB.
    So a 120 GB and maybe a 160 GB SATA HDD should also be compatible.

    As far as I know the HARD drive slot was placed at the bottom of the unit and a screw secures the plastic cover.
    It of really not difficult to replace the HARD drive and I think that the details could be found in the user manual.

    Good bye

  • Equium A100-147 - Native resolution on the external LCD display does not work

    Hello

    My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

    So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

    I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

    Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

    Can someone give me some advice for what can do?
    Thank you!

    Hello

    You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

    If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

    If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

    But first he must find out what external resolutions are supported by the GPU.

  • Equium A100-147: can not play games becauce slow DVD player

    Hello

    I have a laptop Equium A100-147. I tried many games on my laptop which should conform to the specifications required for example battlefield 2, however, these games does not work and I didn't know why. I then realized that all the games I tried were all on 4 DVD-ROM drive demanding x, and the specifications I provided with my laptop did not specify what kind of DVD player, I had another super multi layer or something.

    It is while I tried the games that were demanding CD-ROM which all worked fine, I then tried a game that was 2 x DVD ROM demanding that worked apart from a small problem with models of characters not displayed, so I took back defective. Then I tried a 1 x DVD-ROM game that worked perfectly.

    Today, I decided to get my DVD specifications, where I found that my laptop should read 8 x DVD - ROM drives.
    So my question is, is my defective DVD player for not playing more than 1 x DVD - ROM games? And can I contact Toshiba or my provider for repair or replacement or my problem would be something else?

    Thank you, Josh

    Hello

    As far as I know the laptop was delivered with the drive UJ - 841S and the drive supports 8 x DVD-ROM.
    Of course, there must be something wrong if the drive cannot read DVD-ROM media at full speed. The middle is not supported or the drive malfunctions

    What you can do is search for the update of the firmware. Many laptops come with the same drive. See the categories of driver and, possibly, there is a new update of the firmware.

    You can also try to remove the physical drive from the laptop and reboot the device without the drive. Then turn off the appliance, install the drive again and the boot upward.
    The laptop must initialize the firmware again and maybe this will help

    But it seems you notebook is not very old and the warranty is valid. If you need to contact the ASP in your country for more details and possibly for disc replacement

  • Equium A100-147: large screen display resolution is not available?

    Hi, I recently bought a laptop A100-147 - accepted a view model that I had trouble getting one of them. On the beautiful screen, the screen resolution is 1024 x 768 - that it and 640 x 480 and 800 x 600 are available. This sounds awfully stretched.

    Is this correct? Or do I have to create a different graphics driver that allows me to select a screen resolution?

    Thank you.

    Hello

    According to the description of the Equium A100-147 comes with color Wide XGA TFT 15.4 TruBrite display ". The standard resolution of this monitor is 1280 x 800. If you dot have this one please install graphic driver. You can find it on the download page of Toshiba under http://eu.computers.toshiba-europe.com support & downloads.

    I can't imagine that it happens after the first start. You have preinstalled your own operating system?

  • Possible replacement of Equium A100 - 147 HDD 250 GB?

    Hello

    I own an Equium A100-147 with 60 GB HARD drive. I have a recovery disc and have restored the laptop several times.

    I am considering an upgrade to 250 GB HARD drive.

    Couple of questions...

    The motherboard will host a 250 GB drive?

    If I replace the HARD drive recover CD will install a new copy of the fatory software you (inc windows xp MCE)?

    Any advice would be welcome.

    Yes, you can use a 250 GB. The laptop has a SATA interface and there is no limit as to IDE.

    If you use the recovery CD, you will get to factory settings. This means an XP installation with all the drivers and tools.

  • Equium A100-147: can I use external monitor with 1920 x 1200 output

    Hello

    I have an equium A100-147, anyone know if its possible to use my external lcd as office extended to its native resolution of 1920 x 1200, I want to use it for photo editing.

    None of these options to external display currently on the graphics card drivers provide a decent game with the external monitor.

    How can I make it fit on the screen without stretch or compress images with a decent resolution?

    Hi Mae

    As you probably know the resolution you want to use depends on the installed graphics driver.
    If the graph does not contain the 1920 x 1200 resolution you will not be able to use it.

    But maybe after a small modification of the graphics driver you will be able to choose such an external resolution.

    Please visit this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

    Maybe the procedure described by Jogi might help.

  • Equium A100-147: I get an error during the recovery procedure

    Hi again,

    I had trouble with my equium a100-147.
    I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

    I tried the new recovery disk and am now errors when I boot the disk.

    error is

    "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

    any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

    Thank you

    Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
    It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
    Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

    -fixboot
    -fixmbr
    -bootcfg /rebuild
    -chkdsk /r

    If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
    Once this procedure tries to start again on the new recovery CD!

    Good bye

Maybe you are looking for

  • Why Mozilla does not solve the problem of Yahoo - it is a problem of piracy?

    Dozens of people have complained strongly Yahoo joining Firefox and masking himself, so it cannot be deleted. This happened at least a month. Why Mozilla doesn't something to prevent HACKING in Firefox Yahoo. ? It is an obvious attempt to pre-emption

  • before buying question: automatically print all of my emails, possible?

    Hello, I need a printer that automatically prints all of my emails, without a pc. Can I use the eprint for this function? the goal is that every visitor to my website can send a mail contact, and I need an automatic of all that of the mails print. If

  • PCHNotify.exe error code

    When I start windows I get a window with the error message "pchnotify.exe has encountered a problem and needs to close.  We are sorry for the inconvenience. "I click ok and it goes away. But how do I get rid of this error window that occurs whenever

  • Failed to backup my drive (C :) for DVD + r

    Whenever I try to backup my drive HP (c) on DVD + R (16 x 4.7 GB) I get the following window; "Back to the top has not completed [by reason] a device i/o error. (0x8007045D). My system features: (64-bit) of Windows Vista Home Premium, HP What I tried

  • Automate to stop a task

    I was asked to create an event/job that will stop/cancel a working stroke. did anyone have an example how to automate to stop a task? Please notify. Thank youWarren