Cannot install driver for GTX 650 Ti on HP Pavilion p7 - 1187c

Greetings,

I have a HP Pavilion p7 - 1187c with integrated graphics (DX 10.1) on a card mother IPISB-CU (Carmel 2). I improved the diet of a Corsair 550 (no problem) and then installed a Gigabyte GEFORCE GTX 650 graphics card ti. The map to be able to judge by the fact that the fan rotates.

When I tried to install the driver on the CD provided by Gigabyte, I immediately get the message: this graphics driver not found hardware graphic compatible so was not able to install. "I'm a computer novice so this message means nothing to me. Any help as to what should be the next step would be greatly appreciated. Is it possible that my motherboard will not simply allow for a separate graphics card?

I needed to update the graphics card to be able to run 10 X-Plane.

Thanks again for any help.

Leon

Hi Leon,

NVIDIA 650 TI requires a power supply via the PCI-E power connector 6 pin to fully turn on.  If the card is not fully turns on then the bios will not see the map and so the OS will not see the map.

Map of TI 650 is 110 + watts and the without the PCI-E power connector 6 pin he won't be enough power to power the card from the PCI-E slot.  See the image to the location attached below the PCI-E power connector 6-pin.

Tags: HP Desktops

Similar Questions

  • Cannot install driver for hp pavilion dv4-2045dx cd player

    Computer: HP Pavilion dv4 2045dx using Windows 7 (64-bit)

    I currently have problems with my computer's CD drive.  He has been unable to read discs of any kind of music, DVDS and software programs for several months now.  The main problem seems to be with an inability to properly install the driver for the cd drive.

    When running "find and solve the problems" of section "Troubleshooting" in the Control Panel, I get an error message that says that there is a problem with the driver for the cd drive.  Whenever I try to install the driver, he is not able to do so and contact the manufacturer of your computer.  I also tried to download all the updates and I get essentially the same message.

    Also, here's all that I've done so far.  I followed all these steps, but the last two listed in the help or support of the site.  Here is the link I used:

    http://support.HP.com/us-en/document/c01897812

    I couldn't do a restore of the system in step 7, because the last date that I could find to a restore point has been today (or yesterday).  In addition, I couldn't do step 8.

    Any help would be greatly appreciated.

    Thank you

    Hello:

    See if ongoing automated microsoft fix tool for you works.

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

    If AutoCorrect does not work, try the manual fix in section "Let Me difficulty it myself, ' on the link below.

    Right to the title of this topic is a "click here to view the solution."

    http://support.Microsoft.com/kb/982116

  • Cannot install driver for printer Dell 964 on Windows Vista

    Separated from this thread.

    I have triedany help would be aapericated God bless America. several times to install the driver for a printer, dell 964 on this vista without success

    Hello

    Please make sure that you use the latest drivers from the Dell printer support website and you have checked for solutions on the support page for your printer:

    http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-964/research

    If you still can't find a solution, please ask in the forum Dell Pinters here:

    http://en.community.dell.com/support-forums/peripherals/f/3528 .

    If you do, make sure that you give complete information, including what is happening and the error messages in its entirety.

  • Cannot install driver for printer HP LJ M1120n MFP HP 6570b laptop with win7 64 bit

    Installation driver Plug & Play doesn't work - it can not find the proper drivers.

    If I try to install the latest HP driver for win7 64 bit (from the HP site), it stops during the instalation (windows program stops due to unknown issues).

    If I try to install the 32-bit version of the driver complete Solution from HP site, it let me to the HP install window. By clicking on the "Install" button, it stops saying "Setup is not supported on this operating system, or the system does not meet the minimum requirements...". »

    printer: HP LJ M1120n MFP

    laptop: HP 6570b

    OS: windows 7 64-bit, selected, automatic driver update drivers on board cooler

    What to do next?

    I found no error in the event viewer, at least not a red icon.

    But I find the solution - in another forum thread. Here.

    1. I have connected the printer to get the error message,

    2. then downloaded and UNPACKED (no) LJM1120-COMPLETE-Solution driver installed (32-bit) here.

    3 went to Device Manager, find the printer,

    4. right click to get the link submenu "Update driver."

    5 choose the unzipped directory driver and let it update driver from there.

    Printer solved.

    Then did the same thing to scan, points 3 to 5.

  • Cannot install driver for Canon selphy cp720 on Windows 8

    Cannot install the driver on windows 8

    I was indeed able to correctly install the driver Windows 7 on Windows 8.1 (x 64). I downloaded the V4.0 - German pilot (since it's my native language) page of Canon and used Compatibility Settings (Windows 7 + admin) Support and the executable installed the driver without worries. After the Installation of the printer showed normally and I am able to print photos using Version 8.1 Windows of the guns 'ImageBrowser Ex' (which I installed in front, requiring "Run as Administrator" too, otherwise indicating a failure during install).

  • Cannot install driver for Epson V330 photo scanner on W7/64.

    I downloaded the (Scan 13870 Manager) driver of Epson - it should be recommended for W7/64, but installation is interrupted (code 28). Can anyone help?

    See this:

    Fixed error code 28
    http://pcsupport.about.com/od/findbyerrormessage/a/code-28-error.htm

    You can contact Epson support as well.

  • Cannot install driver for HP DESKJET 3050 a j611 all-in-one using windows 7

    Stagnate in the printer, but can not find a driver. Have tried to set as the default printer, but right click I only get CREATE-HELP-DELETE SHORTCUT-PROPERTIES of the DEVICE can someone help as HP are useless

    You don't install it correctly, but just pluged in there.

    It must have taken all of 10 seconds to locate your model on the site of HP

    You install using the cd of HP, or the full functionality of the HP site download and does not connect until the installation says to

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=5061092

  • HP Photosmart Premium C309 g: cannot install driver for C309 g on Windows 7 (64)

    After the download and launch the program, he "extracted" to 100%, then disappears.  The installer has simply never opens a dialogue window.  He continues to run forever.   Does anyone have a solution to this problem?

    I tried to clean up the registry by using the WinThruster and the Windows Fix - it, application software, but failed.

    Her pinter works well from other devices that are connected to the same network.

    I spend 2 days on this issue and, therefore, your help and support will be much appreciated!

    Best regards, Jan

    Hi @OpaJan

    Follow the steps below and check if it solves the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7 restart your PC
    8. run the installation file and check all difference.
    9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

    If the steps above does not help to solve the problem, open the Device Manager and devote the processor category, if you have an AMD processor trying to install the patch below:
    http://ftp.HP.com/pub/softlib/software12/COL40390/OJ-98352-1/HPAMDC50PATCH.exe

    Kind regards
    Shlomi

  • Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

    Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • PLEASE I NEED DRIVER FOR HP 650 PCI (B6840EA)

    PLEASE I NEED DRIVER FOR HP 650 PCI (B6840EA)

    Thank OU, I solved the problem

    ERICO wrote:

    You need a driver PCI for which the component and OS?

    Are you sure that it is a laptop? When I search the references for the 650 HP come with desktop PC information. Laptops don't use PCI interfaces for external upgrades.

    is the product number has been woing 'b6m40ea '.

  • How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

    How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

    XP drivers for XP, NOT of Windows 7...

    Go to control panel > devices and printers > click on "add a printer".

    The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

    A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

    Click on 'NEXT' and follow the installation instructions...

  • I do not have CD instalation driver for Panasonic NV-GS1B; HOW CAN I BUY IT?

    I don't have CD instalation driver for digital camcorder Panasonic NV-GS1B; HOW CAN I BUY IT OR DOWNLOAD?

    Hello

    You can contact Panasonic for help.

    Here is the link:

    http://shop.Panasonic.com/search/?support=y&q=Panasonic%20nv-gs1b

    I hope that helps!

    Any questions about Windows always post on the Community Forums of Microsoft.

  • Cannot install driver Windows XP Home edition for WLAN card on my Satellite A200 - 14 d

    I have a problem with the driver for win xp wireless
    I installed win xp and the only problem is the wireless lan driver
    Help me please

    Hello

    Please visit http://aps2.toshiba-tro.de/wlan/ and you can find all the drivers of real WLAN card.

    Good bye

  • Satellite A210-171 - cannot install WLAN for Windows Vista driver

    I downloaded a driver for vista Realtek Semiconductor Corporation wireless lan.
    When I go to install the driver, I get the error message "this operating system is not supported".

    My system below details

    Toshiba Satellite A210-171
    Model number: PSAFJE
    Operating system: Vista Home Prem

    I downloaded the driver from the website of UK.

    Could someone help me please in installation or help resolve the problems I'm having
    See you soon

    Hello Shadow

    Maybe a stupid question, but I would like to know why you need to install driver WLAN. As far as I know your laptop comes with Vista Home Premium. The recovery image (factory settings) contains the right WLAN driver.
    You have lost the feature or what?
    Are you still using an original preinstalled OS or you try ti install your own operating system?

  • Cannot install driver Vista Ati for Satellite A100-169 (PSAA9E)

    Hi all I have problems to install the Ati 8.31.100.3.2WHQL drivers - 061124 has 2-039454C.
    The problem is I can not install the driver, Catalist Control Center is Ok, there is also no Chance
    to get it running by Device Manager "...\display\Packages\Drivers\Display\LH_INF\CL_39 454.inf".
    the error message "can't open the device!
    Here is the Log of the installer:

    Catalyst® - Installationsmanager
    Installationsbericht
    Wednesday, June 6, 2007 19:26:03

    Hardwareinfo
    Name of the ATI Mobility Radeon X 1400 graphics card
    Manufacturer ATI Technologies Inc.
    Geräte-ID 0 x 7145
    Offerers-ID 0 x 1002
    Klassen-Code 0 x 030000
    Revisions-ID 0x00
    ID subsystem 0xff10
    Subsystem-offerer-ID 0 x 1179
    Andere Hardware

    Aufenthaltsraume.man PaketeATI catalyst install Manager
    Catalyst Control Center
    Microsoft Visual C++ 2005 Redistributable 32bits

    As Installation packages
    ATI Catalyst Install Managerendgultiger status:
    Version of items: 3.0.624.0
    Size: 20 MB
    ATI-Bildschirmtreiberendgultiger status: failed
    Version of items: 8.31.100.32
    Size: 90 MB
    North Bridge filter-Treiberendgultiger status: success
    Version of items: 1.00.0000.1
    FAT: 1 MB
    Catalyst Centerendgultiger status:
    Version of items: 2.0.2519.38216
    FAT: 150 MB
    Microsoft Visual C++ 2005 Redistributable 32bitendgultiger status:
    Version of items: 7.3.0.0
    Size: 10 MB

    Andere jobs Geräte

    Fehlermeldungen
    Treiberinstallation: die Installation ist fehlgeschlagen
    Anwendungsinstallation: Fehlgeschlagen

    I hope someone can help me with this, Google has not been good for me
    Thank you

    Hello

    I wonder why you were able to install the Catalyst Control Center and not the INF ;)
    Hmmm in my opinion, the driver is ok, but the installation failed!

    You have unpacked all the files correctly ;)
    In the first step, I would recommend uninstalling the software graphical overview.
    After restarting again, you can try to reinstall again!

    By the way; AFAIK the A100-169 has been delivered with the graphic driver for ATI MOBILITY RADEON X 1600. I wonder why the information about the hardware reports the name ATI Mobility Radeon X 1400

Maybe you are looking for