Cannot install driver for HP DESKJET 3050 a j611 all-in-one using windows 7
Stagnate in the printer, but can not find a driver. Have tried to set as the default printer, but right click I only get CREATE-HELP-DELETE SHORTCUT-PROPERTIES of the DEVICE can someone help as HP are useless
You don't install it correctly, but just pluged in there.
It must have taken all of 10 seconds to locate your model on the site of HP
You install using the cd of HP, or the full functionality of the HP site download and does not connect until the installation says to
My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »
I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.
Welcome to the Forums of HP Support!
I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:
- Turn the printer off:
- While the printer is turned off, disconnect the power cable from the back of the router for a minute.
- When the lights come back on the router, turn on the printer.
- Disable any antivirus, firewall or security of your Mac software.
- Try to run the installer.
Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
I got Hp Deskjet 3050 a j611 all-in-one series on my windows 7, I've upgraded to Windows 8 and my printer did not work properly so I uninstalled so I could reinstall it, but it will not install because it says that it is not compatible. is it possible that I can make this printer work using Windows 8?
I guess you are trying to reinstall with the CD supplied with the printer. Click on the link below to access the download page for the driver for Windows 8 for the Deskjet 3050 a J611.
I hope this helps.
After that I updated / downloaded 10 Windows on my laptop, I can't connect to my printer. It is even not appear as option in Windows, even though I made an UPDATE of Windows looking for my HP. How can I download a new driver? A new driver is available for my PRINTER HP DESKJET 3050 ALL-IN-ONE J611 SERIES a? Please don't tell me I have to buy a new printer...
Download the driver from the printer Support page:
Computer: HP Pavilion dv4 2045dx using Windows 7 (64-bit)
I currently have problems with my computer's CD drive. He has been unable to read discs of any kind of music, DVDS and software programs for several months now. The main problem seems to be with an inability to properly install the driver for the cd drive.
When running "find and solve the problems" of section "Troubleshooting" in the Control Panel, I get an error message that says that there is a problem with the driver for the cd drive. Whenever I try to install the driver, he is not able to do so and contact the manufacturer of your computer. I also tried to download all the updates and I get essentially the same message.
Also, here's all that I've done so far. I followed all these steps, but the last two listed in the help or support of the site. Here is the link I used:
I couldn't do a restore of the system in step 7, because the last date that I could find to a restore point has been today (or yesterday). In addition, I couldn't do step 8.
Any help would be greatly appreciated.
See if ongoing automated microsoft fix tool for you works.
If AutoCorrect does not work, try the manual fix in section "Let Me difficulty it myself, ' on the link below.
Right to the title of this topic is a "click here to view the solution."
Separated from this thread.
I have triedany help would be aapericated God bless America. several times to install the driver for a printer, dell 964 on this vista without success
Please make sure that you use the latest drivers from the Dell printer support website and you have checked for solutions on the support page for your printer:
If you still can't find a solution, please ask in the forum Dell Pinters here:
If you do, make sure that you give complete information, including what is happening and the error messages in its entirety.
Installation driver Plug & Play doesn't work - it can not find the proper drivers.
If I try to install the latest HP driver for win7 64 bit (from the HP site), it stops during the instalation (windows program stops due to unknown issues).
If I try to install the 32-bit version of the driver complete Solution from HP site, it let me to the HP install window. By clicking on the "Install" button, it stops saying "Setup is not supported on this operating system, or the system does not meet the minimum requirements...". »
printer: HP LJ M1120n MFP
laptop: HP 6570b
OS: windows 7 64-bit, selected, automatic driver update drivers on board cooler
What to do next?
I found no error in the event viewer, at least not a red icon.
But I find the solution - in another forum thread. Here.
1. I have connected the printer to get the error message,
2. then downloaded and UNPACKED (no) LJM1120-COMPLETE-Solution driver installed (32-bit) here.
3 went to Device Manager, find the printer,
4. right click to get the link submenu "Update driver."
5 choose the unzipped directory driver and let it update driver from there.
Then did the same thing to scan, points 3 to 5.
Cannot install the driver on windows 8
I was indeed able to correctly install the driver Windows 7 on Windows 8.1 (x 64). I downloaded the V4.0 - German pilot (since it's my native language) page of Canon and used Compatibility Settings (Windows 7 + admin) Support and the executable installed the driver without worries. After the Installation of the printer showed normally and I am able to print photos using Version 8.1 Windows of the guns 'ImageBrowser Ex' (which I installed in front, requiring "Run as Administrator" too, otherwise indicating a failure during install).
I have seen this problem posted a few more times, it seems that it is recurring.
I reinstalled Win7 on my machine. I try to reinstall the driver and software for my all in one. I get ' HP is compile your results. " It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. ' message for more than 10 minutes now with only the busy indicator. I tried this on Chrome and IE with the same results. Help. I need my scanner.
The pilot site is always questions, but you can download the driver Windows 7 x 64 for the HP Deskjet 3050 a directly from the link here:
I have an old HP Officejet Pro L7650 all in one and due to new software that I use for my small business, I was told that I must download PCL6/drivers for my printer to work with the new software correctly. I searched and found the right driver online and downloaded, however, during installation to choose the machine and it lists just about everyone but the machines HP Officejet Pro L7650. I was wondering if anyone has an idea or knows a PCL 6 driver that will work for my particular all in one machine. Any help is appreciated. The driver I downloaded was the HP Universal print for 64-bit systems driver specifically (upd-pcl6 - x 64 - 22.214.171.12449). Thank you.
According to the specifications of the charges (see http://support.hp.com/gb-en/document/c00839084 ) and in common with many (but not all) peripheral inket printers OfficeJet L7650 use the Language of Description of Page PCL3 Enhanced - they do not support PCL5 or PCL6.
How can I download and install the remote HP all-in-One Printer software without going through the MS Store? He wants to put me in place and MS Account and put all my files, etc. on a site not on my computer. I don't want to do that.
Hello! I recently had a new hard drive installed on my Samsung laptop year-and-a-half-year-old, as well as 10 (64-bit) Windows as well. Instead of using the original installation disc for my printer range all-in-one HP psc1350 (bought 1/2004), I have used your site and just did a download tonight HPPIW. EXE . My question is: I do not see the original HP Director on the desktop now after the above file download. The copying, printing, scanning are all working well, if that's fine! So all the "Director" now wonder, if I can get in a way that - since the original my installation disc or HP support Web site? Thank you, CR-Issquah (26/08/2015, 21:00 - PT)
HP Director has been supported only for your printer up to Windows XP, since Windows Vista full features software is no longer available for your printer, and there is no HP Director application or provided HP solutions Center.
You can follow the following document which lists no available workaround solution and the limitation of the provided solution:
I have a HP Pavilion p7 - 1187c with integrated graphics (DX 10.1) on a card mother IPISB-CU (Carmel 2). I improved the diet of a Corsair 550 (no problem) and then installed a Gigabyte GEFORCE GTX 650 graphics card ti. The map to be able to judge by the fact that the fan rotates.
When I tried to install the driver on the CD provided by Gigabyte, I immediately get the message: this graphics driver not found hardware graphic compatible so was not able to install. "I'm a computer novice so this message means nothing to me. Any help as to what should be the next step would be greatly appreciated. Is it possible that my motherboard will not simply allow for a separate graphics card?
I needed to update the graphics card to be able to run 10 X-Plane.
Thanks again for any help.
NVIDIA 650 TI requires a power supply via the PCI-E power connector 6 pin to fully turn on. If the card is not fully turns on then the bios will not see the map and so the OS will not see the map.
Map of TI 650 is 110 + watts and the without the PCI-E power connector 6 pin he won't be enough power to power the card from the PCI-E slot. See the image to the location attached below the PCI-E power connector 6-pin.
I downloaded the (Scan 13870 Manager) driver of Epson - it should be recommended for W7/64, but installation is interrupted (code 28). Can anyone help?
Fixed error code 28
You can contact Epson support as well.
After the download and launch the program, he "extracted" to 100%, then disappears. The installer has simply never opens a dialogue window. He continues to run forever. Does anyone have a solution to this problem?
I tried to clean up the registry by using the WinThruster and the Windows Fix - it, application software, but failed.
Her pinter works well from other devices that are connected to the same network.
I spend 2 days on this issue and, therefore, your help and support will be much appreciated!
Best regards, Jan
Follow the steps below and check if it solves the problem:
1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
7 restart your PC
8. run the installation file and check all difference.
9. Once you have finished, remember to open McAfee and re-enable real-time scanning.
If the steps above does not help to solve the problem, open the Device Manager and devote the processor category, if you have an AMD processor trying to install the patch below:
Maybe you are looking for
Hi, I need to run applications in 256 colors in 32-bit of Windows Vista. Right click and check in the properties to 256 colors do not work. Ati Mobility Radeon HD2600 properties, we can only choose between 16-bit color or 32-bit. You can support me a
I have a HP ENVY 5530 bought 6 months ago. It works fine up to last week. When I try to print photos on paper glossy A4-180gsm printing process seems to start until the paper has been fed properly - resulting in one third of the image is not being pr
I am trying to open Windows Defender (I have Windows Vista). I get an error message: 0 x 80070424. When I try to download a new version, I can't. I get the message "Vista already has this program. I'm trying to fix the slow performance of my comp
Computer HP Pavilion laptop says: Smart Check: spent Long DST: failure Failure ID: MCSB64-7037AF-MFPWWK-61F103 PRODUCT ID: EOJ75UA #ABA HARD DRIVE 1 Help, please. Thank you.
Hello I used to have a Z10 and mix installed on my MacBook Air and it worked very well. Since then, I got rid of the Z10 and acquired a Z30. I also had uninstlled blend in the meantime. When I reinstalled and put in place linking the Z30, it still li