Cannot install driver for printer HP LJ M1120n MFP HP 6570b laptop with win7 64 bit

Installation driver Plug & Play doesn't work - it can not find the proper drivers.

If I try to install the latest HP driver for win7 64 bit (from the HP site), it stops during the instalation (windows program stops due to unknown issues).

If I try to install the 32-bit version of the driver complete Solution from HP site, it let me to the HP install window. By clicking on the "Install" button, it stops saying "Setup is not supported on this operating system, or the system does not meet the minimum requirements...". »

printer: HP LJ M1120n MFP

laptop: HP 6570b

OS: windows 7 64-bit, selected, automatic driver update drivers on board cooler

What to do next?

Advertisement

I found no error in the event viewer, at least not a red icon.

But I find the solution - in another forum thread. Here.

1. I have connected the printer to get the error message,

2. then downloaded and UNPACKED (no) LJM1120-COMPLETE-Solution driver installed (32-bit) here.

3 went to Device Manager, find the printer,

4. right click to get the link submenu "Update driver."

5 choose the unzipped directory driver and let it update driver from there.

Printer solved.

Then did the same thing to scan, points 3 to 5.

Tags: HP Printers

Similar Questions

  • Cannot install driver for printer Dell 964 on Windows Vista

    Separated from this thread.

    I have triedany help would be aapericated God bless America. several times to install the driver for a printer, dell 964 on this vista without success

    Hello

    Please make sure that you use the latest drivers from the Dell printer support website and you have checked for solutions on the support page for your printer:

    http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-964/research

    If you still can't find a solution, please ask in the forum Dell Pinters here:

    http://en.community.dell.com/support-forums/peripherals/f/3528 .

    If you do, make sure that you give complete information, including what is happening and the error messages in its entirety.

  • HP Laserjet MFP M127fn Pro: Cannot install drivers for printer HP Laserjet Pro MFP computer M127fn on the new laptop from acer windows 10

    This is my third attempt failed to install new drivers for the Laserjet Pro M127fn MFP printer on my laptop Acer windows 10 OEM. I used the HP installer with no customiztion of components (the default recommended) with USB cable connection. It goes up to the product configuration step 99% and then gives the error: "an installation operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run Setup again. If the problem persists please consult product suppprt web site of your product... » »

    I also tried to use interface devices and printers after restart the computer by selecting Add Printer option, it seemed to have installed the printer but it couldn't print the test page. Any help will be greatly appreciated.

    Thank you.

    Hello

    Printer navigate through the Setup menu using the left and right arrows and locate the Service menu.

    Search for HP Smart Install option in the Service menu (it may appear and may not be no depanding on the version of your printer), if it is there, select Disable for HP Scmart Install.

    In your PC click on the right button on the start menu and select Control Panel, then select View devices and printers.

    Do not forget to remove any icon (the M127 or any other driver HP) HP printer by clicking the icon and selecting Remove the device, and then restart the computer.

    Go back to the devices and printers any queue remains left by clicking once, then select press the print server properties in the top menu bar.

    Select any listed HP printer driver and select Remove, make sure to select the 2nd option to delete the printer and its driver package.

    From the control panel home, type "change device Installation settings and open the option, then select No and confirm with OK."

    Now, try to reinstall the most recent drivers and check for the difference.

  • where can I download PCI device Acer laptop with win7 64 bit driver

    where can I download PCI device Acer laptop with win7 64 bit driver

    Information on what you need the driver can be useful, but--
    All the drivers for your card mother books must be downloaded from the Acer site.
    These should include drivers for the cards that use a PCI slot. If not then you would
    Download the drivers from the mfg of the connected to the PCI slot expansion card.
    .

  • Cannot install driver for Canon selphy cp720 on Windows 8

    Cannot install the driver on windows 8

    I was indeed able to correctly install the driver Windows 7 on Windows 8.1 (x 64). I downloaded the V4.0 - German pilot (since it's my native language) page of Canon and used Compatibility Settings (Windows 7 + admin) Support and the executable installed the driver without worries. After the Installation of the printer showed normally and I am able to print photos using Version 8.1 Windows of the guns 'ImageBrowser Ex' (which I installed in front, requiring "Run as Administrator" too, otherwise indicating a failure during install).

  • Cannot install driver for hp pavilion dv4-2045dx cd player

    Computer: HP Pavilion dv4 2045dx using Windows 7 (64-bit)

    I currently have problems with my computer's CD drive.  He has been unable to read discs of any kind of music, DVDS and software programs for several months now.  The main problem seems to be with an inability to properly install the driver for the cd drive.

    When running "find and solve the problems" of section "Troubleshooting" in the Control Panel, I get an error message that says that there is a problem with the driver for the cd drive.  Whenever I try to install the driver, he is not able to do so and contact the manufacturer of your computer.  I also tried to download all the updates and I get essentially the same message.

    Also, here's all that I've done so far.  I followed all these steps, but the last two listed in the help or support of the site.  Here is the link I used:

    http://support.HP.com/us-en/document/c01897812

    I couldn't do a restore of the system in step 7, because the last date that I could find to a restore point has been today (or yesterday).  In addition, I couldn't do step 8.

    Any help would be greatly appreciated.

    Thank you

    Hello:

    See if ongoing automated microsoft fix tool for you works.

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

    If AutoCorrect does not work, try the manual fix in section "Let Me difficulty it myself, ' on the link below.

    Right to the title of this topic is a "click here to view the solution."

    http://support.Microsoft.com/kb/982116

  • Cannot connect driver for printer hp 5520 via USB

    Hi, I'm having a lot of trouble trying to get my printer to 5520 hp set up via USB

    Although all my software is installed I get the pront is not connected via USB

    Hello

    Thanks for posting your query in Microsoft Community Forum.

    1. Did you ever connect the printer via the front USB port? If Yes, you did it any significant hardware or change software on the computer before this problem?
    2. What is the exact error message, when you say,' no pront connected?
    3. Are you able to connect to any other computer-compatible USB media?

    The question may arise if the parameters are enabled by the packet printer driver are misconfigured or if there are problem specific to the USB port only. So, I would suggest trying the following steps and check if the problem persists.

    Method 1:

    Refer following link to launch the utility of troubleshooting to diagnose & difficulty printer related issues:

    Diagnose and problems printing and printer

    In addition, refer to this link: Open the printer Troubleshooter

    Method 2:

    Uninstall and reinstall the printer driver from the printer manufacturer's Web site.

    Step 1: Uninstall the driver from Device Manager

    • Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    • In the list of hardware categories, find and expand the CD-ROM/DVD-ROM drives and do a right-click on the device driver and then click Uninstall.
    • Restart your computer.

    Step 2: Download and install the driver from the printer manufacturer's Web site

    See the following link, download and install the full package of the printer driver.

    Printer support e-all-in-one Photosmart HP 5520

    In addition, see the following articles:

    Find and install printer drivers in Windows 7
    Install a printer

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Cannot install driver for GTX 650 Ti on HP Pavilion p7 - 1187c

    Greetings,

    I have a HP Pavilion p7 - 1187c with integrated graphics (DX 10.1) on a card mother IPISB-CU (Carmel 2). I improved the diet of a Corsair 550 (no problem) and then installed a Gigabyte GEFORCE GTX 650 graphics card ti. The map to be able to judge by the fact that the fan rotates.

    When I tried to install the driver on the CD provided by Gigabyte, I immediately get the message: this graphics driver not found hardware graphic compatible so was not able to install. "I'm a computer novice so this message means nothing to me. Any help as to what should be the next step would be greatly appreciated. Is it possible that my motherboard will not simply allow for a separate graphics card?

    I needed to update the graphics card to be able to run 10 X-Plane.

    Thanks again for any help.

    Leon

    Hi Leon,

    NVIDIA 650 TI requires a power supply via the PCI-E power connector 6 pin to fully turn on.  If the card is not fully turns on then the bios will not see the map and so the OS will not see the map.

    Map of TI 650 is 110 + watts and the without the PCI-E power connector 6 pin he won't be enough power to power the card from the PCI-E slot.  See the image to the location attached below the PCI-E power connector 6-pin.

  • Cannot install driver for HP DESKJET 3050 a j611 all-in-one using windows 7

    Stagnate in the printer, but can not find a driver. Have tried to set as the default printer, but right click I only get CREATE-HELP-DELETE SHORTCUT-PROPERTIES of the DEVICE can someone help as HP are useless

    You don't install it correctly, but just pluged in there.

    It must have taken all of 10 seconds to locate your model on the site of HP

    You install using the cd of HP, or the full functionality of the HP site download and does not connect until the installation says to

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=5061092

  • Cannot install driver for Epson V330 photo scanner on W7/64.

    I downloaded the (Scan 13870 Manager) driver of Epson - it should be recommended for W7/64, but installation is interrupted (code 28). Can anyone help?

    See this:

    Fixed error code 28
    http://pcsupport.about.com/od/findbyerrormessage/a/code-28-error.htm

    You can contact Epson support as well.

  • HP Photosmart Premium C309 g: cannot install driver for C309 g on Windows 7 (64)

    After the download and launch the program, he "extracted" to 100%, then disappears.  The installer has simply never opens a dialogue window.  He continues to run forever.   Does anyone have a solution to this problem?

    I tried to clean up the registry by using the WinThruster and the Windows Fix - it, application software, but failed.

    Her pinter works well from other devices that are connected to the same network.

    I spend 2 days on this issue and, therefore, your help and support will be much appreciated!

    Best regards, Jan

    Hi @OpaJan

    Follow the steps below and check if it solves the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7 restart your PC
    8. run the installation file and check all difference.
    9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

    If the steps above does not help to solve the problem, open the Device Manager and devote the processor category, if you have an AMD processor trying to install the patch below:
    http://ftp.HP.com/pub/softlib/software12/COL40390/OJ-98352-1/HPAMDC50PATCH.exe

    Kind regards
    Shlomi

  • I ca't install drivers for printer hp laserjet 1213nf mfp

    in my computer hp laptop, which is preloaded with windows 10... I even tried together last updated driver on the hp support site... If anyone can solve this, you can... ? ... I need help from anyone... its saying check if cable connected correctly... but his pass properly on other systems with windows 7 and 8.1.

    Welcome @S_naveen,

    Thank you for your participation in the forums! I see that you have problems installing the printer software and you tried latest drivers with the same results. I'd love to help you.

    This can also occur when the printer is already recognized as the USB connection and windows does not yet detect.

    Remove the USB cable plugged in, remove the printer in the devices and printers (if the list) and the Device Manager.

    To access the Device Manager:

    Press the windows key and press X on the keyboard at the same time on the desktop.

    Then click on Device Manager in the list.

    Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with a yellow exclamation point or an unknown device. Right click and uninstall the device.

    Let me know if and how the printer was listed.

    Then reconnect the USB cable and it must be detectable again.

    If you're still having problems, unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation.

    Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped. Please let me know the results. Best regards

  • Satellite A210-171 - cannot install WLAN for Windows Vista driver

    I downloaded a driver for vista Realtek Semiconductor Corporation wireless lan.
    When I go to install the driver, I get the error message "this operating system is not supported".

    My system below details

    Toshiba Satellite A210-171
    Model number: PSAFJE
    Operating system: Vista Home Prem

    I downloaded the driver from the website of UK.

    Could someone help me please in installation or help resolve the problems I'm having
    See you soon

    Hello Shadow

    Maybe a stupid question, but I would like to know why you need to install driver WLAN. As far as I know your laptop comes with Vista Home Premium. The recovery image (factory settings) contains the right WLAN driver.
    You have lost the feature or what?
    Are you still using an original preinstalled OS or you try ti install your own operating system?

  • In need of a driver for printer Lexmark 810

    Original TitleL: printer not work

    looking for a driver for printer lexmark 810 series

    The latest drivers Lexmark has are for Vista.

    Drivers Lexmark 810:
    http://support.Lexmark.com/index?page=productSelection

    If you have Windows 7:

    If the manufacturers website has no drivers for Windows 7, try to use Windows Update to install the printer drivers:

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  • How can I get a driver for printer Canon I455 (my windows vista 32)

    How can I get a driver for printer Canon I455 (my windows vista 32)

    You can get this support from Canon... If they chose to take over the device in the given operating system.

    Looking at the Website of Canon's Support for this printer and select your operating system, they * sentence * support with your particular operating system.

    "This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module. »

    So, basically install you by choosing to look on the Microsoft Update site when you try to install the driver.  It will download one Cannon gave to Microsoft after the release of Windows Vista.  Then, you restart and download the other file (on-site support) to give you more features.

Maybe you are looking for