Cannot install drivers LAN and Wireless Lan on my Satego P100-10U

Similar Questions

• Tecra M2 - cannot install drivers Intel/PRO Wireless 2100

  I have a Toshiba Tecra M2. Drivers Toshiba page for my model lists an update driver for this PC as follows:

  Driver Lan Wireless 19/12/05
  Intel Windows XP 9.0.2.31 World Wide

  I don't seem to be able to install it, even though I have an Intel/PRO Wireless 2100 in the portable - setup just point out that it is not compatible driver or a device installed. The previous update of the driver:

  02/12/04 Wireless Lan Driver
  Intel Windows XP 1.6.0.47.W2 World Wide

  reported as installed OK and Device Manager reports 1.6.0.47 as the installed driver.

  I understood that the version 9 drivers are more stable but not the driver version 9 applies to my laptop?

  Hello

  If you check the driver information, I think that you will not know why it does not work. I have the same WLAN card on my Tecra M1 and our cards support the standard 802. 11, a / b. The driver that you want to have is for cards supporting the 802.11 standard, a / g, g.

  I tried to install it on my Tecra but the same result.

  Don t worry that everything is OK. If you buy a new Intel 2200 g card you can use.

  Good bye

• Re: Satellite L850-1V6 - cannot install drivers WIFI and BT

  I bought toshiba satellite L850-1V6 and I have problem with installing wirelles and bluetooth drivers, all drivers are working. Wirelles and bluetooth driver I can install on and then wirelles doesn t work.

  What operating system do you use?

• HP 15ac122tu with Free back: cannot install drivers wifi and diusplay drivers for HP 15ac122tu

  I went through the various positions and solutions. I am still unable to install display drivers and the network drivers (wifi) for my HP 15ac122tu. Help, please.

  FCC ID: TX2-RTL8723BE

  Display drivers are not available, don't install that provided on the Web site of this model. Although in the Device Manager it shows in the graphics card-> Mobile 5th generation Intel integrated graphics Core - 1616

  Hello:

  Try the graphics driver directly from Intel... a 3rd on the list.

  https://Downloadcenter.Intel.com/download/25484/Intel-graphics-driver-for-Windows-7-8-1-10-15-40-

  FCC ID: TX2-RTL8723BE:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

  Use the driver blutooth W7 from the support page.

• installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

  To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.

• Satellite A200-1 s 5 - cannot install driver LAN after installation of Windows 7

  I have a laptop Toshiba A200-1 s 5, serial number: X7357433K. I just installed Windows 7 and downloaded and installed all the drivers of Toshiba laptop. I have no problem device in the system information screen.

  In Device Manager, the cards I have that the "Intel (r) PRO/Wireless' network. When I install the downloaded driver for LAN (lan-20091103092515) it says "Realtek LAN Driver V7.003.0522.2009", but I can't not under network adapters - I don't know where he's going? I can't find everything Realtek device in Device Manager. Needles to say works Wireless LAN, LAN does not work.

  Connectivity doctor shows Wireless Lan, Dial-up Modem and Bluetooth, but no LAN. Trying to load the driver from Realtek - does not help. -message: the device does not work properly because Windows cannot load the drivers required for this device (Code 31)
  I even tried to install from Realtek and update the driver for lan-20091103092515 - same error Code 31.

  Hey Buddy,

  You have an unknown device in Device Manager? This could be the missing LAN card

  Also check if there are devices hidden in Device Manager. So open the Device Manager and go to view > show hidden devices.

  Normally, you should now see the LAN card and then you can update the driver.

  Check this box!

• Cannot install driver LAN on my Satellite C660

  I have a Satellite C660 - 1 x 4, PSC1NE. There only 3 months, I had a problem with the hard drive, the authorized service had replaced the hard drive and now I just reinstalled Windows 7 64 bit I saved all the correct drivers from the site on a memory stick and it is not the first time when I install the drivers same myself but now after returned to service Wireless LAN works fine but I can't install the driver of LAN.

  I don't really know what to do more...

  If I understand the new HARD drive, you have installed the version of Windows own and dot you want to use the original OS that you got with your laptop. Is this correct?

  You try to install this driver?

  What happen when you try to install the LAN driver?

• Cannot install driver LAN/WLAN on Satellite A100 - 289 PSAA9E Win XP

  Hello

  I installed Windows XP on a Satellite A100 - 289 PSAA9E, but I can not install the network and WLAN page driver drivers.
  I always get the message that no driver regrets were found (I manually chose the directory with the downloaded drivers)

  Can someone help me?
  Where can I get the right drivers network controller vor and WLAN card?

  Hello

  As much as I know Sam A100 PSAA9E series supports Intel 3945ABG wireless card and also an Intel LAN card.
  Driver WLAN can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  On the European driver Toshiba page I could find drivers for Satellite A100 PSAA9E series.
  But note; You must choose the Archive in the type of product because it old series.
  There are two different LAN drivers;
  -LAN driver v 9.2.24 for Ethernet Pro1000
  -LAN driver v 8.0.43.0 for Ethernet Pro100

  In order to check both!

• r20l5-nl: cannot install drivers on win7 64-bit wireless

  I donwgraded my laptop Windows 8.1 for windows 7 64 bit and now I can not install the drivers to use the wifi (that, according to hp site must be sp68506 and sp68427). When I opened to install they close and no installation is performed. I tried to install a large number of other drivers for laptop (also 43142 wireless lan broadcom adapter drivers, which should be my network card), but I can't not do wifi works.

  My material displayed for Realtek PCIe FE Family Controller ID is

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2337103C & REV_07

  I really hope that someone can help, because I don't really know what to do.

  Thanks in advance to all those who respond!

  You are the very welcome.

  Here are the links to the wireless and bluetooth drivers you need for this wireless card...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_143747_1&swEnvOid=4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_142906_1&swEnvOid=4058

• Cannot install driver LAN on Satellite M100-221

  I have reinstalled the OS on my Satellite M100 - 221 PSMA0E.

  HE has already used Windows XP Home Edition, and now I have installed Windows XP Professional SP2. I have an error in my DEVICE MANAGER with ethernet, mass storage controller, SM bus controller controller. But let's for ETHERNET CONTROLLER.
  I have download the real LAN driver on the official website of Toshiba, and whenever I try to install it I get the message "the specified location contains no information about your hardware.
  In the wizard NETWORK UPADATE I have same option to choose the Realtek driver, only Intel and a few others. My network card was working very well on XP Home edition preinstalled. What am I, I guess what to do? Help, please!

  Hello

  I guess you should try drivers intel instead of the realtek because drivers that your computer was shipped with a chipset Intel LAN.
  So, please visit the website of intel (www.intel.com) and download the latest drivers LAN from their homepage.

  It should work and you should soon have a working ethernet connection.

  Concerning

• T42 cannot install drivers Intel PROset for wireless 2915ABG card

  I have upgraded to the adapter a 2100ab to a 2915abg wireless, but have had accidents every time I install the Intel PROset software drivers v11.05.0 (7kwc50ww.exe). I can't use the card because of problems with S24EvMon during the installation of the drivers and associated software. After the attempts, each reboot is greeted with S24EvMon errors 0xc0000409 at the address 0x00454aa0. I have the good hotkey drivers installed (7avu43ww.exe) and (7zku02ww.exe) power management. If I install and try and run the dial-up connections after, it is said that there is something wrong with the installation of the driver. Help?

  Have you tried this set of drivers?

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-54956

  After downloading the package, be sure to extract the c > drivers > win > Wlanint

  Good luck and let us know.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• 15 - s103tx: cannot install drivers

  I just bought this computer of India about a week ago and I installed windows 7 ultimate on the same (64-bit). I downloaded all the drivers I could find on the HP website and tried to install each of them one by one. I still cannot install two drivers (like what they show in OTHER DEVICES in the DEVICE MANAGER)

  1 3D video controller

  2. universal Serial Bus (USB controller)

  Under the display adapters, I see Standard VGA graphics adapters. I tried to install the graphics drivers several times but always the same question.  I also tried to install the drivers USB 3.0 several times but always the same question as welI. I'd appreciate strongly any n all the necessary help on the same.

  Hello:

  See if it works...

  1 install the Intel chipset driver and restart.  The second file on the list is the file of execution (exe) auto.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng & ProdId = 816

  2. install the Intel HD graphics driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24348

  3. install the graphics driver nvidia and restart.

  http://www.nvidia.com/download/driverResults.aspx/81392/en-us

  Try this driver usb3...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22824 & lang = eng

• drivers audio and wireless for c738tu

  Hello. I recently had to install windows xp on my compaq pressario c738tu. now there is no audio data and the control panel says no audio devices installed. also my ethernet and wireless controller does not work. I downloaded the drivers for xp on the hp site, but of no use. Help, please.

  Message edited by swastikagrawal on 05/27/2009 07:39

  Hello

  Prior to Conexant Universal Audio Architecture (UAA) here
  
  Conexant High Definition Audio drivers here
  
  This will create a swsetup folder in c ("C:\swsetup\sp34200") drive
  Audio driver installation may cause an error. But continue with the following steps to get the audio driver installed correctly.
  Open the Device Manager:
  1. Click Start and select run. Now type devmgmt.msc and press ENTER.
  2. right click on "Audio device on High Definition Audio Bus" and click Update driver.
  3. Select "Install from a list or specific location".
  4. click on next. Then select "don't search, I will choose the driver to install".
  5. click Next, then select 'audio, video controller and game' in the list.
  6. click Next and then click on disk.
  7. click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click Open and continue with the instructions on the screen.
  
  Similarly install Modem drivers:
  
  Conexant HDAUDIO Soft Data Fax Modem with SmartCP here

  1. right click on "Modem device on High Definition Bus" Audio and click on update driver.
  2. Select "Install from a list or specific location".
  3. click on next. Then select "don't search, I will choose the driver to install".
  4. click Next, then select "Modem" from the list.
  5. click Next and then click on disk.
  6. click Browse C:\swsetup\sp33890 folder and select the .inf (wis30b2b) file and click Open and continue with the instructions on the screen.

• Cannot install drivers windows 7

  Windows 7-64 installing drivers for one D110a wireless network. Drivers were very nice, someday, that nothing prints. In devices and printers, the machine had a warning. Solving the said MC teredo Tunneling adapter could be solved by installing the drivers. Tried to install from there, CD and the Internet. CD and the Internet, I get a 'Fatal error' message without a code. Devices, I get "Can not find the drivers for this printer."  Event Viewer will not display any errors so I can't get a code. No printer listed in "Devices" either.  This has happened before and after trying to install 4 or 5 times it works. Not this time. Cache is cleaned, no known malware.

  Hi @grm8888,

  Thanks for getting back to me.

  Printing and scanning doctor solve this problem?

  When you are in the registry editor.

  2 navigate in the following: HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\TCPIP6\PARAMETERS.

  3. in the pane, right-click disabled and select Edit. Set the value of DWord 0.  There is only one word that starts with the letter D. replace the 0 value, rather than for example: 200

  4 restart your computer and the teredo tunneling adapter turns on.

  If you have any questions, feel free to ask in the comments section below.

  If you encounter the Error Code 10 error, then follow the steps on my Error Code 10 Guide

  Instructions on the page:

  Understanding Teredo

  To better understand the Teredo Tunneling , you must first know what IPv4 and IPv6 . IPv4 is a Protocol IP affecting our computers with a unique address which is our identity to communicate with the world via the internet.

  Most of us, are on the IPv4 technology and so is the rest of the world. However, because of all the available IPv4 addresses being occupied the Internet is running out of IPv4 addresses as more and many of us have begun to use internet and networks strongly that is the main reason that we have now the IPv6 (Internet Protocol Version 6) which brings in countless addresses, which is 2 to the power of 128-2 ^ 128 (340,282,366,920,938,000,000,000,000,000,000,000,000) without end.

  Now that you know about the shortage of addresses IPv4 - it'll be easier to understand what the Teredo Tunneling . IPv4 is still widely used, to put in it, it's simplest form, I would say previously, everyone knew only one language, but now there are two so the person (System) in a language of IPv4 will be understood by the same, but not by those who speak in the language of IPv6, which makes networks communicate with each other is not possible , and internet is all about the connected networks and talk to each other - we need an interpreter to translate IPv4 to IPv6 and vice versa so that's what the Teredo Tunneling , this is an interpreter to treat language v6/v4.

  Card driver Microsoft's Teredo Tunnel

  In this section, I'll show you how to install the Teredo Tunneling adapter under Windows 7 - driver is built into Windows 7.

  1. to install it go to Device Manager OR hold Windows key and press R. In the race of dialogue that opens, type hdwwiz.cpl and click OK.

  

  2. once in the Device Manager -> click on network adapters

  

  3. then click on the Actions of the top tab and select "Add Legacy hardware.

  

  4. click on Next and following once again and once again (it will not find anything, worry not). You will then be brought to types of common hardware, select.

  5 scroll and select the network adapters , and then click Next. You'll now be adding hardware dialog box.

  6. now, manufacturer tab select Microsoft then from the network adapter tab, selectMicrosoft Teredo Tunneling adapter and click Next.

  

  7. After you click Next, click on Next again, and then click Finish.

  8. now download Malwarebytes Anti-Malware by clicking on the link below. Unfortunately, anti-virus software is like Norton, AVG and McAfee will not protect you against malware that can cause serious corruption so you need Malwarebytes to make a complete analysis. I highly recommend to get the premium version which will protect you in real time of the infection in the future against malware that can cause corruption, but if you do not want to buy then you can just get the free version.

  9. once it has been downloaded, install it. Open it and go to the Scan tab-> custom-> check scanning put in all the boxes in the left pane and select your drives in the right pane. Make sure you select all the boxes in the left pane, including the 'Rootkits Scanner"and click on"Scan"and wait for analysis at the end, it may take 4 to 6 hours, once finished, scan select ' quarantine all.

  

  Teredo Tunnel error should now be resolved, however, if you see a yellow exclamation mark then follow the steps below:

  1. open the Registry Editor.   How to open the registry editor

  2 navigate in the following text: HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\TCPIP6\PARAMETERS.

  3. in the pane, right-click disabled and select Edit. Set the value of DWord 0. There is only one word that starts with the letter D. replace the 0 value, rather than for example: 200

  4 restart your computer and the teredo tunneling adapter turns on.

  If you have any questions, feel free to ask in the comments section below.

  If you encounter the Error Code 10 error, then follow the steps on my Error Code 10 Guide

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!