Cannot install Epson XP-215 printing software

When I try to install my XP Epson-215 software on my laptop I get the message "error occurred [0-1].

Hi Elizabeth,.

What is the full error you receive when you try to install the printer?

I wish that you run the Microsoft fixit and then try to install the printer.

Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/

Hope this helps and keep us informed if you need help.

Tags: Windows

Similar Questions

  • Cannot install Epson Photo R300 printer on Wndows XP

    I have an Epson Photo R300 printer which I'm unable to install on my windows XPS. I don't have an installation disc and my system has recently been wiped and restarted. The installation wizard does not include the R300 model. Please notify.  R. beck

    Hi raybeck,.

    You can follow the steps in this link & check if it helps:

    Can not find the driver for Epson R300 printer - for Win 7 Pro 64 bit disk

    Hope the helps of information.

  • How to install EPSON STYLUS TX135 PRINTER

    How to install EPSON STYLUS TX135 PRINTER

    Concerning

    Hello

    Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
    responsible for the proper functioning of the printer and their drivers provided.

    Epson - Support us.
    http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

    Epson - support from Europe
    http://www.Epson.co.UK/support

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Cannot install my Lexmark 8300 printer all in one

    Cannot install my Lexmark 8300 printer all in one

    http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US%20&segment=download

    Read the above, after typing in a Lexmark 8300 printer:

    Please start typing your model number to find your product.

    Please try again. There was no product found for this model:

    Printer Lexmark 8300

    Contact Lexmark

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot install laserjet pro p1102w printer, usb error, please help?

    I was able to print things in the past using the USB of my printer. After I reformatt my computer, I tried to plug in the usb from the printer to the pc, the usb will not be installed, it has an error message that it could not reconigze the computer or something, I have a triangle of yellow warning next to the serial bus controller universal usb. I tried the update, but it cannot update, I tried to plug and plug it into the usb, I tried manually install printer in devices and printers, and yellow triangle still in the pc. Please help, I have a home edition of Windows 7 64-bit. And I recently change my network wireless after reformatting, but that any prior to reformatting, cause I have change the wireless network and still able to print, but after I can not format. Help, please

    Hi cowmanchess,

    It seems that you are having problems with your USB port on the computer.

    Have you tried using a different USB port on the computer?

    Have you tried a new USB cable?

    How long is the USB cable you are using?

    You have a USB hub between the printer and the computer?

    Unplug the USB cable and then download the software on the link below. Wait that the installation of the software requires you to connect the cable. Let me know if you get the printer installed?

    Driver and software of HP LaserJet Full Feature

  • Cannot install the MFP M177fw printer driver

    I try again to install the driver and follow the instructions at the bottom of the link but still cannot install. I start small windows and even to create a new user, but can not run.

    http://h30434.www3.HP.com/T5/printer-software-and-drivers/not-able-to-install-a-driver-for-MFP-M177f...

    I use windows 10 try to connect with the wireless option that the printer is in another room. The printer is connected to the router and ping is passthrough. But during the installation, the installer cannot find the printer. I will provide the number IP Installer but nothing helped.

    Can I do to install? Thank you.

    Rgds,

    Tony Thk

    Hi @TonyThk,

    Thank you for showing interest in the Forums of HP Support!

    I understand that you are unable to install the printer wireless. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I see that you have followed the steps in the post you mentioned. In addition to these steps, try the following.

    Tips for a successful wireless connection:

    • What type of encryption are you helping? HP recommends WPA or WPA2.
    • Using a unique network name (SSID).
    • Avoid using filtering by Mac address of the router.
    • Make sure you have 802.11 g active.
    • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
    • Don't hide your SSID (network name).
    • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
    • You have a switch or an extra router?
    • Do not use a network of comments (SSID).
    • Disable UPnP on the router.
    • Set the router to 20 Mhz only, or 145Mbps depending on the router.
    • Update the firmware on the router.

    Disable IPV6 in front panel of the printer menu:

    1. Configuration menu
    2. Network configuration
    3. Network services
    4. IPv6, select disabled.

    If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

    To assign the static IP address, use the following steps as a guide.

    1. Print a Page of Network Configuration menu of the printer front panel. Note the IP IPV4 of the printer address.
    2. Type the IP address in the browser to bring up the SAP.
    3. Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
    4. Select Manual IP.
    5. Enter your IP address manual (192.168.0.232)
    6. Enter 255.255.255.0 for the subnet mask, except if it is different.
    7. Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
    8. Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
    9. Click on apply.
    10. Restart the router, the printer and the computer.
    11. Test print.

    Ensure that your router and firewall do not block these ports.

    • UDP ports: 427, 137, 161
    • TCP port: 9100
    • Card photo upload:
    • UDP ports: 137, 138, 427
    • TCP port: 139
    • Scanning:
    • UDP port: 427
    • TCP ports: 9220, 9500
    • The HP device status:
    • UDP port: 161
    • Sending faxes:
    • UDP port: 427
    • TCP port: 9220
    • Installation of the HP device:
    • UDP port: 427
    • Ports of Web Services:
    • UDP and TCP: 80, 443, 5222 and 5223
    • Hello Ports:
    • TCP and UDP: 5353 and 5297, 5298

    Update the firmware of the printer:

    • Click here to download and install the update of the firmware of the printer.
    • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
    • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
    • Try to install the USB printer.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • Because I installed a Satellite L300 printing software stopped working

    Hello!

    I'm new here so not sure if I'm posting in the right place. Mods, please do not hesitate to go to the relevant section, thank you.

    OK, I have a Toshiba Satellite L300 laptop and since I installed a printing software Wednesday evening, my laptop suddenly stopped working!

    Since Thursday night, I tried to make it work, but I am faced with this message:

    When I load up, it goes to Windows error recovery:

    "windows does not start.a recent hardware or software change might be the cause.

    If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.if power was interrupted during startup, choose start windows normally"

    then it gives two options: Launch Startup Repair (recommended)
    Start windows normally
    ==========
    -then I click on (recommended) launch Startup Repair
    -then a scren called load' system recovery options «...» It is said: select an operating system to repair, click next.only windows vista listed operating systems and can be repaired

    If you do not see your operating system listed, click load drivers to load the drivers for your hard disks...

    but nothing comes up so I click load drivers and it gives me just loads of records at random... and I don't have any idea those to load
    ========
    5 years report an abuse
    Additional details
    so I click "next".
    ========
    Then, I have 5 options:
    -Startup Repair
    -system restore
    -windows complete pc restore
    -windows memory diagnostic tool
    -command prompt
    ==========
    Startup Repair says that manually, it can't solve any problems

    -simply said system restore your computer is located in a limited State, and this action can not be changed... but there is no option to do so

    -restoration of windows complete pc says I need to insert a backup disk which I do not have

    diagnostic tool memory Windows says that windows blocks it
    ============
    but on restoring system it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
    but I don't no where... I typed in the command prompt, but don't understand how to use it
    =========
    I also tried to click Start windows normally, but it won't work

    If the problem is the software installed, start Notepad in safe mode and try to start restoring the system from there.
    Please let me know what options are available. Can roll you back OS a few days back?
    Are some that are listed restore points?

  • Install the Kodak ESP5250 printer software and install Windows updates

    My father-in-law bought a Kodak ESP5250 printer last week, we tried to install the software without success. I was even in remote access with Kodak technology for 5 hours. There seems to be a problem with Windows Vista that will not allow the software to install. In addition, the automatic update of Windows has tried for more than a week to download and install updates of security on his computer, he has let stand for 24 hours and it will not install updates.
    He runs a Dell 1545 with Windows Vista service pack 2 Dual Core T4200 CPU and 3.0 GB of RAM.
    Can you help me solve these problems?

    Hi kcbell1953,

    Thank you for the information.

    Did you follow the steps I have provided?

    I suggest to follow the steps mentioned in the previous post and then try to install the printer software.

    You can try the following steps to install the windows updates:

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    Step 2: Disable security software, follow the steps mentioned below

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Activate security software once everything is done.

    Step 3: Put the computer in a clean boot

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Now try to install the updates, try to install only some updates at the same time.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot install Blue Squirrel ClickBook "print processor does not appear to be installed corectly. The printer name is invalid. "Printer - 20 and 1798 error error code"

    OT: Print processor.
    During the installation of Blue ClickBook squirrel (for windows7) I get the message "the print processor does not appear to be installed corectly.  The print processor is unknown.  The printer name is invalid.  Also "printer error code - 20 and the 1798 error.»  I need CBWP. DLL to work properly in order to be able to use this program.

    Hi Chancey,

    1. are you able to install other applications?
    2. are you able to print from other applications?

    If the problem is with the book in a Blue Squirrel click, then I suggest you to contact the manufacturer for support.

  • Cannot install Epson perfection 1240u

    I can't install Epson perfection 1240u on Windows 8, I tried looking for drivers on Epson and Microsoft site but no luck.  Now I have a scanner is worth a lot of money that I can't use.  Ideas please

    Hello

    Thanks for posting your question on Microsoft Community!

    After your description, it seems that you need more information about the installation of Epson perfection 1240u.

    Install the Epson perfection 1240u in compatibility mode Windows 7.

    I suggest you to download and install the Windows 7 compatible driver in compatibility mode.

    You can download the driver from the following link.

    Epson perfection 1240u

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=14549&prodoid=54582&infoType=downloads&detected=Yes&platform=OSF_W_7-32

    What is program compatibility?

    http://Windows.Microsoft.com/en-GB/Windows-8/what-program-compatibility

    Make older programs compatible with this version of Windows

    http://Windows.Microsoft.com/en-GB/Windows-8/older-programs-compatible-version-Windows

    Compatibility Center.

    http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

    Hope the above information helps. Please let us know if you need assistance, we will be happy to help you!

  • Cannot install Epson TMU 220 d (Parallel Port) printer

    First of all, let me start by saying that I am using this printer on the same machine for a few years, but every time I format my hard drive and install windows after I always have a time hard the installation of printer on the SAME machine.

    I installed Windows 7 Ultimate (64 bit), I matrix Epson - TMU 220 D printer with a parallel cable to print.

    However as I don't have a parallel port on the motherboard, I put a map for this from bigning.

    Now when I give a print command it only prints and when I check the printers and devices, it is said that the printer is offline (even though it is very well connected by cable and is switched on!)

    OK I have finally, after many adventures have found a solution.

    Its Port LPT driver,.

    You see, I bought this last motherboard from Gigabyte which did not have a Port LPT printer on it, so I bought a "PCI to port parallel Card", so when I tried to install the printer with the latest Epson drivers they did install the latest version of the required software, but could never find a LPT port where he could search for the printer and so theoretically only it has been installed and that in a measure limited.

    Details:

    The card came with a cd with drivers. If initially, I managed to install the printer, but later on when I upgraded to windows 7 64 bit... Two things created problem that were:

    1 PCI to the port PARALLEL card drivers were not compatible with my new operating system i.e. windows 7 64 bit (either they were too old... or I guess they were 32-bit). So I had to open my office pc and see the name of the manufacturer on the card (or through DEVICES ENTER) and asked them to send me a mail pilot - they were very cooperative. Through the channels if you are unable to get the driver for some reason, I suggest buying a new card as its very cheap about $ 6 and you'll get a cd of drivers with it - ensure that its 32 / 64 and is your compatible windows before you buy.

    2. in the second place the TMU 220 d drivers that I had download were too old and I guess only 32 bits (not really sure of the part of bit if)

    So once I got the latest driver from the manufacturer of the PCI... I was able to install the printer... as above, the printer driver failed to install printer correctly because he did not have any LPT port on my computer!

    But before anything check if the printer cable WORK... because sometimes it will suddenly died and you think... There will be problem in there as it was working until yesterday... then before going to all the trouble sound good to check that too! Like Epson TMU 220 D is very robust and would get rarely defective.

  • Cannot install Lexmark X 4270 printer drivers in my computer because the version of windows. Can u correct E-mail website to allow me to install the drives.

    I have laptop Dell Studio 1537. Operating system is Vista. I have Lexmark X 4270 all-in-one printer, but I can't install the drivers of software due to the version of windows. Can u pl advise me what to do. If you can send an email the correct site where I can see readers. Then I can download fdrom Web site.

    Thank you.

    Diakite in Sri Lanka.

    Hello

    Download your drivers from the link below

    Choose the right operating system it

    http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_X4270&page=product&FromPage=null#2

  • Cannot install my hp l7590 printer my printer connected to the network via another computer

    I have win 7 computer and the printer attached to the xp computer

    When I click on add a printer, I can see the printer but when I try to install it

    Windows says it can't find the driver in the network after watching it in windows update

    I tried to find it manually in the directory of the software for the printer hp, but I don't know which

    Using INF file

    If anyone can help me

    I will appriceciate it.

    in amir thanks

    Hi amir40,

    You have a more intermittent connection if you connect the printer to your router and then install the printer on computers using the network. Here is a document on how to connect the printer to your router.

    http://support.HP.com/us-en/document/c02279915

    If you want to continue with the print share. See the following document below.

    http://search.Microsoft.com/en-us/results.aspx?q=printer+sharing+USB

  • Cannot install the Kodak wireless printer.

    Original title: http://windows.microsoft.com/en-us/windows8/install-a-printer

    Trying to install a Kodak printer to a computer from hp via a wireless connection and can't find the printer.

    Is this recent post offers you clues?

    Epson printer WF-2510 with wireless-"printer not connected."

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Epson-printer-WF-2510-with-wireless-connection/5ed27221-0cc3-4725-bdd0-2a56ecd9ba65

  • PSE9 cannot import Epson scanner or print on HP printer

    I just installed PSE9 on my computer.  I have Windows7 64-bit operating system.  I have an Epson Scanner Perfection.  What should I do to have my scanner enter in PSE?  When I arrived at the file, import - the scanner is not there.  I downloaded the drivers for the scanner or updates and still nothing works.

    Also, when I try to print anything the editor, the file is automatically sent to the part of screen printer fax.  I checked all the settings and there is no indication that this should go to the part of the printer fax.

    I tried to reinstall the printer and the scanner and PSE9.  Nothing works!  Help please.

    Thank you

    Rename the name of your printer in another name and then try to print. It could be the case that some initial number. printer and fax of characters in the name are the same and causing problem.

    -Garry

Maybe you are looking for

  • iMessage on iOS iPhone crash 6 9.3.1

    I'll have iMessage crashing on my iPhone with iOS 9.3.1 6 for since the morning of Monday, may 8, 16. When I start iMessage on iPhone, it did something for a few seconds and then crash. No message is displayed. I am able to access messages using Appl

  • How to make a recovery disk for hp 13 stream backup DVDs

    I have my Stream 13 running nice and tidy and wish now to make a series of DVDs for a full recovery. Edit, I have new drives and an external Samsung DVD recorder Can you give me a piecemeal format. (Grandma hair .silver doh!) as a precaution, my disc

  • Login screen will not Ctrl + Alt + Del with on screen keyboard (OSK)

    I have a Windows 7 Pro with a touchscreen monitor industrial machine (ok, actually I have 2). My intention is to use it without ever requiring a physical keyboard. It works perfectly, I've set the OSK up automatically on the screen what he does and I

  • How can I stop my screensaver to come so fast?

    original title: HOW can I STOP MY 'SCREEN SAVER' OF COMING ON so FAST/FAST? WEN IM ON MY COMPUTER AND I LET ABOUT THIRTY SECONDS, IT GOSE RIGHT TO THE SCREEN SAVER, AND I WANT TOO GO TO THE SCREEN SAVER FAS YES! .... HOW DO I SET IT SO THE TI TOO WIL

  • Can not uninstall or install the photosmart software 6510

    After having been frustrated that the printer driver for my new 6510 than anything a printer would claim that the printer was not connected to the network, when at the same time of the same system that the browser he could speak without difficulty, I