Cannot install ios with itunes

Similar Questions

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• Cannot install iOS 9.3.1

  I downloaded the updated iOS (9.3.1) but cannot install it.

  I made sure I got enough memory on my phone and the battery charge, but it will not install. Can someone help me?

  Thank you!

  Hi moppsy,.

  Thank you for using communities Support from Apple!

  Leave your post, sounds like you downloaded the iOS 9.3.1 update live, but have not been able to install it. We know that this type of situation can be frustrating, but we are here to help.

  To resolve this situation, I would recommend the work done these steps in the following article.

  Delete and redownload the update iOS

  If you can't always install the latest version of iOS, try to download the update again:

  1. Go to settings > general > storage & use of iCloud. Under storage tap manage storage.
  2. Find that the iOS to update in the list of applications.
  3. Press the update IOS, then remove the update.
  4. Go to settings > general > software update and download the latest iOS update.

  If the problem happens again, try to update with iTunes.

  Get help with updates of live iOS - Apple Support

  Best!

• Cannot install iOS 10

  I can't install iOS on my iPhone 10 6. Whenever I try to do wireless it just says: "there was a problem while installation of ios 10» It does say what the problem itself. And when I try to do this through itunes, it says only: to connect my iPhone with a USB key even if it is already connected, I tried with two different cords, and none of them does my phone appear.

  On your PC, uninstall iTunes and Apple Mobile Device Support to uninstall. You must uninstall both and reinstall iTunes, plug in your phone and update.

• Cannot connect iphone with itunes

  Hello

  I just bought a new Iphone s 6 pluss, but I can't connect with itunes on my Mac, whenever I plug the usb into my Mac, a window appears and tells me that itunes can't find my iphone because he wants a future verson of itunes. But I have the latest verson of Itunes (12.2.2.25). I tried to reinstall itunes several times and it still shows the same message. However, I can connect my old iphone (5 s) easy way to itunes on mac even. My mac is a macbook air 11 "2011 running on Mac OS X Lion 10.7.5 (11G63b)

  Those who are familiar with the problem, or know how I can fix this?

  Thank you

  You have the latest version of iTunes that can run OS X 10.7.  However, it is not the latest version of iTunes (12.3.2), which is required for the iOS interface 9.

  The issue is that Lion has now more than four years.  You need to upgrade your OS X to launch iTunes 12.3.2.  You need at least OS X 10.8.5 (current is OS X 10.11.2).)

  Install El Capitan (OS X 10.11):

  Update of OS X El Capitan - Apple Support

  Then go to the App Store and update all your applications.

• Cannot install iOS 9.3

  When I try to install iOS 9.3, get a message that can not install because it is no longer connected to the Internet, how can this be corrected?

  Apple withdrew temporarily updating iOS 9.3 for devices more old to deal with some issues, what he was creating. Better to wait a few days for them to correct problems.

• Cannot install iOS 9.3 on my iPad. Said that I'm not connected to the internet

  CCannot install iOS 9.3 on my iPad. Said that I'm not connected to the Internet. Router rebooted, says even I'm not connected.

  I have this same problem with my iPhone 5 s. hope someone can provide an answer.

• Cannot install win7 with USB

  I can't install win7 with my key USB got the error msg like "Setup could not create a new partition or system to locate a system partition. see logs of installation for more information". don't know how to go further. any ideas? and the partition type is "primary". other partitions are of type "logical." help me pls...

  Try the following:
  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  If the problem persists, you can reinstall Windows XP, update your BIOS then try the installation again. Its possible that you have created the bootable USB key is damaged, try to create another copy, or try to install using a dvd player external usb.

• Error 1723 - cannot install anything with a .msi installer

  I understand that this kind of question has been asked several times on this here that I searched, however still have not been able to solve the problem :(

  Basically, I'm unable to install anything with .msi (windows package install), I get the error messages like:
  "There is a problem with this windows package install." A DLL required for this install to complete could not be run. Contact your provider to support personal or package"
  OR
  "Installation directory must be on a local hard drive" (even if this is the case).
  It is not with a specific software, I have a problem with. For example I tried to install Acrobat, Quicktime, rhinoceros (3d software) and T-splines (plugin for Rhinoceros)... which was a mistake and had some msi installers, so I think its safe to assume this is not not the software, but a problem with my computer, and I suspect the registry eventually.
  Things I've tried so far without success
  • sfc/scannow
  • Microsoft fix it tool
  • Checked the status of windows install services (it was in operation)

  The only thing that I came close to using 'run as administrator' with quicktime as it was the only program which enabled this option as an msi file. This actually worked and was able to replace the DLL error somehow and install quicktime.
  Any help is really appreciated, I hope that his is not going to use a new installation on win 7 :(

  None of the above worked, unfortunately, but don't worry...

  ... I FIXED IT
  Here's how
  I resorted to a repair of windows 7 by using the support of instillation DVD/ISO/USB of my version on win 7 (it is actually an upgrade, wait for your upgrade to the exact version even though it should work with your key)
  I followed these instructions to the repair facility
  http://www.SevenForums.com/tutorials/3413-repair-install.html
  Don't worry, you won't lose any files, but I would still recommend making a return to the top.
  I use Macrium reflect free http://www.macrium.com/reflectfree.aspx
  OR you can simply backup your stuff important to usb. But like I said, you shouldn't lose anything, and all programs will be installed as well.
  If you do not know your key (for when he asks during the upgrade) Windows use magical jelly bean before starting the upgrade and take notehttp://download.cnet.com/Magical-Jelly-Bean-Keyfinder/3000-18487_4-10079600.html keyfinder
  NOTE: After you completed the upgrade and to my office, I was greeted with the notification

  "Setup has detected that .NET Framework 4 needs to be repaired. Do not restart your computer until the repair is completed. »

  It is perhaps was necessary to repair? I don't know, but it took about 10-15 mins to fix it for me.
  Anyway, the bottom line is, so far, everything works well again, I can install msi without problem, I will report back if I get more specific questions, but fingers crossed I don't want.

• Cannot install iOS app 7: PackageInspectionFailed, had no bundle identifier

  My adobe air 3.8 powered application can be installed and ipads runon running ios 5 and 6.

  But the same apk file cannot be installed on an ipad ios 7 (11A4449d) running.

  I have install the application using adt.  I tried in provision of development and provision of ad hoc. same result.

  Here is the error of the iphone console logs:

  August 30 at 17:24:25 mc_mobile_tunnel Issa-mato-iPad [168] < reviews >: (Note) MC: mc_mobile_tunnel from.

  August 30 at 17:24:33 mobile_installation_proxy Issa-mato-iPad [151] < WARNING >: LaunchServices: Please include the kCFBundleIdentifierKey in the dictionary of options during the installation of an application.

  August 30 at 17:24:33 mobile_installation_proxy Issa-mato-iPad [151] < WARNING >: LaunchServices: install app placeholder existing (null)

  August 30 at 17:24:33 Issa-mato-iPad installed [60] < reviews >: 0 x 295000 handle_install_for_ls: install the ' / var/mobile/Media/PublicStaging/IDA.ipa ' requested by mobile_installation_proxy

  August 30 at 17:24:35 mc_mobile_tunnel Issa-mato-iPad [168] < reviews >: (Note) MC: mc_mobile_tunnel close.

  August 30 at 17:24:39 Issa-mato-iPad installed [60] < error >: 0 x 295000 peruse_package: App info dict loaded from "/ var/tmp/install_staging.rpo8d8/foo_extracted/Payload/IDA.app" had no bundle identifier

  August 30 at 17:24:39 Issa-mato-iPad installed [60] < error >: 0 x 295000 stage_package: could travel package at /var/tmp/install_staging.rpo8d8/foo_extracted

  August 30 at 17:24:39 mobile_installation_proxy Issa-mato-iPad [151] < error >: 0 x 345000 MobileInstallationInstallForLaunchServices: failed with-1

  August 30 at 17:24:39 Issa-mato-iPad installed [60] < error >: 0 x 295000 MobileInstallationInstall_Server: could not organize the package

  August 30 at 17:24:39 Issa-mato-iPad mobile_installation_proxy [151] < WARNING >: ERROR: MobileInstallationInstallForLaunchServices returned Nile

  August 30 at 17:24:39 Issa-mato-iPad mobile_installation_proxy [151] < error >: 0 x 345000 handle_install: Installation failed: field = LaunchServicesError Code = 0 error "the operation could not be completed. (Error 0 LaunchServicesError.) "UserInfo = 0 x 16610680 {error = PackageInspectionFailed}

  August 30 at 17:24:39 Issa-mato-iPad installed [60] < error >: 0 x 295000 handle_install_for_ls: API failed

  is this a bug in adobe air sdk?

  The problem was caused by the presence of a folder called 'resources' packaged in the ipa:

  Here's the line of bad passed to adt in ant:

  Once I changed it 'resources' to something else, the installation worked on ios 7.

• Archive a backup iOS with iTunes on a PC

  I want to check my back upwards into iTunes so that I can try the beta of iOS 10. When I go into Preferences > devices > backup device I can point to back up that I want to archive, but when I use CTRL + 'click' I do not get the submenu to archive. I know that's the way I've archived on my mac mini, but since changing to a PC using Windows 10 I can't seem to find a way to archive. Is there another way or something because I don't want the beta iOS without it.

  Hi Philogic,

  I understand that you want to archive your backup iOS, but you don't see the context menu for it. I know it's important to be able to have a copy of security of your backups, so I'm happy to provide some clarification for this.

  You're definitely on the right track with your steps so far. Since you are using Windows, however, instead of ctrl + click, you just right click of the backup. You will find the following menu is what you are used to.

  Thank you for using communities of Apple Support, cheers!

• Cannot install iOS 9.1

  My name is Hamidar Chanzi of Tanzania. I bought my new iPhone more than 5 s about two weeks ago and it was good work. But now the problem to communicate with others (always indicate ' search'). Also required to update.  I was downloading the iOS 9.1 software success BUT failed to install on my phone as I got the notification as software update is not available. try again later".» But now almost two days and I still get the same notification

  Details of my iPhone from apple as follows:

  Capacity: 11.9 GB

  Version: 9.0.2 (A 13, 452)

  Product: apple iPhone 5 S

  Please

  Check your Internet connection, restart/reset the phone and try to update the device a new.

• Cannot install error with DSOUND.dll DirectX

  my computer won't let me stall Directx, it said something about will check the logs of DirectX. I'm confusedand don't know whatto do. Icant open my cause of itunes, I get an error message that says bad image. Help?

  Hello

  · Which version of DirectX you are trying to install?

  · Provide us with accurate and complete error messages that you receive to help us better solutions to the problems.

  · Do you remember all the recent changes on the computer before the show?

  You can check the link below to determine the version of DirectX using the DirectX Diagnostic tool: http://support.microsoft.com/kb/157730

  Also, follow the below listed methods:

  Method 1:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  Method 2:

  Follow the instructions in the article of Apple to remove all instances of iTunes and then reinstall.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

• Cannot install iOS 9.2.1

  When my iOS downloaded then I try to install, but it shows the audit has not an error occurred . My camera's iPhone 6 more. A

  Please tell me what I can do?

• Cannot install Windows with BootCamp

  Hi guys!

  I have a Macbook Pro 15ich Early 2011 Intel Core i7 2 GHz 16 GB RAM disk 'Captain' with dual operating system, Samsung SSD 840 EVO drive, and HARD drive that came with the laptop is my auxiliary drive.

  I have two problems.

  (1) when I want to make the Boot Camp partition, I opened the app, and I do Boot Camp with the DVD options, I don ' t have the possibility of USB, I try to edit the info.plist is the administrator and I n ' have permission, I lost the permission when I arrived at the happy record.

  (2) I can't do the Boot Camp with USB I did a DVD with an external DVD drive. I can make the partition, but my problem comes when my Mac reboots to install W7 and W8 and typical black screen of MSDOS with the underscore "_" appears flashes all the time. I waited for minutes, hours, day and the laptop do not respond.

  What can I do?

  Kind regards
  Alex.

  riiKu wrote:

  (2) I can't do the Boot Camp with USB I did a DVD with an external DVD drive. I can make the partition, but my problem comes when my Mac reboots to install W7 and W8 and typical black screen of MSDOS with the underscore "_" appears flashes all the time. I waited for minutes, hours, day and the laptop do not respond.

  What can I do?

  Kind regards
  Alex.

  During the installation of Windows Setup started and you have the screen which shows your partitions and to choose one, you choose your Bootcamp partition and click on Format of below the list of partitions? You must leave the configuration format the Bootcamp in NTFS partition before installing Windows actually.